(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Height Adjusting Pins - Press Fit

Height Adjusting Pins - Press Fit

- Height Adjusting Pins - Press Fit from MISUMI.
- Small Head, Tapered, with each dimension configurable. The tolerances on both ends and the tapered dimensions are also configurable.
- The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Polished, centering hole is sometimes not available for SUS304.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- Hard Chrome Plating products are not available in Precision Grade Tolerance.

Locating Pins - Small Head, Tapered, Taper Angle, D and P Selectable Tolerance - Press Fit:Related Image

[ ! ]SUS440C or 13Cr stainless has an identification groove at any position on D part.
[ ! ]Polishing and centering hole sometimes not available for SUS304.
[ ! ]P-2EtanA≥0.73 (Tip dia. Ø0.73 or more)
 Reference: tan15°≈0.267 tan30°≈0.577
tan45°=1 tan60°≈1.732
 
Material
No.
[ M ]Material[ S ]Surface Treatment[ H ]HardnessType
RoundDiamond
(1)SKS3 Equivalent-Treated Hardness: 60~63HRCKFSAKFSD
(2)SKS3 EquivalentHard Chrome PlatingTreated Hardness: 50~55HRC
Plating Hardness: 750HV~
GKFSAGKFSD
(4)SUS304--SKFSASKFSD
(5)SUS304Hard Chrome PlatingPlating Hardness: 750HV~HKFSAHKFSD
(6)SUS440C or 13Cr stainless-Treated Hardness: 50~55HRCCKFSACKFSD

Specifications

Part Number-P-L-B-E-A
 
Type Shape D Tol. P Tol. D
KFS A G S 10-P8.00-L10-B8.0-E3.0-A30

■Tolerance Selection
D
or
P
Standard GradePrecision Grade
MPGHSAB
m6p6g6h7---
1.00
~
3.00
+0.008
+0.002
+0.012
+0.006
-0.002
-0.008
0
-0.010
0
-0.01
+0.005
0
0
-0.005
3.01
~
6.00
+0.012
+0.004
+0.020
+0.012
-0.004
-0.012
0
-0.012
6.01
~
10.00
+0.015
+0.006
+0.024
+0.015
-0.005
-0.014
0
-0.015
10.01
~
18.00
+0.018
+0.007
+0.029
+0.018
-0.006
-0.017
0
-0.018
18.01
~
20.00
+0.021
+0.008
+0.035
+0.022
-0.007
-0.020
0
-0.021
[ ! ]The unit price of Precision Type is the price of Standard Type multiplied by 1.1.
[ NG ]Hard Chrome Plating products are not available in Precision Grade Tolerance.

■Press Fit
Part NumberP
0.01mm Increment
L
1mm Increment
B
0.1mm Increment
E
0.1mm Increment
A SelectionC(W)Round Shape Unit PriceDiamond Shape Unit Price
TypeShapeD Tolerance SelectionP Tolerance SelectionD(1)
KFSA
(2)
GKFSA
(4)
SKFSA
(5)
HKFSA
(6)
CKFSA
(1)
KFSD
(2)
GKFSD
(4)
SKFSD
(5)
HKFSD
(6)
CKFSD
KFS
GKFS *
SKFS
HKFS *
CKFS
A
(Round)


D
(Diamond)
M
P
G
H

*A
*B
S
M
P
G
H

*A
*B
21.00~2.002~52.0~10.00.5
~
10.0
15

30

45

60
0.3-     -----
31.00(2.00)~3.003~102.0~10.00.51.0          
41.50(2.00)~4.004~102.0~10.011.0          
52.00~5.005~102.0~15.0(10.0)11.2          
62.00~6.005~172.0~15.011.5          
83.00~8.008~212.0~20.0(15.0)1.51.8          
103.00~10.0010~233.0~20.022.2          
125.00~12.0012~243.0~30.0(25.0)22.5          
136.00~13.0013~265.0~30.0(25.0)23          
1610.00~16.0016~325.0~30.034          
2013.00~20.0020~405.0~30.035          
[ ! ]P dimension and B dimension in ( ) are applicable to Diamond Shape. [ NG ]Hard Chrome Plating products are not available for * marked Precision Grade (Precision Grade A and B).

Alterations

Locating Pins - Small Head, Tapered, Taper Angle, D and P Selectable Tolerance - Press Fit:Related Image

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
CKFSAAA2-P[1-2/0.01]-L[2-5/1]-B[2-10/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSAAA3-P[1-3/0.01]-L[3-10/1]-B[2-10/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSAAA4-P[1.5-4/0.01]-L[4-10/1]-B[2-10/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSAAA5-P[2-5/0.01]-L[5-10/1]-B[2-15/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSAAA6-P[2-6/0.01]-L[6-17/1]-B[2-15/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSAAA8-P[3-8/0.01]-L[8-21/1]-B[2-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSAAA10-P[3-10/0.01]-L[10-23/1]-B[3-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSAAA12-P[5-12/0.01]-L[12-24/1]-B[3-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSAAA13-P[6-13/0.01]-L[13-26/1]-B[5-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSAAA16-P[10-16/0.01]-L[16-32/1]-B[5-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSAAA20-P[13-20/0.01]-L[20-40/1]-B[5-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSAAB2-P[1-2/0.01]-L[2-5/1]-B[2-10/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSAAB3-P[1-3/0.01]-L[3-10/1]-B[2-10/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSAAB4-P[1.5-4/0.01]-L[4-10/1]-B[2-10/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSAAB5-P[2-5/0.01]-L[5-10/1]-B[2-15/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSAAB6-P[2-6/0.01]-L[6-17/1]-B[2-15/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSAAB8-P[3-8/0.01]-L[8-21/1]-B[2-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSAAB10-P[3-10/0.01]-L[10-23/1]-B[3-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSAAB12-P[5-12/0.01]-L[12-24/1]-B[3-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSAAB13-P[6-13/0.01]-L[13-26/1]-B[5-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSAAB16-P[10-16/0.01]-L[16-32/1]-B[5-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSAAB20-P[13-20/0.01]-L[20-40/1]-B[5-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSAAG2-P[1-2/0.01]-L[2-5/1]-B[2-10/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSAAG3-P[1-3/0.01]-L[3-10/1]-B[2-10/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSAAG4-P[1.5-4/0.01]-L[4-10/1]-B[2-10/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSAAG5-P[2-5/0.01]-L[5-10/1]-B[2-15/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSAAG6-P[2-6/0.01]-L[6-17/1]-B[2-15/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSAAG8-P[3-8/0.01]-L[8-21/1]-B[2-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSAAG10-P[3-10/0.01]-L[10-23/1]-B[3-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSAAG12-P[5-12/0.01]-L[12-24/1]-B[3-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSAAG13-P[6-13/0.01]-L[13-26/1]-B[5-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSAAG16-P[10-16/0.01]-L[16-32/1]-B[5-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSAAG20-P[13-20/0.01]-L[20-40/1]-B[5-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSAAH2-P[1-2/0.01]-L[2-5/1]-B[2-10/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSAAH3-P[1-3/0.01]-L[3-10/1]-B[2-10/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSAAH4-P[1.5-4/0.01]-L[4-10/1]-B[2-10/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSAAH5-P[2-5/0.01]-L[5-10/1]-B[2-15/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSAAH6-P[2-6/0.01]-L[6-17/1]-B[2-15/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSAAH8-P[3-8/0.01]-L[8-21/1]-B[2-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSAAH10-P[3-10/0.01]-L[10-23/1]-B[3-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSAAH12-P[5-12/0.01]-L[12-24/1]-B[3-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSAAH13-P[6-13/0.01]-L[13-26/1]-B[5-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSAAH16-P[10-16/0.01]-L[16-32/1]-B[5-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSAAH20-P[13-20/0.01]-L[20-40/1]-B[5-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSAAM2-P[1-2/0.01]-L[2-5/1]-B[2-10/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSAAM3-P[1-3/0.01]-L[3-10/1]-B[2-10/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSAAM4-P[1.5-4/0.01]-L[4-10/1]-B[2-10/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSAAM5-P[2-5/0.01]-L[5-10/1]-B[2-15/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSAAM6-P[2-6/0.01]-L[6-17/1]-B[2-15/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSAAM8-P[3-8/0.01]-L[8-21/1]-B[2-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSAAM10-P[3-10/0.01]-L[10-23/1]-B[3-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSAAM12-P[5-12/0.01]-L[12-24/1]-B[3-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSAAM13-P[6-13/0.01]-L[13-26/1]-B[5-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSAAM16-P[10-16/0.01]-L[16-32/1]-B[5-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSAAM20-P[13-20/0.01]-L[20-40/1]-B[5-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSAAP2-P[1-2/0.01]-L[2-5/1]-B[2-10/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSAAP3-P[1-3/0.01]-L[3-10/1]-B[2-10/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSAAP4-P[1.5-4/0.01]-L[4-10/1]-B[2-10/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSAAP5-P[2-5/0.01]-L[5-10/1]-B[2-15/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSAAP6-P[2-6/0.01]-L[6-17/1]-B[2-15/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSInsertion Guide Tip Shape Surface Treatment Heat Treatment Material Locating Side Outer Dia. P (Ø)
(mm)
Locating Side O.D. Tolerance Mounting Side Outer Dia. D
(Ø)
Mounting Side Tolerance A
(°)
B
(mm)
E
(mm)
L
(mm)
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless1 ~ 20.005/020.005/015 ~ 602 ~ 100.5 ~ 102 ~ 5
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless1 ~ 30.005/030.005/015 ~ 602 ~ 100.5 ~ 103 ~ 10
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless1.5 ~ 40.005/040.005/015 ~ 602 ~ 100.5 ~ 104 ~ 10
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless2 ~ 50.005/050.005/015 ~ 602 ~ 150.5 ~ 105 ~ 10
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless2 ~ 60.005/060.005/015 ~ 602 ~ 150.5 ~ 106 ~ 17
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless3 ~ 80.005/080.005/015 ~ 602 ~ 200.5 ~ 108 ~ 21
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless3 ~ 100.005/0100.005/015 ~ 603 ~ 200.5 ~ 1010 ~ 23
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless5 ~ 120.005/0120.005/015 ~ 603 ~ 300.5 ~ 1012 ~ 24
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless6 ~ 130.005/0130.005/015 ~ 605 ~ 300.5 ~ 1013 ~ 26
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless10 ~ 160.005/0160.005/015 ~ 605 ~ 300.5 ~ 1016 ~ 32
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless13 ~ 200.005/0200.005/015 ~ 605 ~ 300.5 ~ 1020 ~ 40
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless1 ~ 20/-0.00520.005/015 ~ 602 ~ 100.5 ~ 102 ~ 5
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless1 ~ 30/-0.00530.005/015 ~ 602 ~ 100.5 ~ 103 ~ 10
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless1.5 ~ 40/-0.00540.005/015 ~ 602 ~ 100.5 ~ 104 ~ 10
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless2 ~ 50/-0.00550.005/015 ~ 602 ~ 150.5 ~ 105 ~ 10
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless2 ~ 60/-0.00560.005/015 ~ 602 ~ 150.5 ~ 106 ~ 17
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless3 ~ 80/-0.00580.005/015 ~ 602 ~ 200.5 ~ 108 ~ 21
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless3 ~ 100/-0.005100.005/015 ~ 603 ~ 200.5 ~ 1010 ~ 23
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless5 ~ 120/-0.005120.005/015 ~ 603 ~ 300.5 ~ 1012 ~ 24
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless6 ~ 130/-0.005130.005/015 ~ 605 ~ 300.5 ~ 1013 ~ 26
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless10 ~ 160/-0.005160.005/015 ~ 605 ~ 300.5 ~ 1016 ~ 32
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless13 ~ 200/-0.005200.005/015 ~ 605 ~ 300.5 ~ 1020 ~ 40
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless1 ~ 2g620.005/015 ~ 602 ~ 100.5 ~ 102 ~ 5
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless1 ~ 3g630.005/015 ~ 602 ~ 100.5 ~ 103 ~ 10
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless1.5 ~ 4g640.005/015 ~ 602 ~ 100.5 ~ 104 ~ 10
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless2 ~ 5g650.005/015 ~ 602 ~ 150.5 ~ 105 ~ 10
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless2 ~ 6g660.005/015 ~ 602 ~ 150.5 ~ 106 ~ 17
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless3 ~ 8g680.005/015 ~ 602 ~ 200.5 ~ 108 ~ 21
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless3 ~ 10g6100.005/015 ~ 603 ~ 200.5 ~ 1010 ~ 23
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless5 ~ 12g6120.005/015 ~ 603 ~ 300.5 ~ 1012 ~ 24
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless6 ~ 13g6130.005/015 ~ 605 ~ 300.5 ~ 1013 ~ 26
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless10 ~ 16g6160.005/015 ~ 605 ~ 300.5 ~ 1016 ~ 32
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless13 ~ 20g6200.005/015 ~ 605 ~ 300.5 ~ 1020 ~ 40
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless1 ~ 2h720.005/015 ~ 602 ~ 100.5 ~ 102 ~ 5
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless1 ~ 3h730.005/015 ~ 602 ~ 100.5 ~ 103 ~ 10
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless1.5 ~ 4h740.005/015 ~ 602 ~ 100.5 ~ 104 ~ 10
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless2 ~ 5h750.005/015 ~ 602 ~ 150.5 ~ 105 ~ 10
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless2 ~ 6h760.005/015 ~ 602 ~ 150.5 ~ 106 ~ 17
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless3 ~ 8h780.005/015 ~ 602 ~ 200.5 ~ 108 ~ 21
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless3 ~ 10h7100.005/015 ~ 603 ~ 200.5 ~ 1010 ~ 23
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless5 ~ 12h7120.005/015 ~ 603 ~ 300.5 ~ 1012 ~ 24
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless6 ~ 13h7130.005/015 ~ 605 ~ 300.5 ~ 1013 ~ 26
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless10 ~ 16h7160.005/015 ~ 605 ~ 300.5 ~ 1016 ~ 32
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless13 ~ 20h7200.005/015 ~ 605 ~ 300.5 ~ 1020 ~ 40
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless1 ~ 2m620.005/015 ~ 602 ~ 100.5 ~ 102 ~ 5
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless1 ~ 3m630.005/015 ~ 602 ~ 100.5 ~ 103 ~ 10
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless1.5 ~ 4m640.005/015 ~ 602 ~ 100.5 ~ 104 ~ 10
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless2 ~ 5m650.005/015 ~ 602 ~ 150.5 ~ 105 ~ 10
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless2 ~ 6m660.005/015 ~ 602 ~ 150.5 ~ 106 ~ 17
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless3 ~ 8m680.005/015 ~ 602 ~ 200.5 ~ 108 ~ 21
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless3 ~ 10m6100.005/015 ~ 603 ~ 200.5 ~ 1010 ~ 23
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless5 ~ 12m6120.005/015 ~ 603 ~ 300.5 ~ 1012 ~ 24
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless6 ~ 13m6130.005/015 ~ 605 ~ 300.5 ~ 1013 ~ 26
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless10 ~ 16m6160.005/015 ~ 605 ~ 300.5 ~ 1016 ~ 32
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless13 ~ 20m6200.005/015 ~ 605 ~ 300.5 ~ 1020 ~ 40
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless1 ~ 2p620.005/015 ~ 602 ~ 100.5 ~ 102 ~ 5
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless1 ~ 3p630.005/015 ~ 602 ~ 100.5 ~ 103 ~ 10
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless1.5 ~ 4p640.005/015 ~ 602 ~ 100.5 ~ 104 ~ 10
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless2 ~ 5p650.005/015 ~ 602 ~ 150.5 ~ 105 ~ 10
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless2 ~ 6p660.005/015 ~ 602 ~ 150.5 ~ 106 ~ 17

Loading...

 

Basic Information

Basic Shape Small Head Insertion Guide Tip Type Tapered Insertion Guide Specifications Not Provided
Mounting Side Shape Straight (Press-Fit)

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)