(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Solid Eccentric Cam Followers-With Hexagon Socket/Flat Type/With Seal/No Seal

Solid Eccentric Cam Followers-With Hexagon Socket/Flat Type/With Seal/No Seal
  • Volume Discount

"Since the stud head and shaft are eccentric to the center of the cam follower, it is possible to finely adjust the position by turning the stud. For order of 51 or more pieces, the price is reduced by 20%."

Solid Eccentric Cam Followers-With Hexagon Socket/Flat Type/With Seal/No Seal:Related Image
[ ! ]For d10 and smaller sizes, no grease replenishing hole is provided.
[ ! ]Operating Temp.: 80°C or lower

Shape Type [ M ]Material [ A ]Accessories
Hex Socket on Head (d6 ~ 10) Hex Socket on Head and Thread (d12 ~ 16)
No Seal With Seal No Seal With Seal
Flat CFAP CFFAP CFAPH CFFAPH SUJ2 Hex Nut 1 pc.
(S45C, Black Oxide)

Specifications

Part Number - D
CFAP8 - 19
D Tolerance
16 0
- 0.008
19~30 0
- 0.009
32, 35 0
- 0.011
Part Number D
(Selectable)
M×Pitch B B1 L r f
(Min.)
H e
(Eccentricity)
Mass
(g)
Tightening
Torque
(N·cm)
(Max.)
Compliance with Standard
Type dh7 Tolerance CFFAP CFAP CFFAPH CFAPH
(With Seal)
CFFAP

(No Seal)
CFAP
6 0
− 0.012
16 6×1.0 9 11 12 28 0.5 11 3 0.25 18.5 2.94
8 0
− 0.015
19 8×1.25 11 11 12 32 0.5 13 4 0.25 28.5 7.84
10 0
− 0.015
22 10×1.25 13 12 13 36 1 15 5 0.3 45 16.7
10 0
− 0.015
26 10×1.25 13 12 13 36 1 15 5 0.3 60 16.7
(With Seal)
CFFAPH

(No Seal)
CFAPH
12 0
− 0.018
30 12×1.5 14 14 15 40 1.5 20 6 0.4 105 29.4
12 0
− 0.018
32 12×1.5 14 14 15 40 1.5 20 6 0.4 115 29.4
16 0
− 0.018
35 16×1.5 18 18 19.5 52 1.5 24 6 0.5 205 70.6
18 0
− 0.018
40 18×1.5 20 20 21.5 58 1.5 26 6 0.6 295 98
20 0
-0.021
47 20×1.5 22 24 25.5 66 1.5 36 8 0.7 450 137
20 0
-0.021
52 20×1.5 22 24 25.5 66 1.5 36 8 0.7 525 137
24 0
-0.021
62 24×1.5 25 29 30.5 80 1.5 40 8 0.8 915 245*
24 0
-0.021
72 24×1.5 25 29 30.5 80 1.5 40 8 0.8 1150 245*
30 0
-0.021
80 30×1.5 32 35 37 100 2 46 8 1 1880 480*
30 0
-0.021
85 30×1.5 32 35 37 100 2 46 8 1 1950 480*
30 0
-0.021
90 30×1.5 32 35 37 100 2 46 8 1 2000 480*
[ ! ]The standards of d12, 16 have been modified to those with the hex socket on the head and thread. [ ! ]For the performance of Cam Followers, see Table 1 on >> P. 1043. 

Solid Eccentric Cam Followers-With Hexagon Socket/Flat Type/With Seal/No Seal:Related Image Table 1: Reference Data of Cam Followers
d−D General Heavy Load
Basic Dynamic
Load Rating
C(kN)
Basic Static Load
Rating
Cor(kN)
Max. Allowable
Load
(kN)
Track Load
Capacity(kN)
Max.
Rotational
Speed(rpm)
Mass
(g)
Basic Dynamic
Load Rating
C(kN)
Basic Static
Load Rating
Cor(kN)
Max. Allowable
Load
(kN)
Track Load
Capacity(kN)
Rotational Speed
Limit(with Seal)
(rpm)
Mass
(g)
With Seal No Seal
Crowned Flat Crowned Flat
3−10 1.47 1.18 0.36 0.37 1.37 32900 47000 4.5
4−12 2.06 2.05 0.78 0.47 1.76 25900 37000 7.5
5−13 3.14 2.77 1.42 0.53 2.25 20300 29000 10.5
6−16 3.59 3.58 2.11 1.08 3.43 17500 25000 18.5 6.94 8.5 2.11 1.08 3.43 7700 19
8−19 4.17 4.65 4.73 1.37 4.02 14000 20000 28.5 8.13 11.2 4.73 1.37 4.02 6090 29
10−22 5.33 6.78 5.81 1.67 4.7 11900 17000 45 9.42 14.3 5.81 1.67 4.7 5040 46
10−26 2.06 5.49 60 2.06 5.49 61
12−30 7.87 9.79 9.37 2.45 7.06 9800 14000 105 13.4 19.8 9.37 2.45 7.06 4060 107
12−32 2.74 7.45 115 2.74 7.45 117
16−35 12 18.3 17.3 3.14 11.2 7000 10000 205 20.6 37.6 17.3 3.14 11.2 3150 207
18−40 14.7 25.2 26.1 3.72 14.4 5950 8500 295 25.2 51.3 26.1 3.72 14.4 2660 300
20-47 20.7 34.8 32.1 7.15 21 4900 7000 450 33.2 64.8 32.1 7.15 21 2380 455
20−52 8.23 23.2 525 8.23 23.2 530
24-62 30.6 53.2 49.5 10.5 34.2 4550 6500 915 46.7 92.9 49.5 10.5 34.2 2030 925
24-72 12.9 39.8 1150 12.9 39.8 1160
30-80 45.4 87.6 73.7 14.9 52.6 3500 5000 1880 67.6 145 73.7 14.9 52.6 1610 1890
30-85 16.1 56 1950 16.1 56 1960
30-90 17.3 59.3 2000 17.3 59.3 2010
[ ! ]kgf=Nx0.101972

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
CFAP8-19
CFAPH12-30
CFFAP8-19
CFFAPH12-30
CFFAPH12-32
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSOuter Dia. D
(Ø)
Width B
(mm)
Tightening Method Stud Screw Nominal (M)
(mm)
Basic Load Rating Cr (Dynamic)
(kN)
Basic Load Rating Cor (Static)
(kN)
Allowable Rotational Speed
(rpm)
Seal
1 Piece(s)Available 12 Day(s) or more 101911Hex Socket on HeadM84.174.6520000Not Provided
1 Piece(s)Available 12 Day(s) or more 103014Hex Socket on Head ThreadM12 x 1.57.879.799800Not Provided
1 Piece(s)Available 12 Day(s) or more 101911Hex Socket on HeadM84.174.6514000Provided
1 Piece(s)Available 12 Day(s) or more 103014Hex Socket on Head ThreadM12 x 1.57.879.799800Provided
1 Piece(s)Available Same day 103214Hex Socket on Head ThreadM12 x 1.57.879.799800Provided

Loading...

  1. 1

More Information

[ ! ]As the stud (dh7) is eccentric to the center of the cam follower, it is possible to finely adjust the position by turning the stud when mounting.
Part Number Substitution Table for Cam Follower Standard Changes (d12, 16)
Seal Material Old Part Number
(Hex Socket on Head)
New Part Number
(Hex Socket on Head and Thread)
With Seal SUJ2 CFFAP CFFAPH
No Seal CFAP CFAPH
 

Basic Information

Product Category Cam Followers Roller Type Cylindrical Outer Ring Cam Follower Type Solid Eccentric
Material SUJ2 Size Standards Metric System Roller Lining Not Provided
Shaft Provided Roller Guiding Method With Retainer

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)