(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Slit Couplings Long, Set Screw Type

Slit Couplings Long, Set Screw Type

Click this image to zoom it.

Move the mouse over the image to zoom

  • Volume Discount

Are economically priced with the quality/perforce kept to the same level as conventional products. Can serve as the substitute for CPL Type.

Coupling Product Overview

The parallel line coupling takes into account the shortening of slots without weakening the ability to bear and correct deviation. Short slots can enhance and overlap the torque rigidity of the coupling, so that it can bear considerable torque.
The parallel line coupling usually has 3 to 5 slots to deal with the problem of low torque rigidity.
The parallel line coupling takes into account the shortening of slots without weakening the ability to bear and correct deviation. Short slots can enhance and overlap the torque rigidity of the coupling, so that it can bear considerable torque.
 

Coupling Product Feature

【Features/Characteristics】The metal elastic coupling is integrally formed with zero rotary clearance. Elastic action compensates radial, angular and axial deviations. Clockwise and counterclockwise rotary characteristics are identical. Positioning screw fixing. Aluminum alloy material
【Usage】Suitable for standard motors
【Precautions】Moment of inertia and weight are calculated at the maximum shaft dia.
【Type】Grooved type
【Body Material】Aluminum alloy
【Fixing System】Set Screw fixing type
【Applicable Motors】Servo motors and stepping motors
■ Parallel line couplings are suitable for light load applications.

Dimensional Coupling Drawing

【Economic type】Grooved coupling Set screw type Length-increased type: Related image
 
TYPE[M]Material[ S ] Surface Treatment[ A ] Accessories
GSASLAluminumAlumite TreatmentSet Screw
 

Coupling Specification Table

Please order after selecting part number and parameters according to the selection steps to . 【Economic type】Grooved coupling Set screw type Length-increased type: Related image 【Economic type】Grooved coupling Set screw type Length-increased type: Related image
Part Number (【Economic type】Grooved coupling Set screw type Length-increased type: Related imageType· 【Economic type】Grooved coupling Set screw type Length-increased type: Related imageD)【Economic type】Grooved coupling Set screw type Length-increased type: Related imaged1【Economic type】Grooved coupling Set screw type Length-increased type: Related imaged2
GSASL2068
Part Number【Economic type】Grooved coupling Set screw type Length-increased type: Related imaged1【Economic type】Grooved coupling Set screw type Length-increased type: Related imaged2LSet ScrewF
【Economic type】Grooved coupling Set screw type Length-increased type: Related imageType【Economic type】Grooved coupling Set screw type Length-increased type: Related imageDM
(Coarse Thread)
Tightening torque
(N·m)
Set Screw
GSASL
8223           143.5M30.31.7
3 3           
123 345         18.52.5M2.50.55
4  45         
5   56        
164  456        236.4M30.73
5   56 8      
6    6 8      
205   56 8      267
6    66.35810     
6.35      8      
8      810     
10       10     
256    6 810     318M41.74
6.35      810     
8      810 12   
9.525       10     
10       10 12   
32              41116
8      8  12   
10       10111214  
12         1214  
                    
              

■Characteristic Value
Part NumberAllowable torque
(N·m)
Maximum rotational speed
(rpm)
Moment of inertia
(kg·m2)
Static torsional stiffness
(N·m/rad)
Allowable lateral misalignment
(mm)
Allowable Angular Misalignment
( ° )
Allowable axial amplitude
(mm)
Weight
(g)
TypeD
GSASL80.110,0001.2×10-8250.12±0.24.5
120.48.3×10-845±0.36
160.56.5×10-744±0.49
2011.5×10-611016
2524.2×10-62150.15±0.527
3241.6×10-542064
4083.2×10-57000.2134
[ ! ]Static torsional stiffness, moment of inertia and weight are the values at the maximum shaft dia..
 

Coupling Precautions

■ Calibration and adjustment
1. The coupling allows axis deviation, and transmits rotation angle and torque, but when the axis deviation exceeds the allowable value, vibration will occur or the service life will be drastically reduced.
Be sure to make calibration and adjustment.
2. Axis deviation includes lateral misalignment (parallel error of two axes), angular misalignment (angular error of two axes) and axial amplitude (axial movement of shaft).
Please calibrate and adjust the shaft to ensure that the axis deviation is below the allowable value recorded in the dimension and performance table of each product.
3. The allowable value of axis deviation recorded in the dimension and performance table refers to the situation when either lateral misalignment, angular misalignment or axial amplitude occurs alone. When more than two axis deviations occur at the same time, the corresponding allowable values are halved respectively.
4. Axis deviation not only occurs when assembling to the device, but also is caused by vibration, thermal expansion and bearing wear in operation. Therefore, it is recommended to set the axis deviation below 1/3 of the allowable value.
 

Example of Use coupling

Use example of coupling 1) motor × gear boxUse example of coupling 2) motor × ball screw
Use example of coupling 1: motor×gear boxUse example of coupling 2: motor×ball screw
  
Use example of coupling 3) motor × encoderUse example of coupling 4) motor × measuring tester
Use example of coupling 3: motor×encoderUse example of coupling 2 motor×measuring tester

Coupling Usage Method

■Mounting method
STEP1 Insert the coupling
Confirm that the clamping bolt has been unscrewed, and then remove the dust, foreign matter and oil from the shaft and coupling bore.
Then, when inserting the coupling into the shaft, please be careful not to put the disc under excessive stress such as compression or tension.
STEP2 Use fixture to adjust
Please use fixture to adjust and fix the concentricity of the left and right hubs of the coupling with high accuracy.
STEP3 Simple lateral misalignment and angular misalignment confirmation
Under the condition of unscrewed bolts, make the coupling slide axially and confirm its smooth movement.
Then, rotate the coupling to make sure it moves smoothly.
Lateral misalignment is not allowed for single disc type coupling, so carry out positioning securely.
Simple lateral misalignment confirmation   Simple angular misalignment confirmation
STEP4 Installation
Please adjust the shaft insertion amount according to the dimension ℓ in the product catalog, and use a torque wrench to tighten with the specified torque.
* If the specified torque cannot be reached once, please cross fasten the left and right clamps twice or three times.

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
GSASF32-8-8
GSASF32-8-12
GSASF32-10-12
GSASF32-10-14
GSASF32-12-12
GSASF32-12-14
GSASL8-3-3
GSASL12-3-3
GSASL12-3-4
GSASL12-3-5
GSASL12-4-4
GSASL12-4-5
GSASL12-5-5
GSASL12-5-6
GSASL16-4-4
GSASL16-4-5
GSASL16-5-5
GSASL16-5-8
GSASL16-6-6
GSASL20-5-5
GSASL20-5-6
GSASL20-5-8
GSASL20-6-6
GSASL20-6-6.35
GSASL20-6-8
GSASL20-6-10
GSASL20-6.35-8
GSASL20-8-10
GSASL25-6-8
GSASL25-6-10
GSASL25-6.35-8
GSASL25-6.35-10
GSASL25-8-8
GSASL25-8-10
GSASL25-8-12
GSASL25-10-10
GSASL25-10-12
GSASL32-10-10
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSShaft Bore Dia. 1 d1 (or d)
(Ø)
Shaft Bore Dia. 2 d2 (or d)
(Ø)
O.D.
(Ø)
Overall Length
(mm)
Allowable Torque Range
(N•m)
Allowable Torque
(N•m)
Allowable Lateral Misalignment
(mm)
Allowable Axial Misalignment
(mm)
Moment of Inertia
(kg・m2)
1 Piece(s)Available Same day -8832413.01~5.0040.150.51.6×10-5
1 Piece(s)Available 6 Day(s) -81232413.01~5.0040.150.51.6×10-5
1 Piece(s)Available Same day -101232413.01~5.0040.150.51.6 x 10-5
1 Piece(s)Available Same day -101432413.01~5.0040.150.51.6 x 10-5
1 Piece(s)Available Same day -121232413.01~5.0040.150.51.6 x 10-5
1 Piece(s)Available Same day -121432413.01~5.0040.150.51.6 x 10-5
1 Piece(s)Available 6 Day(s) -338140.05~1.000.10.10.21.2×10-8
1 Piece(s)Available 6 Day(s) -331218.50.05~1.000.40.10.38.3×10-8
1 Piece(s)Available 10 Day(s) -341218.50.05~1.000.40.10.38.3×10-8
1 Piece(s)Available 6 Day(s) -351218.50.05~1.000.40.10.38.3×10-8
1 Piece(s)Available Same day -441218.50.05~1.000.40.10.38.3×10-8
1 Piece(s)Available 6 Day(s) -451218.50.05~1.000.40.10.38.3×10-8
1 Piece(s)Available 6 Day(s) -551218.50.05~1.000.40.10.38.3×10-8
1 Piece(s)Available 6 Day(s) -561218.50.05~1.000.40.10.38.3×10-8
1 Piece(s)Available Same day -4416230.05~1.000.50.10.46.5 x 10-7
60 Piece(s)Available 10 Day(s) 104516230.05~1.000.50.10.46.5 x 10-7
1 Piece(s)Available Same day -5516230.05~1.000.50.10.46.5 x 10-7
1 Piece(s)Available Same day -5816230.05~1.000.50.10.46.5 x 10-7
1 Piece(s)Available Same day -6616230.05~1.000.50.10.46.5×10-7
1 Piece(s)Available 6 Day(s) -5520260.05~1.0010.10.41.5×10-6
1 Piece(s)Available Same day -5620260.05~1.0010.10.41.5 x 10-6
1 Piece(s)Available Same day -5820261.01~3.0010.10.41.5 x 10-6
1 Piece(s)Available Same day -6620260.05~1.0010.10.41.5 x 10-6
1 Piece(s)Available 6 Day(s) -66.3520260.05~1.0010.10.41.5×10-6
1 Piece(s)Available Same day -6820260.05~1.0010.10.41.5 x 10-6
1 Piece(s)Available Same day -61020260.05~1.0010.10.41.5 x 10-6
1 Piece(s)Available 6 Day(s) -6.35820260.05~1.0010.10.41.5×10-6
1 Piece(s)Available Same day -81020260.05~1.0010.10.41.5×10-6
1 Piece(s)Available Same day -6825311.01~3.0020.150.54.2×10-6
1 Piece(s)Available Same day -61025311.01~3.0020.150.54.2 x 10-6
1 Piece(s)Available Same day -6.35825311.01~3.0020.150.54.2 x 10-6
1 Piece(s)Available Same day -6.351025311.01~3.0020.150.54.2 x 10-6
1 Piece(s)Available Same day -8825311.01~3.0020.150.54.2 x 10-6
1 Piece(s)Available Same day -81025311.01~3.0020.150.54.2 x 10-6
1 Piece(s)Available Same day -81225310.05~1.0020.150.54.2 x 10-6
1 Piece(s)Available Same day -101025311.01~3.0020.150.54.2×10-6
1 Piece(s)Available Same day -101225311.01~3.0020.150.54.2×10-6
1 Piece(s)Available Same day -101032413.01~5.0040.150.51.6 x 10-5

Loading...

  1. 1
 

Basic Information

Series Name Slit Application For Servo Motors / Stepping Motor Features Zero Backlash / Low Moment of Inertia
Allowable Misalignment Angular Misalignment / Eccentricity / Axial Misalignment Max. Rotational Speed Range(r/min) 4001~10000 Body Material Aluminum Alloy
Allowable Angular Misalignment(deg) 2 Product Category Coupling Main Body Allowable Lateral Misalignment Range(mm) 0.02~0.2
Max. Rotational Speed(r/min) 10000 Disc Material Stainless Steel Standard/Short Standard Type
Shaft Bore Shape Standard Bore Shaft Tightening Method Set Screw

Frequently asked question (FAQ)

Question: What is a coupling?
Answer: A coupling is a part that connects two different rotating bodies (motor shaft, ball screw, etc.) and aims at transmitting torque. The load of assembly adjustment is reduced by absorbing the axis deviation (lateral misalignment, angular misalignment and axial amplitude) between rotating bodies. And in case of accidental overload, the coupling is destroyed and the rotating bodies are disconnected to protect the expensive power part and the whole device.
Question: What are the types of MISUMI couplings?
Answer: There are disc type, grooved type, cross type, claw type, bellows type, rigid type and universal joint type.
Question: How to select coupling according to motor?
Answer: Disc type is recommended for servo motors, grooved type is recommended for stepping motors, and cross type is recommended for universal motors.
Question: How to select according to the purpose, environment, working conditions?
Answer: Please refer to the MISUMI website.
Question: What kind of coupling should be used when the angular misalignment is very large?
Answer: Please select the universal joint with allowable angular misalignment of 30 degrees. In addition, when grease cannot be applied regularly, use a rubber sleeve to fill grease and use it.
Question: Which disc type coupling is better, single disc type or double disc type?
Answer: Double disc type can absorb angular misalignment and lateral misalignment, but the total length will increase.
Although the total length of the single disc type is short, it is only suitable for applications with narrow space because lateral misalignment is not allowed in the structure. Special attention should be paid to centering during use.
Question: How much is appropriate to insert the shaft into the coupling during installation?
Answer: Please select the length of the main body (coupling part) described in the product catalog. If the insertion amount is too short, the shaft may slip and the clamping part may be damaged; If the insertion amount is too long, it will be damaged due to shaft interference inside the coupling.
Question: Why is it necessary to install a protection cover around the coupling?
Answer: Due to high-speed rotation, accidental contact may result in injury or entanglement of gloves, towels, etc. In addition, for some reasons, parts may be damaged or debris may be scattered. Therefore, be sure to install the safety protection cover.
Question: What should I do if there is no matching shaft bore diameter?
Answer: Please select a product with changeable keyway width or available with keyway processing. MISUMI products are divided into MCSLCWK series (disc type), CPOC series (cross type) and MMJN series (claw type), etc.
Question: Is it a defective product that has difference in groove gap width?
Answer: Since the difference is within the dimensional tolerance range, there is no problem.

Check other FAQ (7 items) Hide

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)