(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Hollow Shafts / End-Washers for Linear Shafts - Shaft Ends Configurable

Hollow Shafts / End-Washers for Linear Shafts - Shaft Ends Configurable

Click this image to zoom it.

Move the mouse over the image to zoom

[Features] Various combinations of both ends' shapes are available.

 

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
FPSPJAA-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]
FPSPJAB-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-N[3,​4,​5,​6,​8,​10,​12,​16,​20,​24,​30]
FPSPJAC-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-T[0-250/0.5]-N[3,​4,​5,​6,​8,​10,​12,​16,​20,​24,​30]-S[0-90/1]
FPSPJAC-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-T[0-250/0.5]-QMC[0,​3,​4,​5,​6,​8,​15,​17,​20,​25,​30]-S[0-90/1]
FPSPJAC-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-T[0-250/0.5]-QMS[10,​12,​14,​18]-S[0-90/1]
FPSPJAD-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-T[0-250/0.5]-Q[2-50/1]
FPSPJAE-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-T[0-250/0.5]-N[0,​3,​4,​5,​6,​8,​12,​16,​20,​24,​30]-Q[2-50/1]
FPSPJAF-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-U[1-1500/1]
FPSPJBA-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-M[3,​4,​5,​6,​8,​10,​12,​16,​20,​24,​30]
FPSPJBB-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-M[3,​4,​5,​6,​8,​10,​12,​16,​20,​24,​30]-N[3,​4,​5,​6,​8,​10,​12,​16,​20,​24,​30]
FPSPJBC-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-M[3,​4,​5,​6,​8,​10,​12,​16,​20,​24,​30]-T[0-250/0.5]-N[3,​4,​5,​6,​8,​10,​12,​16,​20,​24,​30]-S[0-90/1]
FPSPJBC-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-M[3,​4,​5,​6,​8,​10,​12,​16,​20,​24,​30]-T[0-250/0.5]-QMC[0,​3,​4,​5,​6,​8,​15,​17,​20,​25,​30]-S[0-90/1]
FPSPJBC-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-M[3,​4,​5,​6,​8,​10,​12,​16,​20,​24,​30]-T[0-250/0.5]-QMS[10,​12,​14,​18]-S[0-90/1]
FPSPJBD-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-M[3,​4,​5,​6,​8,​10,​12,​16,​20,​24,​30]-T[0-250/0.5]-Q[2-50/1]
FPSPJBE-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-M[3,​4,​5,​6,​8,​10,​12,​16,​20,​24,​30]-T[0-250/0.5]-N[0,​3,​4,​5,​6,​8,​12,​16,​20,​24,​30]-Q[2-50/1]
FPSPJBF-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-M[0,​3,​4,​5,​6,​8,​12,​16,​20,​24,​30]-U[1-1500/1]
FPSPJCA-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,​4,​5,​6,​8,​10,​12,​16,​20,​24,​30]-B[0-90/1]
FPSPJCB-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,​4,​5,​6,​8,​10,​12,​16,​20,​24,​30]-B[0-90/1]-N[3,​4,​5,​6,​8,​10,​12,​16,​20,​24,​30]
FPSPJCC-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,​4,​5,​6,​8,​10,​12,​16,​20,​24,​30]-B[0-90/1]-T[0-250/0.5]-N[3,​4,​5,​6,​8,​10,​12,​16,​20,​24,​30]-S[0-90/1]
FPSPJCC-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,​4,​5,​6,​8,​10,​12,​16,​20,​24,​30]-B[0-90/1]-T[0-250/0.5]-QMC[0,​3,​4,​5,​6,​8,​15,​17,​20,​25,​30]-S[0-90/1]
FPSPJCC-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,​4,​5,​6,​8,​10,​12,​16,​20,​24,​30]-B[0-90/1]-T[0-250/0.5]-QMS[10,​12,​14,​18]-S[0-90/1]
FPSPJCD-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,​4,​5,​6,​8,​10,​12,​16,​20,​24,​30]-B[0-90/1]-T[0-250/0.5]-Q[2-50/1]
FPSPJCE-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,​4,​5,​6,​8,​10,​12,​16,​20,​24,​30]-B[0-90/1]-T[0-250/0.5]-N[3,​4,​5,​6,​8,​10,​12,​16,​20,​24,​30]-Q[2-50/1]
FPSPJCF-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,​4,​5,​6,​8,​10,​12,​16,​20,​24,​30]-B[0-90/1]-U[1-1500/1]
FPSPJDA-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-F[0-250/0.5]-P[2-50/1]
FPSPJDB-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-F[0-250/0.5]-N[3,​4,​5,​6,​8,​10,​12,​16,​20,​24,​30]-P[2-50/1]
FPSPJDC-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-F[0-250/0.5]-T[0-250/0.5]-N[3,​4,​5,​6,​8,​10,​12,​16,​20,​24,​30]-S[0-90/1]-P[2-50/1]
FPSPJDC-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-F[0-250/0.5]-T[0-250/0.5]-QMC[0,​3,​4,​5,​6,​8,​15,​17,​20,​25,​30]-S[0-90/1]-P[2-50/1]
FPSPJDC-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-F[0-250/0.5]-T[0-250/0.5]-QMS[10,​12,​14,​18]-S[0-90/1]-P[2-50/1]
FPSPJDD-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-F[0-250/0.5]-T[0-250/0.5]-P[2-50/1]-Q[2-50/1]
FPSPJDE-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-F[0-250/0.5]-T[0-250/0.5]-N[0,​3,​4,​5,​6,​8,​12,​16,​20,​24,​30]-P[2-50/1]-Q[2-50/1]
FPSPJDF-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-F[0-250/0.5]-U[1-1500/1]-P[2-50/1]
FPSPJEA-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-F[0-250/0.5]-M[0,​3,​4,​5,​6,​8,​12,​16,​20,​24,​30]-P[2-50/1]
FPSPJEB-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-F[0-250/0.5]-M[0,​3,​4,​5,​6,​8,​12,​16,​20,​24,​30]-N[3,​4,​5,​6,​8,​10,​12,​16,​20,​24,​30]-P[2-50/1]
FPSPJEC-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-F[0-250/0.5]-M[0,​3,​4,​5,​6,​8,​12,​16,​20,​24,​30]-T[0-250/0.5]-N[3,​4,​5,​6,​8,​10,​12,​16,​20,​24,​30]-S[0-90/1]-P[2-50/1]
FPSPJEC-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-F[0-250/0.5]-M[0,​3,​4,​5,​6,​8,​12,​16,​20,​24,​30]-T[0-250/0.5]-QMC[0,​3,​4,​5,​6,​8,​15,​17,​20,​25,​30]-S[0-90/1]-P[2-50/1]
FPSPJEC-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-F[0-250/0.5]-M[0,​3,​4,​5,​6,​8,​12,​16,​20,​24,​30]-T[0-250/0.5]-QMS[10,​12,​14,​18]-S[0-90/1]-P[2-50/1]
FPSPJED-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-F[0-250/0.5]-M[0,​3,​4,​5,​6,​8,​12,​16,​20,​24,​30]-T[0-250/0.5]-P[2-50/1]-Q[2-50/1]
FPSPJEE-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,​4,​5,​6,​8,​10,​12,​16,​20,​24,​30]-T[0-250/0.5]-N[3,​4,​5,​6,​8,​10,​12,​16,​20,​24,​30]-P[2-50/1]-Q[2-50/1]
FPSPJEF-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-F[0-250/0.5]-M[0,​3,​4,​5,​6,​8,​12,​16,​20,​24,​30]-U[1-1500/1]-P[2-50/1]
FPSPJFA-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-H[1-1500/1]
FPSPJFB-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-N[3,​4,​5,​6,​8,​10,​12,​16,​20,​24,​30]-H[1-1500/1]
FPSPJFC-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-T[0-250/0.5]-N[3,​4,​5,​6,​8,​10,​12,​16,​20,​24,​30]-S[0-90/1]-H[1-1500/1]
FPSPJFC-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-T[0-250/0.5]-QMC[0,​3,​4,​5,​6,​8,​15,​17,​20,​25,​30]-S[0-90/1]-H[1-1500/1]
FPSPJFC-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-T[0-250/0.5]-QMS[10,​12,​14,​18]-S[0-90/1]-H[1-1500/1]
FPSPJFD-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-T[0-250/0.5]-H[1-1500/1]-Q[2-50/1]
FPSPJFE-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-T[0-250/0.5]-N[0,​3,​4,​5,​6,​8,​12,​16,​20,​24,​30]-H[1-1500/1]-Q[2-50/1]
FPSPJFF-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-H[1-1500/1]-U[1-1500/1]
FSPJAA-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]
FSPJAB-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-N[3,​4,​5,​6,​8,​10,​12,​16,​20,​24,​30]
FSPJAC-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-T[0-250/0.5]-N[3,​4,​5,​6,​8,​10,​12,​16,​20,​24,​30]-S[0-90/1]
FSPJAC-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-T[0-250/0.5]-QMC[0,​3,​4,​5,​6,​8,​15,​17,​20,​25,​30]-S[0-90/1]
FSPJAC-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-T[0-250/0.5]-QMS[10,​12,​14,​18]-S[0-90/1]
FSPJAD-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-T[0-250/0.5]-Q[2-50/1]
FSPJAE-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-T[0-250/0.5]-N[0,​3,​4,​5,​6,​8,​12,​16,​20,​24,​30]-Q[2-50/1]
FSPJAF-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-U[1-1500/1]
FSPJBA-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-M[3,​4,​5,​6,​8,​10,​12,​16,​20,​24,​30]
FSPJBB-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-M[3,​4,​5,​6,​8,​10,​12,​16,​20,​24,​30]-N[3,​4,​5,​6,​8,​10,​12,​16,​20,​24,​30]
FSPJBC-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-M[0,​3,​4,​5,​6,​8,​10,​12,​16,​20,​24,​30]-T[0-250/0.5]-N[0,​3,​4,​5,​6,​8,​10,​12,​16,​20,​24,​30]-S[0-90/1]
FSPJBD-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-M[0,​3,​4,​5,​6,​8,​12,​16,​20,​24,​30]-T[0-250/0.5]-Q[2-50/1]
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSBasic Shape End Shape (Left) End Shape (Right) Surface Treatment Shaft Dia. D
(Ø)
Length L
(mm)
B
(mm)
Change to Fine Thread [QMC]
(mm)
Change to Fine Thread [QMS]
(mm)
Coarse [M]
(mm)
Coarse [N]
(mm)
F
(mm)
H
(mm)
P
(mm)
Q
(mm)
S
(mm)
T
(mm)
U
(mm)
1 Piece(s) 12 Day(s) or more 10HollowNo MachiningNo MachiningHard Chrome Plating6 ~ 5020 ~ 1500------------
1 Piece(s) 12 Day(s) or more 10HollowNo MachiningTappedHard Chrome Plating6 ~ 5020 ~ 1500----3 ~ 30-------
1 Piece(s) 12 Day(s) or more 10HollowNo MachiningThreadedHard Chrome Plating6 ~ 5020 ~ 1500----3 ~ 30----0 ~ 900 ~ 250-
1 Piece(s) 12 Day(s) or more 10HollowNo MachiningThreadedHard Chrome Plating6 ~ 5020 ~ 1500-0 ~ 30-------0 ~ 900 ~ 250-
1 Piece(s) 12 Day(s) or more 10HollowNo MachiningThreadedHard Chrome Plating6 ~ 5020 ~ 1500--10 ~ 18------0 ~ 900 ~ 250-
1 Piece(s) 12 Day(s) or more 10Hollow, One End SteppedNo MachiningNo MachiningHard Chrome Plating6 ~ 5020 ~ 1500--------2 ~ 50-0 ~ 250-
1 Piece(s) 12 Day(s) or more 10Hollow, One End SteppedNo MachiningTappedHard Chrome Plating6 ~ 5020 ~ 1500----0 ~ 30---2 ~ 50-0 ~ 250-
1 Piece(s) 12 Day(s) or more 10HollowNo MachiningWith Retaining Ring GroovesHard Chrome Plating6 ~ 5020 ~ 1500-----------1 ~ 1500
1 Piece(s) 12 Day(s) or more 10HollowTappedNo MachiningHard Chrome Plating6 ~ 5020 ~ 1500---3 ~ 30--------
1 Piece(s) 12 Day(s) or more 10HollowTappedTappedHard Chrome Plating6 ~ 5020 ~ 1500---3 ~ 303 ~ 30-------
1 Piece(s) 12 Day(s) or more 10HollowTappedThreadedHard Chrome Plating6 ~ 5020 ~ 1500---3 ~ 303 ~ 30----0 ~ 900 ~ 250-
1 Piece(s) 12 Day(s) or more 10HollowTappedThreadedHard Chrome Plating6 ~ 5020 ~ 1500-0 ~ 30-3 ~ 30-----0 ~ 900 ~ 250-
1 Piece(s) 12 Day(s) or more 10HollowTappedThreadedHard Chrome Plating6 ~ 5020 ~ 1500--10 ~ 183 ~ 30-----0 ~ 900 ~ 250-
1 Piece(s) 12 Day(s) or more 10Hollow, One End SteppedTappedNo MachiningHard Chrome Plating6 ~ 5020 ~ 1500---3 ~ 30----2 ~ 50-0 ~ 250-
1 Piece(s) 12 Day(s) or more 10Hollow, One End SteppedTappedTappedHard Chrome Plating6 ~ 5020 ~ 1500---3 ~ 300 ~ 30---2 ~ 50-0 ~ 250-
1 Piece(s) 12 Day(s) or more 10HollowTappedWith Retaining Ring GroovesHard Chrome Plating6 ~ 5020 ~ 1500---0 ~ 30-------1 ~ 1500
1 Piece(s) 12 Day(s) or more 10HollowThreadedNo MachiningHard Chrome Plating6 ~ 5020 ~ 15000 ~ 90--3 ~ 30-0 ~ 250------
1 Piece(s) 12 Day(s) or more 10HollowThreadedTappedHard Chrome Plating6 ~ 5020 ~ 15000 ~ 90--3 ~ 303 ~ 300 ~ 250------
1 Piece(s) 12 Day(s) or more 10HollowThreadedThreadedHard Chrome Plating6 ~ 5020 ~ 15000 ~ 90--3 ~ 303 ~ 300 ~ 250---0 ~ 900 ~ 250-
1 Piece(s) 12 Day(s) or more 10HollowThreadedThreadedHard Chrome Plating6 ~ 5020 ~ 15000 ~ 900 ~ 30-3 ~ 30-0 ~ 250---0 ~ 900 ~ 250-
1 Piece(s) 12 Day(s) or more 10HollowThreadedThreadedHard Chrome Plating6 ~ 5020 ~ 15000 ~ 90-10 ~ 183 ~ 30-0 ~ 250---0 ~ 900 ~ 250-
1 Piece(s) 12 Day(s) or more 10Hollow, One End SteppedThreadedNo MachiningHard Chrome Plating6 ~ 5020 ~ 15000 ~ 90--3 ~ 30-0 ~ 250--2 ~ 50-0 ~ 250-
1 Piece(s) 12 Day(s) or more 10Hollow, One End SteppedThreadedTappedHard Chrome Plating6 ~ 5020 ~ 15000 ~ 90--3 ~ 303 ~ 300 ~ 250--2 ~ 50-0 ~ 250-
1 Piece(s) 12 Day(s) or more 10HollowThreadedWith Retaining Ring GroovesHard Chrome Plating6 ~ 5020 ~ 15000 ~ 90--3 ~ 30-0 ~ 250-----1 ~ 1500
1 Piece(s) 12 Day(s) or more 10Hollow, One End SteppedNo MachiningNo MachiningHard Chrome Plating6 ~ 5020 ~ 1500-----0 ~ 250-2 ~ 50----
1 Piece(s) 12 Day(s) or more 10Hollow, One End SteppedNo MachiningTappedHard Chrome Plating6 ~ 5020 ~ 1500----3 ~ 300 ~ 250-2 ~ 50----
1 Piece(s) 12 Day(s) or more 10Hollow, One End SteppedNo MachiningThreadedHard Chrome Plating6 ~ 5020 ~ 1500----3 ~ 300 ~ 250-2 ~ 50-0 ~ 900 ~ 250-
1 Piece(s) 12 Day(s) or more 10Hollow, One End SteppedNo MachiningThreadedHard Chrome Plating6 ~ 5020 ~ 1500-0 ~ 30---0 ~ 250-2 ~ 50-0 ~ 900 ~ 250-
1 Piece(s) 12 Day(s) or more 10Hollow, One End SteppedNo MachiningThreadedHard Chrome Plating6 ~ 5020 ~ 1500--10 ~ 18--0 ~ 250-2 ~ 50-0 ~ 900 ~ 250-
1 Piece(s) 12 Day(s) or more 10Hollow, Both Ends SteppedNo MachiningNo MachiningHard Chrome Plating6 ~ 5020 ~ 1500-----0 ~ 250-2 ~ 502 ~ 50-0 ~ 250-
1 Piece(s) 12 Day(s) or more 10Hollow, Both Ends SteppedNo MachiningTappedHard Chrome Plating6 ~ 5020 ~ 1500----0 ~ 300 ~ 250-2 ~ 502 ~ 50-0 ~ 250-
1 Piece(s) 12 Day(s) or more 10Hollow, One End SteppedNo MachiningWith Retaining Ring GroovesHard Chrome Plating6 ~ 5020 ~ 1500-----0 ~ 250-2 ~ 50---1 ~ 1500
1 Piece(s) 12 Day(s) or more 10Hollow, One End SteppedTappedNo MachiningHard Chrome Plating6 ~ 5020 ~ 1500---0 ~ 30-0 ~ 250-2 ~ 50----
1 Piece(s) 12 Day(s) or more 10Hollow, One End SteppedTappedTappedHard Chrome Plating6 ~ 5020 ~ 1500---0 ~ 303 ~ 300 ~ 250-2 ~ 50----
1 Piece(s) 12 Day(s) or more 10Hollow, One End SteppedTappedThreadedHard Chrome Plating6 ~ 5020 ~ 1500---0 ~ 303 ~ 300 ~ 250-2 ~ 50-0 ~ 900 ~ 250-
1 Piece(s) 12 Day(s) or more 10Hollow, One End SteppedTappedThreadedHard Chrome Plating6 ~ 5020 ~ 1500-0 ~ 30-0 ~ 30-0 ~ 250-2 ~ 50-0 ~ 900 ~ 250-
1 Piece(s) 12 Day(s) or more 10Hollow, One End SteppedTappedThreadedHard Chrome Plating6 ~ 5020 ~ 1500--10 ~ 180 ~ 30-0 ~ 250-2 ~ 50-0 ~ 900 ~ 250-
1 Piece(s) 12 Day(s) or more 10Hollow, Both Ends SteppedTappedNo MachiningHard Chrome Plating6 ~ 5020 ~ 1500---0 ~ 30-0 ~ 250-2 ~ 502 ~ 50-0 ~ 250-
1 Piece(s) 12 Day(s) or more 10Hollow, Both Ends SteppedTappedTappedHard Chrome Plating6 ~ 5020 ~ 1500---3 ~ 303 ~ 300 ~ 250-2 ~ 502 ~ 50-0 ~ 250-
1 Piece(s) 12 Day(s) or more 10Hollow, One End SteppedTappedWith Retaining Ring GroovesHard Chrome Plating6 ~ 5020 ~ 1500---0 ~ 30-0 ~ 250-2 ~ 50---1 ~ 1500
1 Piece(s) 12 Day(s) or more 10HollowWith Retaining Ring GroovesNo MachiningHard Chrome Plating6 ~ 5020 ~ 1500------1 ~ 1500-----
1 Piece(s) 12 Day(s) or more 10HollowWith Retaining Ring GroovesTappedHard Chrome Plating6 ~ 5020 ~ 1500----3 ~ 30-1 ~ 1500-----
1 Piece(s) 12 Day(s) or more 10HollowWith Retaining Ring GroovesThreadedHard Chrome Plating6 ~ 5020 ~ 1500----3 ~ 30-1 ~ 1500--0 ~ 900 ~ 250-
1 Piece(s) 12 Day(s) or more 10HollowWith Retaining Ring GroovesThreadedHard Chrome Plating6 ~ 5020 ~ 1500-0 ~ 30----1 ~ 1500--0 ~ 900 ~ 250-
1 Piece(s) 12 Day(s) or more 10HollowWith Retaining Ring GroovesThreadedHard Chrome Plating6 ~ 5020 ~ 1500--10 ~ 18---1 ~ 1500--0 ~ 900 ~ 250-
1 Piece(s) 12 Day(s) or more 10Hollow, One End SteppedWith Retaining Ring GroovesNo MachiningHard Chrome Plating6 ~ 5020 ~ 1500------1 ~ 1500-2 ~ 50-0 ~ 250-
1 Piece(s) 12 Day(s) or more 10Hollow, One End SteppedWith Retaining Ring GroovesTappedHard Chrome Plating6 ~ 5020 ~ 1500----0 ~ 30-1 ~ 1500-2 ~ 50-0 ~ 250-
1 Piece(s) 12 Day(s) or more 10HollowWith Retaining Ring GroovesWith Retaining Ring GroovesHard Chrome Plating6 ~ 5020 ~ 1500------1 ~ 1500----1 ~ 1500
1 Piece(s) 12 Day(s) or more 10HollowNo MachiningNo MachiningNot Provided6 ~ 5020 ~ 1500------------
1 Piece(s) 12 Day(s) or more 10HollowNo MachiningTappedNot Provided6 ~ 5020 ~ 1500----3 ~ 30-------
1 Piece(s) 12 Day(s) or more 10HollowNo MachiningThreadedNot Provided6 ~ 5020 ~ 1500----3 ~ 30----0 ~ 900 ~ 250-
1 Piece(s) 12 Day(s) or more 10HollowNo MachiningThreadedNot Provided6 ~ 5020 ~ 1500-0 ~ 30-------0 ~ 900 ~ 250-
1 Piece(s) 12 Day(s) or more 10HollowNo MachiningThreadedNot Provided6 ~ 5020 ~ 1500--10 ~ 18------0 ~ 900 ~ 250-
1 Piece(s) 12 Day(s) or more 10Hollow, One End SteppedNo MachiningNo MachiningNot Provided6 ~ 5020 ~ 1500--------2 ~ 50-0 ~ 250-
1 Piece(s) 12 Day(s) or more 10Hollow, One End SteppedNo MachiningTappedNot Provided6 ~ 5020 ~ 1500----0 ~ 30---2 ~ 50-0 ~ 250-
1 Piece(s) 12 Day(s) or more 10HollowNo MachiningWith Retaining Ring GroovesNot Provided6 ~ 5020 ~ 1500-----------1 ~ 1500
1 Piece(s) 12 Day(s) or more 10HollowTappedNo MachiningNot Provided6 ~ 5020 ~ 1500---3 ~ 30--------
1 Piece(s) 12 Day(s) or more 10HollowTappedTappedNot Provided6 ~ 5020 ~ 1500---3 ~ 303 ~ 30-------
1 Piece(s) 12 Day(s) or more 10HollowTappedThreadedNot Provided6 ~ 5020 ~ 1500---0 ~ 300 ~ 30----0 ~ 900 ~ 250-
1 Piece(s) 12 Day(s) or more 10Hollow, One End SteppedTappedNo MachiningNot Provided6 ~ 5020 ~ 1500---0 ~ 30----2 ~ 50-0 ~ 250-

Loading...

Basic Information

Material SUJ2 Equivalent Heat Treatment Induction Hardened Shaft Fit Tolerance g6
Hardness Induction Hardened (58HRC~)

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)