(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 8:00 21/4/2024 sampai dengan 5:00 pada tanggal 22/4/2024. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 21/4/2024 to 5:00 (WIB) 22/4/2024. We apologize for the inconvenience.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here

Round Wire Coil Springs/Deflection 45%/I.D. Referenced

Round Wire Coil Springs/Deflection 45%/I.D. Referenced
  • Volume Discount

This is a standardized series so that the spring constant is constant for the same diameter.

(i)Caution

  • Please check the content on our website as the PDF does not contain the most up-to-date information.

[ M ]Material SUS304-WPB Spring Constant ±10%

Specifications

Part Number-L
VUR10-40
■VUR:Fmax. (Allowable Deflection) = Lx60% Spring Constant 0.29N/mm {0.03kgf/mm}
Part NumberO.D.Wire Dia.FN{kgf}ReferenceUnit PriceVolume Discount Rate
TypeD-LD1dmax.max.PitchSolid LengthTotal Coils1 ~ 3 pc(s).4~910~1920~100
VUR5-156.250.4592.65{0.27}1.75.010    
20123.53{0.36}2.2
256.350.50154.41{0.45}1.97.514
30185.29{0.54}2.3
356.450.55216.17{0.63}2.39.616.5    
40247.06{0.72}2.6
456.550.60277.94{0.81}2.113.822
50308.82{0.90}2.4
VUR6-157.350.5092.65{0.27}1.95.09    
207.450.55123.53{0.36}2.06.611
25154.41{0.45}2.5
30185.29{0.54}3.0
357.550.60216.17{0.63}2.79.014    
40247.06{0.72}3.0
457.650.65277.94{0.81}2.413.319.5
50308.82{0.90}2.7
557.750.70339.70{0.99}2.318.225
603610.59{1.08}2.5
VUR8-209.650.65123.53{0.36}2.46.89.5    
25154.41{0.45}2.9
309.750.70185.29{0.54}2.79.112
35216.17{0.63}3.2    
40247.06{0.72}3.6
459.950.80277.94{0.81}2.416.820
50308.82{0.90}2.6
55339.70{0.99}2.9    
603610.58{1.08}3.2
6510.150.903911.47{1.17}2.228.831
704212.36{1.26}2.3
804814.12{1.44}2.7
VUR10-2011.850.70123.53{0.36}3.35.67    
2511.950.75154.41{0.45}3.17.59
3012.050.80185.29{0.54}2.710.412    
35216.17{0.63}3.2
40247.06{0.72}3.6
4512.250.90277.94{0.81}2.816.217
50308.82{0.90}3.1
55339.70{0.99}3.4    
603610.58{1.08}3.8
653911.47{1.17}4.1
7012.451.004212.60{1.26}2.926.025
804814.12{1.44}3.3
VUR12-2514.050.80154.41{0.45}3.67.28    
30185.29{0.54}4.3
3514.250.90216.17{0.63}3.311.311.5    
40247.06{0.72}3.8
45277.94{0.81}4.3
5014.451.00308.82{0.90}3.317.016
55339.70{0.99}3.7    
603610.58{1.08}4.0
653911.47{1.17}4.3
7014.651.104212.35{1.26}3.325.322
804814.11{1.44}3.8    
905415.88{1.62}4.3
VUR16-3518.451.00216.17{0.63}4.79.58.5    
40247.06{0.72}5.3
4518.651.10277.94{0.81}4.513.211
50308.82{0.90}5.0
55339.70{0.99}5.5    
603610.58{1.08}6.0
6518.851.203911.47{1.17}5.018.014    
704212.35{1.26}5.4
804814.11{1.44}6.2    
905415.88{1.62}6.9
1006017.64{1.80}7.7
[ ! ]The values of solid length are for reference only. There may be some variations depending on the lot.
[ ! ]Both ends are not ground for all sizes.
[ ! ]Usage Count: 1 Million Times
■VUF:Fmax. (Allowable Deflection) = Lx45% Spring Constant 0.49N/mm {0.05kgf/mm}
Part NumberO.D.Wire Dia.FN{kgf}ReferenceUnit PriceVolume Discount Rate
TypeD-LD1dmax.max.PitchSolid LengthTotal Coils1 ~ 3 pc(s).4~910~1920~100
VUF5-15*6.350.506.753.33{0.34}2.34.37.5    
20*9.04.41{0.45}3.1
256.550.6011.255.49{0.56}2.18.413
3013.56.57{0.67}2.5
3515.757.64{0.78}2.9    
406.750.7018.08.82{0.90}1.916.122
4520.259.90{1.01}2.1
5022.510.98{1.12}2.4
VUF6-157.550.606.753.33{0.34}1.96.09    
209.04.41{0.45}2.5
2511.255.49{0.56}3.1
3013.56.57{0.67}3.8
357.750.7015.757.64{0.78}2.710.514    
4018.08.82{0.90}3.1
4520.259.90{1.01}3.5
507.950.8022.510.98{1.12}2.418.422
5524.7512.05{1.23}2.6
6027.013.23{1.35}2.9
VUF8-209.750.709.04.41{0.45}3.16.07.5    
2511.255.49{0.56}3.8
3013.56.57{0.67}4.6
359.950.8015.757.64{0.78}3.310.011.5    
4018.08.82{0.90}3.8
4520.259.90{1.01}4.3
5022.510.98{1.12}4.8
5510.351.0024.7512.05{1.23}2.524.023    
6027.013.23{1.35}2.7
6529.2514.31{1.46}3.0
7031.515.39{1.57}3.2
8036.017.64{1.80}3.6
VUF10-2012.050.809.04.41{0.45}3.36.47    
2511.255.49{0.56}4.2
3013.56.57{0.67}5.0    
3512.250.9015.757.64{0.78}3.99.910
4018.08.82{0.90}4.4
4520.259.90{1.01}5.0
5022.510.98{1.12}5.6
5512.651.1024.7512.05{1.23}3.121.518.5    
6027.013.23{1.35}3.4
6529.2514.31{1.46}3.7
7031.515.39{1.57}4.0
8036.017.64{1.80}4.6
VUF12-2514.451.0011.255.49{0.56}3.110.09    
3013.56.57{0.67}3.8
3515.757.64{0.78}4.4    
4018.08.82{0.90}5.0
4520.259.90{1.01}5.6
5014.651.1022.510.98{1.12}4.314.912.5
5524.7512.05{1.23}4.8    
6027.013.23{1.35}5.2
6529.2514.31{1.46}5.7
7014.851.2031.515.39{1.57}4.421.617
8036.017.64{1.80}5.0    
9040.519.80{2.02}5.6
VUF16-3518.851.2015.757.64{0.78}4.711.48.5    
4018.08.82{0.90}5.3
4520.259.90{1.01}6.0
5022.510.98{1.12}6.7
5519.051.3024.7512.05{1.23}5.216.311.5    
6027.013.23{1.35}5.7
6529.2514.31{1.46}6.2    
7019.251.4031.515.39{1.57}5.421.014
8036.017.64{1.80}6.2    
9040.519.80{2.02}6.9
10045.022.05{2.25}7.7
[ ! ]The values of solid length are for reference only. There may be some variations depending on the lot.
[ ! ]Both ends are not ground for * marked types; both ends are ground for others.
[ ! ]Usage Count: 1 Million Times
■VUL:Fmax. (Allowable Deflection) = Lx40% Spring Constant 0.98N/mm{0.10kgf/mm}
Part NumberO.D.Wire Dia.FN{kgf}ReferenceUnit PriceVolume Discount Rate
TypeD-LD1dmax.max.PitchSolid LengthTotal Coils1 ~ 3 pc(s).4~910~1920~100
VUL5-156.550.6065.88{0.60}2.54.87    
2087.84{0.80}3.3
256.750.70109.80{1.00}2.39.112
301211.76{1.20}2.7
351413.72{1.40}3.2    
406.950.801615.68{1.60}2.216.019
451817.64{1.80}2.5
502019.60{2.00}2.8
VUL6-157.750.7065.88{0.60}2.16.38    
2087.84{0.80}2.9
257.950.80109.80{1.00}2.310.412
301211.76{1.20}2.7
351413.72{1.40}3.2    
408.150.901615.68{1.60}2.516.217
451817.64{1.80}2.8
502019.60{2.00}3.1
552221.56{2.20}3.4
602423.52{2.40}3.8
VUL8-2010.150.9087.84{0.80}2.49.59.5    
25109.80{1.00}2.9
3010.351.001211.76{1.20}2.514.013
351413.72{1.40}2.9    
401615.68{1.60}3.3
451817.64{1.80}3.8
502019.60{2.00}4.2
552221.56{2.20}4.6    
6010.751.202423.52{2.40}2.728.823
652625.48{2.60}3.0
702827.44{2.80}3.2
803231.36{3.20}3.6
VUL10-2012.451.0087.84{0.80}3.18.57.5    
25109.80{1.00}3.8
3012.651.101211.76{1.20}3.212.710.5    
351413.72{1.40}3.7
401615.68{1.60}4.2
451817.64{1.80}4.7
502019.60{2.00}5.3
5513.051.302221.56{2.20}3.125.418.5    
602423.52{2.40}3.4
652625.48{2.60}3.7
702827.44{2.80}4.0
803231.36{3.20}4.6
VUL12-2514.851.20109.80{1.00}2.912.69.5    
301211.76{1.20}3.5
351413.72{1.40}4.1    
401615.68{1.60}4.7
451817.64{1.80}5.3
502019.60{2.00}5.9
5515.251.402221.56{2.20}4.121.714.5    
602423.52{2.40}4.4
652625.48{2.60}4.8
702827.44{2.80}5.2
803231.36{3.20}5.9    
903635.28{3.60}6.7
VUL16-3519.451.501413.72{1.40}4.115.89.5    
401615.68{1.60}4.7
451817.64{1.80}5.3
502019.60{2.00}5.9
5519.851.702221.56{2.20}4.424.713.5    
602423.52{2.40}4.8
652625.48{2.60}5.2    
702827.44{2.80}5.6
803231.36{3.20}6.4    
903635.28{3.60}7.2
1004039.20{4.00}8.0
[ ! ]The values of solid length are for reference only. There may be some variations depending on the lot.
[ ! ]Both ends are ground for all sizes.
[ ! ]Usage Count: 1 Million Times
■VUM:Fmax. (Allowable Deflection) = Lx35% Spring Constant 2.94N/mm{0.30kgf/mm}
Part NumberO.D.Wire Dia.FN{kgf}ReferenceUnit PriceVolume Discount Rate
TypeD-LD1dmax.max.PitchSolid LengthTotal Coils1 ~ 3 pc(s).4~910~1920~100
VUM5-156.950.805.2515.39{1.57}2.36.87.5    
207.150.907.020.58{2.10}1.811.712
258.7525.68{2.62}2.3
307.351.0010.530.87{3.15}2.414.513.5
3512.2535.97{3.67}2.8    
4014.041.16{4.20}3.2
457.551.1015.7546.26{4.72}2.522.019
5017.551.45{5.25}2.8
VUM6-158.150.905.2515.39{1.57}2.37.77.5    
207.020.58{2.10}3.0
258.351.008.7525.68{2.62}2.811.010
3010.530.87{3.15}3.3
3512.2535.97{3.67}3.9    
408.751.2014.041.16{4.20}2.621.016.5
4515.7546.26{4.72}2.9
5017.551.45{5.25}3.2
558.951.3019.2556.55{5.77}2.629.922
6021.061.74{6.30}2.9
VUM8-2010.551.107.020.58{2.10}3.38.87    
258.7525.68{2.62}4.2
3010.530.87{3.15}5.0
3510.951.3012.2535.97{3.67}3.515.611    
4014.041.16{4.20}4.0
4515.7546.26{4.72}4.5
5017.551.45{5.25}5.0
5511.351.5019.2556.55{5.77}3.327.817.5    
6021.061.74{6.30}3.6
6522.7566.84{6.82}3.9
7024.572.03{7.35}4.2
8028.082.32{8.40}4.8
VUM10-2012.851.207.020.58{2.10}4.08.46    
2513.051.308.7525.68{2.62}4.210.47
3010.530.87{3.15}5.0    
3512.2535.97{3.67}5.8
4013.451.5014.041.16{4.20}3.818.811.5
4515.7546.26{4.72}4.3
5017.551.45{5.25}4.8
5519.2556.55{5.77}5.2    
6021.061.74{6.30}5.7
6513.851.7022.7566.84{6.82}4.328.916
7024.572.03{7.35}4.7
8028.082.32{8.40}5.3
VUM12-2515.251.408.7525.68{2.62}5.09.86    
3010.530.87{3.15}6.0
3512.2535.97{3.67}7.0    
4015.651.6014.041.16{4.20}5.016.09
4515.7546.26{4.72}5.6
5017.551.45{5.25}6.3
5519.2556.55{5.77}6.9    
6016.051.8021.061.74{6.30}5.523.412
6522.7566.84{6.82}5.9
7024.572.03{7.35}6.4
8028.082.32{8.40}7.3    
9031.592.61{9.45}8.2
VUM16-3520.051.8012.2535.97{3.67}5.814.47    
4014.041.16{4.20}6.7
4515.7546.26{4.72}7.5
5017.551.45{5.25}8.3
5519.2556.55{5.77}9.2    
6020.852.2021.061.74{6.30}5.528.612
6522.7566.84{6.82}5.9    
7024.572.03{7.35}6.4
8028.082.32{8.40}7.3    
9031.592.61{9.45}8.2
10035.0102.90{10.50}9.1
[ ! ]The values of solid length are for reference only. There may be some variations depending on the lot.
[ ! ]Both ends are ground for all sizes.
[ ! ]Usage Count: 1 Million Times
■Spring Constant
 TypeVURVUFVULVUM
D 
5 N/mm
0.29
{kgf/mm}
{0.03}
  N/mm
0.49
{kgf/mm}
{0.05}
  N/mm
0.98
{kgf/mm}
{0.10}
  N/mm
2.94
{kgf/mm}
{0.30}
 
6        
8        
10        
12        
16        
Fmax.F=Lx60%F=Lx45%F=Lx40%F=Lx35%

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
VUF5-15
VUF5-20
VUF5-25
VUF5-30
VUF5-35
VUF5-40
VUF5-45
VUF5-50
VUF6-15
VUF6-20
VUF6-25
VUF6-30
VUF6-35
VUF6-40
VUF6-45
VUF6-50
VUF6-55
VUF6-60
VUF8-20
VUF8-25
VUF8-30
VUF8-35
VUF8-40
VUF8-45
VUF8-50
VUF8-55
VUF8-60
VUF8-65
VUF8-70
VUF8-80
VUF10-20
VUF10-25
VUF10-30
VUF10-35
VUF10-40
VUF10-45
VUF10-50
VUF10-55
VUF10-60
VUF10-65
VUF10-70
VUF10-80
VUF12-25
VUF12-30
VUF12-35
VUF12-40
VUF12-45
VUF12-50
VUF12-55
VUF12-60
VUF12-65
VUF12-70
VUF12-80
VUF12-90
VUF16-35
VUF16-40
VUF16-45
VUF16-50
VUF16-55
VUF16-60
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSFree Length L
(mm)
Inner Dia. D-2d (or D)
(Ø)
Outer Dia. D (or D1)
(Ø)
Height with the max. load applied ([Free Length] – [Allowable Deflection])
(mm)
Spring Constant
(N/mm)
Allowable Load (Configurable Range)
(N)
Max. Load
(N)
Material Wire Dia.
(Ø)
End Surface Status Total Coils Solid Length
(mm)
Allowable Deflection
(mm)
1 Piece(s)Available Same day 101556.358.250.491.51~4.503.33-0.5Without Grinding7.54.36.75
1 Piece(s)Available Same day 102056.35110.491.51~4.504.41-0.5Without Grinding7.54.39
1 Piece(s)Available 14 Day(s) or more 102556.5513.750.494.51~8.505.49-0.6With Grinding138.411.25
1 Piece(s)Available 14 Day(s) or more 103056.5516.50.494.51~8.506.57-0.6With Grinding138.413.5
1 Piece(s)Available 14 Day(s) or more 103556.5519.250.494.51~8.507.64-0.6With Grinding138.415.75
1 Piece(s)Available 14 Day(s) or more 104056.75220.498.51~16.008.82-0.7With Grinding2216.118
1 Piece(s)Available 14 Day(s) or more 104556.7524.750.498.51~16.009.9-0.7With Grinding2216.120.25
1 Piece(s)Available 14 Day(s) or more 105056.7527.50.498.51~16.0010.98-0.7With Grinding2216.122.5
1 Piece(s)Available Same day 101567.558.250.491.51~4.503.33-0.6With Grinding966.75
1 Piece(s)Available Same day 102067.55110.491.51~4.504.41-0.6With Grinding969
1 Piece(s)Available 14 Day(s) or more 102567.5513.750.494.51~8.505.49-0.6With Grinding9611.25
1 Piece(s)Available 14 Day(s) or more 103067.5516.50.494.51~8.506.57-0.6With Grinding9613.5
1 Piece(s)Available Same day 103567.7519.250.494.51~8.507.64-0.7With Grinding1410.515.75
1 Piece(s)Available 14 Day(s) or more 104067.75220.498.51~16.008.82-0.7With Grinding1410.518
1 Piece(s)Available 14 Day(s) or more 104567.7524.750.498.51~16.009.9-0.7With Grinding1410.520.25
1 Piece(s)Available 14 Day(s) or more 105067.9527.50.498.51~16.0010.98-0.8With Grinding2218.422.5
1 Piece(s)Available 14 Day(s) or more 105567.9530.250.498.51~16.0012.05-0.8With Grinding2218.424.75
1 Piece(s)Available 14 Day(s) or more 106067.95330.498.51~16.0013.23-0.8With Grinding2218.427
1 Piece(s)Available 14 Day(s) or more 102089.75110.491.51~4.504.41-0.7With Grinding7.569
1 Piece(s)Available 14 Day(s) or more 102589.7513.750.494.51~8.505.49-0.7With Grinding7.5611.25
1 Piece(s)Available 14 Day(s) or more 103089.7516.50.494.51~8.506.57-0.7With Grinding7.5613.5
1 Piece(s)Available 14 Day(s) or more 103589.9519.250.494.51~8.507.64-0.8With Grinding11.51015.75
1 Piece(s)Available 14 Day(s) or more 104089.95220.498.51~16.008.82-0.8With Grinding11.51018
1 Piece(s)Available 14 Day(s) or more 104589.9524.750.498.51~16.009.9-0.8With Grinding11.51020.25
1 Piece(s)Available Same day 105089.9527.50.498.51~16.0010.98-0.8With Grinding11.51022.5
1 Piece(s)Available Same day 1055810.3530.250.498.51~16.0012.05-1With Grinding232424.75
1 Piece(s)Available 14 Day(s) or more 1060810.35330.498.51~16.0013.23-1With Grinding232427
1 Piece(s)Available 14 Day(s) or more 1065810.3535.750.498.51~16.0014.31-1With Grinding232429.25
1 Piece(s)Available 14 Day(s) or more 1070810.3538.50.498.51~16.0015.39-1With Grinding232431.5
1 Piece(s)Available 14 Day(s) or more 1080810.35440.4916.01~30.0017.64-1With Grinding232436
1 Piece(s)Available Same day 10201012.05110.491.51~4.504.41-0.8With Grinding76.49
1 Piece(s)Available Same day 10251012.0513.750.494.51~8.505.49-0.8With Grinding76.411.25
1 Piece(s)Available 14 Day(s) or more 10301012.0516.50.494.51~8.506.57-0.8With Grinding76.413.5
1 Piece(s)Available 14 Day(s) or more 10351012.0519.250.494.51~8.507.64-0.9With Grinding109.915.75
1 Piece(s)Available 14 Day(s) or more 10401012.25220.498.51~16.008.82-0.9With Grinding109.918
1 Piece(s)Available 14 Day(s) or more 10451012.2524.750.498.51~16.009.9-0.9With Grinding109.920.25
1 Piece(s)Available 14 Day(s) or more 10501012.2527.50.498.51~16.0010.98-0.9With Grinding109.922.5
1 Piece(s)Available 14 Day(s) or more 10551012.6530.250.498.51~16.0012.05-1.1With Grinding18.521.524.75
1 Piece(s)Available 14 Day(s) or more 10601012.65330.498.51~16.0013.23-1.1With Grinding18.521.527
1 Piece(s)Available 14 Day(s) or more 10651012.6535.750.498.51~16.0014.31-1.1With Grinding18.521.529.25
1 Piece(s)Available 14 Day(s) or more 10701012.6538.50.498.51~16.0015.39-1.1With Grinding18.521.531.5
1 Piece(s)Available 14 Day(s) or more 10801012.65440.4916.01~30.0017.64-1.1With Grinding18.521.536
1 Piece(s)Available 14 Day(s) or more 10251214.4513.750.494.51~8.505.49-1With Grinding91011.25
1 Piece(s)Available 14 Day(s) or more 10301214.4516.50.494.51~8.506.57-1With Grinding91013.5
1 Piece(s)Available 14 Day(s) or more 10351214.4519.250.494.51~8.507.64-1With Grinding91015.75
1 Piece(s)Available 14 Day(s) or more 10401214.45220.498.51~16.008.82-1With Grinding91018
1 Piece(s)Available 14 Day(s) or more 10451214.4524.750.498.51~16.009.9-1With Grinding91020.25
1 Piece(s)Available 14 Day(s) or more 10501214.6527.50.498.51~16.0010.98-1.1With Grinding12.514.922.5
1 Piece(s)Available Same day 10551214.6530.250.498.51~16.0012.05-1.1With Grinding12.514.924.75
1 Piece(s)Available 14 Day(s) or more 10601214.65330.498.51~16.0013.23-1.1With Grinding12.514.927
1 Piece(s)Available 14 Day(s) or more 10651214.6535.750.498.51~16.0014.31-1.1With Grinding12.514.929.25
1 Piece(s)Available 14 Day(s) or more 10701214.8538.50.498.51~16.0015.39-1.2With Grinding1721.631.5
1 Piece(s)Available 14 Day(s) or more 10801214.65440.4916.01~30.0017.64-1.2With Grinding1721.636
1 Piece(s)Available 14 Day(s) or more 10901214.8549.50.4916.01~30.0019.8-1.2With Grinding1721.640.5
1 Piece(s)Available 14 Day(s) or more 10351618.8519.250.494.51~8.507.64-1.2With Grinding8.511.415.75
1 Piece(s)Available 14 Day(s) or more 10401618.85220.498.51~16.008.82-1.2With Grinding8.511.418
1 Piece(s)Available 14 Day(s) or more 10451618.8524.750.498.51~16.009.9-1.2With Grinding8.511.420.25
1 Piece(s)Available 14 Day(s) or more 10501618.8527.50.498.51~16.0010.98-1.2With Grinding8.511.422.5
1 Piece(s)Available 14 Day(s) or more 10551619.0530.250.498.51~16.0012.05-1.3With Grinding11.516.324.75
1 Piece(s)Available Same day 10601619.05330.498.51~16.0013.23-1.3With Grinding11.516.327

Loading...

 

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)