(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Strut Pin Tip Shape Selectable Type -Female Thread-

Support Pins - Tip Shape Selectable, Tapped:Related Image
Support Pins - Tip Shape Selectable, Tapped:Related Image
 
[ M ]Material[ S ]Surface Treatment[ H ]HardnessTapped
①S45CBlack Oxide-LSPA
②S45CHard Chrome PlatingPlating Hardness: 750HV ~LSPAR
③S45CBlack OxideTreated Hardness: 45 ~ 50HRCLSPAHB
④S45CHard Chrome PlatingTreated Hardness: 45 ~ 50HRC /
Plating Hardness: 750HV ~
LSPAHR
⑤SUS304--LSPASU
⑥SUS440C or 13Cr stainless-Treated Hardness: 50 ~ 55HRCLSPASC
[ ! ]SUS304 may not be polished and may have no centering hole.

Specifications

Part Number-L-P-B-E-A
LSPAA10-L20.01-P4.05-B5-E2.0-A15
◆Tapped, Threaded
Recommended Tightening Torque (Reference)
M (Coarse)Tightening Torque
N • cm
M3   98
M4  225
M5  461
M6  784
M8 1911
M10 3783
M12 6605
M1616366
M2032928
[ ! ]The tightening torque (ref. value) for hardened products is strength class 8.8. (See technical data on >> P.2297.) Not applicable when using locking materials or lock washers.
Part NumberL
0.01mm Increment
P
0.01mm Increment
B
0.1mm Increment
E
0.1mm Increment (Shape A only)
A
Selection (Shape A only)
R
(Shape C)
M1 (Coarse)W2
TypeTip ShapeD
Tapped
LSPA
LSPAR
LSPAHB
LSPAHR
LSPASU
LSPASC
A
B
C
610.00~50.003.00~4.002.0~12.00.5~10.015
30
45
60
1M358
83.00~6.002.0~15.01M378
1020.00~80.004.00~8.002.0~20.01.5M388
124.00~10.002.0~20.01.5M51010
155.00~10.002.0~25.02M51310
208.00~15.002.0~30.03M81710
2510.00~15.002.0~30.04M82010
[ ! ]Note the strength of undercut part for Tapped.>> P.1566

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
LSPAA6-L[10-50/0.01]-P[3-4/0.01]-B[2-12/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPAA8-L[10-50/0.01]-P[3-6/0.01]-B[2-15/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPAA10-L[20-80/0.01]-P[4-8/0.01]-B[2-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPAA12-L[20-80/0.01]-P[4-10/0.01]-B[2-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPAA15-L[20-80/0.01]-P[5-10/0.01]-B[2-25/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPAA20-L[20-80/0.01]-P[8-15/0.01]-B[2-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPAA25-L[20-80/0.01]-P[10-15/0.01]-B[2-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPAB6-L[10-50/0.01]-P[3-4/0.01]-B[2-12/0.1]
LSPAB8-L[10-50/0.01]-P[3-6/0.01]-B[2-15/0.1]
LSPAB10-L[20-80/0.01]-P[4-8/0.01]-B[2-20/0.1]
LSPAB12-L[20-80/0.01]-P[4-10/0.01]-B[2-20/0.1]
LSPAB15-L[20-80/0.01]-P[5-10/0.01]-B[2-25/0.1]
LSPAB20-L[20-80/0.01]-P[8-15/0.01]-B[2-30/0.1]
LSPAB25-L[20-80/0.01]-P[10-15/0.01]-B[2-30/0.1]
LSPAC6-L[10-50/0.01]-P[3-4/0.01]-B[2-12/0.1]
LSPAC8-L[10-50/0.01]-P[3-6/0.01]-B[2-15/0.1]
LSPAC10-L[20-80/0.01]-P[4-8/0.01]-B[2-20/0.1]
LSPAC12-L[20-80/0.01]-P[4-10/0.01]-B[2-20/0.1]
LSPAC15-L[20-80/0.01]-P[5-10/0.01]-B[2-25/0.1]
LSPAC20-L[20-80/0.01]-P[8-15/0.01]-B[2-30/0.1]
LSPAC25-L[20-80/0.01]-P[10-15/0.01]-B[2-30/0.1]
LSPAHBA6-L[10-50/0.01]-P[3-4/0.01]-B[2-12/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPAHBA8-L[10-50/0.01]-P[3-6/0.01]-B[2-15/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPAHBA10-L[20-80/0.01]-P[4-8/0.01]-B[2-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPAHBA12-L[20-80/0.01]-P[4-10/0.01]-B[2-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPAHBA15-L[20-80/0.01]-P[5-10/0.01]-B[2-25/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPAHBA20-L[20-80/0.01]-P[8-15/0.01]-B[2-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPAHBA25-L[20-80/0.01]-P[10-15/0.01]-B[2-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPAHBB6-L[10-50/0.01]-P[3-4/0.01]-B[2-12/0.1]
LSPAHBB8-L[10-50/0.01]-P[3-6/0.01]-B[2-15/0.1]
LSPAHBB10-L[20-80/0.01]-P[4-8/0.01]-B[2-20/0.1]
LSPAHBB12-L[20-80/0.01]-P[4-10/0.01]-B[2-20/0.1]
LSPAHBB15-L[20-80/0.01]-P[5-10/0.01]-B[2-25/0.1]
LSPAHBB20-L[20-80/0.01]-P[8-15/0.01]-B[2-30/0.1]
LSPAHBB25-L[20-80/0.01]-P[10-15/0.01]-B[2-30/0.1]
LSPAHBC6-L[10-50/0.01]-P[3-4/0.01]-B[2-12/0.1]
LSPAHBC8-L[10-50/0.01]-P[3-6/0.01]-B[2-15/0.1]
LSPAHBC10-L[20-80/0.01]-P[4-8/0.01]-B[2-20/0.1]
LSPAHBC12-L[20-80/0.01]-P[4-10/0.01]-B[2-20/0.1]
LSPAHBC15-L[20-80/0.01]-P[5-10/0.01]-B[2-25/0.1]
LSPAHBC20-L[20-80/0.01]-P[8-15/0.01]-B[2-30/0.1]
LSPAHBC25-L[20-80/0.01]-P[10-15/0.01]-B[2-30/0.1]
LSPAHRA6-L[10-50/0.01]-P[3-4/0.01]-B[2-12/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPAHRA8-L[10-50/0.01]-P[3-6/0.01]-B[2-15/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPAHRA10-L[20-80/0.01]-P[4-8/0.01]-B[2-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPAHRA12-L[20-80/0.01]-P[4-10/0.01]-B[2-20/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPAHRA15-L[20-80/0.01]-P[5-10/0.01]-B[2-25/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPAHRA20-L[20-80/0.01]-P[8-15/0.01]-B[2-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPAHRA25-L[20-80/0.01]-P[10-15/0.01]-B[2-30/0.1]-E[0.5-10/0.1]-A[15,​30,​45,​60]
LSPAHRB6-L[10-50/0.01]-P[3-4/0.01]-B[2-12/0.1]
LSPAHRB8-L[10-50/0.01]-P[3-6/0.01]-B[2-15/0.1]
LSPAHRB10-L[20-80/0.01]-P[4-8/0.01]-B[2-20/0.1]
LSPAHRB12-L[20-80/0.01]-P[4-10/0.01]-B[2-20/0.1]
LSPAHRB15-L[20-80/0.01]-P[5-10/0.01]-B[2-25/0.1]
LSPAHRB20-L[20-80/0.01]-P[8-15/0.01]-B[2-30/0.1]
LSPAHRB25-L[20-80/0.01]-P[10-15/0.01]-B[2-30/0.1]
LSPAHRC6-L[10-50/0.01]-P[3-4/0.01]-B[2-12/0.1]
LSPAHRC8-L[10-50/0.01]-P[3-6/0.01]-B[2-15/0.1]
LSPAHRC10-L[20-80/0.01]-P[4-8/0.01]-B[2-20/0.1]
LSPAHRC12-L[20-80/0.01]-P[4-10/0.01]-B[2-20/0.1]
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSTip Shape Material Surface Treatment
(Ø)
Hardening Hardness Outer Dia. D
(mm)
A
(°)
B
(mm)
E
(mm)
L
(mm)
P
(mm)
1 Piece(s) 10 Day(s) or more 10Tapered[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided615 ~ 602 ~ 120.5 ~ 1010 ~ 503 ~ 4
1 Piece(s) 10 Day(s) or more 10Tapered[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided815 ~ 602 ~ 150.5 ~ 1010 ~ 503 ~ 6
1 Piece(s) 10 Day(s) or more 10Tapered[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided1015 ~ 602 ~ 200.5 ~ 1020 ~ 804 ~ 8
1 Piece(s) 10 Day(s) or more 10Tapered[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided1215 ~ 602 ~ 200.5 ~ 1020 ~ 804 ~ 10
1 Piece(s) 10 Day(s) or more 10Tapered[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided1515 ~ 602 ~ 250.5 ~ 1020 ~ 805 ~ 10
1 Piece(s) 10 Day(s) or more 10Tapered[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided2015 ~ 602 ~ 300.5 ~ 1020 ~ 808 ~ 15
1 Piece(s) 10 Day(s) or more 10Tapered[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided2515 ~ 602 ~ 300.5 ~ 1020 ~ 8010 ~ 15
1 Piece(s) 10 Day(s) or more 10Spherical[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided6-2 ~ 12-10 ~ 503 ~ 4
1 Piece(s) 10 Day(s) or more 10Spherical[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided8-2 ~ 15-10 ~ 503 ~ 6
1 Piece(s) 10 Day(s) or more 10Spherical[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided10-2 ~ 20-20 ~ 804 ~ 8
1 Piece(s) 10 Day(s) or more 10Spherical[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided12-2 ~ 20-20 ~ 804 ~ 10
1 Piece(s) 10 Day(s) or more 10Spherical[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided15-2 ~ 25-20 ~ 805 ~ 10
1 Piece(s) 10 Day(s) or more 10Spherical[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided20-2 ~ 30-20 ~ 808 ~ 15
1 Piece(s) 10 Day(s) or more 10Spherical[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided25-2 ~ 30-20 ~ 8010 ~ 15
1 Piece(s) 10 Day(s) or more 10Taper R[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided6-2 ~ 12-10 ~ 503 ~ 4
1 Piece(s) 10 Day(s) or more 10Taper R[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided8-2 ~ 15-10 ~ 503 ~ 6
1 Piece(s) 10 Day(s) or more 10Taper R[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided10-2 ~ 20-20 ~ 804 ~ 8
1 Piece(s) 10 Day(s) or more 10Taper R[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided12-2 ~ 20-20 ~ 804 ~ 10
1 Piece(s) 10 Day(s) or more 10Taper R[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided15-2 ~ 25-20 ~ 805 ~ 10
1 Piece(s) 10 Day(s) or more 10Taper R[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided20-2 ~ 30-20 ~ 808 ~ 15
1 Piece(s) 10 Day(s) or more 10Taper R[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided25-2 ~ 30-20 ~ 8010 ~ 15
1 Piece(s) 10 Day(s) or more 10Tapered[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC615 ~ 602 ~ 120.5 ~ 1010 ~ 503 ~ 4
1 Piece(s) 10 Day(s) or more 10Tapered[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC815 ~ 602 ~ 150.5 ~ 1010 ~ 503 ~ 6
1 Piece(s) 10 Day(s) or more 10Tapered[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC1015 ~ 602 ~ 200.5 ~ 1020 ~ 804 ~ 8
1 Piece(s) 10 Day(s) or more 10Tapered[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC1215 ~ 602 ~ 200.5 ~ 1020 ~ 804 ~ 10
1 Piece(s) 10 Day(s) or more 10Tapered[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC1515 ~ 602 ~ 250.5 ~ 1020 ~ 805 ~ 10
1 Piece(s) 10 Day(s) or more 10Tapered[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC2015 ~ 602 ~ 300.5 ~ 1020 ~ 808 ~ 15
1 Piece(s) 10 Day(s) or more 10Tapered[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC2515 ~ 602 ~ 300.5 ~ 1020 ~ 8010 ~ 15
1 Piece(s) 10 Day(s) or more 10Spherical[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC6-2 ~ 12-10 ~ 503 ~ 4
1 Piece(s) 10 Day(s) or more 10Spherical[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC8-2 ~ 15-10 ~ 503 ~ 6
1 Piece(s) 10 Day(s) or more 10Spherical[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC10-2 ~ 20-20 ~ 804 ~ 8
1 Piece(s) 10 Day(s) or more 10Spherical[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC12-2 ~ 20-20 ~ 804 ~ 10
1 Piece(s) 10 Day(s) or more 10Spherical[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC15-2 ~ 25-20 ~ 805 ~ 10
1 Piece(s) 10 Day(s) or more 10Spherical[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC20-2 ~ 30-20 ~ 808 ~ 15
1 Piece(s) 10 Day(s) or more 10Spherical[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC25-2 ~ 30-20 ~ 8010 ~ 15
1 Piece(s) 10 Day(s) or more 10Taper R[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC6-2 ~ 12-10 ~ 503 ~ 4
1 Piece(s) 10 Day(s) or more 10Taper R[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC8-2 ~ 15-10 ~ 503 ~ 6
1 Piece(s) 10 Day(s) or more 10Taper R[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC10-2 ~ 20-20 ~ 804 ~ 8
1 Piece(s) 10 Day(s) or more 10Taper R[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC12-2 ~ 20-20 ~ 804 ~ 10
1 Piece(s) 10 Day(s) or more 10Taper R[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC15-2 ~ 25-20 ~ 805 ~ 10
1 Piece(s) 10 Day(s) or more 10Taper R[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC20-2 ~ 30-20 ~ 808 ~ 15
1 Piece(s) 10 Day(s) or more 10Taper R[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC25-2 ~ 30-20 ~ 8010 ~ 15
1 Piece(s) 10 Day(s) or more 10Tapered[Steel] S45C EquivalentHard Chrome PlatingProvidedTreated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~615 ~ 602 ~ 120.5 ~ 1010 ~ 503 ~ 4
1 Piece(s) 10 Day(s) or more 10Tapered[Steel] S45C EquivalentHard Chrome PlatingProvidedTreated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~815 ~ 602 ~ 150.5 ~ 1010 ~ 503 ~ 6
1 Piece(s) 10 Day(s) or more 10Tapered[Steel] S45C EquivalentHard Chrome PlatingProvidedTreated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~1015 ~ 602 ~ 200.5 ~ 1020 ~ 804 ~ 8
1 Piece(s) 10 Day(s) or more 10Tapered[Steel] S45C EquivalentHard Chrome PlatingProvidedTreated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~1215 ~ 602 ~ 200.5 ~ 1020 ~ 804 ~ 10
1 Piece(s) 10 Day(s) or more 10Tapered[Steel] S45C EquivalentHard Chrome PlatingProvidedTreated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~1515 ~ 602 ~ 250.5 ~ 1020 ~ 805 ~ 10
1 Piece(s) 10 Day(s) or more 10Tapered[Steel] S45C EquivalentHard Chrome PlatingProvidedTreated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~2015 ~ 602 ~ 300.5 ~ 1020 ~ 808 ~ 15
1 Piece(s) 10 Day(s) or more 10Tapered[Steel] S45C EquivalentHard Chrome PlatingProvidedTreated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~2515 ~ 602 ~ 300.5 ~ 1020 ~ 8010 ~ 15
1 Piece(s) 10 Day(s) or more 10Spherical[Steel] S45C EquivalentHard Chrome PlatingProvidedTreated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~6-2 ~ 12-10 ~ 503 ~ 4
1 Piece(s) 10 Day(s) or more 10Spherical[Steel] S45C EquivalentHard Chrome PlatingProvidedTreated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~8-2 ~ 15-10 ~ 503 ~ 6
1 Piece(s) 10 Day(s) or more 10Spherical[Steel] S45C EquivalentHard Chrome PlatingProvidedTreated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~10-2 ~ 20-20 ~ 804 ~ 8
1 Piece(s) 10 Day(s) or more 10Spherical[Steel] S45C EquivalentHard Chrome PlatingProvidedTreated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~12-2 ~ 20-20 ~ 804 ~ 10
1 Piece(s) 10 Day(s) or more 10Spherical[Steel] S45C EquivalentHard Chrome PlatingProvidedTreated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~15-2 ~ 25-20 ~ 805 ~ 10
1 Piece(s) 10 Day(s) or more 10Spherical[Steel] S45C EquivalentHard Chrome PlatingProvidedTreated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~20-2 ~ 30-20 ~ 808 ~ 15
1 Piece(s) 10 Day(s) or more 10Spherical[Steel] S45C EquivalentHard Chrome PlatingProvidedTreated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~25-2 ~ 30-20 ~ 8010 ~ 15
1 Piece(s) 10 Day(s) or more 10Taper R[Steel] S45C EquivalentHard Chrome PlatingProvidedTreated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~6-2 ~ 12-10 ~ 503 ~ 4
1 Piece(s) 10 Day(s) or more 10Taper R[Steel] S45C EquivalentHard Chrome PlatingProvidedTreated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~8-2 ~ 15-10 ~ 503 ~ 6
1 Piece(s) 10 Day(s) or more 10Taper R[Steel] S45C EquivalentHard Chrome PlatingProvidedTreated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~10-2 ~ 20-20 ~ 804 ~ 8
1 Piece(s) 10 Day(s) or more 10Taper R[Steel] S45C EquivalentHard Chrome PlatingProvidedTreated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~12-2 ~ 20-20 ~ 804 ~ 10

Loading...

 

Basic Information

Shape Support Pin Height Tolerance 0/+0.05 Mounting Type Tapped

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)