(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

High Precision Linear Shafts - Stepped Ends / Stepped Ends with Wrench Flats - One End Threaded / Both Ends Threaded / One End Threaded / One End Tapped

High Precision Linear Shafts - Stepped Ends / Stepped Ends with Wrench Flats - One End Threaded / Both Ends Threaded / One End Threaded / One End Tapped

Click this image to zoom it.

Move the mouse over the image to zoom

  • High Precision Linear Shafts - Stepped Ends / Stepped Ends with Wrench Flats - One End Threaded / Both Ends Threaded / One End Threaded / One End Tapped
  • High Precision Linear Shafts - Stepped Ends / Stepped Ends with Wrench Flats - One End Threaded / Both Ends Threaded / One End Threaded / One End Tapped
  • High Precision Linear Shafts - Stepped Ends / Stepped Ends with Wrench Flats - One End Threaded / Both Ends Threaded / One End Threaded / One End Tapped

[Features] Linear motion shafts (linear shafts, hardened shafts, guide shafts, slide shafts) with high perpendicularity accuracy (0.03) and guaranteed coaxiality of 0.02.One end stepped, one end male thread/both ends female thread/one end Male thread/one end female thread/with spanner groove.

 

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
VFAD4-[25-195/1]-F[5-15/1]-B0-P3-M[0,​3]-J2
VFAD4-[25-195/1]-F[5-15/1]-B0-P3-MMC3-J2
VFAD4-[25-195/1]-F[5-15/1]-B[3-9/1]-P3-M[0,​3]-J2
VFAD4-[25-195/1]-F[5-15/1]-B[3-9/1]-P3-MMC3-J2
VFAD5-[25-295/1]-F[5-20/1]-B0-P[3,​4]-M[3,​4]-J[2.6,​3]
VFAD5-[25-295/1]-F[5-20/1]-B0-P[3,​4]-MMC[3,​4]-J[2.6,​3]
VFAD5-[25-295/1]-F[5-20/1]-B[3-12/1]-P[3,​4]-M[3,​4]-J[2.6,​3]
VFAD5-[25-295/1]-F[5-20/1]-B[3-12/1]-P[3,​4]-MMC[3,​4]-J[2.6,​3]
VFAD6-[25-295/1]-F[5-25/1]-B0-P[3,​4,​5]-M[3,​4,​5]-J3
VFAD6-[25-295/1]-F[5-25/1]-B0-P[3,​4,​5]-MMC[3,​4,​5]-J3
VFAD6-[25-295/1]-F[5-25/1]-B[3-12/1]-P[3,​4,​5]-M[3,​4,​5]-J3
VFAD6-[25-295/1]-F[5-25/1]-B[3-12/1]-P[3,​4,​5]-MMC[3,​4,​5]-J3
VFAD8-[25-295/1]-F[5-30/1]-B0-P[3,​4,​5,​6,​7]-M[3,​4,​5,​6]-J[3,​4,​5]
VFAD8-[25-295/1]-F[5-30/1]-B0-P[3,​4,​5,​6,​7]-MMC[3,​4,​5,​6]-J[3,​4,​5]
VFAD8-[25-295/1]-F[5-30/1]-B[3-18/1]-P[3,​4,​5,​6,​7]-M[3,​4,​5,​6]-J[3,​4,​5]
VFAD8-[25-295/1]-F[5-30/1]-B[3-18/1]-P[3,​4,​5,​6,​7]-MMC[3,​4,​5,​6]-J[3,​4,​5]
VFAD10-[25-345/1]-F[5-45/1]-B0-P[4-9/1]-M[4,​5,​6,​8]-J[3,​4,​5,​6]
VFAD10-[25-345/1]-F[5-45/1]-B0-P[4-9/1]-M[4,​5,​6,​8]-ND6
VFAD10-[25-345/1]-F[5-45/1]-B0-P[4-9/1]-MMC[4,​5,​6,​8]-J[3,​4,​5,​6]
VFAD10-[25-345/1]-F[5-45/1]-B0-P[4-9/1]-MMC[4,​5,​6,​8]-ND6
VFAD10-[25-345/1]-F[5-45/1]-B[4-24/1]-P[4-9/1]-M[4,​5,​6,​8]-J[3,​4,​5,​6]
VFAD10-[25-345/1]-F[5-45/1]-B[4-24/1]-P[4-9/1]-M[4,​5,​6,​8]-ND6
VFAD10-[25-345/1]-F[5-45/1]-B[4-24/1]-P[4-9/1]-MMC[4,​5,​6,​8]-J[3,​4,​5,​6]
VFAD10-[25-345/1]-F[5-45/1]-B[4-24/1]-P[4-9/1]-MMC[4,​5,​6,​8]-ND6
VFAD12-[25-345/1]-F[5-55/1]-B0-P[5-11/1]-M[5,​6,​8,​10]-J[4,​5,​6,​8]
VFAD12-[25-345/1]-F[5-55/1]-B0-P[5-11/1]-M[5,​6,​8,​10]-JSC8
VFAD12-[25-345/1]-F[5-55/1]-B0-P[5-11/1]-M[5,​6,​8,​10]-ND[6,​8]
VFAD12-[25-345/1]-F[5-55/1]-B0-P[5-11/1]-MMC[5,​6,​8,​10]-J[4,​5,​6,​8]
VFAD12-[25-345/1]-F[5-55/1]-B0-P[5-11/1]-MMC[5,​6,​8,​10]-JSC8
VFAD12-[25-345/1]-F[5-55/1]-B0-P[5-11/1]-MMC[5,​6,​8,​10]-ND[6,​8]
VFAD12-[25-345/1]-F[5-55/1]-B0-P[5-11/1]-MMS10-J[4,​5,​6,​8]
VFAD12-[25-345/1]-F[5-55/1]-B0-P[5-11/1]-MMS10-JSC8
VFAD12-[25-345/1]-F[5-55/1]-B0-P[5-11/1]-MMS10-ND[6,​8]
VFAD12-[25-345/1]-F[5-55/1]-B[5-30/1]-P[5-11/1]-M[5,​6,​8,​10]-J[4,​5,​6,​8]
VFAD12-[25-345/1]-F[5-55/1]-B[5-30/1]-P[5-11/1]-M[5,​6,​8,​10]-JSC8
VFAD12-[25-345/1]-F[5-55/1]-B[5-30/1]-P[5-11/1]-M[5,​6,​8,​10]-ND[6,​8]
VFAD12-[25-345/1]-F[5-55/1]-B[5-30/1]-P[5-11/1]-MMC[5,​6,​8,​10]-J[4,​5,​6,​8]
VFAD12-[25-345/1]-F[5-55/1]-B[5-30/1]-P[5-11/1]-MMC[5,​6,​8,​10]-JSC8
VFAD12-[25-345/1]-F[5-55/1]-B[5-30/1]-P[5-11/1]-MMC[5,​6,​8,​10]-ND[6,​8]
VFAD12-[25-345/1]-F[5-55/1]-B[5-30/1]-P[5-11/1]-MMS10-J[4,​5,​6,​8]
VFAD12-[25-345/1]-F[5-55/1]-B[5-30/1]-P[5-11/1]-MMS10-JSC8
VFAD12-[25-345/1]-F[5-55/1]-B[5-30/1]-P[5-11/1]-MMS10-ND[6,​8]
VFAD13-[25-345/1]-F[5-60/1]-B0-P[5-12/1]-M[5,​6,​8,​10]-J[4,​5,​6,​8]
VFAD13-[25-345/1]-F[5-60/1]-B0-P[5-12/1]-M[5,​6,​8,​10]-JSC8
VFAD13-[25-345/1]-F[5-60/1]-B0-P[5-12/1]-M[5,​6,​8,​10]-ND[6,​8]
VFAD13-[25-345/1]-F[5-60/1]-B0-P[5-12/1]-MMC[5,​6,​8,​10]-J[4,​5,​6,​8]
VFAD13-[25-345/1]-F[5-60/1]-B0-P[5-12/1]-MMC[5,​6,​8,​10]-JSC8
VFAD13-[25-345/1]-F[5-60/1]-B0-P[5-12/1]-MMC[5,​6,​8,​10]-ND[6,​8]
VFAD13-[25-345/1]-F[5-60/1]-B0-P[5-12/1]-MMS10-J[4,​5,​6,​8]
VFAD13-[25-345/1]-F[5-60/1]-B0-P[5-12/1]-MMS10-JSC8
VFAD13-[25-345/1]-F[5-60/1]-B0-P[5-12/1]-MMS10-ND[6,​8]
VFAD13-[25-345/1]-F[5-60/1]-B[5-30/1]-P[5-12/1]-M[5,​6,​8,​10]-J[4,​5,​6,​8]
VFAD13-[25-345/1]-F[5-60/1]-B[5-30/1]-P[5-12/1]-M[5,​6,​8,​10]-JSC8
VFAD13-[25-345/1]-F[5-60/1]-B[5-30/1]-P[5-12/1]-M[5,​6,​8,​10]-ND[6,​8]
VFAD13-[25-345/1]-F[5-60/1]-B[5-30/1]-P[5-12/1]-MMC[5,​6,​8,​10]-J[4,​5,​6,​8]
VFAD13-[25-345/1]-F[5-60/1]-B[5-30/1]-P[5-12/1]-MMC[5,​6,​8,​10]-JSC8
VFAD13-[25-345/1]-F[5-60/1]-B[5-30/1]-P[5-12/1]-MMC[5,​6,​8,​10]-ND[6,​8]
VFAD13-[25-345/1]-F[5-60/1]-B[5-30/1]-P[5-12/1]-MMS10-J[4,​5,​6,​8]
VFAD13-[25-345/1]-F[5-60/1]-B[5-30/1]-P[5-12/1]-MMS10-JSC8
VFAD13-[25-345/1]-F[5-60/1]-B[5-30/1]-P[5-12/1]-MMS10-ND[6,​8]
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSBasic Shape End Shape (Right) Material Surface Treatment Shaft Dia. D
(Ø)
Length L
(mm)
Hardness Add Wrench Flats at One Location [SC]
(mm)
B
(mm)
Change Tapped Thread J to Fine One [JSC]
(mm)
Change Thread M to Fine One [MMC]
(mm)
Change Thread M to Fine One [MMS]
(mm)
Change Thread N to Fine One [NMC]
(mm)
Change Thread N to Fine One [NMS]
(mm)
F
(mm)
P
(mm)
Q
(mm)
S
(mm)
T
(mm)
Tapped (Coarse, Effective Length: Nominal Dia. x 2) [J]
(mm)
Tapped (Coarse, Effective Length: Nominal Dia. x 3) [ND]
(mm)
Threaded (Coarse) [M]
(mm)
Threaded (Coarse) [N]
(mm)
1 Piece(s) 12 Day(s) or more 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided425 ~ 195Induction Hardened (58HRC~)-0-----5 ~ 153---2-0 ~ 3-
1 Piece(s) 12 Day(s) or more 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided425 ~ 195Induction Hardened (58HRC~)-0-3---5 ~ 153---2---
1 Piece(s) 12 Day(s) or more 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided425 ~ 195Induction Hardened (58HRC~)-3 ~ 9-----5 ~ 153---2-0 ~ 3-
1 Piece(s) 12 Day(s) or more 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided425 ~ 195Induction Hardened (58HRC~)-3 ~ 9-3---5 ~ 153---2---
1 Piece(s) 12 Day(s) or more 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided525 ~ 295Induction Hardened (58HRC~)-0-----5 ~ 203 ~ 4---2.6 ~ 3-3 ~ 4-
1 Piece(s) 12 Day(s) or more 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided525 ~ 295Induction Hardened (58HRC~)-0-3 ~ 4---5 ~ 203 ~ 4---2.6 ~ 3---
1 Piece(s) 12 Day(s) or more 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided525 ~ 295Induction Hardened (58HRC~)-3 ~ 12-----5 ~ 203 ~ 4---2.6 ~ 3-3 ~ 4-
1 Piece(s) 12 Day(s) or more 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided525 ~ 295Induction Hardened (58HRC~)-3 ~ 12-3 ~ 4---5 ~ 203 ~ 4---2.6 ~ 3---
1 Piece(s) 12 Day(s) or more 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided625 ~ 295Induction Hardened (58HRC~)-0-----5 ~ 253 ~ 5---3-3 ~ 5-
1 Piece(s) 12 Day(s) or more 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided625 ~ 295Induction Hardened (58HRC~)-0-3 ~ 5---5 ~ 253 ~ 5---3---
1 Piece(s) 12 Day(s) or more 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided625 ~ 295Induction Hardened (58HRC~)-3 ~ 12-----5 ~ 253 ~ 5---3-3 ~ 5-
1 Piece(s) 12 Day(s) or more 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided625 ~ 295Induction Hardened (58HRC~)-3 ~ 12-3 ~ 5---5 ~ 253 ~ 5---3---
1 Piece(s) 12 Day(s) or more 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided825 ~ 295Induction Hardened (58HRC~)-0-----5 ~ 303 ~ 7---3 ~ 5-3 ~ 6-
1 Piece(s) 12 Day(s) or more 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided825 ~ 295Induction Hardened (58HRC~)-0-3 ~ 6---5 ~ 303 ~ 7---3 ~ 5---
1 Piece(s) 12 Day(s) or more 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided825 ~ 295Induction Hardened (58HRC~)-3 ~ 18-----5 ~ 303 ~ 7---3 ~ 5-3 ~ 6-
1 Piece(s) 12 Day(s) or more 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided825 ~ 295Induction Hardened (58HRC~)-3 ~ 18-3 ~ 6---5 ~ 303 ~ 7---3 ~ 5---
1 Piece(s) 12 Day(s) or more 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1025 ~ 345Induction Hardened (58HRC~)-0-----5 ~ 454 ~ 9---3 ~ 6-4 ~ 8-
1 Piece(s) 12 Day(s) or more 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1025 ~ 345Induction Hardened (58HRC~)-0-----5 ~ 454 ~ 9----64 ~ 8-
1 Piece(s) 12 Day(s) or more 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1025 ~ 345Induction Hardened (58HRC~)-0-4 ~ 8---5 ~ 454 ~ 9---3 ~ 6---
1 Piece(s) 12 Day(s) or more 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1025 ~ 345Induction Hardened (58HRC~)-0-4 ~ 8---5 ~ 454 ~ 9----6--
1 Piece(s) 12 Day(s) or more 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1025 ~ 345Induction Hardened (58HRC~)-4 ~ 24-----5 ~ 454 ~ 9---3 ~ 6-4 ~ 8-
1 Piece(s) 12 Day(s) or more 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1025 ~ 345Induction Hardened (58HRC~)-4 ~ 24-----5 ~ 454 ~ 9----64 ~ 8-
1 Piece(s) 12 Day(s) or more 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1025 ~ 345Induction Hardened (58HRC~)-4 ~ 24-4 ~ 8---5 ~ 454 ~ 9---3 ~ 6---
1 Piece(s) 12 Day(s) or more 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1025 ~ 345Induction Hardened (58HRC~)-4 ~ 24-4 ~ 8---5 ~ 454 ~ 9----6--
1 Piece(s) 12 Day(s) or more 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1225 ~ 345Induction Hardened (58HRC~)-0-----5 ~ 555 ~ 11---4 ~ 8-5 ~ 10-
1 Piece(s) 12 Day(s) or more 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1225 ~ 345Induction Hardened (58HRC~)-08----5 ~ 555 ~ 11-----5 ~ 10-
1 Piece(s) 12 Day(s) or more 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1225 ~ 345Induction Hardened (58HRC~)-0-----5 ~ 555 ~ 11----6 ~ 85 ~ 10-
1 Piece(s) 12 Day(s) or more 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1225 ~ 345Induction Hardened (58HRC~)-0-5 ~ 10---5 ~ 555 ~ 11---4 ~ 8---
1 Piece(s) 12 Day(s) or more 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1225 ~ 345Induction Hardened (58HRC~)-085 ~ 10---5 ~ 555 ~ 11-------
1 Piece(s) 12 Day(s) or more 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1225 ~ 345Induction Hardened (58HRC~)-0-5 ~ 10---5 ~ 555 ~ 11----6 ~ 8--
1 Piece(s) 12 Day(s) or more 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1225 ~ 345Induction Hardened (58HRC~)-0--10--5 ~ 555 ~ 11---4 ~ 8---
1 Piece(s) 12 Day(s) or more 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1225 ~ 345Induction Hardened (58HRC~)-08-10--5 ~ 555 ~ 11-------
1 Piece(s) 12 Day(s) or more 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1225 ~ 345Induction Hardened (58HRC~)-0--10--5 ~ 555 ~ 11----6 ~ 8--
1 Piece(s) 12 Day(s) or more 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1225 ~ 345Induction Hardened (58HRC~)-5 ~ 30-----5 ~ 555 ~ 11---4 ~ 8-5 ~ 10-
1 Piece(s) 12 Day(s) or more 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1225 ~ 345Induction Hardened (58HRC~)-5 ~ 308----5 ~ 555 ~ 11-----5 ~ 10-
1 Piece(s) 12 Day(s) or more 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1225 ~ 345Induction Hardened (58HRC~)-5 ~ 30-----5 ~ 555 ~ 11----6 ~ 85 ~ 10-
1 Piece(s) 12 Day(s) or more 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1225 ~ 345Induction Hardened (58HRC~)-5 ~ 30-5 ~ 10---5 ~ 555 ~ 11---4 ~ 8---
1 Piece(s) 12 Day(s) or more 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1225 ~ 345Induction Hardened (58HRC~)-5 ~ 3085 ~ 10---5 ~ 555 ~ 11-------
1 Piece(s) 12 Day(s) or more 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1225 ~ 345Induction Hardened (58HRC~)-5 ~ 30-5 ~ 10---5 ~ 555 ~ 11----6 ~ 8--
1 Piece(s) 12 Day(s) or more 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1225 ~ 345Induction Hardened (58HRC~)-5 ~ 30--10--5 ~ 555 ~ 11---4 ~ 8---
1 Piece(s) 12 Day(s) or more 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1225 ~ 345Induction Hardened (58HRC~)-5 ~ 308-10--5 ~ 555 ~ 11-------
1 Piece(s) 12 Day(s) or more 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1225 ~ 345Induction Hardened (58HRC~)-5 ~ 30--10--5 ~ 555 ~ 11----6 ~ 8--
1 Piece(s) 12 Day(s) or more 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1325 ~ 345Induction Hardened (58HRC~)-0-----5 ~ 605 ~ 12---4 ~ 8-5 ~ 10-
1 Piece(s) 12 Day(s) or more 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1325 ~ 345Induction Hardened (58HRC~)-08----5 ~ 605 ~ 12-----5 ~ 10-
1 Piece(s) 12 Day(s) or more 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1325 ~ 345Induction Hardened (58HRC~)-0-----5 ~ 605 ~ 12----6 ~ 85 ~ 10-
1 Piece(s) 12 Day(s) or more 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1325 ~ 345Induction Hardened (58HRC~)-0-5 ~ 10---5 ~ 605 ~ 12---4 ~ 8---
1 Piece(s) 12 Day(s) or more 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1325 ~ 345Induction Hardened (58HRC~)-085 ~ 10---5 ~ 605 ~ 12-------
1 Piece(s) 12 Day(s) or more 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1325 ~ 345Induction Hardened (58HRC~)-0-5 ~ 10---5 ~ 605 ~ 12----6 ~ 8--
1 Piece(s) 12 Day(s) or more 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1325 ~ 345Induction Hardened (58HRC~)-0--10--5 ~ 605 ~ 12---4 ~ 8---
1 Piece(s) 12 Day(s) or more 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1325 ~ 345Induction Hardened (58HRC~)-08-10--5 ~ 605 ~ 12-------
1 Piece(s) 12 Day(s) or more 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1325 ~ 345Induction Hardened (58HRC~)-0--10--5 ~ 605 ~ 12----6 ~ 8--
1 Piece(s) 12 Day(s) or more 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1325 ~ 345Induction Hardened (58HRC~)-5 ~ 30-----5 ~ 605 ~ 12---4 ~ 8-5 ~ 10-
1 Piece(s) 12 Day(s) or more 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1325 ~ 345Induction Hardened (58HRC~)-5 ~ 308----5 ~ 605 ~ 12-----5 ~ 10-
1 Piece(s) 12 Day(s) or more 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1325 ~ 345Induction Hardened (58HRC~)-5 ~ 30-----5 ~ 605 ~ 12----6 ~ 85 ~ 10-
1 Piece(s) 12 Day(s) or more 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1325 ~ 345Induction Hardened (58HRC~)-5 ~ 30-5 ~ 10---5 ~ 605 ~ 12---4 ~ 8---
1 Piece(s) 12 Day(s) or more 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1325 ~ 345Induction Hardened (58HRC~)-5 ~ 3085 ~ 10---5 ~ 605 ~ 12-------
1 Piece(s) 12 Day(s) or more 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1325 ~ 345Induction Hardened (58HRC~)-5 ~ 30-5 ~ 10---5 ~ 605 ~ 12----6 ~ 8--
1 Piece(s) 12 Day(s) or more 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1325 ~ 345Induction Hardened (58HRC~)-5 ~ 30--10--5 ~ 605 ~ 12---4 ~ 8---
1 Piece(s) 12 Day(s) or more 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1325 ~ 345Induction Hardened (58HRC~)-5 ~ 308-10--5 ~ 605 ~ 12-------
1 Piece(s) 12 Day(s) or more 10One End SteppedTapped[Steel] SUJ2 EquivalentNot Provided1325 ~ 345Induction Hardened (58HRC~)-5 ~ 30--10--5 ~ 605 ~ 12----6 ~ 8--

Loading...

Basic Information

End Shape (Left) Threaded Shaft End Perpendicularity Perpendicularity (0.03) Heat Treatment Induction Hardened
Shaft Fit Tolerance g6

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)