(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Precison Gas Release Straight Core Pins -Shaft Diameter (D) Selection Type_Shaft Diameter (P) Designation (0.005mm Increments) Type-

Precison Gas Release Straight Core Pins -Shaft Diameter (D) Selection Type_Shaft Diameter (P) Designation (0.005mm Increments) Type-

Click this image to zoom it.

Move the mouse over the image to zoom

Precision gas venting straight core pin with fixed shaft diameter (D) and specified shaft diameter (P) of 0.005mm.

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
GV-CPV-L0.5-[15-100/0.01]-DC[0.42-0.5/0.005]-N[0.3-10/0.1]-SV[2-50/0.5]
GV-CPV-L0.5-[15-100/0.01]-DC[0.42-0.5/0.005]-N[0.3-10/0.1]-SVC
GV-CPV-L0.5-[15-100/0.01]-DCX-N[0.3-10/0.1]-SV[2-50/0.5]
GV-CPV-L0.5-[15-100/0.01]-DCX-N[0.3-10/0.1]-SVC
GV-CPV-L0.6-[15-100/0.01]-DC[0.52-0.6/0.005]-N[0.3-10/0.1]-SV[2-50/0.5]
GV-CPV-L0.6-[15-100/0.01]-DC[0.52-0.6/0.005]-N[0.3-10/0.1]-SVC
GV-CPV-L0.6-[15-100/0.01]-DCX-N[0.3-10/0.1]-SV[2-50/0.5]
GV-CPV-L0.6-[15-100/0.01]-DCX-N[0.3-10/0.1]-SVC
GV-CPV-L0.7-[15-100/0.01]-DC[0.62-0.7/0.005]-N[0.3-10/0.1]-SV[2-50/0.5]
GV-CPV-L0.7-[15-100/0.01]-DC[0.62-0.7/0.005]-N[0.3-10/0.1]-SVC
GV-CPV-L0.7-[15-100/0.01]-DCX-N[0.3-10/0.1]-SV[2-50/0.5]
GV-CPV-L0.7-[15-100/0.01]-DCX-N[0.3-10/0.1]-SVC
GV-CPV-L0.8-[15-100/0.01]-DC[0.72-0.8/0.005]-N[0.3-10/0.1]-SV[2-50/0.5]
GV-CPV-L0.8-[15-100/0.01]-DC[0.72-0.8/0.005]-N[0.3-10/0.1]-SVC
GV-CPV-L0.8-[15-100/0.01]-DCX-N[0.3-10/0.1]-SV[2-50/0.5]
GV-CPV-L0.8-[15-100/0.01]-DCX-N[0.3-10/0.1]-SVC
GV-CPV-L0.9-[15-100/0.01]-DC[0.82-0.9/0.005]-N[0.3-10/0.1]-SV[2-50/0.5]
GV-CPV-L0.9-[15-100/0.01]-DC[0.82-0.9/0.005]-N[0.3-10/0.1]-SVC
GV-CPV-L0.9-[15-100/0.01]-DCX-N[0.3-10/0.1]-SV[2-50/0.5]
GV-CPV-L0.9-[15-100/0.01]-DCX-N[0.3-10/0.1]-SVC
GV-CPV-L1-[15-100/0.01]-DC[0.92-1/0.005]-N[0.3-10/0.1]-SV[2-50/0.5]
GV-CPV-L1-[15-100/0.01]-DC[0.92-1/0.005]-N[0.3-10/0.1]-SVC
GV-CPV-L1-[15-100/0.01]-DCX-N[0.3-10/0.1]-SV[2-50/0.5]
GV-CPV-L1-[15-100/0.01]-DCX-N[0.3-10/0.1]-SVC
GV-CPV-L1.2-[15-100/0.01]-DC[1.12-1.2/0.005]-N[0.3-10/0.1]-SV[2-50/0.5]
GV-CPV-L1.2-[15-100/0.01]-DC[1.12-1.2/0.005]-N[0.3-10/0.1]-SVC
GV-CPV-L1.2-[15-100/0.01]-DCX-N[0.3-10/0.1]-SV[2-50/0.5]
GV-CPV-L1.2-[15-100/0.01]-DCX-N[0.3-10/0.1]-SVC
GV-CPV-L1.5-[15-100/0.01]-DC[1.42-1.5/0.005]-N[0.3-10/0.1]-SV[2-50/0.5]
GV-CPV-L1.5-[15-100/0.01]-DC[1.42-1.5/0.005]-N[0.3-10/0.1]-SVC
GV-CPV-L1.5-[15-100/0.01]-DCX-N[0.3-10/0.1]-SV[2-50/0.5]
GV-CPV-L1.5-[15-100/0.01]-DCX-N[0.3-10/0.1]-SVC
GV-CPV-L2-[15-100/0.01]-DC[1.92-2/0.005]-N[0.3-10/0.1]-SV[2-50/0.5]
GV-CPV-L2-[15-100/0.01]-DC[1.92-2/0.005]-N[0.3-10/0.1]-SVC
GV-CPV-L2-[15-100/0.01]-DCX-N[0.3-10/0.1]-SV[2-50/0.5]
GV-CPV-L2-[15-100/0.01]-DCX-N[0.3-10/0.1]-SVC
GV-CPV-L2.5-[15-100/0.01]-DC[2.42-2.5/0.005]-N[0.3-10/0.1]-SV[2-50/0.5]
GV-CPV-L2.5-[15-100/0.01]-DC[2.42-2.5/0.005]-N[0.3-10/0.1]-SVC
GV-CPV-L2.5-[15-100/0.01]-DCX-N[0.3-10/0.1]-SV[2-50/0.5]
GV-CPV-L2.5-[15-100/0.01]-DCX-N[0.3-10/0.1]-SVC
GV-CPV-L3-[15-100/0.01]-DC[2.92-3/0.005]-N[0.3-10/0.1]-SV[2-50/0.5]
GV-CPV-L3-[15-100/0.01]-DC[2.92-3/0.005]-N[0.3-10/0.1]-SVC
GV-CPV-L3-[15-100/0.01]-DCX-N[0.3-10/0.1]-SV[2-50/0.5]
GV-CPV-L3-[15-100/0.01]-DCX-N[0.3-10/0.1]-SVC
GV-CPV-L3.5-[15-120/0.01]-DC[3.42-3.5/0.005]-N[0.5-15/0.1]-SV[2-60/0.5]
GV-CPV-L3.5-[15-120/0.01]-DC[3.42-3.5/0.005]-N[0.5-15/0.1]-SVC
GV-CPV-L3.5-[15-120/0.01]-DCX-N[0.5-15/0.1]-SV[2-60/0.5]
GV-CPV-L3.5-[15-120/0.01]-DCX-N[0.5-15/0.1]-SVC
GV-CPV-L4-[15-120/0.01]-DC[3.92-4/0.005]-N[0.5-15/0.1]-SV[2-60/0.5]
GV-CPV-L4-[15-120/0.01]-DC[3.92-4/0.005]-N[0.5-15/0.1]-SVC
GV-CPV-L4-[15-120/0.01]-DCX-N[0.5-15/0.1]-SV[2-60/0.5]
GV-CPV-L4-[15-120/0.01]-DCX-N[0.5-15/0.1]-SVC
GV-CPV-L4.5-[15-120/0.01]-DC[4.42-4.5/0.005]-N[0.5-15/0.1]-SV[2-60/0.5]
GV-CPV-L4.5-[15-120/0.01]-DC[4.42-4.5/0.005]-N[0.5-15/0.1]-SVC
GV-CPV-L4.5-[15-120/0.01]-DCX-N[0.5-15/0.1]-SV[2-60/0.5]
GV-CPV-L4.5-[15-120/0.01]-DCX-N[0.5-15/0.1]-SVC
GV-CPV-L5-[15-120/0.01]-DC[4.92-5/0.005]-N[0.5-15/0.1]-SV[2-60/0.5]
GV-CPV-L5-[15-120/0.01]-DC[4.92-5/0.005]-N[0.5-15/0.1]-SVC
GV-CPV-L5-[15-120/0.01]-DCX-N[0.5-15/0.1]-SV[2-60/0.5]
GV-CPV-L5-[15-120/0.01]-DCX-N[0.5-15/0.1]-SVC
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSMaterial D/P (Shaft diameter)
(mm)
No. (Nominal diameter)
(mm)
L (L dimension)
(mm)
DC (Gas release section diameter)
(mm)
Extend the flat section SV to the bottom N (Tip diameter length)
(mm)
PC (Gas release section diameter)
(mm)
SV (Gas release facet cutting length)
(mm)
When DC = D, DCX is applied When PC=P, PCX is applied
1 Piece(s) 10 Day(s) or more 10SKH510.5-15 ~ 1000.42 ~ 0.5-0.3 ~ 10-2 ~ 50--
1 Piece(s) 10 Day(s) or more 10SKH510.5-15 ~ 1000.42 ~ 0.5SVC0.3 ~ 10----
1 Piece(s) 10 Day(s) or more 10SKH510.5-15 ~ 100--0.3 ~ 10-2 ~ 50DCX-
1 Piece(s) 10 Day(s) or more 10SKH510.5-15 ~ 100-SVC0.3 ~ 10--DCX-
1 Piece(s) 10 Day(s) or more 10SKH510.6-15 ~ 1000.52 ~ 0.6-0.3 ~ 10-2 ~ 50--
1 Piece(s) 10 Day(s) or more 10SKH510.6-15 ~ 1000.52 ~ 0.6SVC0.3 ~ 10----
1 Piece(s) 10 Day(s) or more 10SKH510.6-15 ~ 100--0.3 ~ 10-2 ~ 50DCX-
1 Piece(s) 10 Day(s) or more 10SKH510.6-15 ~ 100-SVC0.3 ~ 10--DCX-
1 Piece(s) 10 Day(s) or more 10SKH510.7-15 ~ 1000.62 ~ 0.7-0.3 ~ 10-2 ~ 50--
1 Piece(s) 10 Day(s) or more 10SKH510.7-15 ~ 1000.62 ~ 0.7SVC0.3 ~ 10----
1 Piece(s) 10 Day(s) or more 10SKH510.7-15 ~ 100--0.3 ~ 10-2 ~ 50DCX-
1 Piece(s) 10 Day(s) or more 10SKH510.7-15 ~ 100-SVC0.3 ~ 10--DCX-
1 Piece(s) 10 Day(s) or more 10SKH510.8-15 ~ 1000.72 ~ 0.8-0.3 ~ 10-2 ~ 50--
1 Piece(s) 10 Day(s) or more 10SKH510.8-15 ~ 1000.72 ~ 0.8SVC0.3 ~ 10----
1 Piece(s) 10 Day(s) or more 10SKH510.8-15 ~ 100--0.3 ~ 10-2 ~ 50DCX-
1 Piece(s) 10 Day(s) or more 10SKH510.8-15 ~ 100-SVC0.3 ~ 10--DCX-
1 Piece(s) 10 Day(s) or more 10SKH510.9-15 ~ 1000.82 ~ 0.9-0.3 ~ 10-2 ~ 50--
1 Piece(s) 10 Day(s) or more 10SKH510.9-15 ~ 1000.82 ~ 0.9SVC0.3 ~ 10----
1 Piece(s) 10 Day(s) or more 10SKH510.9-15 ~ 100--0.3 ~ 10-2 ~ 50DCX-
1 Piece(s) 10 Day(s) or more 10SKH510.9-15 ~ 100-SVC0.3 ~ 10--DCX-
1 Piece(s) 10 Day(s) or more 10SKH511-15 ~ 1000.92 ~ 1-0.3 ~ 10-2 ~ 50--
1 Piece(s) 10 Day(s) or more 10SKH511-15 ~ 1000.92 ~ 1SVC0.3 ~ 10----
1 Piece(s) 10 Day(s) or more 10SKH511-15 ~ 100--0.3 ~ 10-2 ~ 50DCX-
1 Piece(s) 10 Day(s) or more 10SKH511-15 ~ 100-SVC0.3 ~ 10--DCX-
1 Piece(s) 10 Day(s) or more 10SKH511.2-15 ~ 1001.12 ~ 1.2-0.3 ~ 10-2 ~ 50--
1 Piece(s) 10 Day(s) or more 10SKH511.2-15 ~ 1001.12 ~ 1.2SVC0.3 ~ 10----
1 Piece(s) 10 Day(s) or more 10SKH511.2-15 ~ 100--0.3 ~ 10-2 ~ 50DCX-
1 Piece(s) 10 Day(s) or more 10SKH511.2-15 ~ 100-SVC0.3 ~ 10--DCX-
1 Piece(s) 10 Day(s) or more 10SKH511.5-15 ~ 1001.42 ~ 1.5-0.3 ~ 10-2 ~ 50--
1 Piece(s) 10 Day(s) or more 10SKH511.5-15 ~ 1001.42 ~ 1.5SVC0.3 ~ 10----
1 Piece(s) 10 Day(s) or more 10SKH511.5-15 ~ 100--0.3 ~ 10-2 ~ 50DCX-
1 Piece(s) 10 Day(s) or more 10SKH511.5-15 ~ 100-SVC0.3 ~ 10--DCX-
1 Piece(s) 10 Day(s) or more 10SKH512-15 ~ 1001.92 ~ 2-0.3 ~ 10-2 ~ 50--
1 Piece(s) 10 Day(s) or more 10SKH512-15 ~ 1001.92 ~ 2SVC0.3 ~ 10----
1 Piece(s) 10 Day(s) or more 10SKH512-15 ~ 100--0.3 ~ 10-2 ~ 50DCX-
1 Piece(s) 10 Day(s) or more 10SKH512-15 ~ 100-SVC0.3 ~ 10--DCX-
1 Piece(s) 10 Day(s) or more 10SKH512.5-15 ~ 1002.42 ~ 2.5-0.3 ~ 10-2 ~ 50--
1 Piece(s) 10 Day(s) or more 10SKH512.5-15 ~ 1002.42 ~ 2.5SVC0.3 ~ 10----
1 Piece(s) 10 Day(s) or more 10SKH512.5-15 ~ 100--0.3 ~ 10-2 ~ 50DCX-
1 Piece(s) 10 Day(s) or more 10SKH512.5-15 ~ 100-SVC0.3 ~ 10--DCX-
1 Piece(s) 10 Day(s) or more 10SKH513-15 ~ 1002.92 ~ 3-0.3 ~ 10-2 ~ 50--
1 Piece(s) 10 Day(s) or more 10SKH513-15 ~ 1002.92 ~ 3SVC0.3 ~ 10----
1 Piece(s) 10 Day(s) or more 10SKH513-15 ~ 100--0.3 ~ 10-2 ~ 50DCX-
1 Piece(s) 10 Day(s) or more 10SKH513-15 ~ 100-SVC0.3 ~ 10--DCX-
1 Piece(s) 10 Day(s) or more 10SKH513.5-15 ~ 1203.42 ~ 3.5-0.5 ~ 15-2 ~ 60--
1 Piece(s) 10 Day(s) or more 10SKH513.5-15 ~ 1203.42 ~ 3.5SVC0.5 ~ 15----
1 Piece(s) 10 Day(s) or more 10SKH513.5-15 ~ 120--0.5 ~ 15-2 ~ 60DCX-
1 Piece(s) 10 Day(s) or more 10SKH513.5-15 ~ 120-SVC0.5 ~ 15--DCX-
1 Piece(s) 10 Day(s) or more 10SKH514-15 ~ 1203.92 ~ 4-0.5 ~ 15-2 ~ 60--
1 Piece(s) 10 Day(s) or more 10SKH514-15 ~ 1203.92 ~ 4SVC0.5 ~ 15----
1 Piece(s) 10 Day(s) or more 10SKH514-15 ~ 120--0.5 ~ 15-2 ~ 60DCX-
1 Piece(s) 10 Day(s) or more 10SKH514-15 ~ 120-SVC0.5 ~ 15--DCX-
1 Piece(s) 10 Day(s) or more 10SKH514.5-15 ~ 1204.42 ~ 4.5-0.5 ~ 15-2 ~ 60--
1 Piece(s) 10 Day(s) or more 10SKH514.5-15 ~ 1204.42 ~ 4.5SVC0.5 ~ 15----
1 Piece(s) 10 Day(s) or more 10SKH514.5-15 ~ 120--0.5 ~ 15-2 ~ 60DCX-
1 Piece(s) 10 Day(s) or more 10SKH514.5-15 ~ 120-SVC0.5 ~ 15--DCX-
1 Piece(s) 10 Day(s) or more 10SKH515-15 ~ 1204.92 ~ 5-0.5 ~ 15-2 ~ 60--
1 Piece(s) 10 Day(s) or more 10SKH515-15 ~ 1204.92 ~ 5SVC0.5 ~ 15----
1 Piece(s) 10 Day(s) or more 10SKH515-15 ~ 120--0.5 ~ 15-2 ~ 60DCX-
1 Piece(s) 10 Day(s) or more 10SKH515-15 ~ 120-SVC0.5 ~ 15--DCX-

Loading...

 

Basic Information

Shape type Gas release Quenching Hardening steel Shaft diameter tolerance 0/-0.005
L dimension tolerance +0.01/0 Head thickness 4mm(T4) Tip shape No
Gas release shape With gas vent Character engraving type No Number of engraving characters No

Tech Support

Mold
Tel:021-8990-5801 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)