(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Support Pins - Stepped, Configurable, Straight - Press Fit

Support Pins - Stepped, Configurable, Straight - Press Fit:Related Image
[ ! ]Q≤P-1  [ ! ]When K < Pitchx2, the incomplete threaded portion is included in Mx1.5.
[ ! ]SUS440C or 13Cr stainless has an identification groove at any position on D part.
[ ! ]SUS304 may not be polished and may have no centering hole.
 
[ M ]Material[ S ]Surface Treatment[ H ]HardnessType
Straight
Standard
①SKS3 Equivalent-Treated Hardness: 60 ~ 63HRCSHFJ
②SKS3 EquivalentHard Chrome PlatingHardness: 50 ~ 55HRC
Plating Hardness: 750HV ~
GSHFJ
③SUS304--SSHFJ
⑤SUS440C or 13Cr stainless-Treated Hardness: 50 ~ 55HRCCSHFJ

Specifications

Part Number-P-Q-K-L-B
SHFJ5-P6.0-Q4.50-K5-L30.55-B3.2
DHM (Coarse)M1
(Coarse Thread)
m
36M3-1
46M4-1
58M5-1
68M6M32
811M8M42
1013M10M53
1215M12M53
◆Tapped and Threaded Recommended Tightening Torque (Reference)
M (Coarse)Tightening Torque
N • cm
M3  98
M4 225
M5 461
M6 784
M81911
M103783
M126605
[ ! ]The tightening torque (ref. value) for hardened products is strength class 8.8. (See technical data on >> P.2297.) Not applicable when using locking materials or lock washers.
■Standard
Part NumberPQ
0.01mm Increment
K
1mm Increment
L
0.01mm Increment
B
0.1mm Increment
TypeD0.1mm Increment
StraightShouldered
Straight
SHFJ
GSHFJ
SSHFJ
CSHFJ
33.5~6.03.0~5.02.00~5.003~610.00~60.002.0~5.0
44.5~7.03.0~5.02.00~6.004~810.00~60.002.0~10.0
55.5~8.03.0~7.02.00~7.005~1010.00~60.002.0~10.0
66.5~10.05.0~7.04.00~9.006~1210.00~80.002.0~12.0
89.0~13.05.0~8.04.00~12.008~1610.00~80.002.0~15.0
1011.0~15.06.0~11.05.00~14.0010~2010.00~100.002.0~20.0
1213.0~16.06.0~13.05.00~15.0012~2410.00~100.002.0~20.0

Alterations

Support Pins - Stepped, Configurable, Straight - Press Fit:Related Image

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
CSHFJ3-P[3.5-6/0.1]-Q[2-5/0.01]-K[3-6/1]-L[10-60/0.01]-B[2-5/0.1]
CSHFJ4-P[4.5-7/0.1]-Q[2-6/0.01]-K[4-8/1]-L[10-60/0.01]-B[2-10/0.1]
CSHFJ5-P[5.5-8/0.1]-Q[2-7/0.01]-K[5-10/1]-L[10-60/0.01]-B[2-10/0.1]
CSHFJ6-P[6.5-10/0.1]-Q[4-9/0.01]-K[6-12/1]-L[10-80/0.01]-B[2-12/0.1]
CSHFJ8-P[9-13/0.1]-Q[4-12/0.01]-K[8-16/1]-L[10-80/0.01]-B[2-15/0.1]
CSHFJ10-P[11-15/0.1]-Q[5-14/0.01]-K[10-20/1]-L[10-100/0.01]-B[2-20/0.1]
CSHFJ12-P[13-16/0.1]-Q[5-15/0.01]-K[12-24/1]-L[10-100/0.01]-B[2-20/0.1]
GSHFJ3-P[3.5-6/0.1]-Q[2-5/0.01]-K[3-6/1]-L[10-60/0.01]-B[2-5/0.1]
GSHFJ4-P[4.5-7/0.1]-Q[2-6/0.01]-K[4-8/1]-L[10-60/0.01]-B[2-10/0.1]
GSHFJ5-P[5.5-8/0.1]-Q[2-7/0.01]-K[5-10/1]-L[10-60/0.01]-B[2-10/0.1]
GSHFJ6-P[6.5-10/0.1]-Q[4-9/0.01]-K[6-12/1]-L[10-80/0.01]-B[2-12/0.1]
GSHFJ8-P[9-13/0.1]-Q[4-12/0.01]-K[8-16/1]-L[10-80/0.01]-B[2-15/0.1]
GSHFJ10-P[11-15/0.1]-Q[5-14/0.01]-K[10-20/1]-L[10-100/0.01]-B[2-20/0.1]
GSHFJ12-P[13-16/0.1]-Q[5-15/0.01]-K[12-24/1]-L[10-100/0.01]-B[2-20/0.1]
SHFJ3-P[3.5-6/0.1]-Q[2-5/0.01]-K[3-6/1]-L[10-60/0.01]-B[2-5/0.1]
SHFJ4-P[4.5-7/0.1]-Q[2-6/0.01]-K[4-8/1]-L[10-60/0.01]-B[2-10/0.1]
SHFJ5-P[5.5-8/0.1]-Q[2-7/0.01]-K[5-10/1]-L[10-60/0.01]-B[2-10/0.1]
SHFJ6-P[6.5-10/0.1]-Q[4-9/0.01]-K[6-12/1]-L[10-80/0.01]-B[2-12/0.1]
SHFJ8-P[9-13/0.1]-Q[4-12/0.01]-K[8-16/1]-L[10-80/0.01]-B[2-15/0.1]
SHFJ10-P[11-15/0.1]-Q[5-14/0.01]-K[10-20/1]-L[10-100/0.01]-B[2-20/0.1]
SHFJ12-P[13-16/0.1]-Q[5-15/0.01]-K[12-24/1]-L[10-100/0.01]-B[2-20/0.1]
SSHFJ3-P[3.5-6/0.1]-Q[2-5/0.01]-K[3-6/1]-L[10-60/0.01]-B[2-5/0.1]
SSHFJ4-P[4.5-7/0.1]-Q[2-6/0.01]-K[4-8/1]-L[10-60/0.01]-B[2-10/0.1]
SSHFJ5-P[5.5-8/0.1]-Q[2-7/0.01]-K[5-10/1]-L[10-60/0.01]-B[2-10/0.1]
SSHFJ6-P[6.5-10/0.1]-Q[4-9/0.01]-K[6-12/1]-L[10-80/0.01]-B[2-12/0.1]
SSHFJ8-P[9-13/0.1]-Q[4-12/0.01]-K[8-16/1]-L[10-80/0.01]-B[2-15/0.1]
SSHFJ10-P[11-15/0.1]-Q[5-14/0.01]-K[10-20/1]-L[10-100/0.01]-B[2-20/0.1]
SSHFJ12-P[13-16/0.1]-Q[5-15/0.01]-K[12-24/1]-L[10-100/0.01]-B[2-20/0.1]
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSMaterial Surface Treatment
(Ø)
Hardening Hardness Outer Dia. D
(mm)
B
(mm)
K
(mm)
L
(mm)
P
(mm)
Q
(mm)
1 Piece(s) 10 Day(s) or more 10[Steel] SKS3 EquivalentNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC32 ~ 53 ~ 610 ~ 603.5 ~ 62 ~ 5
1 Piece(s) 10 Day(s) or more 10[Steel] SKS3 EquivalentNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC42 ~ 104 ~ 810 ~ 604.5 ~ 72 ~ 6
1 Piece(s) 10 Day(s) or more 10[Steel] SKS3 EquivalentNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC52 ~ 105 ~ 1010 ~ 605.5 ~ 82 ~ 7
1 Piece(s) 10 Day(s) or more 10[Stainless Steel] SUS304Not ProvidedProvidedTreated Hardness: 50 ~ 55HRC62 ~ 126 ~ 1210 ~ 806.5 ~ 104 ~ 9
1 Piece(s) 10 Day(s) or more 10[Steel] SKS3 EquivalentNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC82 ~ 158 ~ 1610 ~ 809 ~ 134 ~ 12
1 Piece(s) 10 Day(s) or more 10[Stainless Steel] SUS304Not ProvidedProvidedTreated Hardness: 50 ~ 55HRC102 ~ 2010 ~ 2010 ~ 10011 ~ 155 ~ 14
1 Piece(s) 10 Day(s) or more 10[Stainless Steel] SUS304Not ProvidedProvidedTreated Hardness: 50 ~ 55HRC122 ~ 2012 ~ 2410 ~ 10013 ~ 165 ~ 15
1 Piece(s) 12 Day(s) or more 10[Steel] SKS3 EquivalentHard Chrome PlatingProvidedTreated Hardness: 50 ~ 55HRC, Plating Hardness: 750HV ~32 ~ 53 ~ 610 ~ 603.5 ~ 62 ~ 5
1 Piece(s) 12 Day(s) or more 10[Steel] SKS3 EquivalentHard Chrome PlatingProvidedTreated Hardness: 50 ~ 55HRC, Plating Hardness: 750HV ~42 ~ 104 ~ 810 ~ 604.5 ~ 72 ~ 6
1 Piece(s) 12 Day(s) or more 10[Steel] SKS3 EquivalentHard Chrome PlatingProvidedTreated Hardness: 50 ~ 55HRC, Plating Hardness: 750HV ~52 ~ 105 ~ 1010 ~ 605.5 ~ 82 ~ 7
1 Piece(s) 12 Day(s) or more 10[Steel] SKS3 EquivalentHard Chrome PlatingProvidedTreated Hardness: 50 ~ 55HRC, Plating Hardness: 750HV ~62 ~ 126 ~ 1210 ~ 806.5 ~ 104 ~ 9
1 Piece(s) 12 Day(s) or more 10[Steel] SKS3 EquivalentHard Chrome PlatingProvidedTreated Hardness: 50 ~ 55HRC, Plating Hardness: 750HV ~82 ~ 158 ~ 1610 ~ 809 ~ 134 ~ 12
1 Piece(s) 12 Day(s) or more 10[Steel] SKS3 EquivalentHard Chrome PlatingProvidedTreated Hardness: 50 ~ 55HRC, Plating Hardness: 750HV ~102 ~ 2010 ~ 2010 ~ 10011 ~ 155 ~ 14
1 Piece(s) 12 Day(s) or more 10[Steel] SKS3 EquivalentHard Chrome PlatingProvidedTreated Hardness: 50 ~ 55HRC, Plating Hardness: 750HV ~122 ~ 2012 ~ 2410 ~ 10013 ~ 165 ~ 15
1 Piece(s) 10 Day(s) or more 10[Stainless Steel] SUS304Not ProvidedProvidedTreated Hardness: 60 ~ 63HRC32 ~ 53 ~ 610 ~ 603.5 ~ 62 ~ 5
1 Piece(s) 10 Day(s) or more 10[Stainless Steel] SUS304Not ProvidedProvidedTreated Hardness: 60 ~ 63HRC42 ~ 104 ~ 810 ~ 604.5 ~ 72 ~ 6
1 Piece(s) 10 Day(s) or more 10[Stainless Steel] SUS304Not ProvidedProvidedTreated Hardness: 60 ~ 63HRC52 ~ 105 ~ 1010 ~ 605.5 ~ 82 ~ 7
1 Piece(s) 10 Day(s) or more 10[Stainless Steel] SUS304Not ProvidedProvidedTreated Hardness: 60 ~ 63HRC62 ~ 126 ~ 1210 ~ 806.5 ~ 104 ~ 9
1 Piece(s) 10 Day(s) or more 10[Stainless Steel] SUS304Not ProvidedProvidedTreated Hardness: 60 ~ 63HRC82 ~ 158 ~ 1610 ~ 809 ~ 134 ~ 12
1 Piece(s) 10 Day(s) or more 10[Stainless Steel] SUS304Not ProvidedProvidedTreated Hardness: 60 ~ 63HRC102 ~ 2010 ~ 2010 ~ 10011 ~ 155 ~ 14
1 Piece(s) 10 Day(s) or more 10[Stainless Steel] SUS304Not ProvidedProvidedTreated Hardness: 60 ~ 63HRC122 ~ 2012 ~ 2410 ~ 10013 ~ 165 ~ 15
1 Piece(s) 9 Day(s) or more 10[Stainless Steel] SUS440C or 13Cr stainlessNot ProvidedNot ProvidedNot Provided32 ~ 53 ~ 610 ~ 603.5 ~ 62 ~ 5
1 Piece(s) 9 Day(s) or more 10[Stainless Steel] SUS440C or 13Cr stainlessNot ProvidedNot ProvidedNot Provided42 ~ 104 ~ 810 ~ 604.5 ~ 72 ~ 6
1 Piece(s) 9 Day(s) or more 10[Stainless Steel] SUS440C or 13Cr stainlessNot ProvidedNot ProvidedNot Provided52 ~ 105 ~ 1010 ~ 605.5 ~ 82 ~ 7
1 Piece(s) 9 Day(s) or more 10[Stainless Steel] SUS440C or 13Cr stainlessNot ProvidedNot ProvidedNot Provided62 ~ 126 ~ 1210 ~ 806.5 ~ 104 ~ 9
1 Piece(s) 9 Day(s) or more 10[Stainless Steel] SUS440C or 13Cr stainlessNot ProvidedNot ProvidedNot Provided82 ~ 158 ~ 1610 ~ 809 ~ 134 ~ 12
1 Piece(s) 9 Day(s) or more 10[Stainless Steel] SUS440C or 13Cr stainlessNot ProvidedNot ProvidedNot Provided102 ~ 2010 ~ 2010 ~ 10011 ~ 155 ~ 14
1 Piece(s) 9 Day(s) or more 10[Stainless Steel] SUS440C or 13Cr stainlessNot ProvidedNot ProvidedNot Provided122 ~ 2012 ~ 2410 ~ 10013 ~ 165 ~ 15

Loading...

  1. 1
 

Basic Information

Shape Support Pin Height Tolerance 0/+0.05 Mounting Type Press Fit
Tip Shape Tapered

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)