(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Height Adjusting Pins - Counterbored

Height Adjusting Pins - Counterbored

- Height Adjusting Pins – Counterbored from MISUMI.
- Small Head, Tapered, with each dimension configurable. The tolerances on both ends and the tapered dimensions are also configurable.
- The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Polished, centering hole is sometimes not available for SUS304.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- Hard Chrome Plating products are not available in Precision Grade Tolerance.

Locating Pins - Small Head, Tapered, Taper Angle, D and P Selectable Tolerance - Tapped:Related Image

[ ! ]SUS440C or 13Cr stainless has an identification groove at any position on D part.
[ ! ]Polishing and centering hole sometimes not available for SUS304.
[ ! ]P-2EtanA≥0.73 (Tip dia. Ø0.73 or more)
 Reference: tan15°≈0.267 tan30°≈0.577
tan45°=1 tan60°≈1.732
 
Material
No.
[ M ]Material[ S ]Surface Treatment[ H ]HardnessType
RoundDiamond
(1)SKS3 Equivalent-Treated Hardness: 60~63HRCKFSTAKFSTD
(2)SKS3 EquivalentHard Chrome PlatingTreated Hardness: 50~55HRC
Plating Hardness: 750HV~
GKFSTAGKFSTD
(4)SUS304--SKFSTASKFSTD
(5)SUS304Hard Chrome PlatingPlating Hardness: 750HV~HKFSTAHKFSTD
(6)SUS440C or 13Cr stainless-Treated Hardness: 50~55HRCCKFSTACKFSTD

Specifications

Part Number-P-L-B-E-A
 
Type Shape D Tol. P Tol. D
KFST A G S 10-P8.00-L12-B8.0-E3.0-A30

■Tolerance Selection
D
or
P
Standard Grade
MPGHS
m6p6g6h7-
3.00+0.008
+0.002
+0.012
+0.006
-0.002
-0.008
0
-0.010
0
-0.01
3.01
~
6.00
+0.012
+0.004
+0.020
+0.012
-0.004
-0.012
0
-0.012
6.01
~
10.00
+0.015
+0.006
+0.024
+0.015
-0.005
-0.014
0
-0.015
10.01
~
18.00
+0.018
+0.007
+0.029
+0.018
-0.006
-0.017
0
-0.018
18.01
~
20.00
+0.021
+0.008
+0.035
+0.022
-0.007
-0.020
0
-0.021
[ ! ]The unit price of Precision Type is the price of Standard Type multiplied by 1.1.
[ NG ]Hard Chrome Plating products are not available in Precision Grade Tolerance.

■Tapped
Part NumberP
0.01mm Increment
L
1mm Increment
B
0.1mm Increment
E
0.1mm Increment
A Selection(W)M (Coarse)* Tightening
Torque
N • cm
Round Shape Unit PriceDiamond Shape Unit Price
TypeShapeD Tolerance SelectionP Tolerance SelectionD(1)
KFSTA
(2)
GKFSTA
(4)
SKFSTA
(5)
HKFSTA
(6)
CKFSTA
(1)
KFSTD
(2)
GKFSTD
(4)
SKFSTD
(5)
HKFSTD
(6)
CKFSTD
KFST
GKFST
SKFST
HKFST
CKFST
A
(Round)


D
(Diamond)
M
P
G
H
S
M
P
G
H
53.00~5.008~102.0~15.0(10.0)0.5
~
10.0
15

30

45

60
1.2M2-3        --
64.00~6.008(9)~172.0~15.01.5M3  985          
6T1.5M2.6-4          
86.00~8.0011(12)~212.0~30.0(15.0)1.8M5 4618          
8T1.8M4 2256          
107.00~10.0011(12)~233.0~30.0(25.0)2.2M5 4618          
127.00~12.0012~243.0~30.0(25.0)2.5M5 4618          
138.00~13.0013(14)~265.0~30.0(25.0)3M8191110          
1610.00~16.0016~325.0~30.04M8191112          
2013.00~20.0020~405.0~30.05M8191112          
[ ! ]L dimension and B dimension in ( ) are applicable to Diamond Shape. [ ! ]Pins of D dimension with T have one size smaller thread diameter and larger wall thickness. (Actual D dimension is the number without "T".)
[ ! ]Note the strength of under-head part >> P.1618. [ ! ]Please confirm Pilot Hole Depth (P.1618). Holes may go through.
*The tightening torque (ref. value) for hardened products is strength class 8.8. (See technical data on >>P.2365.) Not applicable when using locking materials or lock washers.

Alterations

Locating Pins - Small Head, Tapered, Taper Angle, D and P Selectable Tolerance - Tapped:Related Image

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
CKFSTAGG5-P[3-5/0.01]-L[8-10/1]-B[2-10/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSTAGG6-P[4-6/0.01]-L[8-17/1]-B[2-15/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSTAGG6T-P[4-6/0.01]-L[8-17/1]-B[2-15/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSTAGG8-P[6-8/0.01]-L[11-21/1]-B[2-15/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSTAGG8T-P[6-8/0.01]-L[11-21/1]-B[2-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSTAGG10-P[7-10/0.01]-L[11-23/1]-B[3-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSTAGG12-P[7-12/0.01]-L[12-24/1]-B[3-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSTAGG13-P[8-13/0.01]-L[13-26/1]-B[5-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSTAGG16-P[10-16/0.01]-L[16-32/1]-B[5-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSTAGG20-P[13-20/0.01]-L[20-40/1]-B[5-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSTAGH5-P[3-5/0.01]-L[8-10/1]-B[2-10/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSTAGH6-P[4-6/0.01]-L[8-17/1]-B[2-15/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSTAGH6T-P[4-6/0.01]-L[8-17/1]-B[2-15/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSTAGH8-P[6-8/0.01]-L[11-21/1]-B[2-15/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSTAGH8T-P[6-8/0.01]-L[11-21/1]-B[2-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSTAGH10-P[7-10/0.01]-L[11-23/1]-B[3-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSTAGH12-P[7-12/0.01]-L[12-24/1]-B[3-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSTAGH13-P[8-13/0.01]-L[13-26/1]-B[5-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSTAGH16-P[10-16/0.01]-L[16-32/1]-B[5-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSTAGH20-P[13-20/0.01]-L[20-40/1]-B[5-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSTAGM5-P[3-5/0.01]-L[8-10/1]-B[2-10/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSTAGM6-P[4-6/0.01]-L[8-17/1]-B[2-15/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSTAGM6T-P[4-6/0.01]-L[8-17/1]-B[2-15/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSTAGM8-P[6-8/0.01]-L[11-21/1]-B[2-15/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSTAGM8T-P[6-8/0.01]-L[11-21/1]-B[2-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSTAGM10-P[7-10/0.01]-L[11-23/1]-B[3-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSTAGM12-P[7-12/0.01]-L[12-24/1]-B[3-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSTAGM13-P[8-13/0.01]-L[13-26/1]-B[5-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSTAGM16-P[10-16/0.01]-L[16-32/1]-B[5-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSTAGM20-P[13-20/0.01]-L[20-40/1]-B[5-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSTAGP5-P[3-5/0.01]-L[8-10/1]-B[2-10/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSTAGP6-P[4-6/0.01]-L[8-17/1]-B[2-15/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSTAGP6T-P[4-6/0.01]-L[8-17/1]-B[2-15/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSTAGP8-P[6-8/0.01]-L[11-21/1]-B[2-15/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSTAGP8T-P[6-8/0.01]-L[11-21/1]-B[2-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSTAGP10-P[7-10/0.01]-L[11-23/1]-B[3-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSTAGP12-P[7-12/0.01]-L[12-24/1]-B[3-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSTAGP13-P[8-13/0.01]-L[13-26/1]-B[5-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSTAGP16-P[10-16/0.01]-L[16-32/1]-B[5-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSTAGP20-P[13-20/0.01]-L[20-40/1]-B[5-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSTAGS5-P[3-5/0.01]-L[8-10/1]-B[2-10/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSTAGS6-P[4-6/0.01]-L[8-17/1]-B[2-15/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSTAGS6T-P[4-6/0.01]-L[8-17/1]-B[2-15/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSTAGS8-P[6-8/0.01]-L[11-21/1]-B[2-15/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSTAGS8T-P[6-8/0.01]-L[11-21/1]-B[2-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSTAGS10-P[7-10/0.01]-L[11-23/1]-B[3-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSTAGS12-P[7-12/0.01]-L[12-24/1]-B[3-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSTAGS13-P[8-13/0.01]-L[13-26/1]-B[5-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSTAGS16-P[10-16/0.01]-L[16-32/1]-B[5-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSTAGS20-P[13-20/0.01]-L[20-40/1]-B[5-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSTAHG5-P[3-5/0.01]-L[8-10/1]-B[2-10/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSTAHG6-P[4-6/0.01]-L[8-17/1]-B[2-15/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSTAHG6T-P[4-6/0.01]-L[8-17/1]-B[2-15/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSTAHG8-P[6-8/0.01]-L[11-21/1]-B[2-15/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSTAHG8T-P[6-8/0.01]-L[11-21/1]-B[2-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSTAHG10-P[7-10/0.01]-L[11-23/1]-B[3-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSTAHG12-P[7-12/0.01]-L[12-24/1]-B[3-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSTAHG13-P[8-13/0.01]-L[13-26/1]-B[5-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSTAHG16-P[10-16/0.01]-L[16-32/1]-B[5-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
CKFSTAHG20-P[13-20/0.01]-L[20-40/1]-B[5-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSInsertion Guide Tip Shape Surface Treatment Heat Treatment Material Locating Side Outer Dia. P (Ø)
(mm)
Locating Side O.D. Tolerance Mounting Side Outer Dia. D
(Ø)
Mounting Side Tolerance Screw Dia. M
(mm)
A
(°)
B
(mm)
E
(mm)
L
(mm)
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless3 ~ 5g65g6-15 ~ 602 ~ 100.5 ~ 108 ~ 10
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless4 ~ 6g66g6315 ~ 602 ~ 150.5 ~ 108 ~ 17
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless4 ~ 6g66Tg62.615 ~ 602 ~ 150.5 ~ 108 ~ 17
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless6 ~ 8g68g6515 ~ 602 ~ 150.5 ~ 1011 ~ 21
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless6 ~ 8g68Tg6415 ~ 602 ~ 300.5 ~ 1011 ~ 21
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless7 ~ 10g610g6-15 ~ 603 ~ 300.5 ~ 1011 ~ 23
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless7 ~ 12g612g6-15 ~ 603 ~ 300.5 ~ 1012 ~ 24
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless8 ~ 13g613g6-15 ~ 605 ~ 300.5 ~ 1013 ~ 26
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless10 ~ 16g616g6-15 ~ 605 ~ 300.5 ~ 1016 ~ 32
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless13 ~ 20g620g6-15 ~ 605 ~ 300.5 ~ 1020 ~ 40
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless3 ~ 5h75g6-15 ~ 602 ~ 100.5 ~ 108 ~ 10
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless4 ~ 6h76g6315 ~ 602 ~ 150.5 ~ 108 ~ 17
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless4 ~ 6h76Tg62.615 ~ 602 ~ 150.5 ~ 108 ~ 17
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless6 ~ 8h78g6515 ~ 602 ~ 150.5 ~ 1011 ~ 21
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless6 ~ 8h78Tg6415 ~ 602 ~ 300.5 ~ 1011 ~ 21
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless7 ~ 10h710g6-15 ~ 603 ~ 300.5 ~ 1011 ~ 23
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless7 ~ 12h712g6-15 ~ 603 ~ 300.5 ~ 1012 ~ 24
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless8 ~ 13h713g6-15 ~ 605 ~ 300.5 ~ 1013 ~ 26
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless10 ~ 16h716g6-15 ~ 605 ~ 300.5 ~ 1016 ~ 32
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless13 ~ 20h720g6-15 ~ 605 ~ 300.5 ~ 1020 ~ 40
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless3 ~ 5m65g6-15 ~ 602 ~ 100.5 ~ 108 ~ 10
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless4 ~ 6m66g6315 ~ 602 ~ 150.5 ~ 108 ~ 17
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless4 ~ 6m66Tg62.615 ~ 602 ~ 150.5 ~ 108 ~ 17
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless6 ~ 8m68g6515 ~ 602 ~ 150.5 ~ 1011 ~ 21
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless6 ~ 8m68Tg6415 ~ 602 ~ 300.5 ~ 1011 ~ 21
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless7 ~ 10m610g6-15 ~ 603 ~ 300.5 ~ 1011 ~ 23
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless7 ~ 12m612g6-15 ~ 603 ~ 300.5 ~ 1012 ~ 24
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless8 ~ 13m613g6-15 ~ 605 ~ 300.5 ~ 1013 ~ 26
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless10 ~ 16m616g6-15 ~ 605 ~ 300.5 ~ 1016 ~ 32
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless13 ~ 20m620g6-15 ~ 605 ~ 300.5 ~ 1020 ~ 40
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless3 ~ 5p65g6-15 ~ 602 ~ 100.5 ~ 108 ~ 10
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless4 ~ 6p66g6315 ~ 602 ~ 150.5 ~ 108 ~ 17
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless4 ~ 6p66Tg62.615 ~ 602 ~ 150.5 ~ 108 ~ 17
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless6 ~ 8p68g6515 ~ 602 ~ 150.5 ~ 1011 ~ 21
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless6 ~ 8p68Tg6415 ~ 602 ~ 300.5 ~ 1011 ~ 21
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless7 ~ 10p610g6-15 ~ 603 ~ 300.5 ~ 1011 ~ 23
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless7 ~ 12p612g6-15 ~ 603 ~ 300.5 ~ 1012 ~ 24
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless8 ~ 13p613g6-15 ~ 605 ~ 300.5 ~ 1013 ~ 26
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless10 ~ 16p616g6-15 ~ 605 ~ 300.5 ~ 1016 ~ 32
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless13 ~ 20p620g6-15 ~ 605 ~ 300.5 ~ 1020 ~ 40
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless3 ~ 50/-0.015g6-15 ~ 602 ~ 100.5 ~ 108 ~ 10
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless4 ~ 60/-0.016g6315 ~ 602 ~ 150.5 ~ 108 ~ 17
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless4 ~ 60/-0.016Tg62.615 ~ 602 ~ 150.5 ~ 108 ~ 17
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless6 ~ 80/-0.018g6515 ~ 602 ~ 150.5 ~ 1011 ~ 21
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless6 ~ 80/-0.018Tg6415 ~ 602 ~ 300.5 ~ 1011 ~ 21
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless7 ~ 100/-0.0110g6-15 ~ 603 ~ 300.5 ~ 1011 ~ 23
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless7 ~ 120/-0.0112g6-15 ~ 603 ~ 300.5 ~ 1012 ~ 24
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless8 ~ 130/-0.0113g6-15 ~ 605 ~ 300.5 ~ 1013 ~ 26
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless10 ~ 160/-0.0116g6-15 ~ 605 ~ 300.5 ~ 1016 ~ 32
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless13 ~ 200/-0.0120g6-15 ~ 605 ~ 300.5 ~ 1020 ~ 40
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless3 ~ 5g65h7-15 ~ 602 ~ 100.5 ~ 108 ~ 10
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless4 ~ 6g66h7315 ~ 602 ~ 150.5 ~ 108 ~ 17
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless4 ~ 6g66Th72.615 ~ 602 ~ 150.5 ~ 108 ~ 17
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless6 ~ 8g68h7515 ~ 602 ~ 150.5 ~ 1011 ~ 21
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless6 ~ 8g68Th7415 ~ 602 ~ 300.5 ~ 1011 ~ 21
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless7 ~ 10g610h7-15 ~ 603 ~ 300.5 ~ 1011 ~ 23
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless7 ~ 12g612h7-15 ~ 603 ~ 300.5 ~ 1012 ~ 24
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless8 ~ 13g613h7-15 ~ 605 ~ 300.5 ~ 1013 ~ 26
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless10 ~ 16g616h7-15 ~ 605 ~ 300.5 ~ 1016 ~ 32
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Stainless Steel] SUS440C or 13Cr stainless13 ~ 20g620h7-15 ~ 605 ~ 300.5 ~ 1020 ~ 40

Loading...

 

Basic Information

Basic Shape Small Head Insertion Guide Tip Type Tapered Insertion Guide Specifications Not Provided
Mounting Side Shape Tapped

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)