(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Non-clogging Button Dies -Straight Type-

Non-clogging Button Dies -Straight Type-

Click this image to zoom it.

Move the mouse over the image to zoom

This is a straight button die that is intended to be used in conjunction with a suction device such as a vacuum pump to prevent scraps from rising and clogging thin plate materials. An air inlet hole is provided near the die tip to create air flow inside the button die when suction is performed using a vacuum pump, etc.

  • PRESS-FIT
  • SKD11
  • POWDER HSS

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
SV-MSD3-[16,​20]-P[0.5-1/0.01]
SV-MSD3-[16,​20]-PC[1.01-1.2/0.01]
SV-MSD3-LC[10-19.9/0.1]-P[0.5-1/0.01]
SV-MSD3-LC[10-19.9/0.1]-PC[1.01-1.2/0.01]
SV-MSD3-SLC[10-19.99/0.01]-P[0.5-1/0.01]
SV-MSD3-SLC[10-19.99/0.01]-PC[1.01-1.2/0.01]
SV-MSD4-[16,​20,​22,​25]-P[0.5-2/0.01]
SV-MSD4-[16,​20,​22,​25]-PC[2.01-2.2/0.01]
SV-MSD4-LC[10-24.9/0.1]-P[0.5-2/0.01]
SV-MSD4-LC[10-24.9/0.1]-PC[2.01-2.2/0.01]
SV-MSD4-SLC[10-24.99/0.01]-P[0.5-2/0.01]
SV-MSD4-SLC[10-24.99/0.01]-PC[2.01-2.2/0.01]
SV-MSD5-[16,​20,​22,​25]-P[0.5-2.5/0.01]
SV-MSD5-[16,​20,​22,​25]-PC[2.51-2.7/0.01]
SV-MSD5-LC[10-24.9/0.1]-P[0.5-2.5/0.01]
SV-MSD5-LC[10-24.9/0.1]-PC[2.51-2.7/0.01]
SV-MSD5-SLC[10-24.99/0.01]-P[0.5-2.5/0.01]
SV-MSD5-SLC[10-24.99/0.01]-PC[2.51-2.7/0.01]
SV-MSD6-[16,​20,​22,​25]-P[1-3/0.01]
SV-MSD6-[16,​20,​22,​25]-PC[0.5-0.99/0.01]
SV-MSD6-[16,​20,​22,​25]-PC[3.01-3.2/0.01]
SV-MSD6-LC[10-24.9/0.1]-P[1-3/0.01]
SV-MSD6-LC[10-24.9/0.1]-PC[0.5-0.99/0.01]
SV-MSD6-LC[10-24.9/0.1]-PC[3.01-3.2/0.01]
SV-MSD6-SLC[10-24.99/0.01]-P[1-3/0.01]
SV-MSD6-SLC[10-24.99/0.01]-PC[0.5-0.99/0.01]
SV-MSD6-SLC[10-24.99/0.01]-PC[3.01-3.2/0.01]
SV-MSD8-[16,​20,​22,​25]-P[1-4/0.01]
SV-MSD8-[16,​20,​22,​25]-PC[0.5-0.99/0.01]
SV-MSD8-[16,​20,​22,​25]-PC[4.01-4.2/0.01]
SV-MSD8-LC[10-24.9/0.1]-P[1-4/0.01]
SV-MSD8-LC[10-24.9/0.1]-PC[0.5-0.99/0.01]
SV-MSD8-LC[10-24.9/0.1]-PC[4.01-4.2/0.01]
SV-MSD8-SLC[10-24.99/0.01]-P[1-4/0.01]
SV-MSD8-SLC[10-24.99/0.01]-PC[0.5-0.99/0.01]
SV-MSD8-SLC[10-24.99/0.01]-PC[4.01-4.2/0.01]
SV-MSD10-[16,​20,​22,​25]-P[2-6/0.01]
SV-MSD10-[16,​20,​22,​25]-PC[1-1.99/0.01]
SV-MSD10-[16,​20,​22,​25]-PC[6.01-6.2/0.01]
SV-MSD10-LC[10-24.9/0.1]-P[2-6/0.01]
SV-MSD10-LC[10-24.9/0.1]-PC[1-1.99/0.01]
SV-MSD10-LC[10-24.9/0.1]-PC[6.01-6.2/0.01]
SV-MSD10-SLC[10-24.99/0.01]-P[2-6/0.01]
SV-MSD10-SLC[10-24.99/0.01]-PC[1-1.99/0.01]
SV-MSD10-SLC[10-24.99/0.01]-PC[6.01-6.2/0.01]
SV-PMSD6-[16,​20,​22,​25]-P[1-3/0.01]
SV-PMSD6-[16,​20,​22,​25]-PC[0.5-0.99/0.01]
SV-PMSD6-[16,​20,​22,​25]-PC[3.01-3.2/0.01]
SV-PMSD6-LC[10-24.9/0.1]-P[1-3/0.01]
SV-PMSD6-LC[10-24.9/0.1]-PC[0.5-0.99/0.01]
SV-PMSD6-LC[10-24.9/0.1]-PC[3.01-3.2/0.01]
SV-PMSD6-SLC[10-24.99/0.01]-P[1-3/0.01]
SV-PMSD6-SLC[10-24.99/0.01]-PC[0.5-0.99/0.01]
SV-PMSD6-SLC[10-24.99/0.01]-PC[3.01-3.2/0.01]
SV-PMSD8-[16,​20,​22,​25]-P[1-4/0.01]
SV-PMSD8-[16,​20,​22,​25]-PC[0.5-0.99/0.01]
SV-PMSD8-[16,​20,​22,​25]-PC[4.01-4.2/0.01]
SV-PMSD8-LC[10-24.9/0.1]-P[1-4/0.01]
SV-PMSD8-LC[10-24.9/0.1]-PC[0.5-0.99/0.01]
SV-PMSD8-LC[10-24.9/0.1]-PC[4.01-4.2/0.01]
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSMaterial D (Shank diameter)
(mm)
L (L dimension)
(mm)
LC (Full length alteration)
(mm)
P (Tip dimension)
(mm)
PC (Tip dimension alteration)
(mm)
SLC (Full length alteration tolerance change)
(mm)
1 Piece(s) 10 Day(s) or more 10SKH51 Equivalent316 ~ 20-0.5 ~ 1--
1 Piece(s) 10 Day(s) or more 10SKH51 Equivalent316 ~ 20--1.01 ~ 1.2-
1 Piece(s) 10 Day(s) or more 10SKH51 Equivalent3-10 ~ 19.90.5 ~ 1--
1 Piece(s) 10 Day(s) or more 10SKH51 Equivalent3-10 ~ 19.9-1.01 ~ 1.2-
1 Piece(s) 10 Day(s) or more 10SKH51 Equivalent3--0.5 ~ 1-10 ~ 19.99
1 Piece(s) 10 Day(s) or more 10SKH51 Equivalent3---1.01 ~ 1.210 ~ 19.99
1 Piece(s) 16 Day(s) 10SKH51 Equivalent416 ~ 25-0.5 ~ 2--
1 Piece(s) 16 Day(s) 10SKH51 Equivalent416 ~ 25--2.01 ~ 2.2-
1 Piece(s) 16 Day(s) 10SKH51 Equivalent4-10 ~ 24.90.5 ~ 2--
1 Piece(s) 16 Day(s) 10SKH51 Equivalent4-10 ~ 24.9-2.01 ~ 2.2-
1 Piece(s) 16 Day(s) 10SKH51 Equivalent4--0.5 ~ 2-10 ~ 24.99
1 Piece(s) 16 Day(s) 10SKH51 Equivalent4---2.01 ~ 2.210 ~ 24.99
1 Piece(s) 16 Day(s) 10SKH51 Equivalent516 ~ 25-0.5 ~ 2.5--
1 Piece(s) 16 Day(s) 10SKH51 Equivalent516 ~ 25--2.51 ~ 2.7-
1 Piece(s) 16 Day(s) 10SKH51 Equivalent5-10 ~ 24.90.5 ~ 2.5--
1 Piece(s) 16 Day(s) 10SKH51 Equivalent5-10 ~ 24.9-2.51 ~ 2.7-
1 Piece(s) 16 Day(s) 10SKH51 Equivalent5--0.5 ~ 2.5-10 ~ 24.99
1 Piece(s) 16 Day(s) 10SKH51 Equivalent5---2.51 ~ 2.710 ~ 24.99
1 Piece(s) 16 Day(s) 10SKD11 Equivalent616 ~ 25-1 ~ 3--
1 Piece(s) 16 Day(s) 10SKD11 Equivalent616 ~ 25--0.5 ~ 0.99-
1 Piece(s) 16 Day(s) 10SKD11 Equivalent616 ~ 25--3.01 ~ 3.2-
1 Piece(s) 16 Day(s) 10SKD11 Equivalent6-10 ~ 24.91 ~ 3--
1 Piece(s) 16 Day(s) 10SKD11 Equivalent6-10 ~ 24.9-0.5 ~ 0.99-
1 Piece(s) 16 Day(s) 10SKD11 Equivalent6-10 ~ 24.9-3.01 ~ 3.2-
1 Piece(s) 16 Day(s) 10SKD11 Equivalent6--1 ~ 3-10 ~ 24.99
1 Piece(s) 16 Day(s) 10SKD11 Equivalent6---0.5 ~ 0.9910 ~ 24.99
1 Piece(s) 16 Day(s) 10SKD11 Equivalent6---3.01 ~ 3.210 ~ 24.99
1 Piece(s) 16 Day(s) 10SKD11 Equivalent816 ~ 25-1 ~ 4--
1 Piece(s) 16 Day(s) 10SKD11 Equivalent816 ~ 25--0.5 ~ 0.99-
1 Piece(s) 16 Day(s) 10SKD11 Equivalent816 ~ 25--4.01 ~ 4.2-
1 Piece(s) 16 Day(s) 10SKD11 Equivalent8-10 ~ 24.91 ~ 4--
1 Piece(s) 16 Day(s) 10SKD11 Equivalent8-10 ~ 24.9-0.5 ~ 0.99-
1 Piece(s) 16 Day(s) 10SKD11 Equivalent8-10 ~ 24.9-4.01 ~ 4.2-
1 Piece(s) 16 Day(s) 10SKD11 Equivalent8--1 ~ 4-10 ~ 24.99
1 Piece(s) 16 Day(s) 10SKD11 Equivalent8---0.5 ~ 0.9910 ~ 24.99
1 Piece(s) 16 Day(s) 10SKD11 Equivalent8---4.01 ~ 4.210 ~ 24.99
1 Piece(s) 16 Day(s) 10SKD11 Equivalent1016 ~ 25-2 ~ 6--
1 Piece(s) 16 Day(s) 10SKD11 Equivalent1016 ~ 25--1 ~ 1.99-
1 Piece(s) 16 Day(s) 10SKD11 Equivalent1016 ~ 25--6.01 ~ 6.2-
1 Piece(s) 16 Day(s) 10SKD11 Equivalent10-10 ~ 24.92 ~ 6--
1 Piece(s) 16 Day(s) 10SKD11 Equivalent10-10 ~ 24.9-1 ~ 1.99-
1 Piece(s) 16 Day(s) 10SKD11 Equivalent10-10 ~ 24.9-6.01 ~ 6.2-
1 Piece(s) 16 Day(s) 10SKD11 Equivalent10--2 ~ 6-10 ~ 24.99
1 Piece(s) 16 Day(s) 10SKD11 Equivalent10---1 ~ 1.9910 ~ 24.99
1 Piece(s) 16 Day(s) 10SKD11 Equivalent10---6.01 ~ 6.210 ~ 24.99
1 Piece(s) 10 Day(s) or more 10Powdered high-speed steel616 ~ 25-1 ~ 3--
1 Piece(s) 10 Day(s) or more 10Powdered high-speed steel616 ~ 25--0.5 ~ 0.99-
1 Piece(s) 10 Day(s) or more 10Powdered high-speed steel616 ~ 25--3.01 ~ 3.2-
1 Piece(s) 10 Day(s) or more 10Powdered high-speed steel6-10 ~ 24.91 ~ 3--
1 Piece(s) 10 Day(s) or more 10Powdered high-speed steel6-10 ~ 24.9-0.5 ~ 0.99-
1 Piece(s) 10 Day(s) or more 10Powdered high-speed steel6-10 ~ 24.9-3.01 ~ 3.2-
1 Piece(s) 10 Day(s) or more 10Powdered high-speed steel6--1 ~ 3-10 ~ 24.99
1 Piece(s) 10 Day(s) or more 10Powdered high-speed steel6---0.5 ~ 0.9910 ~ 24.99
1 Piece(s) 10 Day(s) or more 10Powdered high-speed steel6---3.01 ~ 3.210 ~ 24.99
1 Piece(s) 10 Day(s) or more 10Powdered high-speed steel816 ~ 25-1 ~ 4--
1 Piece(s) 10 Day(s) or more 10Powdered high-speed steel816 ~ 25--0.5 ~ 0.99-
1 Piece(s) 10 Day(s) or more 10Powdered high-speed steel816 ~ 25--4.01 ~ 4.2-
1 Piece(s) 10 Day(s) or more 10Powdered high-speed steel8-10 ~ 24.91 ~ 4--
1 Piece(s) 10 Day(s) or more 10Powdered high-speed steel8-10 ~ 24.9-0.5 ~ 0.99-
1 Piece(s) 10 Day(s) or more 10Powdered high-speed steel8-10 ~ 24.9-4.01 ~ 4.2-

Loading...

 

Basic Information

Shape Straight Tip shape A Inside shape Regular
Scrap retention None Machining to prevent scrap clogging Yes Shank diameter D tolerance n5

Tech Support

Press
Tel:021-8990-5801 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)