(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Linear Shafts-One End Stepped and Tapped, One End Threaded / One End Stepped, One End Threaded

Linear Shafts-One End Stepped and Tapped, One End Threaded / One End Stepped, One End Threaded

[Features] One end stepped, one end male thread type shaft (linear shaft, hardened shaft, guide shaft, slide shaft). L size standard expanded! You can now purchase from an even more complete lineup.

One End Stepped/One End Threaded:Related Image

Type[ M ]Material[ H ]Hardness[ S ]Surface Treatment
One End Stepped and Tapped One End ThreadedOne End Stepped, One End Threaded
D Tol. g6D Tol. h5D Tol. f8D Tol. g6D Tol. h5D Tol. f8
SFABSFUA-SFNBSFUB-SUJ2 EquivalentEffective Hardened Depth of Induction Hardening >> P.142
SUJ2 Equivalent: 58HRC~
SUS440C or 13Cr stainless : 56HRC~
-
SSFABSSFUA-SSFNBSSFUB-SUS440C or 13Cr stainless
PSFABPSFUA-PSFNBPSFUB-SUJ2 EquivalentHard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 5µ or More ~
PSSFABPSSFUA-PSSFNBPSSFUB-SUS440C or 13Cr stainless
RSFAB--RSFNB--SUJ2 EquivalentLow Temp. Black Chrome Plating
--PSFGB--PSNGBS45C Equivalent-Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 10µ or More ~
--PSSFGB--PSSNGBSUS304

[ ! ]Shaft End Machined Area (Effective Thread Length + Approx. 10mm)Annealing may lower hardness.
[ ! ] L Dimension Tolerance, Circularity, Straightness, Perpendicularity, Concentricity and Changes in Hardness >> P.141
[ ! ] Features of Low Temp. Black Chrome Plating p1_156

Specifications

Part Number-L-F-P-M-T-S-Q
SFNB20
SFAB20
-
-
400
400
-
-
F25
F25
-
-
P16
P16

-

M10
-
-
T35
T35
-
-
S25
S25
-
-
Q16
Q16

Part Number1mm IncrementM (Coarse)
Selection
Q SelectionD Tol.(Y)Max.RC
TypeDLFTSPg6h5f8
One End Stepped and Tapped One End Threaded825~9962≤F≤Px42≤T≤Qx5(When Q≤6)
S≤T-2

(When Q=8, 10)
S≤T-3

(When Q≥12)
S≤T-5

(W/o Threads)
S=0
[ ! ]S=0 is only applicable to One End Stepped and Tapped One End Threaded.
[ ! ]S≥Pitchx3
63          34568      -0.005
-0.014
0
-0.006
-0.013
-0.035
8000.3 or Less0.5 or Less
1025~9966~8345         456810     -0.005
-0.014
0
-0.006
-0.013
-0.035
8000.3 or Less0.5 or Less
(D Tol. g6)
SFAB
SSFAB
PSFAB
PSSFAB
RSFAB
(D Tol. h5)
SFUA
SSFUA
PSFUA
PSSFUA
1225~11966~103456         5681012    -0.006
-0.017
0
-0.008
-0.016
-0.043
10000.3 or Less0.5 or Less
1325~11966~1134568        5681012    -0.006
-0.017
0
-0.008
-0.016
-0.043
10000.3 or Less0.5 or Less
1525~11966~133456810       5681012    -0.006
-0.017
0
-0.008
-0.016
-0.043
10000.3 or Less0.5 or Less
1625~11966~143456810       568101216   -0.006
-0.017
0
-0.008
-0.016
-0.043
12000.3 or Less0.5 or Less
1825~11968~16 45681012      568101216   -0.006
-0.017
0
-0.008
-0.016
-0.043
12000.3 or Less0.5 or Less
2025~11968~17 45681012       6810121620  -0.007
-0.020
0
-0.009
-0.020
-0.053
12000.3 or Less1.0 or Less
(D≤30,L≤500,Ymax.≤800)
(D Tol. f8)
PSFGB
PSSFGB
2525~11968~22 4568101216       81012162024 -0.007
-0.020
0
-0.009
-0.020
-0.053
12000.3 or Less1.0 or Less
3025~14969~27  5681012162024     8101216202430-0.007
-0.020
0
-0.009
-0.020
-0.053
15000.3 or Less1.0 or Less
3525~14969~32  5681012162024      101216202430-0.009
-0.025
0
-0.011
-0.025
-0.064
15000.5 or Less1.0 or Less
4025~149611~37   68101216202430      1216202430-0.009
-0.025
0
-0.011
-0.025
-0.064
15000.5 or Less1.0 or Less
5025~149611~47   68101216202430       16202430-0.009
-0.025
0
-0.011
-0.025
-0.064
15000.5 or Less1.0 or Less

Part Number1mm IncrementQ SelectionD Tol.(Y)Max.RC
TypeDLFTSPg6h5f8
One End Stepped, One End Threaded825~ 7962≤F≤Px42≤T≤Qx5(When Q≤6)
S≤T-2

(When Q=8, 10)
S≤T-3

(When Q≥12)
S≤T-5


[ ! ]S≥Pitchx3
634568      -0.005
-0.014
0
-0.006
-0.013
-0.035
8000.3 or Less0.5 or Less
1025~ 7966~8 456810     -0.005
-0.014
0
-0.006
-0.013
-0.035
8000.3 or Less0.5 or Less
(D Tol. g6)
SFNB
SSFNB
PSFNB
PSSFNB
RSFNB
(D Tol. h5)
SFUB
SSFUB
PSFUB
PSSFUB
1225~ 9966~10  5681012    -0.006
-0.017
0
-0.008
-0.016
-0.043
10000.3 or Less0.5 or Less
1325~ 9966~11  5681012    -0.006
-0.017
0
-0.008
-0.016
-0.043
10000.3 or Less0.5 or Less
1525~ 9966~13  5681012    -0.006
-0.017
0
-0.008
-0.016
-0.043
10000.3 or Less0.5 or Less
1625~11966~14  568101216   -0.006
-0.017
0
-0.008
-0.016
-0.043
12000.3 or Less0.5 or Less
1825~11968~16  568101216   -0.006
-0.017
0
-0.008
-0.016
-0.043
12000.3 or Less0.5 or Less
2025~11968~17   6810121620  -0.007
-0.020
0
-0.009
-0.020
-0.053
12000.3 or Less1.0 or Less
(D≤30,L≤500,Ymax.≤800)
(D Tol. f8)
PSNGB
PSSNGB
2525~11968~22    81012162024 -0.007
-0.020
0
-0.009
-0.020
-0.053
12000.3 or Less1.0 or Less
3025~14969~27    8101216202430-0.007
-0.020
0
-0.009
-0.020
-0.053
15000.3 or Less1.0 or Less
3525~14969~32     101216202430-0.009
-0.025
0
-0.011
-0.025
-0.064
15000.5 or Less1.0 or Less
4025~149611~37      1216202430-0.009
-0.025
0
-0.011
-0.025
-0.064
15000.5 or Less1.0 or Less
5025~149611~47       16202430-0.009
-0.025
0
-0.011
-0.025
-0.064
15000.5 or Less1.0 or Less

Coarse Thread Dimensions
MPitch
30.5
40.7
50.8
61.0
81.25
101.5
121.75
162.0
202.5
243.0
303.5

Part Number1mm IncrementM (Coarse)
Selection
Q SelectionD Tol.(Y)Max.RC
TypeDLFTSPg6
One End Stepped and Tapped One End Threaded825~5002≤F≤Px42≤T≤Qx5(When Q≤6)
S≤T-2

(When Q=8, 10)
S≤T-3

(When Q≥12)
S≤T-5

(W/o Threads)
S=0
[ ! ]S=0 is only applicable to One End Stepped and Tapped One End Threaded.
[ ! ]S≥Pitchx3
63         34568      -0.005
-0.014
8000.3 or Less0.5 or Less
1025~5006~8345        456810     -0.005
-0.014
8000.3 or Less0.5 or Less
(D Tol. g6)
Low Temp. Black Chrome Plating
RSFAB
(Ymax.≤800)
1225~5006~103456        5681012    -0.006
-0.017
10000.3 or Less0.5 or Less
1325~5006~1134568       5681012    -0.006
-0.017
10000.3 or Less0.5 or Less
1525~5006~133456810      5681012    -0.006
-0.017
10000.3 or Less0.5 or Less
1625~5006~143456810      568101216   -0.006
-0.017
12000.3 or Less0.5 or Less
1825~5008~16 45681012     568101216   -0.006
-0.017
12000.3 or Less0.5 or Less
2025~5008~17 45681012      6810121620  -0.007
-0.020
12000.3 or Less1.0 or Less
 2525~5008~22 4568101216      81012162024 -0.007
-0.020
12000.3 or Less1.0 or Less
3025~5009~27  5681012162024    8101216202430-0.007
-0.020
15000.3 or Less1.0 or Less

Part Number1mm IncrementQ SelectionD Tol.(Y)Max.RC
TypeDLFTSPg6
One End Stepped, One End Threaded825~5002≤F≤Px42≤T≤Qx5(When Q≤6)
S≤T-2

(When Q=8, 10)
S≤T-3

(When Q≥12)
S≤T-5


[ ! ]S≥Pitchx3
634568      -0.005
-0.014
8000.3 or Less0.5 or Less
1025~5006~8 456810     -0.005
-0.014
8000.3 or Less0.5 or Less
(D Tol. g6)
Low Temp. Black Chrome Plating
RSFNB
(Ymax.≤800)
1225~5006~10  5681012    -0.006
-0.017
10000.3 or Less0.5 or Less
1325~5006~11  5681012    -0.006
-0.017
10000.3 or Less0.5 or Less
1525~5006~13  5681012    -0.006
-0.017
10000.3 or Less0.5 or Less
1625~5006~14  568101216   -0.006
-0.017
12000.3 or Less0.5 or Less
1825~5008~16  568101216   -0.006
-0.017
12000.3 or Less0.5 or Less
2025~5008~17   6810121620  -0.007
-0.020
12000.3 or Less1.0 or Less
 2525~5008~22    81012162024 -0.007
-0.020
12000.3 or Less1.0 or Less
3025~5009~27    8101216202430-0.007
-0.020
15000.3 or Less1.0 or Less
[ ! ] P dimensions require M+3≤P. [ ! ] L+F dimensions require Mx4 or more.
[ ! ] When D=Q, specify T=S as S dimensions. However, L and T dimensions have manufacturing priority and the S dimension will be T-(Pitchx2).

Alterations

One End Stepped/One End Threaded:Related Image

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
PSFAB8-[25-796/1]-F[2-24/1]-P6-M3-T[2-56/1]-S[0-53/1]-Q[3,​4,​5,​6,​8]
PSFAB8-[25-796/1]-F[2-24/1]-P6-M3-T[2-56/1]-S[0-53/1]-QMC[3,​4,​5,​6,​8]
PSFAB10-[25-796/1]-F[2-32/1]-P[6-8/1]-M[3,​4,​5]-T[2-70/1]-S[0-67/1]-Q[4,​5,​6,​8,​10]
PSFAB10-[25-796/1]-F[2-32/1]-P[6-8/1]-M[3,​4,​5]-T[2-70/1]-S[0-67/1]-QMC[4,​5,​6,​8,​10]
PSFAB10-[25-796/1]-F[2-32/1]-P[6-8/1]-M[3,​4,​5]-T[2-70/1]-S[0-67/1]-QMS10
PSFAB12-[25-996/1]-F[2-40/1]-P[6-10/1]-M[3,​4,​5,​6]-T[2-84/1]-S[0-84/1]-Q[5,​6,​8,​10,​12]
PSFAB12-[25-996/1]-F[2-40/1]-P[6-10/1]-M[3,​4,​5,​6]-T[2-84/1]-S[0-84/1]-QMC[5,​6,​8,​10,​12]
PSFAB12-[25-996/1]-F[2-40/1]-P[6-10/1]-M[3,​4,​5,​6]-T[2-84/1]-S[0-84/1]-QMS[10,​12]
PSFAB13-[25-996/1]-F[2-44/1]-P[6-11/1]-M[3,​4,​5,​6,​8]-T[2-84/1]-S[0-79/1]-Q[5,​6,​8,​10,​12]
PSFAB13-[25-996/1]-F[2-44/1]-P[6-11/1]-M[3,​4,​5,​6,​8]-T[2-84/1]-S[0-79/1]-QMC[5,​6,​8,​10,​12]
PSFAB13-[25-996/1]-F[2-44/1]-P[6-11/1]-M[3,​4,​5,​6,​8]-T[2-84/1]-S[0-79/1]-QMS[10,​12]
PSFAB15-[25-996/1]-F[2-52/1]-P[6-13/1]-M[3,​4,​5,​6,​8,​10]-T[2-84/1]-S[0-79/1]-Q[5,​6,​8,​10,​12]
PSFAB15-[25-996/1]-F[2-52/1]-P[6-13/1]-M[3,​4,​5,​6,​8,​10]-T[2-84/1]-S[0-79/1]-QMC[5,​6,​8,​10,​12,​15]
PSFAB15-[25-996/1]-F[2-52/1]-P[6-13/1]-M[3,​4,​5,​6,​8,​10]-T[2-84/1]-S[0-79/1]-QMS[10,​12,​14]
PSFAB16-[25-1196/1]-F[2-56/1]-P[6-14/1]-M[3,​4,​5,​6,​8,​10]-T[2-112/1]-S[0-107/1]-Q[5,​6,​8,​10,​12,​16]
PSFAB16-[25-1196/1]-F[2-56/1]-P[6-14/1]-M[3,​4,​5,​6,​8,​10]-T[2-112/1]-S[0-107/1]-QMC[5,​6,​8,​10,​12,​15]
PSFAB16-[25-1196/1]-F[2-56/1]-P[6-14/1]-M[3,​4,​5,​6,​8,​10]-T[2-112/1]-S[0-107/1]-QMS[10,​12,​14]
PSFAB18-[25-1196/1]-F[2-56/1]-P[6-16/1]-M[4,​5,​6,​8,​10,​12]-T[2-112/1]-S[0-107/1]-Q[5,​6,​8,​10,​12,​16]
PSFAB18-[25-1196/1]-F[2-56/1]-P[6-16/1]-M[4,​5,​6,​8,​10,​12]-T[2-112/1]-S[0-107/1]-QMC[5,​6,​8,​10,​12,​15,​17]
PSFAB18-[25-1196/1]-F[2-56/1]-P[6-16/1]-M[4,​5,​6,​8,​10,​12]-T[2-112/1]-S[0-107/1]-QMS[10,​12,​14,​18]
PSFAB20-[25-1196/1]-F[2-68/1]-P[8-17/1]-M[4,​5,​6,​8,​10,​12]-T[2-140/1]-S[0-135/1]-Q[6,​8,​10,​12,​16,​20]
PSFAB20-[25-1196/1]-F[2-68/1]-P[8-17/1]-M[4,​5,​6,​8,​10,​12]-T[2-140/1]-S[0-135/1]-QMC[6,​8,​10,​12,​15,​17,​20]
PSFAB20-[25-1196/1]-F[2-68/1]-P[8-17/1]-M[4,​5,​6,​8,​10,​12]-T[2-140/1]-S[0-135/1]-QMS[10,​12,​14,​18]
PSFAB25-[25-1196/1]-F[2-88/1]-P[8-22/1]-M[4,​5,​6,​8,​10,​12,​16]-T[2-110/1]-S[0-135/1]-Q[8,​10,​12,​16,​20,​24]
PSFAB25-[25-1196/1]-F[2-88/1]-P[8-22/1]-M[4,​5,​6,​8,​10,​12,​16]-T[2-110/1]-S[0-135/1]-QMC[8,​10,​12,​15,​17,​20,​25]
PSFAB25-[25-1196/1]-F[2-88/1]-P[8-22/1]-M[4,​5,​6,​8,​10,​12,​16]-T[2-110/1]-S[0-135/1]-QMS[10,​12,​14,​18]
PSFAB30-[25-1496/1]-F[2-108/1]-P[9-27/1]-M[5,​6,​8,​10,​12,​16,​20,​24]-T[2-210/1]-S[0-205/1]-Q[8,​10,​12,​16,​20,​24,​30]
PSFAB30-[25-1496/1]-F[2-108/1]-P[9-27/1]-M[5,​6,​8,​10,​12,​16,​20,​24]-T[2-210/1]-S[0-205/1]-QMC[8,​10,​12,​15,​17,​20,​25,​30]
PSFAB30-[25-1496/1]-F[2-108/1]-P[9-27/1]-M[5,​6,​8,​10,​12,​16,​20,​24]-T[2-210/1]-S[0-205/1]-QMS[10,​12,​14,​18]
PSFAB35-[25-1496/1]-F[2-128/1]-P[9-32/1]-M[5,​6,​8,​10,​12,​16,​20,​24]-T[2-210/1]-S[0-205/1]-Q[10,​12,​16,​20,​24,​30]
PSFAB35-[25-1496/1]-F[2-128/1]-P[9-32/1]-M[5,​6,​8,​10,​12,​16,​20,​24]-T[2-210/1]-S[0-205/1]-QMC[10,​12,​15,​17,​20,​25,​30]
PSFAB35-[25-1496/1]-F[2-128/1]-P[9-32/1]-M[5,​6,​8,​10,​12,​16,​20,​24]-T[2-210/1]-S[0-205/1]-QMS[10,​12,​14,​18]
PSFAB40-[25-1496/1]-F[2-148/1]-P[11-37/1]-M[6,​8,​10,​12,​16,​20,​24,​30]-T[2-210/1]-S[0-205/1]-Q[12,​16,​20,​24,​30]
PSFAB40-[25-1496/1]-F[2-148/1]-P[11-37/1]-M[6,​8,​10,​12,​16,​20,​24,​30]-T[2-210/1]-S[0-205/1]-QMC[12,​15,​17,​20,​25,​30]
PSFAB40-[25-1496/1]-F[2-148/1]-P[11-37/1]-M[6,​8,​10,​12,​16,​20,​24,​30]-T[2-210/1]-S[0-205/1]-QMS[12,​14,​18]
PSFAB50-[25-1496/1]-F[2-188/1]-P[11-47/1]-M[6,​8,​10,​12,​16,​20,​24,​30]-T[2-210/1]-S[0-205/1]-Q[16,​20,​24,​30]
PSFAB50-[25-1496/1]-F[2-188/1]-P[11-47/1]-M[6,​8,​10,​12,​16,​20,​24,​30]-T[2-210/1]-S[0-205/1]-QMC[15,​17,​20,​25,​30]
PSFAB50-[25-1496/1]-F[2-188/1]-P[11-47/1]-M[6,​8,​10,​12,​16,​20,​24,​30]-T[2-210/1]-S[0-205/1]-QMS[14,​18]
PSFGB8-[25-796/1]-F[2-24/1]-P6-M3-T[2-56/1]-S[0-53/1]-Q[3,​4,​5,​6,​8]
PSFGB8-[25-796/1]-F[2-24/1]-P6-M3-T[2-56/1]-S[0-53/1]-QMC[3,​4,​5,​6,​8]
PSFGB10-[25-796/1]-F[2-32/1]-P[6-8/1]-M[3,​4,​5]-T[2-70/1]-S[0-67/1]-Q[4,​5,​6,​8,​10]
PSFGB10-[25-796/1]-F[2-32/1]-P[6-8/1]-M[3,​4,​5]-T[2-70/1]-S[0-67/1]-QMC[4,​5,​6,​8,​10]
PSFGB10-[25-796/1]-F[2-32/1]-P[6-8/1]-M[3,​4,​5]-T[2-70/1]-S[0-67/1]-QMS10
PSFGB12-[25-996/1]-F[2-40/1]-P[6-10/1]-M[3,​4,​5,​6]-T[2-84/1]-S[0-79/1]-Q[5,​6,​8,​10,​12]
PSFGB12-[25-996/1]-F[2-40/1]-P[6-10/1]-M[3,​4,​5,​6]-T[2-84/1]-S[0-79/1]-QMC[5,​6,​8,​10,​12]
PSFGB12-[25-996/1]-F[2-40/1]-P[6-10/1]-M[3,​4,​5,​6]-T[2-84/1]-S[0-79/1]-QMS[10,​12]
PSFGB13-[25-996/1]-F[2-44/1]-P[6-11/1]-M[3,​4,​5,​6,​8]-T[2-84/1]-S[0-79/1]-Q[5,​6,​8,​10,​12]
PSFGB13-[25-996/1]-F[2-44/1]-P[6-11/1]-M[3,​4,​5,​6,​8]-T[2-84/1]-S[0-79/1]-QMC[5,​6,​8,​10,​12]
PSFGB13-[25-996/1]-F[2-44/1]-P[6-11/1]-M[3,​4,​5,​6,​8]-T[2-84/1]-S[0-79/1]-QMS[10,​12]
PSFGB15-[25-996/1]-F[2-52/1]-P[6-13/1]-M[3,​4,​5,​6,​8,​10]-T[2-84/1]-S[0-84/1]-Q[5,​6,​8,​10,​12,​16]
PSFGB15-[25-996/1]-F[2-52/1]-P[6-13/1]-M[3,​4,​5,​6,​8,​10]-T[2-84/1]-S[0-84/1]-QMC[5,​6,​8,​10,​12,​15]
PSFGB15-[25-996/1]-F[2-52/1]-P[6-13/1]-M[3,​4,​5,​6,​8,​10]-T[2-84/1]-S[0-84/1]-QMS[10,​12,​14]
PSFGB16-[25-1196/1]-F[2-56/1]-P[6-14/1]-M[3,​4,​5,​6,​8,​10]-T[2-112/1]-S[0-107/1]-Q[5,​6,​8,​10,​12,​16]
PSFGB16-[25-1196/1]-F[2-56/1]-P[6-14/1]-M[3,​4,​5,​6,​8,​10]-T[2-112/1]-S[0-107/1]-QMC[5,​6,​8,​10,​12,​15]
PSFGB16-[25-1196/1]-F[2-56/1]-P[6-14/1]-M[3,​4,​5,​6,​8,​10]-T[2-112/1]-S[0-107/1]-QMS[10,​12,​14]
PSFGB18-[25-1196/1]-F[2-56/1]-P[6-16/1]-M[4,​5,​6,​8,​10,​12]-T[2-112/1]-S[0-107/1]-Q[5,​6,​8,​10,​12,​16]
PSFGB18-[25-1196/1]-F[2-56/1]-P[6-16/1]-M[4,​5,​6,​8,​10,​12]-T[2-112/1]-S[0-107/1]-QMC[5,​6,​8,​10,​12,​15,​17]
PSFGB18-[25-1196/1]-F[2-56/1]-P[6-16/1]-M[4,​5,​6,​8,​10,​12]-T[2-112/1]-S[0-107/1]-QMS[10,​12,​14,​18]
PSFGB20-[25-1196/1]-F[2-68/1]-P[8-17/1]-M[4,​5,​6,​8,​10,​12]-T[2-140/1]-S[0-140/1]-Q[6,​8,​10,​12,​16,​20]
PSFGB20-[25-1196/1]-F[2-68/1]-P[8-17/1]-M[4,​5,​6,​8,​10,​12]-T[2-140/1]-S[0-140/1]-QMC[6,​8,​10,​12,​15,​17,​20]
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSEnd Shape (Left) Material Heat Treatment Surface Treatment Shaft Dia. D
(Ø)
Length L
(mm)
Shaft Fit Tolerance Hardness Change Thread Q to Fine One [QMC]
(mm)
Change Thread Q to Fine One [QMS]
(mm)
F
(mm)
P
(mm)
S
(mm)
T
(mm)
Threaded (Coarse) [M]
(mm)
Threaded (Coarse) [Q]
(mm)
1 Piece(s) 4 Day(s) 10Tapped[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating825 ~ 796g6Induction Hardened (58HRC~)--2 ~ 2460 ~ 532 ~ 5633 ~ 8
1 Piece(s) 4 Day(s) 10Tapped[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating825 ~ 796g6Induction Hardened (58HRC~)3 ~ 8-2 ~ 2460 ~ 532 ~ 563-
1 Piece(s) 4 Day(s) 10Tapped[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1025 ~ 796g6Induction Hardened (58HRC~)--2 ~ 326 ~ 80 ~ 672 ~ 703 ~ 54 ~ 10
1 Piece(s) 4 Day(s) 10Tapped[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1025 ~ 796g6Induction Hardened (58HRC~)4 ~ 10-2 ~ 326 ~ 80 ~ 672 ~ 703 ~ 5-
1 Piece(s) 4 Day(s) 10Tapped[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1025 ~ 796g6Induction Hardened (58HRC~)-102 ~ 326 ~ 80 ~ 672 ~ 703 ~ 5-
1 Piece(s) 4 Day(s) 10Tapped[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1225 ~ 996g6Induction Hardened (58HRC~)--2 ~ 406 ~ 100 ~ 842 ~ 843 ~ 65 ~ 12
1 Piece(s) 4 Day(s) 10Tapped[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1225 ~ 996g6Induction Hardened (58HRC~)5 ~ 12-2 ~ 406 ~ 100 ~ 842 ~ 843 ~ 6-
1 Piece(s) 4 Day(s) 10Tapped[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1225 ~ 996g6Induction Hardened (58HRC~)-10 ~ 122 ~ 406 ~ 100 ~ 842 ~ 843 ~ 6-
1 Piece(s) 4 Day(s) 10Tapped[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1325 ~ 996g6Induction Hardened (58HRC~)--2 ~ 446 ~ 110 ~ 792 ~ 843 ~ 85 ~ 12
1 Piece(s) 4 Day(s) 10Tapped[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1325 ~ 996g6Induction Hardened (58HRC~)5 ~ 12-2 ~ 446 ~ 110 ~ 792 ~ 843 ~ 8-
1 Piece(s) 4 Day(s) 10Tapped[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1325 ~ 996g6Induction Hardened (58HRC~)-10 ~ 122 ~ 446 ~ 110 ~ 792 ~ 843 ~ 8-
1 Piece(s) 4 Day(s) 10Tapped[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1525 ~ 996g6Induction Hardened (58HRC~)--2 ~ 526 ~ 130 ~ 792 ~ 843 ~ 105 ~ 12
1 Piece(s) 4 Day(s) 10Tapped[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1525 ~ 996g6Induction Hardened (58HRC~)5 ~ 15-2 ~ 526 ~ 130 ~ 792 ~ 843 ~ 10-
1 Piece(s) 4 Day(s) 10Tapped[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1525 ~ 996g6Induction Hardened (58HRC~)-10 ~ 142 ~ 526 ~ 130 ~ 792 ~ 843 ~ 10-
1 Piece(s) 4 Day(s) 10Tapped[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1625 ~ 1196g6Induction Hardened (58HRC~)--2 ~ 566 ~ 140 ~ 1072 ~ 1123 ~ 105 ~ 16
1 Piece(s) 4 Day(s) 10Tapped[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1625 ~ 1196g6Induction Hardened (58HRC~)5 ~ 15-2 ~ 566 ~ 140 ~ 1072 ~ 1123 ~ 10-
1 Piece(s) 4 Day(s) 10Tapped[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1625 ~ 1196g6Induction Hardened (58HRC~)-10 ~ 142 ~ 566 ~ 140 ~ 1072 ~ 1123 ~ 10-
1 Piece(s) 10 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1825 ~ 1196g6Induction Hardened (58HRC~)--2 ~ 566 ~ 160 ~ 1072 ~ 1124 ~ 125 ~ 16
1 Piece(s) 10 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1825 ~ 1196g6Induction Hardened (58HRC~)5 ~ 17-2 ~ 566 ~ 160 ~ 1072 ~ 1124 ~ 12-
1 Piece(s) 10 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating1825 ~ 1196g6Induction Hardened (58HRC~)-10 ~ 182 ~ 566 ~ 160 ~ 1072 ~ 1124 ~ 12-
1 Piece(s) 4 Day(s) 10Tapped[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating2025 ~ 1196g6Induction Hardened (58HRC~)--2 ~ 688 ~ 170 ~ 1352 ~ 1404 ~ 126 ~ 20
1 Piece(s) 4 Day(s) 10Tapped[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating2025 ~ 1196g6Induction Hardened (58HRC~)6 ~ 20-2 ~ 688 ~ 170 ~ 1352 ~ 1404 ~ 12-
1 Piece(s) 4 Day(s) 10Tapped[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating2025 ~ 1196g6Induction Hardened (58HRC~)-10 ~ 182 ~ 688 ~ 170 ~ 1352 ~ 1404 ~ 12-
1 Piece(s) 4 Day(s) 10Tapped[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating2525 ~ 1196g6Induction Hardened (58HRC~)--2 ~ 888 ~ 220 ~ 1352 ~ 1104 ~ 168 ~ 24
1 Piece(s) 4 Day(s) 10Tapped[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating2525 ~ 1196g6Induction Hardened (58HRC~)8 ~ 25-2 ~ 888 ~ 220 ~ 1352 ~ 1104 ~ 16-
1 Piece(s) 4 Day(s) 10Tapped[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating2525 ~ 1196g6Induction Hardened (58HRC~)-10 ~ 182 ~ 888 ~ 220 ~ 1352 ~ 1104 ~ 16-
1 Piece(s) 4 Day(s) 10Tapped[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating3025 ~ 1496g6Induction Hardened (58HRC~)--2 ~ 1089 ~ 270 ~ 2052 ~ 2105 ~ 248 ~ 30
1 Piece(s) 4 Day(s) 10Tapped[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating3025 ~ 1496g6Induction Hardened (58HRC~)8 ~ 30-2 ~ 1089 ~ 270 ~ 2052 ~ 2105 ~ 24-
1 Piece(s) 4 Day(s) 10Tapped[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating3025 ~ 1496g6Induction Hardened (58HRC~)-10 ~ 182 ~ 1089 ~ 270 ~ 2052 ~ 2105 ~ 24-
1 Piece(s) 10 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating3525 ~ 1496g6Induction Hardened (58HRC~)--2 ~ 1289 ~ 320 ~ 2052 ~ 2105 ~ 2410 ~ 30
1 Piece(s) 10 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating3525 ~ 1496g6Induction Hardened (58HRC~)10 ~ 30-2 ~ 1289 ~ 320 ~ 2052 ~ 2105 ~ 24-
1 Piece(s) 10 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating3525 ~ 1496g6Induction Hardened (58HRC~)-10 ~ 182 ~ 1289 ~ 320 ~ 2052 ~ 2105 ~ 24-
1 Piece(s) 10 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating4025 ~ 1496g6Induction Hardened (58HRC~)--2 ~ 14811 ~ 370 ~ 2052 ~ 2106 ~ 3012 ~ 30
1 Piece(s) 10 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating4025 ~ 1496g6Induction Hardened (58HRC~)12 ~ 30-2 ~ 14811 ~ 370 ~ 2052 ~ 2106 ~ 30-
1 Piece(s) 10 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating4025 ~ 1496g6Induction Hardened (58HRC~)-12 ~ 182 ~ 14811 ~ 370 ~ 2052 ~ 2106 ~ 30-
1 Piece(s) 10 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating5025 ~ 1496g6Induction Hardened (58HRC~)--2 ~ 18811 ~ 470 ~ 2052 ~ 2106 ~ 3016 ~ 30
1 Piece(s) 10 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating5025 ~ 1496g6Induction Hardened (58HRC~)15 ~ 30-2 ~ 18811 ~ 470 ~ 2052 ~ 2106 ~ 30-
1 Piece(s) 10 Day(s) or more 10Tapped[Steel] SUJ2 EquivalentInduction HardenedHard Chrome Plating5025 ~ 1496g6Induction Hardened (58HRC~)-14 ~ 182 ~ 18811 ~ 470 ~ 2052 ~ 2106 ~ 30-
1 Piece(s) 4 Day(s) 10Tapped[Steel] S45C EquivalentNot ProvidedHard Chrome Plating825 ~ 796f8No Induction Hardening--2 ~ 2460 ~ 532 ~ 5633 ~ 8
1 Piece(s) 4 Day(s) 10Tapped[Steel] S45C EquivalentNot ProvidedHard Chrome Plating825 ~ 796f8No Induction Hardening3 ~ 8-2 ~ 2460 ~ 532 ~ 563-
1 Piece(s) 4 Day(s) 10Tapped[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1025 ~ 796f8No Induction Hardening--2 ~ 326 ~ 80 ~ 672 ~ 703 ~ 54 ~ 10
1 Piece(s) 4 Day(s) 10Tapped[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1025 ~ 796f8No Induction Hardening4 ~ 10-2 ~ 326 ~ 80 ~ 672 ~ 703 ~ 5-
1 Piece(s) 4 Day(s) 10Tapped[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1025 ~ 796f8No Induction Hardening-102 ~ 326 ~ 80 ~ 672 ~ 703 ~ 5-
1 Piece(s) 4 Day(s) 10Tapped[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1225 ~ 996f8No Induction Hardening--2 ~ 406 ~ 100 ~ 792 ~ 843 ~ 65 ~ 12
1 Piece(s) 4 Day(s) 10Tapped[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1225 ~ 996f8No Induction Hardening5 ~ 12-2 ~ 406 ~ 100 ~ 792 ~ 843 ~ 6-
1 Piece(s) 4 Day(s) 10Tapped[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1225 ~ 996f8No Induction Hardening-10 ~ 122 ~ 406 ~ 100 ~ 792 ~ 843 ~ 6-
1 Piece(s) 4 Day(s) 10Tapped[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1325 ~ 996f8No Induction Hardening--2 ~ 446 ~ 110 ~ 792 ~ 843 ~ 85 ~ 12
1 Piece(s) 4 Day(s) 10Tapped[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1325 ~ 996f8No Induction Hardening5 ~ 12-2 ~ 446 ~ 110 ~ 792 ~ 843 ~ 8-
1 Piece(s) 4 Day(s) 10Tapped[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1325 ~ 996f8No Induction Hardening-10 ~ 122 ~ 446 ~ 110 ~ 792 ~ 843 ~ 8-
1 Piece(s) 4 Day(s) 10Tapped[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1525 ~ 996f8No Induction Hardening--2 ~ 526 ~ 130 ~ 842 ~ 843 ~ 105 ~ 16
1 Piece(s) 4 Day(s) 10Tapped[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1525 ~ 996f8No Induction Hardening5 ~ 15-2 ~ 526 ~ 130 ~ 842 ~ 843 ~ 10-
1 Piece(s) 4 Day(s) 10Tapped[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1525 ~ 996f8No Induction Hardening-10 ~ 142 ~ 526 ~ 130 ~ 842 ~ 843 ~ 10-
1 Piece(s) 4 Day(s) 10Tapped[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1625 ~ 1196f8No Induction Hardening--2 ~ 566 ~ 140 ~ 1072 ~ 1123 ~ 105 ~ 16
1 Piece(s) 4 Day(s) 10Tapped[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1625 ~ 1196f8No Induction Hardening5 ~ 15-2 ~ 566 ~ 140 ~ 1072 ~ 1123 ~ 10-
1 Piece(s) 4 Day(s) 10Tapped[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1625 ~ 1196f8No Induction Hardening-10 ~ 142 ~ 566 ~ 140 ~ 1072 ~ 1123 ~ 10-
1 Piece(s) 10 Day(s) or more 10Tapped[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1825 ~ 1196f8No Induction Hardening--2 ~ 566 ~ 160 ~ 1072 ~ 1124 ~ 125 ~ 16
1 Piece(s) 10 Day(s) or more 10Tapped[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1825 ~ 1196f8No Induction Hardening5 ~ 17-2 ~ 566 ~ 160 ~ 1072 ~ 1124 ~ 12-
1 Piece(s) 10 Day(s) or more 10Tapped[Steel] S45C EquivalentNot ProvidedHard Chrome Plating1825 ~ 1196f8No Induction Hardening-10 ~ 182 ~ 566 ~ 160 ~ 1072 ~ 1124 ~ 12-
1 Piece(s) 4 Day(s) 10Tapped[Steel] S45C EquivalentNot ProvidedHard Chrome Plating2025 ~ 1196f8No Induction Hardening--2 ~ 688 ~ 170 ~ 1402 ~ 1404 ~ 126 ~ 20
1 Piece(s) 4 Day(s) 10Tapped[Steel] S45C EquivalentNot ProvidedHard Chrome Plating2025 ~ 1196f8No Induction Hardening6 ~ 20-2 ~ 688 ~ 170 ~ 1402 ~ 1404 ~ 12-

Loading...

 

Basic Information

Basic Shape One End Stepped End Shape (Right) Threaded Shaft End Perpendicularity Perpendicularity (0.2)

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)