(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Taperless One-Step Core Pins -Shaft Diameter (D) Selection/Shaft Diameter Tolerance 0_-0.005/A Tolerance 0_-0.01 Type-

Taperless One-Step Core Pins -Shaft Diameter (D) Selection/Shaft Diameter Tolerance 0_-0.005/A Tolerance 0_-0.01 Type-

Click this image to zoom it.

Move the mouse over the image to zoom

Taperless 1-stage core pin (no draft) with fixed shaft diameter (D).

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
CPHS-BB1-[12-100/0.01]-F[10-99.4/0.01]-A[0.5-0.99/0.01]
CPHS-BB1-[12-100/0.01]-F[10-99.4/0.01]-AAC[0.4-0.49/0.01]
CPHS-BB1.5-[12-100/0.01]-F[10-99.4/0.01]-A[0.5-1.49/0.01]
CPHS-BB1.5-[12-100/0.01]-F[10-99.4/0.01]-AAC[0.4-0.49/0.01]
CPHS-BB2-[12-100/0.01]-F[10-99.4/0.01]-A[0.5-1.99/0.01]
CPHS-BB2.5-[12-100/0.01]-F[10-99.4/0.01]-A[0.5-2.49/0.01]
CPHS-BB3-[12-100/0.01]-F[10-99.4/0.01]-A[0.7-2.99/0.01]
CPHS-BB3.5-[12-120/0.01]-F[10-119.4/0.01]-A[1-3.49/0.01]
CPHS-BB3.5-[12-120/0.01]-F[10-119.4/0.01]-AAC[0.7-0.99/0.01]
CPHS-BB4-[12-120/0.01]-F[10-119.4/0.01]-A[1-3.99/0.01]
CPHS-BB4-[12-120/0.01]-F[10-119.4/0.01]-AAC[0.7-0.99/0.01]
CPHS-BB4.5-[12-120/0.01]-F[10-119.4/0.01]-A[1-4.49/0.01]
CPHS-BB5-[12-150/0.01]-F[10-150/0.01]-A[1-4.99/0.01]
CPHS-BB5.5-[12-150/0.01]-F[10-150/0.01]-A[1.5-5.49/0.01]
CPHS-BB5.5-[12-150/0.01]-F[10-150/0.01]-AAC[1-1.49/0.01]
CPHS-BB6-[12-150/0.01]-F[10-150/0.01]-A[2-5.99/0.01]
CPHS-BB6-[12-150/0.01]-F[10-150/0.01]-AAC[1.5-1.99/0.01]
CPHS-BB6.5-[12-150/0.01]-F[10-150/0.01]-A[2-6.49/0.01]
CPHS-BB6.5-[12-150/0.01]-F[10-150/0.01]-AAC[1.5-1.99/0.01]
CPHS-BB7-[12-150/0.01]-F[10-150/0.01]-A[2-6.99/0.01]
CPHS-BB7-[12-150/0.01]-F[10-150/0.01]-AAC[1.5-1.99/0.01]
CPHS-BB8-[12-150/0.01]-F[10-150/0.01]-A[2-7.99/0.01]
CPHS-BB8-[12-150/0.01]-F[10-150/0.01]-AAC[1.5-1.99/0.01]
CPHS-BB10-[12-150/0.01]-F[10-150/0.01]-A[2-9.99/0.01]
CPHS-BB10-[12-150/0.01]-F[10-150/0.01]-AAC[1.5-1.99/0.01]
CPHS-BB13-[12-150/0.01]-F[10-150/0.01]-A[2-12.99/0.01]
CPHS-BB13-[12-150/0.01]-F[10-150/0.01]-AAC[1.5-1.99/0.01]
CPHS-BB16-[12-150/0.01]-F[10-150/0.01]-A[2-15.99/0.01]
CPHS-BB16-[12-150/0.01]-F[10-150/0.01]-AAC[1.5-1.99/0.01]
CPHS-BB20-[30-150/0.01]-F[28-150/0.01]-A[5-19.99/0.01]
CPHS-BB20-[30-150/0.01]-F[28-150/0.01]-AAC[4-4.99/0.01]
CPHS-BC1-[12-100/0.01]-F[10-99.4/0.01]-A[0.5-0.99/0.01]-G[0.1-0.4/0.1]
CPHS-BC1-[12-100/0.01]-F[10-99.4/0.01]-AAC[0.4-0.49/0.01]-G[0.1-0.4/0.1]
CPHS-BC1.5-[12-100/0.01]-F[10-99.4/0.01]-A[0.5-1.49/0.01]-G[0.1-0.7/0.1]
CPHS-BC1.5-[12-100/0.01]-F[10-99.4/0.01]-AAC[0.4-0.49/0.01]-G[0.1-0.7/0.1]
CPHS-BC2-[12-100/0.01]-F[10-99.4/0.01]-A[0.5-1.99/0.01]-G[0.1-0.9/0.1]
CPHS-BC2.5-[12-100/0.01]-F[10-99.4/0.01]-A[0.5-2.49/0.01]-G[0.1-1.2/0.1]
CPHS-BC3-[12-100/0.01]-F[10-99.4/0.01]-A[0.7-2.99/0.01]-G[0.1-1.4/0.1]
CPHS-BC3.5-[12-120/0.01]-F[10-119.4/0.01]-A[1-3.49/0.01]-G[0.1-1.7/0.1]
CPHS-BC3.5-[12-120/0.01]-F[10-119.4/0.01]-AAC[0.7-0.99/0.01]-G[0.1-1.7/0.1]
CPHS-BC4-[12-120/0.01]-F[10-119.4/0.01]-A[1-3.99/0.01]-G[0.1-1.9/0.1]
CPHS-BC4-[12-120/0.01]-F[10-119.4/0.01]-AAC[0.7-0.99/0.01]-G[0.1-1.9/0.1]
CPHS-BC4.5-[12-120/0.01]-F[10-119.4/0.01]-A[1-4.49/0.01]-G[0.1-2.2/0.1]
CPHS-BC5-[12-150/0.01]-F[10-150/0.01]-A[1-4.99/0.01]-G[0.1-2.4/0.1]
CPHS-BC5.5-[12-150/0.01]-F[10-150/0.01]-A[1.5-5.49/0.01]-G[0.1-2.7/0.1]
CPHS-BC5.5-[12-150/0.01]-F[10-150/0.01]-AAC[1-1.49/0.01]-G[0.1-2.7/0.1]
CPHS-BC6-[12-150/0.01]-F[10-150/0.01]-A[2-5.99/0.01]-G[0.1-2.9/0.1]
CPHS-BC6-[12-150/0.01]-F[10-150/0.01]-AAC[1.5-1.99/0.01]-G[0.1-2.9/0.1]
CPHS-BC6.5-[12-150/0.01]-F[10-150/0.01]-A[2-6.49/0.01]-G[0.1-3.2/0.1]
CPHS-BC6.5-[12-150/0.01]-F[10-150/0.01]-AAC[1.5-1.99/0.01]-G[0.1-3.2/0.1]
CPHS-BC7-[12-150/0.01]-F[10-150/0.01]-A[2-6.99/0.01]-G[0.1-3.4/0.1]
CPHS-BC7-[12-150/0.01]-F[10-150/0.01]-AAC[1.5-1.99/0.01]-G[0.1-3.4/0.1]
CPHS-BC8-[12-150/0.01]-F[10-150/0.01]-A[2-7.99/0.01]-G[0.1-3.9/0.1]
CPHS-BC8-[12-150/0.01]-F[10-150/0.01]-AAC[1.5-1.99/0.01]-G[0.1-3.9/0.1]
CPHS-BC10-[12-150/0.01]-F[10-150/0.01]-A[2-9.99/0.01]-G[0.1-4.9/0.1]
CPHS-BC10-[12-150/0.01]-F[10-150/0.01]-AAC[1.5-1.99/0.01]-G[0.1-4.9/0.1]
CPHS-BC13-[12-150/0.01]-F[10-150/0.01]-A[2-12.99/0.01]-G[0.1-6.4/0.1]
CPHS-BC13-[12-150/0.01]-F[10-150/0.01]-AAC[1.5-1.99/0.01]-G[0.1-6.4/0.1]
CPHS-BC16-[12-150/0.01]-F[10-150/0.01]-A[2-15.99/0.01]-G[0.1-7.9/0.1]
CPHS-BC16-[12-150/0.01]-F[10-150/0.01]-AAC[1.5-1.99/0.01]-G[0.1-7.9/0.1]
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSMaterial L dimension tolerance A/AAC (Tip diameter)
(mm)
D/P (Shaft diameter)
(mm)
Type of the first step Step1 Tip shape Shape RE (R shape alteration・enlargement)
(mm)
C (Step type taper width)
(mm)
CVC (C dimension can be designated at 0.01mm increments)
(mm)
F (Bearing bore length)
(mm)
G (Tip C chamfering width)
(mm)
K (Tip angle)
(°)
L (L dimension)
(mm)
Q (Tip R chamfering)
(mm)
R (Step type R)
(mm)
S (Tip tapered width)
(mm)
1 Piece(s) 9 Day(s) or more 10SKH510/-0.050.5 ~ 0.991BB---10 ~ 99.4--12 ~ 100---
1 Piece(s) 9 Day(s) or more 10SKH510/-0.050.4 ~ 0.491BB---10 ~ 99.4--12 ~ 100---
1 Piece(s) 9 Day(s) or more 10SKH510/-0.050.5 ~ 1.491.5BB---10 ~ 99.4--12 ~ 100---
1 Piece(s) 9 Day(s) or more 10SKH510/-0.050.4 ~ 0.491.5BB---10 ~ 99.4--12 ~ 100---
1 Piece(s) 9 Day(s) or more 10SKH510/-0.050.5 ~ 1.992BB---10 ~ 99.4--12 ~ 100---
1 Piece(s) 9 Day(s) or more 10SKH510/-0.050.5 ~ 2.492.5BB---10 ~ 99.4--12 ~ 100---
1 Piece(s) 9 Day(s) or more 10SKH510/-0.050.7 ~ 2.993BB---10 ~ 99.4--12 ~ 100---
1 Piece(s) 9 Day(s) or more 10SKH510/-0.051 ~ 3.493.5BB---10 ~ 119.4--12 ~ 120---
1 Piece(s) 9 Day(s) or more 10SKH510/-0.050.7 ~ 0.993.5BB---10 ~ 119.4--12 ~ 120---
1 Piece(s) 9 Day(s) or more 10SKH510/-0.051 ~ 3.994BB---10 ~ 119.4--12 ~ 120---
1 Piece(s) 9 Day(s) or more 10SKH510/-0.050.7 ~ 0.994BB---10 ~ 119.4--12 ~ 120---
1 Piece(s) 9 Day(s) or more 10SKH510/-0.051 ~ 4.494.5BB---10 ~ 119.4--12 ~ 120---
1 Piece(s) 9 Day(s) or more 10SKH510/-0.051 ~ 4.995BB---10 ~ 150--12 ~ 150---
1 Piece(s) 9 Day(s) or more 10SKH510/-0.051.5 ~ 5.495.5BB---10 ~ 150--12 ~ 150---
1 Piece(s) 9 Day(s) or more 10SKH510/-0.051 ~ 1.495.5BB---10 ~ 150--12 ~ 150---
1 Piece(s) 9 Day(s) or more 10SKH510/-0.052 ~ 5.996BB---10 ~ 150--12 ~ 150---
1 Piece(s) 9 Day(s) or more 10SKH510/-0.051.5 ~ 1.996BB---10 ~ 150--12 ~ 150---
1 Piece(s) 9 Day(s) or more 10SKH510/-0.052 ~ 6.496.5BB---10 ~ 150--12 ~ 150---
1 Piece(s) 9 Day(s) or more 10SKH510/-0.051.5 ~ 1.996.5BB---10 ~ 150--12 ~ 150---
1 Piece(s) 9 Day(s) or more 10SKH510/-0.052 ~ 6.997BB---10 ~ 150--12 ~ 150---
1 Piece(s) 9 Day(s) or more 10SKH510/-0.051.5 ~ 1.997BB---10 ~ 150--12 ~ 150---
1 Piece(s) 9 Day(s) or more 10SKH510/-0.052 ~ 7.998BB---10 ~ 150--12 ~ 150---
1 Piece(s) 9 Day(s) or more 10SKH510/-0.051.5 ~ 1.998BB---10 ~ 150--12 ~ 150---
1 Piece(s) 9 Day(s) or more 10SKH510/-0.052 ~ 9.9910BB---10 ~ 150--12 ~ 150---
1 Piece(s) 9 Day(s) or more 10SKH510/-0.051.5 ~ 1.9910BB---10 ~ 150--12 ~ 150---
1 Piece(s) 10 Day(s) or more 10SKH510/-0.052 ~ 12.9913BB---10 ~ 150--12 ~ 150---
1 Piece(s) 10 Day(s) or more 10SKH510/-0.051.5 ~ 1.9913BB---10 ~ 150--12 ~ 150---
1 Piece(s) 10 Day(s) or more 10SKH510/-0.052 ~ 15.9916BB---10 ~ 150--12 ~ 150---
1 Piece(s) 10 Day(s) or more 10SKH510/-0.051.5 ~ 1.9916BB---10 ~ 150--12 ~ 150---
1 Piece(s) 10 Day(s) or more 10SKH510/-0.055 ~ 19.9920BB---28 ~ 150--30 ~ 150---
1 Piece(s) 10 Day(s) or more 10SKH510/-0.054 ~ 4.9920BB---28 ~ 150--30 ~ 150---
1 Piece(s) 9 Day(s) or more 10SKH51+0.02/00.5 ~ 0.991BC---10 ~ 99.40.1 ~ 0.4-12 ~ 100---
1 Piece(s) 9 Day(s) or more 10SKH51+0.02/00.4 ~ 0.491BC---10 ~ 99.40.1 ~ 0.4-12 ~ 100---
1 Piece(s) 9 Day(s) or more 10SKH51+0.02/00.5 ~ 1.491.5BC---10 ~ 99.40.1 ~ 0.7-12 ~ 100---
1 Piece(s) 9 Day(s) or more 10SKH51+0.02/00.4 ~ 0.491.5BC---10 ~ 99.40.1 ~ 0.7-12 ~ 100---
1 Piece(s) 9 Day(s) or more 10SKH51+0.02/00.5 ~ 1.992BC---10 ~ 99.40.1 ~ 0.9-12 ~ 100---
1 Piece(s) 9 Day(s) or more 10SKH51+0.02/00.5 ~ 2.492.5BC---10 ~ 99.40.1 ~ 1.2-12 ~ 100---
1 Piece(s) 9 Day(s) or more 10SKH51+0.02/00.7 ~ 2.993BC---10 ~ 99.40.1 ~ 1.4-12 ~ 100---
1 Piece(s) 9 Day(s) or more 10SKH51+0.02/01 ~ 3.493.5BC---10 ~ 119.40.1 ~ 1.7-12 ~ 120---
1 Piece(s) 9 Day(s) or more 10SKH51+0.02/00.7 ~ 0.993.5BC---10 ~ 119.40.1 ~ 1.7-12 ~ 120---
1 Piece(s) 9 Day(s) or more 10SKH51+0.02/01 ~ 3.994BC---10 ~ 119.40.1 ~ 1.9-12 ~ 120---
1 Piece(s) 9 Day(s) or more 10SKH51+0.02/00.7 ~ 0.994BC---10 ~ 119.40.1 ~ 1.9-12 ~ 120---
1 Piece(s) 9 Day(s) or more 10SKH51+0.02/01 ~ 4.494.5BC---10 ~ 119.40.1 ~ 2.2-12 ~ 120---
1 Piece(s) 9 Day(s) or more 10SKH51+0.02/01 ~ 4.995BC---10 ~ 1500.1 ~ 2.4-12 ~ 150---
1 Piece(s) 9 Day(s) or more 10SKH51+0.02/01.5 ~ 5.495.5BC---10 ~ 1500.1 ~ 2.7-12 ~ 150---
1 Piece(s) 9 Day(s) or more 10SKH51+0.02/01 ~ 1.495.5BC---10 ~ 1500.1 ~ 2.7-12 ~ 150---
1 Piece(s) 9 Day(s) or more 10SKH51+0.02/02 ~ 5.996BC---10 ~ 1500.1 ~ 2.9-12 ~ 150---
1 Piece(s) 9 Day(s) or more 10SKH51+0.02/01.5 ~ 1.996BC---10 ~ 1500.1 ~ 2.9-12 ~ 150---
1 Piece(s) 9 Day(s) or more 10SKH51+0.02/02 ~ 6.496.5BC---10 ~ 1500.1 ~ 3.2-12 ~ 150---
1 Piece(s) 9 Day(s) or more 10SKH51+0.02/01.5 ~ 1.996.5BC---10 ~ 1500.1 ~ 3.2-12 ~ 150---
1 Piece(s) 9 Day(s) or more 10SKH51+0.02/02 ~ 6.997BC---10 ~ 1500.1 ~ 3.4-12 ~ 150---
1 Piece(s) 9 Day(s) or more 10SKH51+0.02/01.5 ~ 1.997BC---10 ~ 1500.1 ~ 3.4-12 ~ 150---
1 Piece(s) 9 Day(s) or more 10SKH51+0.02/02 ~ 7.998BC---10 ~ 1500.1 ~ 3.9-12 ~ 150---
1 Piece(s) 9 Day(s) or more 10SKH51+0.02/01.5 ~ 1.998BC---10 ~ 1500.1 ~ 3.9-12 ~ 150---
1 Piece(s) 9 Day(s) or more 10SKH51+0.02/02 ~ 9.9910BC---10 ~ 1500.1 ~ 4.9-12 ~ 150---
1 Piece(s) 9 Day(s) or more 10SKH51+0.02/01.5 ~ 1.9910BC---10 ~ 1500.1 ~ 4.9-12 ~ 150---
1 Piece(s) 10 Day(s) or more 10SKH51+0.02/02 ~ 12.9913BC---10 ~ 1500.1 ~ 6.4-12 ~ 150---
1 Piece(s) 10 Day(s) or more 10SKH51+0.02/01.5 ~ 1.9913BC---10 ~ 1500.1 ~ 6.4-12 ~ 150---
1 Piece(s) 10 Day(s) or more 10SKH51+0.02/02 ~ 15.9916BC---10 ~ 1500.1 ~ 7.9-12 ~ 150---
1 Piece(s) 10 Day(s) or more 10SKH51+0.02/01.5 ~ 1.9916BC---10 ~ 1500.1 ~ 7.9-12 ~ 150---

Loading...

 

Basic Information

Shape type One-step Shaft diameter tolerance 0/-0.005 Tip gradient tolerance 0/-0.01
Tip lapped or not No Type of the second step Step2 No second step

Tech Support

Mold
Tel:021-8990-5801 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)