(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Locating Pins - Sphere Large/Small Head (Set Screw-Notch Shape)

Locating Pins - Sphere Large/Small Head (Set Screw-Notch Shape)

- Locating Pins - Sphere Large/Small Head (Set Screw-Notch Shape) from MISUMI.
- Large Head/Small Head, Tapered, Set Screw Type. Selectable from Circumference Groove, Notched and Set Screw Flat Shapes.
- Insertion guide tip shape can be selected 2 types, round, and diamond.
- The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- When the P dimension is small, a centering hole will cause the sphere section to become small.
- The spherical head may be polished.

Locating Pins - Sphere Large/Small Head - Notch Shape:Related Image

[ ! ]When the P dimension is small, a centering hole will cause the sphere section to become small.
[ ! ]The spherical head may be polished.
 
Material No.[ M ]Material[ S ]
Surface Treatment
[ H ]HardnessType
RoundDiamond
(1)SKS3 Equivalent-Treated Hardness: 60~63HRCJPCQSJPCQD
(2)SKS3 EquivalentHard Chrome PlatingTreated Hardness: 50~55HRC
Plating Hardness: 750HV~
GJPCQSGJPCQD
(3)SUS304--SJPCQSSJPCQD

Specifications

Part Number-P-L-B-Flat Position
JPCQD10-P12.00-L16-B5.5-Y

■Notch Shape
Part NumberP
0.01mm Increment
L
1mm Increment
B
0.1mm Increment
Flat Position34hCApplicable Set Screw(W)
TypeShapeDD dim. Tolerance g6When D<PWhen D≥P
(Notched)
JPCQ
GJPCQ
SJPCQ
S (Round)
D (Diamond)
6-0.004
-0.012
5.00~10.0012~205.0~20.0(15.0)X
Y


[ ! ]Applicable to Diamond Shape Type only.
5.52.511M431.5
8-0.005
-0.014
5.00~13.0014~225.0~30.0(15.0)7.53.51.21.5M53.51.8
10-0.005
-0.014
5.00~15.0015~255.0~30.0(15.0)7.53.51.22M642.2
12-0.006
-0.017
5.00~16.0015~257.53.51.22M652.5
16-0.006
-0.017
10.00~25.0024~355.0~30.010.55.523M874
20-0.007
-0.020
13.00~30.0027~4013.58.523M895
[ ! ]B dimension in ( ) is applicable to Diamond Shape. [ ! ]Applicable set screws in the table are the recommended sizes for Notch Shape.

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
GJPCQD6-P[5-10/0.01]-L[12-20/1]-B[5-20/0.1]-[X,​Y]
GJPCQD8-P[5-13/0.01]-L[14-22/1]-B[5-15/0.1]-[X,​Y]
GJPCQD10-P[5-15/0.01]-L[15-25/1]-B[5-15/0.1]-[X,​Y]
GJPCQD12-P[5-16/0.01]-L[15-25/1]-B[5-15/0.1]-[X,​Y]
GJPCQD16-P[10-25/0.01]-L[24-35/1]-B[5-30/0.1]-[X,​Y]
GJPCQD20-P[13-30/0.01]-L[27-40/1]-B[5-30/0.1]-[X,​Y]
GJPCQS6-P[5-10/0.01]-L[12-20/1]-B[5-20/0.1]
GJPCQS8-P[5-13/0.01]-L[14-22/1]-B[5-30/0.1]
GJPCQS10-P[5-15/0.01]-L[15-25/1]-B[5-30/0.1]
GJPCQS12-P[5-16/0.01]-L[15-25/1]-B[5-30/0.1]
GJPCQS16-P[10-25/0.01]-L[24-35/1]-B[5-30/0.1]
GJPCQS20-P[13-30/0.01]-L[27-40/1]-B[5-30/0.1]
JPCQD6-P[5-10/0.01]-L[12-20/1]-B[5-15/0.1]-[X,​Y]
JPCQD8-P[5-13/0.01]-L[14-22/1]-B[5-15/0.1]-[X,​Y]
JPCQD10-P[5-15/0.01]-L[15-25/1]-B[5-15/0.1]-[X,​Y]
JPCQD12-P[5-16/0.01]-L[15-25/1]-B[5-15/0.1]-[X,​Y]
JPCQD16-P[10-25/0.01]-L[24-35/1]-B[5-30/0.1]-[X,​Y]
JPCQD20-P[13-30/0.01]-L[27-40/1]-B[5-30/0.1]-[X,​Y]
JPCQS6-P[5-10/0.01]-L[12-20/1]-B[5-20/0.1]
JPCQS8-P[5-13/0.01]-L[14-22/1]-B[5-30/0.1]
JPCQS10-P[5-15/0.01]-L[15-25/1]-B[5-30/0.1]
JPCQS12-P[5-16/0.01]-L[15-25/1]-B[5-30/0.1]
JPCQS16-P[10-25/0.01]-L[24-35/1]-B[5-30/0.1]
JPCQS20-P[13-30/0.01]-L[27-40/1]-B[5-30/0.1]
SJPCQD6-P[5-10/0.01]-L[12-20/1]-B[5-20/0.1]-[X,​Y]
SJPCQD8-P[5-13/0.01]-L[14-22/1]-B[5-15/0.1]-[X,​Y]
SJPCQD10-P[5-15/0.01]-L[15-25/1]-B[5-15/0.1]-[X,​Y]
SJPCQD12-P[5-16/0.01]-L[15-25/1]-B[5-15/0.1]-[X,​Y]
SJPCQD16-P[10-25/0.01]-L[24-35/1]-B[5-30/0.1]-[X,​Y]
SJPCQD20-P[13-30/0.01]-L[27-40/1]-B[5-30/0.1]-[X,​Y]
SJPCQS6-P[5-10/0.01]-L[12-20/1]-B[5-20/0.1]
SJPCQS8-P[5-13/0.01]-L[14-22/1]-B[5-20/0.1]
SJPCQS10-P[5-15/0.01]-L[15-25/1]-B[5-20/0.1]
SJPCQS12-P[5-16/0.01]-L[15-25/1]-B[5-20/0.1]
SJPCQS16-P[10-25/0.01]-L[24-35/1]-B[5-20/0.1]
SJPCQS20-P[13-30/0.01]-L[27-40/1]-B[5-20/0.1]
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSInsertion Guide Tip Shape Surface Treatment Heat Treatment Material Locating Side Outer Dia. P (Ø)
(mm)
Mounting Side Outer Dia. D
(Ø)
B
(mm)
Flat Position L
(mm)
1 Piece(s) 5 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingDirectly Quenching[Steel] SKS3 Equivalent5 ~ 1065 ~ 20X / Y12 ~ 20
1 Piece(s) 5 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingDirectly Quenching[Steel] SKS3 Equivalent5 ~ 1385 ~ 15X / Y14 ~ 22
1 Piece(s) 5 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingDirectly Quenching[Steel] SKS3 Equivalent5 ~ 15105 ~ 15X / Y15 ~ 25
1 Piece(s) 5 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingDirectly Quenching[Steel] SKS3 Equivalent5 ~ 16125 ~ 15X / Y15 ~ 25
1 Piece(s) 5 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingDirectly Quenching[Steel] SKS3 Equivalent10 ~ 25165 ~ 30X / Y24 ~ 35
1 Piece(s) 5 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingDirectly Quenching[Steel] SKS3 Equivalent13 ~ 30205 ~ 30X / Y27 ~ 40
1 Piece(s) 5 Day(s) 10Round[Hard Chrome Plating] Hard Chrome PlatingDirectly Quenching[Steel] SKS3 Equivalent5 ~ 1065 ~ 20-12 ~ 20
1 Piece(s) 5 Day(s) 10Round[Hard Chrome Plating] Hard Chrome PlatingDirectly Quenching[Steel] SKS3 Equivalent5 ~ 1385 ~ 30-14 ~ 22
1 Piece(s) 5 Day(s) 10Round[Hard Chrome Plating] Hard Chrome PlatingDirectly Quenching[Steel] SKS3 Equivalent5 ~ 15105 ~ 30-15 ~ 25
1 Piece(s) 5 Day(s) 10Round[Hard Chrome Plating] Hard Chrome PlatingDirectly Quenching[Steel] SKS3 Equivalent5 ~ 16125 ~ 30-15 ~ 25
1 Piece(s) 5 Day(s) 10Round[Hard Chrome Plating] Hard Chrome PlatingDirectly Quenching[Steel] SKS3 Equivalent10 ~ 25165 ~ 30-24 ~ 35
1 Piece(s) 5 Day(s) 10Round[Hard Chrome Plating] Hard Chrome PlatingDirectly Quenching[Steel] SKS3 Equivalent13 ~ 30205 ~ 30-27 ~ 40
1 Piece(s) 4 Day(s) 10DiamondNot ProvidedDirectly Quenching[Steel] SKS3 Equivalent5 ~ 1065 ~ 15X / Y12 ~ 20
1 Piece(s) 4 Day(s) 10DiamondNot ProvidedDirectly Quenching[Steel] SKS3 Equivalent5 ~ 1385 ~ 15X / Y14 ~ 22
1 Piece(s) 4 Day(s) 10DiamondNot ProvidedDirectly Quenching[Steel] SKS3 Equivalent5 ~ 15105 ~ 15X / Y15 ~ 25
1 Piece(s) 4 Day(s) 10DiamondNot ProvidedDirectly Quenching[Steel] SKS3 Equivalent5 ~ 16125 ~ 15X / Y15 ~ 25
1 Piece(s) 4 Day(s) 10DiamondNot ProvidedDirectly Quenching[Steel] SKS3 Equivalent10 ~ 25165 ~ 30X / Y24 ~ 35
1 Piece(s) 4 Day(s) 10DiamondNot ProvidedDirectly Quenching[Steel] SKS3 Equivalent13 ~ 30205 ~ 30X / Y27 ~ 40
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Steel] SKS3 Equivalent5 ~ 1065 ~ 20-12 ~ 20
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Steel] SKS3 Equivalent5 ~ 1385 ~ 30-14 ~ 22
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Steel] SKS3 Equivalent5 ~ 15105 ~ 30-15 ~ 25
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Steel] SKS3 Equivalent5 ~ 16125 ~ 30-15 ~ 25
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Steel] SKS3 Equivalent10 ~ 25165 ~ 30-24 ~ 35
1 Piece(s) 4 Day(s) 10RoundNot ProvidedDirectly Quenching[Steel] SKS3 Equivalent13 ~ 30205 ~ 30-27 ~ 40
1 Piece(s) 4 Day(s) 10DiamondNot ProvidedNot Provided[Stainless Steel] SUS3045 ~ 1065 ~ 20X / Y12 ~ 20
1 Piece(s) 4 Day(s) 10DiamondNot ProvidedNot Provided[Stainless Steel] SUS3045 ~ 1385 ~ 15X / Y14 ~ 22
1 Piece(s) 4 Day(s) 10DiamondNot ProvidedNot Provided[Stainless Steel] SUS3045 ~ 15105 ~ 15X / Y15 ~ 25
1 Piece(s) 4 Day(s) 10DiamondNot ProvidedNot Provided[Stainless Steel] SUS3045 ~ 16125 ~ 15X / Y15 ~ 25
1 Piece(s) 4 Day(s) 10DiamondNot ProvidedNot Provided[Stainless Steel] SUS30410 ~ 25165 ~ 30X / Y24 ~ 35
1 Piece(s) 4 Day(s) 10DiamondNot ProvidedNot Provided[Stainless Steel] SUS30413 ~ 30205 ~ 30X / Y27 ~ 40
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Stainless Steel] SUS3045 ~ 1065 ~ 20-12 ~ 20
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Stainless Steel] SUS3045 ~ 1385 ~ 20-14 ~ 22
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Stainless Steel] SUS3045 ~ 15105 ~ 20-15 ~ 25
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Stainless Steel] SUS3045 ~ 16125 ~ 20-15 ~ 25
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Stainless Steel] SUS30410 ~ 25165 ~ 20-24 ~ 35
1 Piece(s) 4 Day(s) 10RoundNot ProvidedNot Provided[Stainless Steel] SUS30413 ~ 30205 ~ 20-27 ~ 40

Loading...

  1. 1
 

Basic Information

Basic Shape Large Head / Small Head Insertion Guide Tip Type Spherical Insertion Guide Specifications Not Provided
Mounting Side Shape Notch Shape Locating Side O.D. Tolerance 0/-0.01 Mounting Side Tolerance g6

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)