(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Linear Shafts-Straight Type

Linear Shafts-Straight Type

[Features] Straight type shaft (linear shaft, hardened shaft, guide shaft, slide shaft). L size standard expanded! You can now purchase from an even more complete lineup.

Note that, for some of the types shown here, order might be unable to be received by the MISUMI Indonesia offices.

AAA
Straight:Related Image
 
Type[ M ]Material[ H ]Hardness[ S ]Surface Treatment
D Tol. g6D Tol. h5D Tol. f8
SFJSFU-SUJ2 EquivalentEffective Hardened
Depth of Induction
Hardening >> P.142
SUJ2 Equivalent: 58HRC~
SUS440C or 13Cr stainless: 56HRC~
-
ZSFJ--
SSFJSSFU-SUS440C or 13Cr stainless
PSFJPSFU-SUJ2 EquivalentHard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 5µ or More
PSSFJPSSFU-SUS440C or 13Cr stainless
RSFJ--SUJ2 EquivalentLow Temp. Black Chrome Plating
--PSFGS45C Equivalent-Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 10µ or More
--PSSFGSUS304

[ ! ]Features of Low Temp. Black Chrome Plating p1_156
[ ! ]L Dimension Tolerance, Circularity, Straightness, Perpendicularity, Concentricity and Changes in Hardness >> P.141

Specifications

Part Number-L
SFJ20-75
   

Part NumberL
1mm Increments
D Tol.C
TypeDg6h5f8
(D Tol. g6)
SFJ
SSFJ
PSFJ
PSSFJ

(D Tol. h5)
SFU
SSFU
PSFU
PSSFU

(D Tol. f8)
PSFG
PSSFG



310~ 400-0.002
-0.008
0
-0.004
-0.2 or Less
410~ 400-0.004
-0.012
0
-0.005
-0.2 or Less
510~ 400-0.004
-0.012
0
-0.005
-0.2 or Less
6
15~ 800-0.004
-0.012
0
-0.005
-0.010
-0.028
0.5 or Less
815~1000-0.005
-0.014
0
-0.006
-0.013
-0.035
0.5 or Less
1015~1000-0.005
-0.014
0
-0.006
-0.013
-0.035
0.5 or Less
1215~1000-0.006
-0.017
0
-0.008
-0.016
-0.043
0.5 or Less
1315~1200-0.006
-0.017
0
-0.008
-0.016
-0.043
0.5 or Less
1515~1200-0.006
-0.017
0
-0.008
-0.016
-0.043
0.5 or Less
1630~1200-0.006
-0.017
0
-0.008
-0.016
-0.043
0.5 or Less
1830~1200-0.006
-0.017
0
-0.008
-0.016
-0.043
0.5 or Less
2030~1200-0.007
-0.020
0
-0.009
-0.020
-0.053
1.0 or Less
2535~1200-0.007
-0.020
0
-0.009
-0.020
-0.053
1.0 or Less
3035~1500-0.007
-0.020
0
-0.009
-0.020
-0.053
1.0 or Less
3535~1500-0.009
-0.025
0
-0.011
-0.025
-0.064
1.0 or Less
4050~1500-0.009
-0.025
0
-0.011
-0.025
-0.064
1.0 or Less
5065~1500-0.009
-0.025
0
-0.011
-0.025
-0.064
1.0 or Less

Part NumberL
1mm Increments
D Tol.
g6
C
TypeD
(D Tol. g6)
Low Temp. Black

Chrome Plating
RSFJ
310~400-0.002
-0.008
0.2 or Less
410~400-0.004
-0.012
0.2 or Less
510~400-0.004
-0.012
0.2 or Less
6
20~500-0.004
-0.012
0.5 or Less
820~500-0.005
-0.014
0.5 or Less
1020~500-0.005
-0.014
0.5 or Less
1220~500-0.006
-0.017
0.5 or Less
1325~500-0.006
-0.017
0.5 or Less
1525~500-0.006
-0.017
0.5 or Less
1630~500-0.006
-0.017
0.5 or Less
1830~500-0.006
-0.017
0.5 or Less
2030~500-0.007
-0.020
1.0 or Less
2535~500-0.007
-0.020
1.0 or Less
3035~500-0.007
-0.020
1.0 or Less

Part NumberL
Fixed
D Tol.
g6
C
TypeD
ZSFJ10100-0.005
-0.014
0.5 or Less
12100-0.006
-0.017
0.5 or Less
3000.5 or Less
20200-0.007
-0.020
1.0 or Less
3001.0 or Less

Alterations

Straight:Related Image

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
PSFG6-[20-600/1]
PSFG8-[20-800/1]
PSFG10-[20-800/1]
PSFG12-[20-1000/1]
PSFG13-[25-1000/1]
PSFG15-[25-1000/1]
PSFG16-[30-1200/1]
PSFG18-[30-1200/1]
PSFG20-[30-1200/1]
PSFG25-[35-1200/1]
PSFG30-[35-1500/1]
PSFG35-[35-1500/1]
PSFG40-[50-1500/1]
PSFG50-[65-1500/1]
PSFJ3-[10-400/1]
PSFJ4-[10-400/1]
PSFJ5-[10-400/1]
PSFJ6-[20-600/1]
PSFJ8-[20-800/1]
PSFJ10-[20-800/1]
PSFJ12-[20-1000/1]
PSFJ13-[25-1000/1]
PSFJ15-[25-1000/1]
PSFJ16-[30-1200/1]
PSFJ18-[30-1200/1]
PSFJ20-[30-1200/1]
PSFJ25-[35-1200/1]
PSFJ30-[35-1500/1]
PSFJ35-[35-1500/1]
PSFJ40-[50-1500/1]
PSFJ50-[65-1500/1]
PSFU3-[10-400/1]
PSFU4-[10-400/1]
PSFU5-[10-400/1]
PSFU6-[15-900/1]
PSFU8-[15-1100/1]
PSFU10-[15-1200/1]
PSFU12-[15-1400/1]
PSFU13-[15-1400/1]
PSFU15-[15-1400/1]
PSFU16-[30-1400/1]
PSFU18-[30-1400/1]
PSFU20-[30-1400/1]
PSFU25-[35-1400/1]
PSFU30-[35-1500/1]
PSFU35-[35-1500/1]
PSFU40-[50-1500/1]
PSFU50-[65-1500/1]
PSSFG6-[15-800/1]
PSSFG8-[15-1000/1]
PSSFG10-[15-1000/1]
PSSFG12-[15-1200/1]
PSSFG13-[15-1200/1]
PSSFG15-[15-1200/1]
PSSFG16-[30-1200/1]
PSSFG18-[30-1200/1]
PSSFG20-[30-1200/1]
PSSFG25-[35-1200/1]
PSSFG30-[35-1500/1]
PSSFG35-[35-1500/1]
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSMaterial Heat Treatment Surface Treatment Shaft Dia. D
(Ø)
Length L
(mm)
Shaft Fit Tolerance Hardness
1 Piece(s) 4 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating620 ~ 600f8No Induction Hardening
1 Piece(s) 3 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating820 ~ 800f8No Induction Hardening
1 Piece(s) 3 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1020 ~ 800f8No Induction Hardening
1 Piece(s) 3 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1220 ~ 1000f8No Induction Hardening
1 Piece(s) 3 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1325 ~ 1000f8No Induction Hardening
1 Piece(s) 3 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1525 ~ 1000f8No Induction Hardening
1 Piece(s) 3 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1630 ~ 1200f8No Induction Hardening
1 Piece(s) 9 Day(s) or more 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1830 ~ 1200f8No Induction Hardening
1 Piece(s) 3 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating2030 ~ 1200f8No Induction Hardening
1 Piece(s) 3 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating2535 ~ 1200f8No Induction Hardening
1 Piece(s) 3 Day(s) 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating3035 ~ 1500f8No Induction Hardening
1 Piece(s) 10 Day(s) or more 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating3535 ~ 1500f8No Induction Hardening
1 Piece(s) 12 Day(s) or more 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating4050 ~ 1500f8No Induction Hardening
1 Piece(s) 12 Day(s) or more 10[Steel] S45C EquivalentNot ProvidedHard Chrome Plating5065 ~ 1500f8No Induction Hardening
1 Piece(s) 9 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating310 ~ 400g6Induction Hardened (58HRC~)
1 Piece(s) 9 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating410 ~ 400g6Induction Hardened (58HRC~)
1 Piece(s) 9 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating510 ~ 400g6Induction Hardened (58HRC~)
1 Piece(s) 3 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating620 ~ 600g6Induction Hardened (58HRC~)
1 Piece(s) 3 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating820 ~ 800g6Induction Hardened (58HRC~)
1 Piece(s) 3 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1020 ~ 800g6Induction Hardened (58HRC~)
1 Piece(s) 3 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1220 ~ 1000g6Induction Hardened (58HRC~)
1 Piece(s) 3 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1325 ~ 1000g6Induction Hardened (58HRC~)
1 Piece(s) 3 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1525 ~ 1000g6Induction Hardened (58HRC~)
1 Piece(s) 3 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1630 ~ 1200g6Induction Hardened (58HRC~)
1 Piece(s) 9 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1830 ~ 1200g6Induction Hardened (58HRC~)
1 Piece(s) 3 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating2030 ~ 1200g6Induction Hardened (58HRC~)
1 Piece(s) 4 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating2535 ~ 1200g6Induction Hardened (58HRC~)
1 Piece(s) 3 Day(s) 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating3035 ~ 1500g6Induction Hardened (58HRC~)
1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating3535 ~ 1500g6Induction Hardened (58HRC~)
1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating4050 ~ 1500g6Induction Hardened (58HRC~)
1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating5065 ~ 1500g6Induction Hardened (58HRC~)
1 Piece(s) 9 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating310 ~ 400h5Induction Hardened (58HRC~)
1 Piece(s) 9 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating410 ~ 400h5Induction Hardened (58HRC~)
1 Piece(s) 9 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating510 ~ 400h5Induction Hardened (58HRC~)
1 Piece(s) 9 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating615 ~ 900h5Induction Hardened (58HRC~)
1 Piece(s) 9 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating815 ~ 1100h5Induction Hardened (58HRC~)
1 Piece(s) 9 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1015 ~ 1200h5Induction Hardened (58HRC~)
1 Piece(s) 9 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1215 ~ 1400h5Induction Hardened (58HRC~)
1 Piece(s) 9 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1315 ~ 1400h5Induction Hardened (58HRC~)
1 Piece(s) 9 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1515 ~ 1400h5Induction Hardened (58HRC~)
1 Piece(s) 9 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1630 ~ 1400h5Induction Hardened (58HRC~)
1 Piece(s) 9 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1830 ~ 1400h5Induction Hardened (58HRC~)
1 Piece(s) 9 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating2030 ~ 1400h5Induction Hardened (58HRC~)
1 Piece(s) 9 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating2535 ~ 1400h5Induction Hardened (58HRC~)
1 Piece(s) 9 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating3035 ~ 1500h5Induction Hardened (58HRC~)
1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating3535 ~ 1500h5Induction Hardened (58HRC~)
1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating4050 ~ 1500h5Induction Hardened (58HRC~)
1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating5065 ~ 1500h5Induction Hardened (58HRC~)
1 Piece(s) 9 Day(s) or more 10[Stainless Steel] SUS304Not ProvidedHard Chrome Plating615 ~ 800f8No Induction Hardening
1 Piece(s) 9 Day(s) or more 10[Stainless Steel] SUS304Not ProvidedHard Chrome Plating815 ~ 1000f8No Induction Hardening
1 Piece(s) 9 Day(s) or more 10[Stainless Steel] SUS304Not ProvidedHard Chrome Plating1015 ~ 1000f8No Induction Hardening
1 Piece(s) 9 Day(s) or more 10[Stainless Steel] SUS304Not ProvidedHard Chrome Plating1215 ~ 1200f8No Induction Hardening
1 Piece(s) 9 Day(s) or more 10[Stainless Steel] SUS304Not ProvidedHard Chrome Plating1315 ~ 1200f8No Induction Hardening
1 Piece(s) 9 Day(s) or more 10[Stainless Steel] SUS304Not ProvidedHard Chrome Plating1515 ~ 1200f8No Induction Hardening
1 Piece(s) 9 Day(s) or more 10[Stainless Steel] SUS304Not ProvidedHard Chrome Plating1630 ~ 1200f8No Induction Hardening
1 Piece(s) 9 Day(s) or more 10[Stainless Steel] SUS304Not ProvidedHard Chrome Plating1830 ~ 1200f8No Induction Hardening
1 Piece(s) 9 Day(s) or more 10[Stainless Steel] SUS304Not ProvidedHard Chrome Plating2030 ~ 1200f8No Induction Hardening
1 Piece(s) 9 Day(s) or more 10[Stainless Steel] SUS304Not ProvidedHard Chrome Plating2535 ~ 1200f8No Induction Hardening
1 Piece(s) 9 Day(s) or more 10[Stainless Steel] SUS304Not ProvidedHard Chrome Plating3035 ~ 1500f8No Induction Hardening
1 Piece(s) 10 Day(s) or more 10[Stainless Steel] SUS304Not ProvidedHard Chrome Plating3535 ~ 1500f8No Induction Hardening

Loading...

 

Basic Information

Basic Shape Solid End Shape (Left) No Machining End Shape (Right) No Machining
Shaft End Perpendicularity Perpendicularity (0.2)

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)