(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Ball Splines - Standard

Ball Splines - Standard

Click this image to zoom it.

Move the mouse over the image to zoom

This is the least expensive ball spline suitable for fixation using shaft holders, etc., or for incorporating into plates. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design.
A dustproof seal is attached to the nut, so the ball will not fall off even if the spline shaft is removed.

(i)Caution

  • Please check the content on our website as the PDF does not contain the most up-to-date information.
StandardSpline Shafts [ M ] Spline Shaft SUJ2 Equivalent
[ M ] SCM415 Equivalent [ H ] Hardness: 58HRC~
Spline Shaft, Nut [ M ] Material: SUS440C Equivalent [ H ] Hardness: 55HRC~
Nut 1 pc.Nut 2 pcs.Nut 1 pc.
L Dimension SelectableL Dimension ConfigurableL Dimension SelectableL Dimension ConfigurableL Dimension SelectableL Dimension Configurable
With Round Flange NutBSSMBHSMBSS2MBHS2MBESKFSBASKFS
With Compact Flange NutBSSNBHSNBSS2NBHS2N--
With Straight NutBSSSBHSSBSS2SBHS2SBESKSSBASKSS

Specifications

Part Number-L
BHS2M10
BSSS8

BHS2M10G
BSSS8L
-
-
-
-
555
300
555
300
Alternative grease types available.
For Days to Ship, Price and Performance, see >>P.340
■Spline Shaft L dim. Selectable Type
Part NumberL Selection (mm)DMass (kg/m)
TypeNo.
BSSM
BSS
N
BSSS
BSS2M
BSS2N

BSS2S
BESKFS
BESKSS
6150*200*300400       60.23
8150*200*300400       80.39
10150200*300*400*500600     10.40.65
13150200*300*400*500600     13.41.11
16150200*300*400*500600     16.61.65
20150200300400500600700    20.62.57
25150200300400500600700800900  25.84.04
301502003004005006007008009001000115030.85.85
[ ! ]Only * marked sizes are available for BESKFS and BASKSS.
[ ! ]For BSSN and BSS2N, only No. 6, 8 and 10 are available.
■Spline Shafts L Dimension Configurable
Part NumberL 1mm IncrementDMass (kg/m)
TypeNo.1-Nut Type2-Nut Type
BHSM
BHSN
BHSS

BHS2M
BHS2N

BHS2S
B
ASKFS
BASKSS
*660~400(200)60~40060.23
*860~400(200)60~40080.39
*1060~600(400)90~60010.40.65
*1360~600(400)100~60013.41.11
*1670~600(400)110~60016.61.65
2080~ 700130~70020.62.57
2590~ 900150~90025.84.04
30100~1150170~115030.85.85
[ ! ]For BASKFS and BASKSS, only * marked sizes are available, and the Max. L dimension is in ( ).
[ ! ]For BHSN and BHS2N, only No. 6, 8 and 10 are available.
■Round Flange Nuts, Compact Flange Nuts
No.D(h6)LDfHP.C.D.d1d2hWdBBasic Rated TorqueBasic Load RatingAllowable Static MomentMass
(kg)
Dynamic Ct
(N · m)
Static C0t
(N · m)
Dynamic C
(kN)
Static C0
(kN)
M01
(N · m)
M02
(N · m)
61425306223.563.16.51.5183.871.22.15360.03
8163224214.88.71.22.15360.04
102140(33)42(41)6(8)32(30)4.584.4(5.3)14(8.5)2519(11)34(21)3.8(2.4)6.9(4.3)26(15)181(102)0.09
132444(36)44(45)7(8)33(34)15(10)-28(20)52(37)4.6(3.3)8.3(5.9)36(22)251(148)0.11
163150517404.41851936.211.1563860.2
203563589455.59.55.422.52851548.515.3836110.3
254271655226.519334815.427.717312480.4
3047807510606.6116.5302.527249018.533.321215810.57
[ ! ]Dimensions in ( ) are for SUS440C Equivalent. [ ! ]Allowable static moment M01 is a value measured when a single nut is used, and M02 is a value measured when two nuts are used.
■Straight Nuts
No.D
(h6)
Lb t
( +0.05
0 )
dαBasic Rated TorqueBasic Load RatingAllowable Static MomentMass
(kg)
Dimensions of Key (Included)
ToleranceDynamic Ct
(N · m)
Static C0t
(N · m)
Dynamic C
(kN)
Static C0
(kN)
M01
(N · m)
M02
(N · m)
B h L1R
ToleranceTolerance
614252.5+0.014
0
1.21.515°3.871.22.15360.0122.5+0.016
+0.006
2.50
-0.025
10.51.25
81625°4.88.71.22.15360.01310.5
102140(33)31.5-19(11)34(21)3.8(2.4)6.9(4.3)26(15)181(102)0.063317(14)1.5
132444(36)28(20)52(37)4.6(3.3)8.3(5.9)36(22)251(148)0.0717(14)
1631503.5+0.018
0
251936.211.1563860.153.5+0.024
+0.012
3.50
-0.030
181.75
20356342.52851548.515.3836110.244292
25427119334815.427.717312480.2933
3047802.527249018.533.321215810.3742
[ ! ]Dimensions in ( ) are for SUS440C Equivalent. [ ! ]Allowable static moment M01 is a value measured when a single nut is used, and M02 is a value measured when two nuts are used.

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
BASKFS6-[60-200/1]
BASKFS6G-[60-200/1]
BASKFS6L-[60-200/1]
BASKFS8-[60-200/1]
BASKFS8G-[60-200/1]
BASKFS8L-[60-200/1]
BASKFS10-[60-400/1]
BASKFS10G-[60-400/1]
BASKFS10L-[60-400/1]
BASKFS13-[60-400/1]
BASKFS13G-[60-400/1]
BASKFS13L-[60-400/1]
BASKFS16-[70-400/1]
BASKFS16G-[60-400/1]
BASKFS16L-[60-400/1]
BASKSS6-[60-200/1]
BASKSS6G-[60-200/1]
BASKSS6L-[60-200/1]
BASKSS8-[60-200/1]
BASKSS8G-[60-200/1]
BASKSS8L-[60-200/1]
BASKSS10-[60-400/1]
BASKSS10G-[60-400/1]
BASKSS10L-[60-400/1]
BASKSS13-[60-400/1]
BASKSS13G-[60-400/1]
BASKSS13L-[60-400/1]
BASKSS16-[70-350/1]
BASKSS16G-[70-400/1]
BASKSS16L-[70-400/1]
BESKFS6-[150,​200]
BESKFS6G-[150,​200]
BESKFS6L-[150,​200]
BESKFS8-[150,​200]
BESKFS8G-[150,​200]
BESKFS8L-[150,​200]
BESKFS10-[200,​300,​400]
BESKFS10G-[200,​300,​400]
BESKFS10L-[200,​300,​400]
BESKFS13-[200,​300,​400]
BESKFS13G-[200,​300,​400]
BESKFS13L-[200,​300,​400]
BESKFS16-[200,​300,​400]
BESKFS16G-[200,​300,​400]
BESKFS16L-[200,​300,​400]
BESKSS6-[150,​200]
BESKSS6G-[150,​200]
BESKSS6L-[150,​200]
BESKSS8-[150,​200]
BESKSS8G-[150,​200]
BESKSS8L-[150,​200]
BESKSS10-[200,​300,​400]
BESKSS10G-[200,​300,​400]
BESKSS10L-[200,​300,​400]
BESKSS13-[200,​300,​400]
BESKSS13G-[200,​300,​400]
BESKSS13L-[200,​300,​400]
BESKSS16-[200,​300,​400]
BESKSS16G-[200,​300,​400]
BESKSS16L-[200,​300,​400]
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSNut Type Shaft Outer Dia. D
(Ø)
Nut Overall Length
(mm)
Nut O.D.
(Ø)
Shaft material Number of Nuts
(pc(s).)
Shaft Overall Length L
(mm)
Basic Load Rating: Dynamic Load
(N)
Allowable Torque
(N•m)
Nut Material L Dimension Type Grease
1 Piece(s) 12 Day(s) or more 10[Flanged Type] Round Flange62514SUS440C Equivalent160 ~ 20012003.8SUS440C EquivalentL Dimension Configurable TypeStandard (S2)
1 Piece(s) 14 Day(s) or more 10[Flanged Type] Round Flange62514SUS440C Equivalent160 ~ 20012003.8SUS440C EquivalentL Dimension Configurable TypeLG2
1 Piece(s) 14 Day(s) or more 10[Flanged Type] Round Flange62514SUS440C Equivalent160 ~ 20012003.8SUS440C EquivalentL Dimension Configurable TypeET-100K
1 Piece(s) 12 Day(s) or more 10[Flanged Type] Round Flange82516SUS440C Equivalent160 ~ 20012004.8SUS440C EquivalentL Dimension Configurable TypeStandard (S2)
1 Piece(s) 14 Day(s) or more 10[Flanged Type] Round Flange82516SUS440C Equivalent160 ~ 20012004.8SUS440C EquivalentL Dimension Configurable TypeLG2
1 Piece(s) 14 Day(s) or more 10[Flanged Type] Round Flange82516SUS440C Equivalent160 ~ 20012004.8SUS440C EquivalentL Dimension Configurable TypeET-100K
1 Piece(s) 12 Day(s) or more 10[Flanged Type] Round Flange10.43321SUS440C Equivalent160 ~ 400240011SUS440C EquivalentL Dimension Configurable TypeStandard (S2)
1 Piece(s) 14 Day(s) or more 10[Flanged Type] Round Flange10.43321SUS440C Equivalent160 ~ 400240011SUS440C EquivalentL Dimension Configurable TypeLG2
1 Piece(s) 14 Day(s) or more 10[Flanged Type] Round Flange10.43321SUS440C Equivalent160 ~ 400240011SUS440C EquivalentL Dimension Configurable TypeET-100K
1 Piece(s) 12 Day(s) or more 10[Flanged Type] Round Flange13.43624SUS440C Equivalent160 ~ 400330020SUS440C EquivalentL Dimension Configurable TypeStandard (S2)
1 Piece(s) 14 Day(s) or more 10[Flanged Type] Round Flange13.43624SUS440C Equivalent160 ~ 400330020SUS440C EquivalentL Dimension Configurable TypeLG2
1 Piece(s) 14 Day(s) or more 10[Flanged Type] Round Flange13.43624SUS440C Equivalent160 ~ 400330020SUS440C EquivalentL Dimension Configurable TypeET-100K
1 Piece(s) 12 Day(s) or more 10[Flanged Type] Round Flange16.65031SUS440C Equivalent170 ~ 400620051SUS440C EquivalentL Dimension Configurable TypeStandard (S2)
1 Piece(s) 14 Day(s) or more 10[Flanged Type] Round Flange16.65031SUS440C Equivalent160 ~ 400620051SUS440C EquivalentL Dimension Configurable TypeLG2
1 Piece(s) 14 Day(s) or more 10[Flanged Type] Round Flange16.65031SUS440C Equivalent160 ~ 400620051SUS440C EquivalentL Dimension Configurable TypeET-100K
1 Piece(s) 12 Day(s) or more 10Straight62514SUS440C Equivalent160 ~ 20012003.8SUS440C EquivalentL Dimension Configurable TypeStandard (S2)
1 Piece(s) 14 Day(s) or more 10Straight62514SUS440C Equivalent160 ~ 20012003.8SUS440C EquivalentL Dimension Configurable TypeLG2
1 Piece(s) 14 Day(s) or more 10Straight62514SUS440C Equivalent160 ~ 20012003.8SUS440C EquivalentL Dimension Configurable TypeET-100K
1 Piece(s) 12 Day(s) or more 10Straight82516SUS440C Equivalent160 ~ 20012004.8SUS440C EquivalentL Dimension Configurable TypeStandard (S2)
1 Piece(s) 14 Day(s) or more 10Straight82516SUS440C Equivalent160 ~ 20012004.8SUS440C EquivalentL Dimension Configurable TypeLG2
1 Piece(s) 14 Day(s) or more 10Straight82516SUS440C Equivalent160 ~ 20012004.8SUS440C EquivalentL Dimension Configurable TypeET-100K
1 Piece(s) 12 Day(s) or more 10Straight10.43321SUS440C Equivalent160 ~ 400240011SUS440C EquivalentL Dimension Configurable TypeStandard (S2)
1 Piece(s) 14 Day(s) or more 10Straight10.43321SUS440C Equivalent160 ~ 400240011SUS440C EquivalentL Dimension Configurable TypeLG2
1 Piece(s) 14 Day(s) or more 10Straight10.43321SUS440C Equivalent160 ~ 400240011SUS440C EquivalentL Dimension Configurable TypeET-100K
1 Piece(s) 12 Day(s) or more 10Straight13.43624SUS440C Equivalent160 ~ 400330020SUS440C EquivalentL Dimension Configurable TypeStandard (S2)
1 Piece(s) 14 Day(s) or more 10Straight13.43624SUS440C Equivalent160 ~ 400330020SUS440C EquivalentL Dimension Configurable TypeLG2
1 Piece(s) 14 Day(s) or more 10Straight13.43624SUS440C Equivalent160 ~ 400330020SUS440C EquivalentL Dimension Configurable TypeET-100K
1 Piece(s) 12 Day(s) or more 10Straight16.65031SUS440C Equivalent170 ~ 350620051SUS440C EquivalentL Dimension Configurable TypeStandard (S2)
1 Piece(s) 14 Day(s) or more 10Straight16.65031SUS440C Equivalent170 ~ 400620051SUS440C EquivalentL Dimension Configurable TypeLG2
1 Piece(s) 14 Day(s) or more 10Straight16.65031SUS440C Equivalent170 ~ 400620051SUS440C EquivalentL Dimension Configurable TypeET-100K
1 Piece(s) 12 Day(s) or more 10[Flanged Type] Round Flange62514SUS440C Equivalent1150 ~ 20012003.8SUS440C EquivalentL Dimension Selectable TypeStandard (S2)
1 Piece(s) 14 Day(s) or more 10[Flanged Type] Round Flange62514SUS440C Equivalent1150 ~ 20012003.8SUS440C EquivalentL Dimension Selectable TypeLG2
1 Piece(s) 14 Day(s) or more 10[Flanged Type] Round Flange62514SUS440C Equivalent1150 ~ 20012003.8SUS440C EquivalentL Dimension Selectable TypeET-100K
1 Piece(s) 12 Day(s) or more 10[Flanged Type] Round Flange82516SUS440C Equivalent1150 ~ 20012004.8SUS440C EquivalentL Dimension Selectable TypeStandard (S2)
1 Piece(s) 14 Day(s) or more 10[Flanged Type] Round Flange82516SUS440C Equivalent1150 ~ 20012004.8SUS440C EquivalentL Dimension Selectable TypeLG2
1 Piece(s) 14 Day(s) or more 10[Flanged Type] Round Flange82516SUS440C Equivalent1150 ~ 20012004.8SUS440C EquivalentL Dimension Selectable TypeET-100K
1 Piece(s) 12 Day(s) or more 10[Flanged Type] Round Flange10.43321SUS440C Equivalent1200 ~ 400240011SUS440C EquivalentL Dimension Selectable TypeStandard (S2)
1 Piece(s) 14 Day(s) or more 10[Flanged Type] Round Flange10.43321SUS440C Equivalent1200 ~ 400240011SUS440C EquivalentL Dimension Selectable TypeLG2
1 Piece(s) 14 Day(s) or more 10[Flanged Type] Round Flange10.43321SUS440C Equivalent1200 ~ 400240011SUS440C EquivalentL Dimension Selectable TypeET-100K
1 Piece(s) 12 Day(s) or more 10[Flanged Type] Round Flange13.43624SUS440C Equivalent1200 ~ 400330020SUS440C EquivalentL Dimension Selectable TypeStandard (S2)
1 Piece(s) 14 Day(s) or more 10[Flanged Type] Round Flange13.43624SUS440C Equivalent1200 ~ 400330020SUS440C EquivalentL Dimension Selectable TypeLG2
1 Piece(s) 14 Day(s) or more 10[Flanged Type] Round Flange13.43624SUS440C Equivalent1200 ~ 400330020SUS440C EquivalentL Dimension Selectable TypeET-100K
1 Piece(s) 12 Day(s) or more 10[Flanged Type] Round Flange16.65031SUS440C Equivalent1200 ~ 400620051SUS440C EquivalentL Dimension Selectable TypeStandard (S2)
1 Piece(s) 14 Day(s) or more 10[Flanged Type] Round Flange16.65031SUS440C Equivalent1200 ~ 400620051SUS440C EquivalentL Dimension Selectable TypeLG2
1 Piece(s) 14 Day(s) or more 10[Flanged Type] Round Flange16.65031SUS440C Equivalent1200 ~ 400620051SUS440C EquivalentL Dimension Selectable TypeET-100K
1 Piece(s) 12 Day(s) or more 10Straight62514SUS440C Equivalent1150 ~ 20012003.8SUS440C EquivalentL Dimension Selectable TypeStandard (S2)
1 Piece(s) 14 Day(s) or more 10Straight62514SUS440C Equivalent1150 ~ 20012003.8SUS440C EquivalentL Dimension Selectable TypeLG2
1 Piece(s) 14 Day(s) or more 10Straight62514SUS440C Equivalent1150 ~ 20012003.8SUS440C EquivalentL Dimension Selectable TypeET-100K
1 Piece(s) 12 Day(s) or more 10Straight82516SUS440C Equivalent1150 ~ 20012004.8SUS440C EquivalentL Dimension Selectable TypeStandard (S2)
1 Piece(s) 14 Day(s) or more 10Straight82516SUS440C Equivalent1150 ~ 20012004.8SUS440C EquivalentL Dimension Selectable TypeLG2
1 Piece(s) 14 Day(s) or more 10Straight82516SUS440C Equivalent1150 ~ 20012004.8SUS440C EquivalentL Dimension Selectable TypeET-100K
1 Piece(s) 12 Day(s) or more 10Straight10.43321SUS440C Equivalent1200 ~ 400240011SUS440C EquivalentL Dimension Selectable TypeStandard (S2)
1 Piece(s) 14 Day(s) or more 10Straight10.43321SUS440C Equivalent1200 ~ 400240011SUS440C EquivalentL Dimension Selectable TypeLG2
1 Piece(s) 14 Day(s) or more 10Straight10.43321SUS440C Equivalent1200 ~ 400240011SUS440C EquivalentL Dimension Selectable TypeET-100K
1 Piece(s) 12 Day(s) or more 10Straight13.43624SUS440C Equivalent1200 ~ 400330020SUS440C EquivalentL Dimension Selectable TypeStandard (S2)
1 Piece(s) 14 Day(s) or more 10Straight13.43624SUS440C Equivalent1200 ~ 400330020SUS440C EquivalentL Dimension Selectable TypeLG2
1 Piece(s) 14 Day(s) or more 10Straight13.43624SUS440C Equivalent1200 ~ 400330020SUS440C EquivalentL Dimension Selectable TypeET-100K
1 Piece(s) 12 Day(s) or more 10Straight16.65031SUS440C Equivalent1200 ~ 400620051SUS440C EquivalentL Dimension Selectable TypeStandard (S2)
1 Piece(s) 14 Day(s) or more 10Straight16.65031SUS440C Equivalent1200 ~ 400620051SUS440C EquivalentL Dimension Selectable TypeLG2
1 Piece(s) 14 Day(s) or more 10Straight16.65031SUS440C Equivalent1200 ~ 400620051SUS440C EquivalentL Dimension Selectable TypeET-100K

Loading...

More Information

 

Basic Information

Type Solid Shaft Nut Length Standard Preload Standard
Accuracy Grade Standard Grade End Shape (Left) Standard End Shape (Right) Standard
Torque Middle Torque Ball Recirculating Type Single

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)