(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Shafts - Hollow /One End Tapped Hollow with Wrench Flat

Shafts - Hollow /One End Tapped Hollow with Wrench Flat

"[Features] This shaft facilitates customers to arrange wiring, because the wire can be pierced into the inside of the shaft and contributes to weight saving of equipment, because the shaft is hollow."

Hollow with Wrench Flats/One End Tapped:Related Image
[ ! ]Features of Low Temp. Black Chrome Plating >>P.128
[ ! ]Low temp. black chrome plating is not applied to the inside of hollow shafts, taps, bored holes and lateral holes, and may rust.
[ ! ]Circularity, Straightness, Perpendicularity and Changes in Hardness >>P.111
[ ! ]Circularity and O.D. tolerance may not meet precision specification in areas approximately 10mm from wrench flats machined ends.
[ ! ]Annealing may lower hardness at shaft end machined areas (effective thread length + approx. 10mm).
Type[ M ]Material[ H ]Hardness[ S ]Surface Treatment
SPJTSPTRSUJ2 EquivalentEffective Hardened Depth of Induction Hardened >>P.112
SUJ2 Equivalent     58HRC~
SUS440C or 13Cr stainless 56HRC~
-
SSPJTSSPTRSUS440C or 13Cr stainless
PSPJTPSPTRSUJ2 EquivalentHard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 5µ or More
RSPJTRSPTRSUJ2 EquivalentLow Temp. Black Chrome Plating

Specifications

Part Number-L-M-SC
SPJT20
SPTR30
-
-
525
730
-
-
MT3
M20

-

SC8
Part NumberL
1mm Increment
M (Coarse Thread)D Tol.dC
TypeD
One End Tapped Hollow ShaftsSPJT
SSPJT
(* marked sizes only)
PSPJT
RSPJT
(D≤30,L≤500)
620~6003   -0.004
-0.012
20.5 or Less
*820~800 (300)4*5  -0.005
-0.014
 3 (3)0.5 or Less
*1020~800 (400)5*6  -0.005
-0.014
 4 (4)0.5 or Less
*1220~1000 (500) *8*T1(RC1/8)-0.006
-0.017
 6 (5)0.5 or Less
*1325~1000 (500) *10*T1(RC1/8)-0.006
-0.017
 7 (5)0.5 or Less
*1630~1200 (600) *12*T2(RC1/4)-0.006
-0.017
10 (6)0.5 or Less
*2030~1200 (800) *16*T3(RC3/8)-0.007
-0.020
14 (8)1.0 or Less
*2535~1200 (1000) *20 -0.007
-0.020
 16 (10)1.0 or Less
*3035~1500 (1000) *20 -0.007
-0.020
 17 (12)1.0 or Less
3535~1500  24 -0.009
-0.025
191.0 or Less
4050~1500  2430-0.009
-0.025
201.0 or Less
5060~1500  30 -0.009
-0.025
261.0 or Less

Part NumberL
1mm Increment
M (Coarse Thread)Wrench Flats DimensionsD Tol.dC
TypeDSCW1
One End Tapped Hollow Shafts with Wrench FlatsSPTR
SSPTR
(* marked sizes only)
PSPTR
RSPTR
(D≤30,L≤500)
620~6003    SC=1mm Increment
[ ! ]When D≤25
 SC+1≤L SC≥Mx2
[ ! ]When D≥30
 SC+1≤L
 
SC≥0


[ ! ]Details of Wrench Flats P.112
58-0.004
-0.012
20.5 or Less
*820~800 (300)4*5  78-0.005
-0.014
 3 (3)0.5 or Less
*1020~800 (400)5*6  88-0.005
-0.014
 4 (4)0.5 or Less
*1220~1000 (500) *8*T1(RC1/8)1010-0.006
-0.017
 6 (5)0.5 or Less
*1325~1000 (500) *10*T1(RC1/8)1110-0.006
-0.017
 7 (5)0.5 or Less
*1630~1200 (600) *12*T2(RC1/4)1410-0.006
-0.017
10 (6)0.5 or Less
*2030~1200 (800) *16*T3(RC3/8)1710-0.007
-0.020
14 (8)1.0 or Less
*2535~1200 (1000) *20 2210-0.007
-0.020
 16 (10)1.0 or Less
*3035~1500 (1000) *20 2715-0.007
-0.020
 17 (12)1.0 or Less
3535~1500  24 3015-0.009
-0.025
191.0 or Less
4050~1500  24303620-0.009
-0.025
201.0 or Less
5060~1500  30 4120-0.009
-0.025
261.0 or Less
[ ! ]When T1, T2 or T3 is selected as M, tapered thread machining is applied. (Ordering Code: MT1) [ ! ]When Mx2.5+4≥L, tap pilot holes may go through.
[ ! ]Only * marked D and M dimensions are applicable to Stainless Steel Shafts. L and d dimensions in ( ) are applicable.

Alterations

Hollow with Wrench Flats/One End Tapped:Related Image

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
PSPJT6-[20-600/1]-M3
PSPJT8-[20-800/1]-M[4,​5]
PSPJT10-[20-800/1]-M[5,​6]
PSPJT12-[20-1000/1]-M8
PSPJT12-[20-1000/1]-MT1
PSPJT13-[25-1000/1]-M10
PSPJT13-[25-1000/1]-MT1
PSPJT16-[30-1200/1]-M12
PSPJT16-[30-1200/1]-MT2
PSPJT20-[30-1200/1]-M16
PSPJT20-[30-1200/1]-MT3
PSPJT25-[35-1200/1]-M20
PSPJT30-[35-1500/1]-M20
PSPJT35-[35-1500/1]-M24
PSPJT40-[50-1500/1]-M[24,​30]
PSPJT50-[65-1500/1]-M30
PSPTR6-[20-600/1]-M3-SC[6-592/1]
PSPTR8-[20-800/1]-M[4,​5]-SC[8-792/1]
PSPTR10-[20-800/1]-M[5,​6]-SC[10-792/1]
PSPTR12-[20-1000/1]-M8-SC[16-990/1]
PSPTR12-[20-1000/1]-MT1-SC[16-990/1]
PSPTR13-[25-1000/1]-M10-SC[20-990/1]
PSPTR13-[25-1000/1]-MT1-SC[20-990/1]
PSPTR16-[30-1200/1]-M12-SC[24-1190/1]
PSPTR16-[30-1200/1]-MT2-SC[24-1190/1]
PSPTR20-[30-1200/1]-M16-SC[32-1190/1]
PSPTR20-[30-1200/1]-MT3-SC[32-1190/1]
PSPTR25-[35-1200/1]-M20-SC[40-1190/1]
PSPTR30-[35-1500/1]-M20-SC[0-1485/1]
PSPTR35-[35-1500/1]-M24-SC[0-1485/1]
PSPTR40-[50-1500/1]-M[24,​30]-SC[0-1480/1]
PSPTR50-[65-1500/1]-M30-SC[0-1480/1]
RSPJT6-[20-500/1]-M3
RSPJT8-[20-500/1]-M[4,​5]
RSPJT10-[20-500/1]-M[5,​6]
RSPJT12-[20-500/1]-M8
RSPJT12-[20-500/1]-MT1
RSPJT13-[25-500/1]-M10
RSPJT13-[25-500/1]-MT1
RSPJT16-[30-500/1]-M12
RSPJT16-[30-500/1]-MT2
RSPJT20-[30-500/1]-M16
RSPJT20-[30-500/1]-MT3
RSPJT25-[35-500/1]-M20
RSPJT30-[35-500/1]-M20
RSPTR6-[20-500/1]-M3-SC[6-500/1]
RSPTR8-[20-500/1]-M[4,​5]-SC[8-500/1]
RSPTR10-[20-500/1]-M[5,​6]-SC[10-500/1]
RSPTR12-[20-500/1]-M8-SC[16-500/1]
RSPTR12-[20-500/1]-MT1-SC[16-500/1]
RSPTR13-[25-500/1]-M10-SC[20-500/1]
RSPTR13-[25-500/1]-MT1-SC[20-500/1]
RSPTR16-[30-500/1]-M12-SC[24-500/1]
RSPTR16-[30-500/1]-MT2-SC[24-500/1]
RSPTR20-[30-500/1]-M16-SC[32-500/1]
RSPTR20-[30-500/1]-MT3-SC[32-500/1]
RSPTR25-[35-500/1]-M20-SC[40-500/1]
RSPTR30-[35-500/1]-M20-SC[0-500/1]
SPJT6-[20-600/1]-M3
SPJT8-[20-800/1]-M[4,​5]
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSMaterial Surface Treatment Shaft Dia. D
(Ø)
Length L
(mm)
Hardness Add Wrench Flats at One Location [SC]
(mm)
Change Tapped Thread M to Tapered One [MT] 1(RC1/8) 2(RC1/4) 3(RC3/8) Threaded (Coarse) [M]
(mm)
1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating620 ~ 600Induction Hardened (58HRC~)--3
1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating820 ~ 800Induction Hardened (58HRC~)--4 ~ 5
1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating1020 ~ 800Induction Hardened (58HRC~)--5 ~ 6
1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating1220 ~ 1000Induction Hardened (58HRC~)--8
1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating1220 ~ 1000Induction Hardened (58HRC~)-1-
1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating1325 ~ 1000Induction Hardened (58HRC~)--10
1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating1325 ~ 1000Induction Hardened (58HRC~)-1-
1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating1630 ~ 1200Induction Hardened (58HRC~)--12
1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating1630 ~ 1200Induction Hardened (58HRC~)-2-
1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating2030 ~ 1200Induction Hardened (58HRC~)--16
1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating2030 ~ 1200Induction Hardened (58HRC~)-3-
1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating2535 ~ 1200Induction Hardened (58HRC~)--20
1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating3035 ~ 1500Induction Hardened (58HRC~)--20
1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating3535 ~ 1500Induction Hardened (58HRC~)--24
1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating4050 ~ 1500Induction Hardened (58HRC~)--24 ~ 30
1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating5065 ~ 1500Induction Hardened (58HRC~)--30
1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating620 ~ 600Induction Hardened (58HRC~)6 ~ 592-3
1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating820 ~ 800Induction Hardened (58HRC~)8 ~ 792-4 ~ 5
1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating1020 ~ 800Induction Hardened (58HRC~)10 ~ 792-5 ~ 6
1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating1220 ~ 1000Induction Hardened (58HRC~)16 ~ 990-8
1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating1220 ~ 1000Induction Hardened (58HRC~)16 ~ 9901-
1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating1325 ~ 1000Induction Hardened (58HRC~)20 ~ 990-10
1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating1325 ~ 1000Induction Hardened (58HRC~)20 ~ 9901-
1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating1630 ~ 1200Induction Hardened (58HRC~)24 ~ 1190-12
1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating1630 ~ 1200Induction Hardened (58HRC~)24 ~ 11902-
1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating2030 ~ 1200Induction Hardened (58HRC~)32 ~ 1190-16
1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating2030 ~ 1200Induction Hardened (58HRC~)32 ~ 11903-
1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating2535 ~ 1200Induction Hardened (58HRC~)40 ~ 1190-20
1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating3035 ~ 1500Induction Hardened (58HRC~)0 ~ 1485-20
1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating3535 ~ 1500Induction Hardened (58HRC~)0 ~ 1485-24
1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating4050 ~ 1500Induction Hardened (58HRC~)0 ~ 1480-24 ~ 30
1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentHard Chrome Plating5065 ~ 1500Induction Hardened (58HRC~)0 ~ 1480-30
1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentLow Temperature Black Chrome Plating620 ~ 500Induction Hardened (58HRC~)--3
1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentLow Temperature Black Chrome Plating820 ~ 500Induction Hardened (58HRC~)--4 ~ 5
1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentLow Temperature Black Chrome Plating1020 ~ 500Induction Hardened (58HRC~)--5 ~ 6
1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentLow Temperature Black Chrome Plating1220 ~ 500Induction Hardened (58HRC~)--8
1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentLow Temperature Black Chrome Plating1220 ~ 500Induction Hardened (58HRC~)-1-
1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentLow Temperature Black Chrome Plating1325 ~ 500Induction Hardened (58HRC~)--10
1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentLow Temperature Black Chrome Plating1325 ~ 500Induction Hardened (58HRC~)-1-
1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentLow Temperature Black Chrome Plating1630 ~ 500Induction Hardened (58HRC~)--12
1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentLow Temperature Black Chrome Plating1630 ~ 500Induction Hardened (58HRC~)-2-
1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentLow Temperature Black Chrome Plating2030 ~ 500Induction Hardened (58HRC~)--16
1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentLow Temperature Black Chrome Plating2030 ~ 500Induction Hardened (58HRC~)-3-
1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentLow Temperature Black Chrome Plating2535 ~ 500Induction Hardened (58HRC~)--20
1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentLow Temperature Black Chrome Plating3035 ~ 500Induction Hardened (58HRC~)--20
1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentLow Temperature Black Chrome Plating620 ~ 500Induction Hardened (58HRC~)6 ~ 500-3
1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentLow Temperature Black Chrome Plating820 ~ 500Induction Hardened (58HRC~)8 ~ 500-4 ~ 5
1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentLow Temperature Black Chrome Plating1020 ~ 500Induction Hardened (58HRC~)10 ~ 500-5 ~ 6
1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentLow Temperature Black Chrome Plating1220 ~ 500Induction Hardened (58HRC~)16 ~ 500-8
1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentLow Temperature Black Chrome Plating1220 ~ 500Induction Hardened (58HRC~)16 ~ 5001-
1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentLow Temperature Black Chrome Plating1325 ~ 500Induction Hardened (58HRC~)20 ~ 500-10
1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentLow Temperature Black Chrome Plating1325 ~ 500Induction Hardened (58HRC~)20 ~ 5001-
1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentLow Temperature Black Chrome Plating1630 ~ 500Induction Hardened (58HRC~)24 ~ 500-12
1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentLow Temperature Black Chrome Plating1630 ~ 500Induction Hardened (58HRC~)24 ~ 5002-
1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentLow Temperature Black Chrome Plating2030 ~ 500Induction Hardened (58HRC~)32 ~ 500-16
1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentLow Temperature Black Chrome Plating2030 ~ 500Induction Hardened (58HRC~)32 ~ 5003-
1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentLow Temperature Black Chrome Plating2535 ~ 500Induction Hardened (58HRC~)40 ~ 500-20
1 Piece(s) 15 Day(s) or more 10[Steel] SUJ2 EquivalentLow Temperature Black Chrome Plating3035 ~ 500Induction Hardened (58HRC~)0 ~ 500-20
1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentNot Provided620 ~ 600Induction Hardened (58HRC~)--3
1 Piece(s) 10 Day(s) or more 10[Steel] SUJ2 EquivalentNot Provided820 ~ 800Induction Hardened (58HRC~)--4 ~ 5

Loading...

More Information

Hollow with Wrench Flats/One End Tapped:Related Image
[ ! ]About Hollow Shaft Wall Thickness Deviations, please see >> P.111

Example

Hollow with Wrench Flats/One End Tapped:Related Image
 

Basic Information

Basic Shape Hollow End Shape (Left) Tapped End Shape (Right) No Machining
Heat Treatment Induction Hardened Shaft Fit Tolerance g6

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)