(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Flat Bar Mounting Plate/Bracket, Symmetry Type, HRMCD

Flat Bar Mounting Plate/Bracket, Symmetry Type, HRMCD

[Standard large quantity available] 35% discount for 11 to 50 pieces, no estimate required.

Flat Bar Mounting Plates/Brackets/Center Symmetrical Type:Related Image
Flat Bar Mounting Plates/Brackets/Center Symmetrical Type:Related Image

Part Number[ M ]Material[ S ]Surface Treatment
TypeMaterial Symbol
HRMCDSSSS400D-
SSBBlack Oxide
SSMElectroless Nickel Plating
SUSUS304D-

Specifications

Part Number-A-B-T-L-G-Hole Specification
Code, Nominal Value
-D
   
Type-Material Symbol
HRMCD-SSB-A80-B60-T6-L60-G40-M6-D20
Part NumberSpecify 1mm IncrementBTLGHole Specification0.5mm Increment
TypeMaterial SymbolACodeNominal Dia.D
HRMCDSS
SSB
SSM
30~15016 22 25 32 38
50 60 75 100 125
6
9
10
12
16
19
Specify
0
.1mm
Increment
N [ ! ]
M
Z [ ! ]

[ ! ]
For the machining dimensions, see Hole Type Selection Chart.
3
4
5
6
8
10
12
3~30
SU15 20 25 32 38
50 65 100 125
  [ NG ]When SS(#) and B16, T19 not selectable [ NG ]When SU and B15, T10 ~ 19 not selectable
[ NG ]When SS(#) and B125, T10 not selectable [ NG ]When SU and B20, T19 not selectable
  

Alterations

Flat Bar Mounting Plates/Brackets/Center Symmetrical Type:Related Image

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
HRMCD-SS-A[30-150/1]-B[16,​22,​25,​32,​38,​50,​60,​75,​100,​125]-T[6,​9,​10,​12,​16,​19]-L[0-150/0.1]-G[0-125/0.1]-M[3,​4,​5,​6,​8,​10,​12]-D[3-30/0.5]
HRMCD-SS-A[30-150/1]-B[16,​22,​25,​32,​38,​50,​60,​75,​100,​125]-T[6,​9,​10,​12,​16,​19]-L[0-150/0.1]-G[0-125/0.1]-M[3,​4,​5,​6,​8,​10,​12]-DC[3-30/1]
HRMCD-SS-A[30-150/1]-B[16,​22,​25,​32,​38,​50,​60,​75,​100,​125]-T[6,​9,​10,​12,​16,​19]-L[0-150/0.1]-G[0-125/0.1]-N[3,​4,​5,​6,​8,​10,​12]-D[3-30/0.5]
HRMCD-SS-A[30-150/1]-B[16,​22,​25,​32,​38,​50,​60,​75,​100,​125]-T[6,​9,​10,​12,​16,​19]-L[0-150/0.1]-G[0-125/0.1]-N[3,​4,​5,​6,​8,​10,​12]-DC[3-30/1]
HRMCD-SS-A[30-150/1]-B[16,​22,​25,​32,​38,​50,​60,​75,​100,​125]-T[6,​9,​10,​12,​16,​19]-L[0-150/0.1]-G[0-125/0.1]-Z[3,​4,​5,​6,​8,​10,​12]-D[3-30/0.5]
HRMCD-SS-A[30-150/1]-B[16,​22,​25,​32,​38,​50,​60,​75,​100,​125]-T[6,​9,​10,​12,​16,​19]-L[0-150/0.1]-G[0-125/0.1]-Z[3,​4,​5,​6,​8,​10,​12]-DC[3-30/1]
HRMCD-SSB-A[30-150/1]-B[16,​22,​25,​32,​38,​50,​60,​75,​100,​125]-T[6,​9,​10,​12,​16,​19]-L[0-150/0.1]-G[0-125/0.1]-M[3,​4,​5,​6,​8,​10,​12]-D[3-30/0.5]
HRMCD-SSB-A[30-150/1]-B[16,​22,​25,​32,​38,​50,​60,​75,​100,​125]-T[6,​9,​10,​12,​16,​19]-L[0-150/0.1]-G[0-125/0.1]-M[3,​4,​5,​6,​8,​10,​12]-DC[3-30/1]
HRMCD-SSB-A[30-150/1]-B[16,​22,​25,​32,​38,​50,​60,​75,​100,​125]-T[6,​9,​10,​12,​16,​19]-L[0-150/0.1]-G[0-125/0.1]-N[0,​3,​4,​5,​6,​8,​10,​12]-D[3-30/0.5]
HRMCD-SSB-A[30-150/1]-B[16,​22,​25,​32,​38,​50,​60,​75,​100,​125]-T[6,​9,​10,​12,​16,​19]-L[0-150/0.1]-G[0-125/0.1]-N[0,​3,​4,​5,​6,​8,​10,​12]-DC[3-30/1]
HRMCD-SSB-A[30-150/1]-B[16,​22,​25,​32,​38,​50,​60,​75,​100,​125]-T[6,​9,​10,​12,​16,​19]-L[0-150/0.1]-G[0-125/0.1]-Z[3,​4,​5,​6,​8,​10,​12]-D[3-30/0.5]
HRMCD-SSB-A[30-150/1]-B[16,​22,​25,​32,​38,​50,​60,​75,​100,​125]-T[6,​9,​10,​12,​16,​19]-L[0-150/0.1]-G[0-125/0.1]-Z[3,​4,​5,​6,​8,​10,​12]-DC[3-30/1]
HRMCD-SSM-A[30-150/1]-B[16,​22,​25,​32,​38,​50,​60,​75,​100,​125]-T[6,​9,​10,​12,​16,​19]-L[0-150/0.1]-G[0-125/0.1]-M[0,​3,​4,​5,​6,​8,​10,​12]-D[3-30/0.5]
HRMCD-SSM-A[30-150/1]-B[16,​22,​25,​32,​38,​50,​60,​75,​100,​125]-T[6,​9,​10,​12,​16,​19]-L[0-150/0.1]-G[0-125/0.1]-M[0,​3,​4,​5,​6,​8,​10,​12]-DC[3-30/1]
HRMCD-SSM-A[30-150/1]-B[16,​22,​25,​32,​38,​50,​60,​75,​100,​125]-T[6,​9,​10,​12,​16,​19]-L[0-150/0.1]-G[0-125/0.1]-N[3,​4,​5,​6,​8,​10,​12]-D[3-30/0.5]
HRMCD-SSM-A[30-150/1]-B[16,​22,​25,​32,​38,​50,​60,​75,​100,​125]-T[6,​9,​10,​12,​16,​19]-L[0-150/0.1]-G[0-125/0.1]-N[3,​4,​5,​6,​8,​10,​12]-DC[3-30/1]
HRMCD-SSM-A[30-150/1]-B[16,​22,​25,​32,​38,​50,​60,​75,​100,​125]-T[6,​9,​10,​12,​16,​19]-L[0-150/0.1]-G[0-125/0.1]-Z[3,​4,​5,​6,​8,​10,​12]-D[3-30/0.5]
HRMCD-SSM-A[30-150/1]-B[16,​22,​25,​32,​38,​50,​60,​75,​100,​125]-T[6,​9,​10,​12,​16,​19]-L[0-150/0.1]-G[0-125/0.1]-Z[3,​4,​5,​6,​8,​10,​12]-DC[3-30/1]
HRMCD-SU-A[30-150/1]-B[15,​20,​25,​32,​38,​50,​65,​100,​125]-T[6,​9,​10,​12,​16,​19]-L[0-150/0.1]-G[0-125/0.1]-M[3,​4,​5,​6,​8,​10,​12]-D[3-30/0.5]
HRMCD-SU-A[30-150/1]-B[15,​20,​25,​32,​38,​50,​65,​100,​125]-T[6,​9,​10,​12,​16,​19]-L[0-150/0.1]-G[0-125/0.1]-M[3,​4,​5,​6,​8,​10,​12]-DC[3-30/1]
HRMCD-SU-A[30-150/1]-B[15,​20,​25,​32,​38,​50,​65,​100,​125]-T[6,​9,​10,​12,​16,​19]-L[0-150/0.1]-G[0-125/0.1]-N[3,​4,​5,​6,​8,​10,​12]-D[3-30/0.5]
HRMCD-SU-A[30-150/1]-B[15,​20,​25,​32,​38,​50,​65,​100,​125]-T[6,​9,​10,​12,​16,​19]-L[0-150/0.1]-G[0-125/0.1]-N[3,​4,​5,​6,​8,​10,​12]-DC[3-30/1]
HRMCD-SU-A[30-150/1]-B[15,​20,​25,​32,​38,​50,​65,​100,​125]-T[6,​9,​10,​12,​16,​19]-L[0-150/0.1]-G[0-125/0.1]-Z[3,​4,​5,​6,​8,​10,​12]-D[3-30/0.5]
HRMCD-SU-A[30-150/1]-B[15,​20,​25,​32,​38,​50,​65,​100,​125]-T[6,​9,​10,​12,​16,​19]-L[0-150/0.1]-G[0-125/0.1]-Z[3,​4,​5,​6,​8,​10,​12]-DC[3-30/1]
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSMaterial Surface Treatment Center Hole Dia. D (Tolerance 0 ~ + 0.2)
(mm)
Center Hole Dia. DC (Tolerance H7 Change Option)
(mm)
External Dimension A
(mm)
External Dimension B
(mm)
G
(mm)
Hole Configurable, Counterbored Hole [Z] Hole Configurable, Screw Through Hole Nominal Dia. Selection [N] Hole Configurable, Tapped Hole [M] L
(mm)
Plate Thickness T
(mm)
1 Piece(s) 10 Day(s) or more 10SS400DNot Provided3 ~ 30-30 ~ 15016 ~ 1250 ~ 125--3 ~ 120 ~ 1506 ~ 19
1 Piece(s) 10 Day(s) or more 10SS400DNot Provided-3 ~ 3030 ~ 15016 ~ 1250 ~ 125--3 ~ 120 ~ 1506 ~ 19
1 Piece(s) 10 Day(s) or more 10SS400DNot Provided3 ~ 30-30 ~ 15016 ~ 1250 ~ 125-3 ~ 12-0 ~ 1506 ~ 19
1 Piece(s) 10 Day(s) or more 10SS400DNot Provided-3 ~ 3030 ~ 15016 ~ 1250 ~ 125-3 ~ 12-0 ~ 1506 ~ 19
1 Piece(s) 10 Day(s) or more 10SS400DNot Provided3 ~ 30-30 ~ 15016 ~ 1250 ~ 1253 ~ 12--0 ~ 1506 ~ 19
1 Piece(s) 10 Day(s) or more 10SS400DNot Provided-3 ~ 3030 ~ 15016 ~ 1250 ~ 1253 ~ 12--0 ~ 1506 ~ 19
1 Piece(s) 12 Day(s) or more 10SS400DBlack Oxide3 ~ 30-30 ~ 15016 ~ 1250 ~ 125--3 ~ 120 ~ 1506 ~ 19
1 Piece(s) 12 Day(s) or more 10SS400DBlack Oxide-3 ~ 3030 ~ 15016 ~ 1250 ~ 125--3 ~ 120 ~ 1506 ~ 19
1 Piece(s) 12 Day(s) or more 10SS400DBlack Oxide3 ~ 30-30 ~ 15016 ~ 1250 ~ 125-0 ~ 12-0 ~ 1506 ~ 19
1 Piece(s) 12 Day(s) or more 10SS400DBlack Oxide-3 ~ 3030 ~ 15016 ~ 1250 ~ 125-0 ~ 12-0 ~ 1506 ~ 19
1 Piece(s) 12 Day(s) or more 10SS400DBlack Oxide3 ~ 30-30 ~ 15016 ~ 1250 ~ 1253 ~ 12--0 ~ 1506 ~ 19
1 Piece(s) 12 Day(s) or more 10SS400DBlack Oxide-3 ~ 3030 ~ 15016 ~ 1250 ~ 1253 ~ 12--0 ~ 1506 ~ 19
1 Piece(s) 12 Day(s) or more 10SS400DElectroless Nickel Plating3 ~ 30-30 ~ 15016 ~ 1250 ~ 125--0 ~ 120 ~ 1506 ~ 19
1 Piece(s) 12 Day(s) or more 10SS400DElectroless Nickel Plating-3 ~ 3030 ~ 15016 ~ 1250 ~ 125--0 ~ 120 ~ 1506 ~ 19
1 Piece(s) 12 Day(s) or more 10SS400DElectroless Nickel Plating3 ~ 30-30 ~ 15016 ~ 1250 ~ 125-3 ~ 12-0 ~ 1506 ~ 19
1 Piece(s) 12 Day(s) or more 10SS400DElectroless Nickel Plating-3 ~ 3030 ~ 15016 ~ 1250 ~ 125-3 ~ 12-0 ~ 1506 ~ 19
1 Piece(s) 12 Day(s) or more 10SS400DElectroless Nickel Plating3 ~ 30-30 ~ 15016 ~ 1250 ~ 1253 ~ 12--0 ~ 1506 ~ 19
1 Piece(s) 12 Day(s) or more 10SS400DElectroless Nickel Plating-3 ~ 3030 ~ 15016 ~ 1250 ~ 1253 ~ 12--0 ~ 1506 ~ 19
1 Piece(s) 10 Day(s) or more 10SUS304DNot Provided3 ~ 30-30 ~ 15015 ~ 1250 ~ 125--3 ~ 120 ~ 1506 ~ 19
1 Piece(s) 10 Day(s) or more 10SUS304DNot Provided-3 ~ 3030 ~ 15015 ~ 1250 ~ 125--3 ~ 120 ~ 1506 ~ 19
1 Piece(s) 10 Day(s) or more 10SUS304DNot Provided3 ~ 30-30 ~ 15015 ~ 1250 ~ 125-3 ~ 12-0 ~ 1506 ~ 19
1 Piece(s) 10 Day(s) or more 10SUS304DNot Provided-3 ~ 3030 ~ 15015 ~ 1250 ~ 125-3 ~ 12-0 ~ 1506 ~ 19
1 Piece(s) 10 Day(s) or more 10SUS304DNot Provided3 ~ 30-30 ~ 15015 ~ 1250 ~ 1253 ~ 12--0 ~ 1506 ~ 19
1 Piece(s) 10 Day(s) or more 10SUS304DNot Provided-3 ~ 3030 ~ 15015 ~ 1250 ~ 1253 ~ 12--0 ~ 1506 ~ 19

Loading...

  1. 1

Example

Flat Bar Mounting Plates/Brackets/Center Symmetrical Type:Related Image
 

Basic Information

Type Flat Bar / Rolled Aluminum Stock Part Mounting Hole Yes Slotted Hole N/A
Side Hole N/A Hole Position Center Allocation Number Of Holes 5
Type Center Symmetrical Type HRMCD

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)