(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Ball Splines - Both Ends Stepped and Threaded

Ball Splines - Both Ends Stepped and Threaded

Click this image to zoom it.

Move the mouse over the image to zoom

A ball spline with stepped male threads on both ends. This standard enables highly accurate linear motion and rotational torque transmission. In addition, the contact area between the ball groove machined into the shaft and the steel ball is large, resulting in a large load capacity and long life. Even a single axis can be used as a linear motion guide, allowing for a compact design.
A dustproof seal is attached to the nut, so the ball will not fall off even if the spline shaft is removed.

(i)Caution

  • Please check the content on our website as the PDF does not contain the most up-to-date information.
 
Both Ends Stepped and ThreadedSpline Shafts[ M ]SUJ2 Equivalent Nut
[ M ]SCM415 Equivalent[ H ]Hardness: 58HRC ~
Spline Shaft, Nut[ M ]Material: SUS440C Equivalent[ H ]Hardness: 55HRC ~
Nut 1 pc.Nut 1 pc.
With Round Flange NutBSYMBSYMS
With Compact Flange NutBSYN-
With Straight NutBSYSBSYSS

Specifications

Part Number-L-F-E-B-S-P-Q-M-N
BSYS8
BSYS8G
BSYS8L
-
-
-
250
250
250
-
-
-
F20
F20

F20
-
-
-
E20
E20
E20
-
-
-
B8
B8
B8
-
-
-
S8
S8
S8
-
-
-
P6
P6
P6
-
-
-
Q6
Q6
Q6
-
-
-
M6
M6
M6
-
-
-
N6
N6
N6
Alternative grease types available. For Days to Ship, Price and Performance, see >> P.340
■Spline Shafts
Part Number1mm IncrementP, Q
Selection
M (Coarse) / N (Coarse) Selection
(M≤P, N≤Q)
D(Y)Mass (kg/m)
TypeNo.LF, EB, S1-Nut Type
1-Nut Typemin~max
BSYM
BS
YN
BSYS
BSYMS
BSYSS
*660~400(190)When P, Q=3
4≤F, E≤9
When P, Q=4
4≤F, E≤16
When P, Q≥5
4≤F, E≤P, Qx5
[ ! ]F, E≥B, S+2
When M, N=3
2≤B, S≤M, Nx3
When M, N=4
2≤B, S≤M, Nx4
When M, N≥5
2≤B, S≤M, Nx5
[ ! ]B S≥Pitchx3+
[ ! ]For SUS materials,M, N≤B, S≤M, Nx3
345         345       652~392(182)0.23
*860~400(190) 456         456      852~392(182)0.39
*1060~600(390) 4568        4568     10.452~592(382)0.65
*1360~600(390)  56810        56810    13.452~592(382)1.11
*1670~600(390)  568101213       681012   16.662~592(382)1.65
2080~700    81012131516     68101216  20.672~6922.57
2590~900    8101213151620    6810121620 25.882~8924.04
30100~1150     10121315162025    8101216202430.892~11425.85
[ ! ]For BSYMS and BSYSS, only * marked sizes are available, and the Max. L and Y dimensions are in ( ).
[ ! ]For BSYN, only No. 6, 8 and 10 are available.
■Round Flange Nuts, Compact Flange Nuts
No.D
(h6)
LDfHP.C.D.d1d2hWdBBasic Rated TorqueBasic Load RatingAllowable Static MomentMass
(kg)
Dynamic Ct
(N • m)
Static C0t
(N • m)
Dynamic C
(kN)
Static C0
(kN)
M01
(N • m)
M02
(N • m)
61425306223.563.16.51.5183.871.22.15360.03
8163224214.88.71.22.15360.04
102140(33)42(41)6(8)32(30)4.584.4(5.3)14(8.5)2519(11)34(21)3.8(2.4)6.9(4.3)26(15)181(102)0.09
132444(36)44(45)7(8)33(34)15(10)-28(20)52(37)4.6(3.3)8.3(5.9)36(22)251(148)0.11
163150517404.41851936.211.1563860.2
203563589455.59.55.422.52851548.515.3836110.3
254271655226.519334815.427.717312480.4
3047807510606.6116.5302.527249018.533.321215810.57
[ ! ]Dimensions in ( ) are for SUS440C Equivalent. [ ! ]Allowable static moment M01 is a value measured when a single nut is used, and M02 is a value measured when two nuts are used.
■Straight Nuts
No.D
(h6)
Lb t
(+0.05(
0
dαBasic Rated TorqueBasic Load RatingAllowable Static MomentMass
(kg)
Dimensions of Key (Included)
ToleranceDynamic Ct
(N • m)
Static C0t
(N • m)
Dynamic C
(kN)
Static C0
(kN)
M01
(N • m)
M02
(N • m)
B h L1R
ToleranceTolerance
614252.5+0.014
0
1.21.515°3.871.22.15360.0122.5+0.016
+0.006
2.50
-0.025
10.51.25
81625°4.88.71.22.15360.01310.5
102140(33)31.5-19(11)34(21)3.8(2.4)6.9(4.3)26(15)181(102)0.063317(14)1.5
132444(36)28(20)52(37)4.6(3.3)8.3(5.9)36(22)251(148)0.0717(14)
1631503.5+0.018
0
251936.211.1563860.153.5+0.024
+0.012
3.50
-0.030
181.75
20356342.52851548.515.3836110.244292
25427119334815.427.717312480.2933
3047802.527249018.533.321215810.3742
[ ! ]Dimensions in ( ) are for SUS440C Equivalent. [ ! ]Allowable static moment M01 is a value measured when a single nut is used, and M02 is a value measured when two nuts are used.

Alterations

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
BSYM6-[60-400/1]-F[4-25/1]-E[4-25/1]-B[2-25/1]-S[2-25/1]-P[3,​4,​5]-Q[3,​4,​5]-M[3,​4,​5]-N[3,​4,​5]
BSYM6G-[60-400/1]-F[4-9/1]-E[4-9/1]-B[2-25/1]-S[2-25/1]-P[3,​4,​5]-Q[3,​4,​5]-M[3,​4,​5]-N[3,​4,​5]
BSYM6L-[60-400/1]-F[4-9/1]-E[4-9/1]-B[2-25/1]-S[2-25/1]-P[3,​4,​5]-Q[3,​4,​5]-M[3,​4,​5]-N[3,​4,​5]
BSYM8-[60-400/1]-F[4-30/1]-E[4-30/1]-B[2-30/1]-S[2-30/1]-P[4,​5,​6]-Q[4,​5,​6]-M[4,​5,​6]-N[4,​5,​6]
BSYM8G-[60-400/1]-F[4-30/1]-E[4-30/1]-B[2-30/1]-S[2-30/1]-P[4,​5,​6]-Q[5,​6]-M[4,​5,​6]-N[4,​5,​6]
BSYM8L-[60-400/1]-F[4-30/1]-E[4-30/1]-B[2-30/1]-S[2-30/1]-P[4,​5,​6]-Q[5,​6]-M[4,​5,​6]-N[4,​5,​6]
BSYM10-[60-600/1]-F[4-40/1]-E[4-40/1]-B[2-40/1]-S[2-40/1]-P[4,​5,​6,​8]-Q[5,​6,​8]-M[4,​5,​6,​8]-N[4,​5,​6,​8]
BSYM10G-[60-600/1]-F[4-40/1]-E[4-40/1]-B[2-40/1]-S[2-40/1]-P[4,​5,​6,​8]-Q[5,​6,​8]-M[4,​5,​6,​8]-N[4,​5,​6,​8]
BSYM10L-[60-600/1]-F[4-40/1]-E[4-40/1]-B[2-40/1]-S[2-40/1]-P[4,​5,​6,​8]-Q[5,​6,​8]-M[4,​5,​6,​8]-N[4,​5,​6,​8]
BSYM13-[60-600/1]-F[4-50/1]-E[4-50/1]-B[2-50/1]-S[2-50/1]-P[5,​6,​8,​10]-Q[5,​6,​8,​10]-M[5,​6,​8,​10]-N[5,​6,​8,​10]
BSYM13G-[60-600/1]-F[4-50/1]-E[4-50/1]-B[2-50/1]-S[2-50/1]-P[5,​6,​8,​10]-Q[5,​6,​8,​10]-M[5,​6,​8,​10]-N[5,​6,​8,​10]
BSYM13L-[60-600/1]-F[4-50/1]-E[4-50/1]-B[2-50/1]-S[2-50/1]-P[5,​6,​8,​10]-Q[5,​6,​8,​10]-M[5,​6,​8,​10]-N[5,​6,​8,​10]
BSYM16-[70-600/1]-F[4-65/1]-E[4-65/1]-B[2-60/1]-S[2-60/1]-P[5,​6,​8,​10,​12,​13]-Q[5,​6,​8,​10,​12,​13]-M[6,​8,​10,​12]-N[6,​8,​10,​12]
BSYM16G-[70-600/1]-F[4-65/1]-E[4-65/1]-B[2-60/1]-S[2-60/1]-P[5,​6,​8,​10,​12,​13]-Q[5,​6,​8,​10,​12,​13]-M[6,​8,​10,​12]-N[6,​8,​10,​12]
BSYM16L-[70-600/1]-F[4-65/1]-E[4-65/1]-B[2-60/1]-S[2-60/1]-P[5,​6,​8,​10,​12,​13]-Q[5,​6,​8,​10,​12,​13]-M[6,​8,​10,​12]-N[6,​8,​10,​12]
BSYM20-[80-700/1]-F[4-80/1]-E[4-80/1]-B[2-90/1]-S[2-90/1]-P[8,​10,​12,​13,​15,​16]-Q[8,​10,​12,​13,​15,​16]-M[6,​8,​10,​12,​16]-N[6,​8,​10,​12,​16]
BSYM20G-[80-700/1]-F[4-80/1]-E[4-80/1]-B[2-90/1]-S[2-90/1]-P[8,​10,​12,​13,​15,​16]-Q[8,​10,​12,​13,​15,​16]-M[6,​8,​10,​12,​16]-N[6,​8,​10,​12,​16]
BSYM20L-[80-700/1]-F[4-80/1]-E[4-80/1]-B[2-90/1]-S[2-90/1]-P[8,​10,​12,​13,​15,​16]-Q[8,​10,​12,​13,​15,​16]-M[6,​8,​10,​12,​16]-N[6,​8,​10,​12,​16]
BSYM25-[90-900/1]-F[4-100/1]-E[4-100/1]-B[2-100/1]-S[2-100/1]-P[8,​10,​12,​13,​15,​16,​20]-Q[8,​10,​12,​13,​15,​16,​20]-M[6,​8,​10,​12,​16,​20]-N[6,​8,​10,​12,​16,​20]
BSYM25G-[90-900/1]-F[4-100/1]-E[4-100/1]-B[2-100/1]-S[2-100/1]-P[8,​10,​12,​13,​15,​16,​20]-Q[8,​10,​12,​13,​15,​16,​20]-M[6,​8,​10,​12,​16,​20]-N[6,​8,​10,​12,​16,​20]
BSYM25L-[90-900/1]-F[4-100/1]-E[4-100/1]-B[2-100/1]-S[2-100/1]-P[8,​10,​12,​13,​15,​16,​20]-Q[8,​10,​12,​13,​15,​16,​20]-M[6,​8,​10,​12,​16,​20]-N[6,​8,​10,​12,​16,​20]
BSYM30-[100-1300/1]-F[4-125/1]-E[4-125/1]-B[2-120/1]-S[2-120/1]-P[10,​12,​13,​15,​16,​20,​25]-Q[10,​12,​13,​15,​16,​20,​25]-M[8,​10,​12,​16,​20,​24]-N[8,​10,​12,​16,​20,​24]
BSYM30G-[100-1150/1]-F[4-125/1]-E[4-125/1]-B[2-120/1]-S[2-120/1]-P[10,​12,​13,​15,​16,​20,​25]-Q[10,​12,​13,​15,​16,​20,​25]-M[8,​10,​12,​16,​20,​24]-N[8,​10,​12,​16,​20,​24]
BSYM30L-[100-1150/1]-F[4-125/1]-E[4-125/1]-B[2-120/1]-S[2-120/1]-P[10,​12,​13,​15,​16,​20,​25]-Q[10,​12,​13,​15,​16,​20,​25]-M[8,​10,​12,​16,​20,​24]-N[8,​10,​12,​16,​20,​24]
BSYMS6-[60-190/1]-F[4-9/1]-E[4-9/1]-B[3-15/1]-S[3-25/1]-P[3,​4,​5]-Q[3,​4,​5]-M[3,​4,​5]-N[3,​4,​5]
BSYMS6G-[60-190/1]-F[4-9/1]-E[4-9/1]-B[3-15/1]-S[3-25/1]-P[3,​4,​5]-Q[3,​4,​5]-M[3,​4,​5]-N[3,​4,​5]
BSYMS6L-[60-190/1]-F[4-9/1]-E[4-9/1]-B[3-15/1]-S[3-25/1]-P[3,​4,​5]-Q[3,​4,​5]-M[3,​4,​5]-N[3,​4,​5]
BSYMS8-[60-190/1]-F[4-30/1]-E[4-30/1]-B[4-18/1]-S[4-30/1]-P[4,​5,​6]-Q[4,​5,​6]-M[4,​5,​6]-N[4,​5,​6]
BSYMS8G-[60-190/1]-F[4-30/1]-E[4-30/1]-B[4-18/1]-S[4-30/1]-P[4,​5,​6]-Q[4,​5,​6]-M[4,​5,​6]-N[4,​5,​6]
BSYMS8L-[60-190/1]-F[4-30/1]-E[4-30/1]-B[4-18/1]-S[4-30/1]-P[4,​5,​6]-Q[4,​5,​6]-M[4,​5,​6]-N[4,​5,​6]
BSYMS10-[60-390/1]-F[4-40/1]-E[4-40/1]-B[4-24/1]-S[4-40/1]-P[4,​5,​6,​8]-Q[5,​6,​8]-M[4,​5,​6,​8]-N[4,​5,​6,​8]
BSYMS10G-[60-390/1]-F[4-40/1]-E[4-40/1]-B[4-24/1]-S[4-40/1]-P[4,​5,​6,​8]-Q[5,​6,​8]-M[4,​5,​6,​8]-N[4,​5,​6,​8]
BSYMS10L-[60-390/1]-F[4-40/1]-E[4-40/1]-B[4-24/1]-S[4-40/1]-P[4,​5,​6,​8]-Q[5,​6,​8]-M[4,​5,​6,​8]-N[4,​5,​6,​8]
BSYMS13-[60-390/1]-F[4-50/1]-E[4-50/1]-B[5-30/1]-S[5-50/1]-P[5,​6,​8,​10]-Q[5,​6,​8,​10]-M[5,​6,​8,​10]-N[5,​6,​8,​10]
BSYMS13G-[60-390/1]-F[4-50/1]-E[4-50/1]-B[5-30/1]-S[5-50/1]-P[5,​6,​8,​10]-Q[5,​6,​8,​10]-M[5,​6,​8,​10]-N[5,​6,​8,​10]
BSYMS13L-[60-390/1]-F[4-50/1]-E[4-50/1]-B[5-30/1]-S[5-50/1]-P[5,​6,​8,​10]-Q[5,​6,​8,​10]-M[5,​6,​8,​10]-N[5,​6,​8,​10]
BSYMS16-[70-390/1]-F[4-65/1]-E[4-65/1]-B[5-39/1]-S[5-60/1]-P[5,​6,​8,​10,​12,​13]-Q[5,​6,​8,​10,​12,​13]-M[6,​8,​10,​12]-N[6,​8,​10,​12]
BSYMS16G-[70-390/1]-F[4-65/1]-E[4-65/1]-B[5-39/1]-S[5-60/1]-P[5,​6,​8,​10,​12,​13]-Q[5,​6,​8,​10,​12,​13]-M[6,​8,​10,​12]-N[6,​8,​10,​12]
BSYMS16L-[70-390/1]-F[4-65/1]-E[4-65/1]-B[5-39/1]-S[5-60/1]-P[5,​6,​8,​10,​12,​13]-Q[5,​6,​8,​10,​12,​13]-M[6,​8,​10,​12]-N[6,​8,​10,​12]
BSYN6-[60-400/1]-F[4-30/1]-E[4-16/1]-B[2-25/1]-S[2-25/1]-P[3,​4,​5]-Q[3,​4,​5]-M[3,​4,​5]-N[3,​4,​5]
BSYN6G-[60-400/1]-F[4-9/1]-E[4-9/1]-B[2-25/1]-S[2-25/1]-P[3,​4,​5]-Q[3,​4,​5]-M[3,​4,​5]-N[3,​4,​5]
BSYN6L-[60-400/1]-F[4-9/1]-E[4-9/1]-B[2-25/1]-S[2-25/1]-P[3,​4,​5]-Q[3,​4,​5]-M[3,​4,​5]-N[3,​4,​5]
BSYN8-[60-400/1]-F[4-30/1]-E[4-30/1]-B[2-30/1]-S[2-30/1]-P[4,​5,​6]-Q[5,​6]-M[4,​5,​6]-N[4,​5,​6]
BSYN8G-[60-400/1]-F[4-30/1]-E[4-30/1]-B[2-30/1]-S[2-30/1]-P[4,​5,​6]-Q[5,​6]-M[4,​5,​6]-N[4,​5,​6]
BSYN8L-[60-400/1]-F[4-30/1]-E[4-30/1]-B[2-30/1]-S[2-30/1]-P[4,​5,​6]-Q[5,​6]-M[4,​5,​6]-N[4,​5,​6]
BSYN10-[60-600/1]-F[4-40/1]-E[4-40/1]-B[2-40/1]-S[2-40/1]-P[4,​5,​6,​8]-Q[5,​6,​8]-M[4,​5,​6,​8]-N[4,​5,​6,​8]
BSYN10G-[60-600/1]-F[4-40/1]-E[4-40/1]-B[2-40/1]-S[2-40/1]-P[4,​5,​6,​8]-Q[5,​6,​8]-M[4,​5,​6,​8]-N[4,​5,​6,​8]
BSYN10L-[60-600/1]-F[4-40/1]-E[4-40/1]-B[2-40/1]-S[2-40/1]-P[4,​5,​6,​8]-Q[5,​6,​8]-M[4,​5,​6,​8]-N[4,​5,​6,​8]
BSYS6-[60-400/1]-F[4-9/1]-E[4-25/1]-B[2-25/1]-S[2-25/1]-P[3,​4,​5]-Q[3,​4,​5]-M[3,​4,​5]-N[3,​4,​5]
BSYS6G-[60-400/1]-F[4-9/1]-E[4-9/1]-B[2-25/1]-S[2-25/1]-P[3,​4,​5]-Q[3,​4,​5]-M[3,​4,​5]-N[3,​4,​5]
BSYS6L-[60-400/1]-F[4-9/1]-E[4-9/1]-B[2-25/1]-S[2-25/1]-P[3,​4,​5]-Q[3,​4,​5]-M[3,​4,​5]-N[3,​4,​5]
BSYS8-[60-400/1]-F[4-30/1]-E[4-30/1]-B[2-30/1]-S[2-30/1]-P[4,​5,​6]-Q[5,​6]-M[4,​5,​6]-N[4,​5,​6]
BSYS8G-[60-400/1]-F[4-30/1]-E[4-30/1]-B[2-30/1]-S[2-30/1]-P[4,​5,​6]-Q[5,​6]-M[4,​5,​6]-N[4,​5,​6]
BSYS8L-[60-400/1]-F[4-30/1]-E[4-30/1]-B[2-30/1]-S[2-30/1]-P[4,​5,​6]-Q[5,​6]-M[4,​5,​6]-N[4,​5,​6]
BSYS10-[60-600/1]-F[4-40/1]-E[4-40/1]-B[2-40/1]-S[2-40/1]-P[4,​5,​6,​8]-Q[5,​6,​8]-M[4,​5,​6,​8]-N[4,​5,​6,​8]
BSYS10G-[60-600/1]-F[4-40/1]-E[4-40/1]-B[2-40/1]-S[2-40/1]-P[4,​5,​6,​8]-Q[5,​6,​8]-M[4,​5,​6,​8]-N[4,​5,​6,​8]
BSYS10L-[60-600/1]-F[4-40/1]-E[4-40/1]-B[2-40/1]-S[2-40/1]-P[4,​5,​6,​8]-Q[5,​6,​8]-M[4,​5,​6,​8]-N[4,​5,​6,​8]
BSYS13-[60-600/1]-F[4-50/1]-E[4-50/1]-B[2-50/1]-S[2-50/1]-P[5,​6,​8,​10]-Q[5,​6,​8,​10]-M[5,​6,​8,​10]-N[5,​6,​8,​10]
BSYS13G-[60-600/1]-F[4-50/1]-E[4-50/1]-B[2-50/1]-S[2-50/1]-P[5,​6,​8,​10]-Q[5,​6,​8,​10]-M[5,​6,​8,​10]-N[5,​6,​8,​10]
BSYS13L-[60-600/1]-F[4-50/1]-E[4-50/1]-B[2-50/1]-S[2-50/1]-P[5,​6,​8,​10]-Q[5,​6,​8,​10]-M[5,​6,​8,​10]-N[5,​6,​8,​10]
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSNut Type Shaft Outer Dia. D
(Ø)
Nut Overall Length
(mm)
Nut O.D.
(Ø)
Shaft material Shaft Overall Length L
(mm)
Basic Load Rating: Dynamic Load
(N)
Allowable Torque
(N•m)
Nut Material Grease B
(mm)
E
(mm)
F
(mm)
M
(mm)
N
(mm)
P
(mm)
Q
(mm)
S
(mm)
1 Piece(s) 13 Day(s) or more 10[Flanged Type] Round Flange62514SUJ2 Equivalent60 ~ 40012003.8SCM415 EquivalentStandard (S2)2 ~ 254 ~ 254 ~ 253 ~ 53 ~ 53 ~ 53 ~ 52 ~ 25
1 Piece(s) 15 Day(s) or more 10[Flanged Type] Round Flange62514SUJ2 Equivalent60 ~ 40012003.8SCM415 EquivalentLG22 ~ 254 ~ 94 ~ 93 ~ 53 ~ 53 ~ 53 ~ 52 ~ 25
1 Piece(s) 15 Day(s) or more 10[Flanged Type] Round Flange62514SUJ2 Equivalent60 ~ 40012003.8SCM415 EquivalentET-100K2 ~ 254 ~ 94 ~ 93 ~ 53 ~ 53 ~ 53 ~ 52 ~ 25
1 Piece(s) 13 Day(s) or more 10[Flanged Type] Round Flange82516SUJ2 Equivalent60 ~ 40012004.8SCM415 EquivalentStandard (S2)2 ~ 304 ~ 304 ~ 304 ~ 64 ~ 64 ~ 64 ~ 62 ~ 30
1 Piece(s) 15 Day(s) or more 10[Flanged Type] Round Flange82516SUJ2 Equivalent60 ~ 40012004.8SCM415 EquivalentLG22 ~ 304 ~ 304 ~ 304 ~ 64 ~ 64 ~ 65 ~ 62 ~ 30
1 Piece(s) 15 Day(s) or more 10[Flanged Type] Round Flange82516SUJ2 Equivalent60 ~ 40012004.8SCM415 EquivalentET-100K2 ~ 304 ~ 304 ~ 304 ~ 64 ~ 64 ~ 65 ~ 62 ~ 30
1 Piece(s) 13 Day(s) or more 10[Flanged Type] Round Flange10.44021SUJ2 Equivalent60 ~ 600380019SCM415 EquivalentStandard (S2)2 ~ 404 ~ 404 ~ 404 ~ 84 ~ 84 ~ 85 ~ 82 ~ 40
1 Piece(s) 15 Day(s) or more 10[Flanged Type] Round Flange10.44021SUJ2 Equivalent60 ~ 600380019SCM415 EquivalentLG22 ~ 404 ~ 404 ~ 404 ~ 84 ~ 84 ~ 85 ~ 82 ~ 40
1 Piece(s) 15 Day(s) or more 10[Flanged Type] Round Flange10.44021SUJ2 Equivalent60 ~ 600380019SCM415 EquivalentET-100K2 ~ 404 ~ 404 ~ 404 ~ 84 ~ 84 ~ 85 ~ 82 ~ 40
1 Piece(s) 13 Day(s) or more 10[Flanged Type] Round Flange13.44424SUJ2 Equivalent60 ~ 600460028SCM415 EquivalentStandard (S2)2 ~ 504 ~ 504 ~ 505 ~ 105 ~ 105 ~ 105 ~ 102 ~ 50
1 Piece(s) 15 Day(s) or more 10[Flanged Type] Round Flange13.44424SUJ2 Equivalent60 ~ 600460028SCM415 EquivalentLG22 ~ 504 ~ 504 ~ 505 ~ 105 ~ 105 ~ 105 ~ 102 ~ 50
1 Piece(s) 15 Day(s) or more 10[Flanged Type] Round Flange13.44424SUJ2 Equivalent60 ~ 600460028SCM415 EquivalentET-100K2 ~ 504 ~ 504 ~ 505 ~ 105 ~ 105 ~ 105 ~ 102 ~ 50
1 Piece(s) 13 Day(s) or more 10[Flanged Type] Round Flange16.65031SUJ2 Equivalent70 ~ 600620051SCM415 EquivalentStandard (S2)2 ~ 604 ~ 654 ~ 656 ~ 126 ~ 125 ~ 135 ~ 132 ~ 60
1 Piece(s) 15 Day(s) or more 10[Flanged Type] Round Flange16.65031SUJ2 Equivalent70 ~ 600620051SCM415 EquivalentLG22 ~ 604 ~ 654 ~ 656 ~ 126 ~ 125 ~ 135 ~ 132 ~ 60
1 Piece(s) 15 Day(s) or more 10[Flanged Type] Round Flange16.65031SUJ2 Equivalent70 ~ 600620051SCM415 EquivalentET-100K2 ~ 604 ~ 654 ~ 656 ~ 126 ~ 125 ~ 135 ~ 132 ~ 60
1 Piece(s) 13 Day(s) or more 10[Flanged Type] Round Flange20.66335SUJ2 Equivalent80 ~ 700850085SCM415 EquivalentStandard (S2)2 ~ 904 ~ 804 ~ 806 ~ 166 ~ 168 ~ 168 ~ 162 ~ 90
1 Piece(s) 15 Day(s) or more 10[Flanged Type] Round Flange20.66335SUJ2 Equivalent80 ~ 700850085SCM415 EquivalentLG22 ~ 904 ~ 804 ~ 806 ~ 166 ~ 168 ~ 168 ~ 162 ~ 90
1 Piece(s) 15 Day(s) or more 10[Flanged Type] Round Flange20.66335SUJ2 Equivalent80 ~ 700850085SCM415 EquivalentET-100K2 ~ 904 ~ 804 ~ 806 ~ 166 ~ 168 ~ 168 ~ 162 ~ 90
1 Piece(s) 13 Day(s) or more 10[Flanged Type] Round Flange25.87142SUJ2 Equivalent90 ~ 90015400193SCM415 EquivalentStandard (S2)2 ~ 1004 ~ 1004 ~ 1006 ~ 206 ~ 208 ~ 208 ~ 202 ~ 100
1 Piece(s) 15 Day(s) or more 10[Flanged Type] Round Flange25.87142SUJ2 Equivalent90 ~ 90015400193SCM415 EquivalentLG22 ~ 1004 ~ 1004 ~ 1006 ~ 206 ~ 208 ~ 208 ~ 202 ~ 100
1 Piece(s) 15 Day(s) or more 10[Flanged Type] Round Flange25.87142SUJ2 Equivalent90 ~ 90015400193SCM415 EquivalentET-100K2 ~ 1004 ~ 1004 ~ 1006 ~ 206 ~ 208 ~ 208 ~ 202 ~ 100
1 Piece(s) 13 Day(s) or more 10[Flanged Type] Round Flange30.88047SUJ2 Equivalent100 ~ 130018500272SCM415 EquivalentStandard (S2)2 ~ 1204 ~ 1254 ~ 1258 ~ 248 ~ 2410 ~ 2510 ~ 252 ~ 120
1 Piece(s) 15 Day(s) or more 10[Flanged Type] Round Flange30.88047SUJ2 Equivalent100 ~ 115018500272SCM415 EquivalentLG22 ~ 1204 ~ 1254 ~ 1258 ~ 248 ~ 2410 ~ 2510 ~ 252 ~ 120
1 Piece(s) 15 Day(s) or more 10[Flanged Type] Round Flange30.88047SUJ2 Equivalent100 ~ 115018500272SCM415 EquivalentET-100K2 ~ 1204 ~ 1254 ~ 1258 ~ 248 ~ 2410 ~ 2510 ~ 252 ~ 120
1 Piece(s) 12 Day(s) or more 10[Flanged Type] Round Flange62514SUS440C Equivalent60 ~ 19012003.8SUS440C EquivalentStandard (S2)3 ~ 154 ~ 94 ~ 93 ~ 53 ~ 53 ~ 53 ~ 53 ~ 25
1 Piece(s) 14 Day(s) or more 10[Flanged Type] Round Flange62514SUJ2 Equivalent60 ~ 19012003.8SCM415 EquivalentLG23 ~ 154 ~ 94 ~ 93 ~ 53 ~ 53 ~ 53 ~ 53 ~ 25
1 Piece(s) 14 Day(s) or more 10[Flanged Type] Round Flange62514SUS440C Equivalent60 ~ 19012003.8SUS440C EquivalentET-100K3 ~ 154 ~ 94 ~ 93 ~ 53 ~ 53 ~ 53 ~ 53 ~ 25
1 Piece(s) 12 Day(s) or more 10[Flanged Type] Round Flange82516SUS440C Equivalent60 ~ 19012004.8SUS440C EquivalentStandard (S2)4 ~ 184 ~ 304 ~ 304 ~ 64 ~ 64 ~ 64 ~ 64 ~ 30
1 Piece(s) 14 Day(s) or more 10[Flanged Type] Round Flange82516SUJ2 Equivalent60 ~ 19012004.8SCM415 EquivalentLG24 ~ 184 ~ 304 ~ 304 ~ 64 ~ 64 ~ 64 ~ 64 ~ 30
1 Piece(s) 14 Day(s) or more 10[Flanged Type] Round Flange82516SUS440C Equivalent60 ~ 19012004.8SUS440C EquivalentET-100K4 ~ 184 ~ 304 ~ 304 ~ 64 ~ 64 ~ 64 ~ 64 ~ 30
1 Piece(s) 12 Day(s) or more 10[Flanged Type] Round Flange10.43321SUS440C Equivalent60 ~ 390240011SUS440C EquivalentStandard (S2)4 ~ 244 ~ 404 ~ 404 ~ 84 ~ 84 ~ 85 ~ 84 ~ 40
1 Piece(s) 14 Day(s) or more 10[Flanged Type] Round Flange10.44021SUJ2 Equivalent60 ~ 390380019SCM415 EquivalentLG24 ~ 244 ~ 404 ~ 404 ~ 84 ~ 84 ~ 85 ~ 84 ~ 40
1 Piece(s) 14 Day(s) or more 10[Flanged Type] Round Flange10.43321SUS440C Equivalent60 ~ 390240011SUS440C EquivalentET-100K4 ~ 244 ~ 404 ~ 404 ~ 84 ~ 84 ~ 85 ~ 84 ~ 40
1 Piece(s) 12 Day(s) or more 10[Flanged Type] Round Flange13.43624SUS440C Equivalent60 ~ 390330020SUS440C EquivalentStandard (S2)5 ~ 304 ~ 504 ~ 505 ~ 105 ~ 105 ~ 105 ~ 105 ~ 50
1 Piece(s) 14 Day(s) or more 10[Flanged Type] Round Flange13.43624SUS440C Equivalent60 ~ 390330020SUS440C EquivalentLG25 ~ 304 ~ 504 ~ 505 ~ 105 ~ 105 ~ 105 ~ 105 ~ 50
1 Piece(s) 14 Day(s) or more 10[Flanged Type] Round Flange13.43624SUS440C Equivalent60 ~ 390330020SUS440C EquivalentET-100K5 ~ 304 ~ 504 ~ 505 ~ 105 ~ 105 ~ 105 ~ 105 ~ 50
1 Piece(s) 12 Day(s) or more 10[Flanged Type] Round Flange16.65031SUS440C Equivalent70 ~ 390620051SUS440C EquivalentStandard (S2)5 ~ 394 ~ 654 ~ 656 ~ 126 ~ 125 ~ 135 ~ 135 ~ 60
1 Piece(s) 14 Day(s) or more 10[Flanged Type] Round Flange16.65031SUJ2 Equivalent70 ~ 390620051SCM415 EquivalentLG25 ~ 394 ~ 654 ~ 656 ~ 126 ~ 125 ~ 135 ~ 135 ~ 60
1 Piece(s) 14 Day(s) or more 10[Flanged Type] Round Flange16.65031SUS440C Equivalent70 ~ 390620051SUS440C EquivalentET-100K5 ~ 394 ~ 654 ~ 656 ~ 126 ~ 125 ~ 135 ~ 135 ~ 60
1 Piece(s) 13 Day(s) or more 10[Flanged Type] Compact Flange62514SUJ2 Equivalent60 ~ 40012003.8SCM415 EquivalentStandard (S2)2 ~ 254 ~ 164 ~ 303 ~ 53 ~ 53 ~ 53 ~ 52 ~ 25
1 Piece(s) 15 Day(s) or more 10[Flanged Type] Compact Flange62514SUJ2 Equivalent60 ~ 40012003.8SCM415 EquivalentLG22 ~ 254 ~ 94 ~ 93 ~ 53 ~ 53 ~ 53 ~ 52 ~ 25
1 Piece(s) 15 Day(s) or more 10[Flanged Type] Compact Flange62514SUJ2 Equivalent60 ~ 40012003.8SCM415 EquivalentET-100K2 ~ 254 ~ 94 ~ 93 ~ 53 ~ 53 ~ 53 ~ 52 ~ 25
1 Piece(s) 13 Day(s) or more 10[Flanged Type] Compact Flange82516SUJ2 Equivalent60 ~ 40012004.8SCM415 EquivalentStandard (S2)2 ~ 304 ~ 304 ~ 304 ~ 64 ~ 64 ~ 65 ~ 62 ~ 30
1 Piece(s) 15 Day(s) or more 10[Flanged Type] Compact Flange82516SUJ2 Equivalent60 ~ 40012004.8SCM415 EquivalentLG22 ~ 304 ~ 304 ~ 304 ~ 64 ~ 64 ~ 65 ~ 62 ~ 30
1 Piece(s) 15 Day(s) or more 10[Flanged Type] Compact Flange82516SUJ2 Equivalent60 ~ 40012004.8SCM415 EquivalentET-100K2 ~ 304 ~ 304 ~ 304 ~ 64 ~ 64 ~ 65 ~ 62 ~ 30
1 Piece(s) 13 Day(s) or more 10[Flanged Type] Compact Flange10.44021SUJ2 Equivalent60 ~ 600380019SCM415 EquivalentStandard (S2)2 ~ 404 ~ 404 ~ 404 ~ 84 ~ 84 ~ 85 ~ 82 ~ 40
1 Piece(s) 15 Day(s) or more 10[Flanged Type] Compact Flange10.44021SUJ2 Equivalent60 ~ 600380019SCM415 EquivalentLG22 ~ 404 ~ 404 ~ 404 ~ 84 ~ 84 ~ 85 ~ 82 ~ 40
1 Piece(s) 15 Day(s) or more 10[Flanged Type] Compact Flange10.44021SUJ2 Equivalent60 ~ 600380019SCM415 EquivalentET-100K2 ~ 404 ~ 404 ~ 404 ~ 84 ~ 84 ~ 85 ~ 82 ~ 40
1 Piece(s) 13 Day(s) or more 10Straight62514SUJ2 Equivalent60 ~ 40012003.8SCM415 EquivalentStandard (S2)2 ~ 254 ~ 254 ~ 93 ~ 53 ~ 53 ~ 53 ~ 52 ~ 25
1 Piece(s) 15 Day(s) or more 10Straight62514SUJ2 Equivalent60 ~ 40012003.8SCM415 EquivalentLG22 ~ 254 ~ 94 ~ 93 ~ 53 ~ 53 ~ 53 ~ 52 ~ 25
1 Piece(s) 15 Day(s) or more 10Straight62514SUJ2 Equivalent60 ~ 40012003.8SCM415 EquivalentET-100K2 ~ 254 ~ 94 ~ 93 ~ 53 ~ 53 ~ 53 ~ 52 ~ 25
1 Piece(s) 13 Day(s) or more 10Straight82516SUJ2 Equivalent60 ~ 40012004.8SCM415 EquivalentStandard (S2)2 ~ 304 ~ 304 ~ 304 ~ 64 ~ 64 ~ 65 ~ 62 ~ 30
1 Piece(s) 15 Day(s) or more 10Straight82516SUJ2 Equivalent60 ~ 40012004.8SCM415 EquivalentLG22 ~ 304 ~ 304 ~ 304 ~ 64 ~ 64 ~ 65 ~ 62 ~ 30
1 Piece(s) 15 Day(s) or more 10Straight82516SUJ2 Equivalent60 ~ 40012004.8SCM415 EquivalentET-100K2 ~ 304 ~ 304 ~ 304 ~ 64 ~ 64 ~ 65 ~ 62 ~ 30
1 Piece(s) 13 Day(s) or more 10Straight10.44021SUJ2 Equivalent60 ~ 600380019SCM415 EquivalentStandard (S2)2 ~ 404 ~ 404 ~ 404 ~ 84 ~ 84 ~ 85 ~ 82 ~ 40
1 Piece(s) 15 Day(s) or more 10Straight10.44021SUJ2 Equivalent60 ~ 600380019SCM415 EquivalentLG22 ~ 404 ~ 404 ~ 404 ~ 84 ~ 84 ~ 85 ~ 82 ~ 40
1 Piece(s) 15 Day(s) or more 10Straight10.44021SUJ2 Equivalent60 ~ 600380019SCM415 EquivalentET-100K2 ~ 404 ~ 404 ~ 404 ~ 84 ~ 84 ~ 85 ~ 82 ~ 40
1 Piece(s) 13 Day(s) or more 10Straight13.44424SUJ2 Equivalent60 ~ 600460028SCM415 EquivalentStandard (S2)2 ~ 504 ~ 504 ~ 505 ~ 105 ~ 105 ~ 105 ~ 102 ~ 50
1 Piece(s) 15 Day(s) or more 10Straight13.44424SUJ2 Equivalent60 ~ 600460028SCM415 EquivalentLG22 ~ 504 ~ 504 ~ 505 ~ 105 ~ 105 ~ 105 ~ 102 ~ 50
1 Piece(s) 15 Day(s) or more 10Straight13.44424SUJ2 Equivalent60 ~ 600460028SCM415 EquivalentET-100K2 ~ 504 ~ 504 ~ 505 ~ 105 ~ 105 ~ 105 ~ 102 ~ 50

Loading...

More Information

 

Basic Information

Type Solid Shaft Nut Length Standard Preload Standard
Accuracy Grade Standard Grade End Shape (Left) Stepped and Threaded End Shape (Right) Stepped and Threaded
Torque Middle Torque Ball Recirculating Type Single

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)