(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Jector Punch Blanks for Heavy Load with Dowel Holes

Jector Punch Blanks for Heavy Load with Dowel Holes

Click this image to zoom it.

Move the mouse over the image to zoom

This blank has a dowel hole for positioning in the brim, strengthens the brim, and has a jetter pin built into the punch before processing the punch tip. It has been heat treated and the shank diameter D has been finished to the specified tolerance.

  • FLANGE
  • SKH51
  • POWDER HSS

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
AHJB-C10-[60-100/10]
AHJB-C10-LC[50-99.9/0.1]
AHJB-C13-[60-100/10]
AHJB-C13-LC[50-99.9/0.1]
AHJB-C16-[60-100/10]
AHJB-C16-LC[50-99.9/0.1]
AHJB-C20-[60-100/10]
AHJB-C20-LC[50-99.9/0.1]
AHJB-C25-[60-100/10]
AHJB-C25-LC[50-99.9/0.1]
AHJVB-C10-[60-100/10]
AHJVB-C10-LC[50-99.9/0.1]
AHJVB-C13-[60-100/10]
AHJVB-C13-LC[50-99.9/0.1]
AHJVB-C16-[60-100/10]
AHJVB-C16-LC[50-99.9/0.1]
AHJVB-C20-[60-100/10]
AHJVB-C20-LC[50-99.9/0.1]
AHJVB-C25-[60-100/10]
AHJVB-C25-LC[50-99.9/0.1]
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSJector D (Shank diameter)
(mm)
L (L dimension)
(mm)
S dimension
(mm)
LC (Full length alteration)
(mm)
1 Piece(s) 7 Day(s) 10Standard type1060 ~ 10028-
1 Piece(s) 7 Day(s) 10Standard type10-2850 ~ 99.9
1 Piece(s) 7 Day(s) 10Standard type1360 ~ 10036-
1 Piece(s) 7 Day(s) 10Standard type13-3650 ~ 99.9
1 Piece(s) 7 Day(s) 10Standard type1660 ~ 10036-
1 Piece(s) 7 Day(s) 10Standard type16-3650 ~ 99.9
1 Piece(s) 7 Day(s) 10Standard type2060 ~ 10036-
1 Piece(s) 7 Day(s) 10Standard type20-3650 ~ 99.9
1 Piece(s) 7 Day(s) 10Standard type2560 ~ 10036-
1 Piece(s) 7 Day(s) 10Standard type25-3650 ~ 99.9
1 Piece(s) 9 Day(s) or more 10Spring and pin reinforced type1060 ~ 10028-
1 Piece(s) 9 Day(s) or more 10Spring and pin reinforced type10-2850 ~ 99.9
1 Piece(s) 9 Day(s) or more 10Spring and pin reinforced type1360 ~ 10036-
1 Piece(s) 9 Day(s) or more 10Spring and pin reinforced type13-3650 ~ 99.9
1 Piece(s) 9 Day(s) or more 10Spring and pin reinforced type1660 ~ 10036-
1 Piece(s) 9 Day(s) or more 10Spring and pin reinforced type16-3650 ~ 99.9
1 Piece(s) 9 Day(s) or more 10Spring and pin reinforced type2060 ~ 10036-
1 Piece(s) 9 Day(s) or more 10Spring and pin reinforced type20-3650 ~ 99.9
1 Piece(s) 9 Day(s) or more 10Spring and pin reinforced type2560 ~ 10036-
1 Piece(s) 9 Day(s) or more 10Spring and pin reinforced type25-3650 ~ 99.9

Loading...

  1. 1
 

Basic Information

Heavy-load punches Yes Shank type Blank Material SKH51 Equivalent
Surface treatment None Shank (mounting part) shape With locating dowel hole Shank diameter D tolerance m5
T (Head thickness/plate thickness)(mm) 8

Tech Support

Press
Tel:021-8990-5801 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)