(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Carbide Straight Pilot Punches -Tip R Type- Normal, Lapping, TiCN Coating

Carbide Straight Pilot Punches -Tip R Type- Normal, Lapping, TiCN Coating

Click this image to zoom it.

Move the mouse over the image to zoom

carbide straight pilot punch with an R-type tip and a straight shank. The material is carbide (V30). Normal type, lap finish, and TiCN coating to improve wear resistance are available.

  • FLANGE
  • CARBIDE
  • TiCN

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
H-WSTC3-[42-62/10]-P[2-3/0.01]
H-WSTC3-LC[32-61.9/0.1]-P[2-3/0.01]
H-WSTC3-LCT[32-61.9/0.1]-P[2-3/0.01]
H-WSTC3-LMT[32-61.9/0.1]-P[2-3/0.01]
H-WSTC4-[42-72/10]-P[3-4/0.01]
H-WSTC4-LC[32-71.9/0.1]-P[3-4/0.01]
H-WSTC4-LCT[32-71.9/0.1]-P[3-4/0.01]
H-WSTC4-LMT[32-71.9/0.1]-P[3-4/0.01]
H-WSTC5-[42-72/10]-P[4-5/0.01]
H-WSTC5-LC[32-71.9/0.1]-P[4-5/0.01]
H-WSTC5-LCT[32-71.9/0.1]-P[4-5/0.01]
H-WSTC5-LMT[32-71.9/0.1]-P[4-5/0.01]
H-WSTC6-[42-72/10]-P[5-6/0.01]
H-WSTC6-LC[32-71.9/0.1]-P[5-6/0.01]
H-WSTC6-LCT[32-71.9/0.1]-P[5-6/0.01]
H-WSTC6-LMT[32-71.9/0.1]-P[5-6/0.01]
H-WSTC8-[42-72/10]-P[6-8/0.01]
H-WSTC8-LC[32-71.9/0.1]-P[6-8/0.01]
H-WSTC8-LCT[32-71.9/0.1]-P[6-8/0.01]
H-WSTC8-LMT[32-71.9/0.1]-P[6-8/0.01]
H-WSTC10-[42-72/10]-P[8-10/0.01]
H-WSTC10-LC[32-71.9/0.1]-P[8-10/0.01]
H-WSTC10-LCT[32-71.9/0.1]-P[8-10/0.01]
H-WSTC10-LMT[32-71.9/0.1]-P[8-10/0.01]
L-WSTC3-[42,​52,​62]-P[2-3/0.001]
L-WSTC3-LC[32-61.9/0.1]-P[2-3/0.001]
L-WSTC3-LCT[32-61.9/0.1]-P[2-3/0.001]
L-WSTC3-LMT[32-61.9/0.1]-P[2-3/0.001]
L-WSTC4-[42,​52,​62,​72]-P[3-4/0.001]
L-WSTC4-LC[32-71.9/0.1]-P[3-4/0.001]
L-WSTC4-LCT[32-71.9/0.1]-P[3-4/0.001]
L-WSTC4-LMT[32-71.9/0.1]-P[3-4/0.001]
L-WSTC5-[42,​52,​62,​72]-P[4-5/0.001]
L-WSTC5-LC[32-71.9/0.1]-P[4-5/0.001]
L-WSTC5-LCT[32-71.9/0.1]-P[4-5/0.001]
L-WSTC5-LMT[32-71.9/0.1]-P[4-5/0.001]
L-WSTC6-[42,​52,​62,​72]-P[5-6/0.001]
L-WSTC6-LC[32-71.9/0.1]-P[5-6/0.001]
L-WSTC6-LCT[32-71.9/0.1]-P[5-6/0.001]
L-WSTC6-LMT[32-71.9/0.1]-P[5-6/0.001]
L-WSTC8-[42,​52,​62,​72]-P[6-8/0.001]
L-WSTC8-LC[32-71.9/0.1]-P[6-8/0.001]
L-WSTC8-LCT[32-71.9/0.1]-P[6-8/0.001]
L-WSTC8-LMT[32-71.9/0.1]-P[6-8/0.001]
L-WSTC10-[42,​52,​62,​72]-P[8-10/0.001]
L-WSTC10-LC[32-71.9/0.1]-P[8-10/0.001]
L-WSTC10-LCT[32-71.9/0.1]-P[8-10/0.001]
L-WSTC10-LMT[32-71.9/0.1]-P[8-10/0.001]
WSTC3-[42-62/10]-P[2-3/0.001]
WSTC3-LC[32-61.9/0.1]-P[2-3/0.001]
WSTC3-LCT[32-61.9/0.1]-P[2-3/0.001]
WSTC3-LMT[32-61.9/0.1]-P[2-3/0.001]
WSTC4-[42-72/10]-P[3-4/0.001]
WSTC4-LC[32-71.9/0.1]-P[3-4/0.001]
WSTC4-LCT[32-71.9/0.1]-P[3-4/0.001]
WSTC4-LMT[32-71.9/0.1]-P[3-4/0.001]
WSTC5-[42-72/10]-P[4-5/0.001]
WSTC5-LC[32-71.9/0.1]-P[4-5/0.001]
WSTC5-LCT[32-71.9/0.1]-P[4-5/0.001]
WSTC5-LMT[32-71.9/0.1]-P[4-5/0.001]
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSSurface treatment No. (Nominal diameter)
(mm)
L (L dimension)
(mm)
LC (Full length alteration)
(mm)
LCT (Head thickness tolerance change + Total length alteration)
(mm)
LMT (Head thickness tolerance change + Total length alteration)
(mm)
P (Tip dimension)
(mm)
1 Piece(s) 12 Day(s) or more 10TiCN342 ~ 62---2 ~ 3
1 Piece(s) 12 Day(s) or more 10TiCN3-32 ~ 61.9--2 ~ 3
1 Piece(s) 12 Day(s) or more 10TiCN3--32 ~ 61.9-2 ~ 3
1 Piece(s) 12 Day(s) or more 10TiCN3---32 ~ 61.92 ~ 3
1 Piece(s) 12 Day(s) or more 10TiCN442 ~ 72---3 ~ 4
1 Piece(s) 12 Day(s) or more 10TiCN4-32 ~ 71.9--3 ~ 4
1 Piece(s) 12 Day(s) or more 10TiCN4--32 ~ 71.9-3 ~ 4
1 Piece(s) 12 Day(s) or more 10TiCN4---32 ~ 71.93 ~ 4
1 Piece(s) 12 Day(s) or more 10TiCN542 ~ 72---4 ~ 5
1 Piece(s) 12 Day(s) or more 10TiCN5-32 ~ 71.9--4 ~ 5
1 Piece(s) 12 Day(s) or more 10TiCN5--32 ~ 71.9-4 ~ 5
1 Piece(s) 12 Day(s) or more 10TiCN5---32 ~ 71.94 ~ 5
1 Piece(s) 12 Day(s) or more 10TiCN642 ~ 72---5 ~ 6
1 Piece(s) 12 Day(s) or more 10TiCN6-32 ~ 71.9--5 ~ 6
1 Piece(s) 12 Day(s) or more 10TiCN6--32 ~ 71.9-5 ~ 6
1 Piece(s) 12 Day(s) or more 10TiCN6---32 ~ 71.95 ~ 6
1 Piece(s) 12 Day(s) or more 10TiCN842 ~ 72---6 ~ 8
1 Piece(s) 12 Day(s) or more 10TiCN8-32 ~ 71.9--6 ~ 8
1 Piece(s) 12 Day(s) or more 10TiCN8--32 ~ 71.9-6 ~ 8
1 Piece(s) 12 Day(s) or more 10TiCN8---32 ~ 71.96 ~ 8
1 Piece(s) 12 Day(s) or more 10TiCN1042 ~ 72---8 ~ 10
1 Piece(s) 12 Day(s) or more 10TiCN10-32 ~ 71.9--8 ~ 10
1 Piece(s) 12 Day(s) or more 10TiCN10--32 ~ 71.9-8 ~ 10
1 Piece(s) 12 Day(s) or more 10TiCN10---32 ~ 71.98 ~ 10
1 Piece(s) 9 Day(s) or more 10Lapping342 ~ 62---2 ~ 3
1 Piece(s) 9 Day(s) or more 10Lapping3-32 ~ 61.9--2 ~ 3
1 Piece(s) 9 Day(s) or more 10Lapping3--32 ~ 61.9-2 ~ 3
1 Piece(s) 9 Day(s) or more 10Lapping3---32 ~ 61.92 ~ 3
1 Piece(s) 9 Day(s) or more 10Lapping442 ~ 72---3 ~ 4
1 Piece(s) 9 Day(s) or more 10Lapping4-32 ~ 71.9--3 ~ 4
1 Piece(s) 9 Day(s) or more 10Lapping4--32 ~ 71.9-3 ~ 4
1 Piece(s) 9 Day(s) or more 10Lapping4---32 ~ 71.93 ~ 4
1 Piece(s) 9 Day(s) or more 10Lapping542 ~ 72---4 ~ 5
1 Piece(s) 9 Day(s) or more 10Lapping5-32 ~ 71.9--4 ~ 5
1 Piece(s) 9 Day(s) or more 10Lapping5--32 ~ 71.9-4 ~ 5
1 Piece(s) 9 Day(s) or more 10Lapping5---32 ~ 71.94 ~ 5
1 Piece(s) 9 Day(s) or more 10Lapping642 ~ 72---5 ~ 6
1 Piece(s) 9 Day(s) or more 10Lapping6-32 ~ 71.9--5 ~ 6
1 Piece(s) 9 Day(s) or more 10Lapping6--32 ~ 71.9-5 ~ 6
1 Piece(s) 9 Day(s) or more 10Lapping6---32 ~ 71.95 ~ 6
1 Piece(s) 9 Day(s) or more 10Lapping842 ~ 72---6 ~ 8
1 Piece(s) 9 Day(s) or more 10Lapping8-32 ~ 71.9--6 ~ 8
1 Piece(s) 9 Day(s) or more 10Lapping8--32 ~ 71.9-6 ~ 8
1 Piece(s) 9 Day(s) or more 10Lapping8---32 ~ 71.96 ~ 8
1 Piece(s) 9 Day(s) or more 10Lapping1042 ~ 72---8 ~ 10
1 Piece(s) 9 Day(s) or more 10Lapping10-32 ~ 71.9--8 ~ 10
1 Piece(s) 9 Day(s) or more 10Lapping10--32 ~ 71.9-8 ~ 10
1 Piece(s) 9 Day(s) or more 10Lapping10---32 ~ 71.98 ~ 10
1 Piece(s) 9 Day(s) or more 10None342 ~ 62---2 ~ 3
1 Piece(s) 9 Day(s) or more 10None3-32 ~ 61.9--2 ~ 3
1 Piece(s) 9 Day(s) or more 10None3--32 ~ 61.9-2 ~ 3
1 Piece(s) 9 Day(s) or more 10None3---32 ~ 61.92 ~ 3
1 Piece(s) 9 Day(s) or more 10None442 ~ 72---3 ~ 4
1 Piece(s) 9 Day(s) or more 10None4-32 ~ 71.9--3 ~ 4
1 Piece(s) 9 Day(s) or more 10None4--32 ~ 71.9-3 ~ 4
1 Piece(s) 9 Day(s) or more 10None4---32 ~ 71.93 ~ 4
1 Piece(s) 9 Day(s) or more 10None542 ~ 72---4 ~ 5
1 Piece(s) 9 Day(s) or more 10None5-32 ~ 71.9--4 ~ 5
1 Piece(s) 9 Day(s) or more 10None5--32 ~ 71.9-4 ~ 5
1 Piece(s) 9 Day(s) or more 10None5---32 ~ 71.94 ~ 5

Loading...

 

Basic Information

Shank type Straight Tip shape Tip R Material Carbide V30 (HIP)
Mounting plate Punch plate Shank (mounting part) shape Standard

Tech Support

Press
Tel:021-8990-5801 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)