(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Hex Support Pins - Stepped -Threaded

Hex Support Pins - Stepped - Threaded:Related Image
[ ! ]When G<Pitch x2, the incomplete threaded portion (Pitch x2) is included in M x1.5. For Pitch Dia. > P.2292
 
[ M ]Material[ S ]Surface Treatment[ H ]HardnessType
Threaded
①S45CBlack Oxide-SRPCB
②S45CHard Chrome PlatingPlating Hardness: 750HV ~SRPCR
③S45CBlack OxideTreated Hardness: 45 ~ 50HRCSRPCHB
④S45CHard Chrome PlatingTreated Hardness: 45 ~ 50HRC
Plating Hardness: 750HV ~
SRPCHR
⑥SUS440C or 13Cr stainless-Treated Hardness: 50 ~ 55HRCSRPCC

Specifications

Part Number-L-P-F-G
   
Type B
SRPCB 10-L50.00-P5.98-F3.0-G5
◆Threaded Recommended Tightening Torque (Reference)
M (Coarse)Tightening Torque
N • cm
M3   98
M4  225
M5  461
M6  784
M8 1911
M10 3783
M12 6605
M1616366
M2032928
[ ! ]The tightening torque (ref. value) for hardened products is strength class 8.8. (See technical data on >> P.2297.) Not applicable when using locking materials or lock washers.
Part NumberL
0.01mm Increment
P
0.01mm Increment
F
0.1mm Increment
G
1mm Increment
m(C)dM (Coarse)
TypeB
Threaded only
Threaded
SRPCB
SRPCR
SRPCHB
SRPCHR
SRPCC
610.00~50.003.00~4.002.0~12.00
or
2≤G≤dx2
16.94M4
73.00~6.002.0~15.018.14M4
815.00~50.0019.25M5
1020.00~80.004.00~8.002.0~20.0211.55M5
124.00~10.00213.96M6
135.00~10.002.0~25.03156M6
14316.26M6
178.00~15.002.0~30.0319.68M8
19321.98M8
2410.00~15.00427.710M10
SUS440C or 13Cr stainless is B≥8.
For full thread, specify a G dimension of 0 and NNC alteration.

Alterations

Hex Support Pins - Stepped - Threaded:Related Image

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
SRPCB6-L[10-50/0.01]-P[3-4/0.01]-F[2-12/0.1]-G0
SRPCB6-L[10-50/0.01]-P[3-4/0.01]-F[2-12/0.1]-G[2-8/1]
SRPCB7-L[10-50/0.01]-P[3-6/0.01]-F[2-15/0.1]-G0
SRPCB7-L[10-50/0.01]-P[3-6/0.01]-F[2-15/0.1]-G[2-8/1]
SRPCB8-L[15-50/0.01]-P[3-6/0.01]-F[2-15/0.1]-G0
SRPCB8-L[15-50/0.01]-P[3-6/0.01]-F[2-15/0.1]-G[2-10/1]
SRPCB10-L[20-80/0.01]-P[4-8/0.01]-F[2-20/0.1]-G0
SRPCB10-L[20-80/0.01]-P[4-8/0.01]-F[2-20/0.1]-G[2-10/1]
SRPCB12-L[20-80/0.01]-P[4-10/0.01]-F[2-20/0.1]-G0
SRPCB12-L[20-80/0.01]-P[4-10/0.01]-F[2-20/0.1]-G[2-12/1]
SRPCB13-L[20-80/0.01]-P[5-10/0.01]-F[2-25/0.1]-G0
SRPCB13-L[20-80/0.01]-P[5-10/0.01]-F[2-25/0.1]-G[2-12/1]
SRPCB14-L[20-80/0.01]-P[5-10/0.01]-F[2-25/0.1]-G0
SRPCB14-L[20-80/0.01]-P[5-10/0.01]-F[2-25/0.1]-G[2-12/1]
SRPCB17-L[20-80/0.01]-P[8-15/0.01]-F[2-30/0.1]-G0
SRPCB17-L[20-80/0.01]-P[8-15/0.01]-F[2-30/0.1]-G[2-16/1]
SRPCB19-L[20-80/0.01]-P[8-15/0.01]-F[2-30/0.1]-G0
SRPCB19-L[20-80/0.01]-P[8-15/0.01]-F[2-30/0.1]-G[2-16/1]
SRPCB24-L[20-80/0.01]-P[10-15/0.01]-F[2-30/0.1]-G0
SRPCB24-L[20-80/0.01]-P[10-15/0.01]-F[2-30/0.1]-G[2-20/1]
SRPCC8-L[15-50/0.01]-P[3-6/0.01]-F[2-15/0.1]-G0
SRPCC8-L[15-50/0.01]-P[3-6/0.01]-F[2-15/0.1]-G[2-10/1]
SRPCC10-L[20-80/0.01]-P[4-8/0.01]-F[2-20/0.1]-G0
SRPCC10-L[20-80/0.01]-P[4-8/0.01]-F[2-20/0.1]-G[2-10/1]
SRPCC12-L[20-80/0.01]-P[4-10/0.01]-F[2-20/0.1]-G0
SRPCC12-L[20-80/0.01]-P[4-10/0.01]-F[2-20/0.1]-G[2-12/1]
SRPCC13-L[20-80/0.01]-P[5-10/0.01]-F[2-25/0.1]-G0
SRPCC13-L[20-80/0.01]-P[5-10/0.01]-F[2-25/0.1]-G[2-12/1]
SRPCC14-L[20-80/0.01]-P[5-10/0.01]-F[2-25/0.1]-G0
SRPCC14-L[20-80/0.01]-P[5-10/0.01]-F[2-25/0.1]-G[2-12/1]
SRPCC17-L[20-80/0.01]-P[8-15/0.01]-F[2-30/0.1]-G0
SRPCC17-L[20-80/0.01]-P[8-15/0.01]-F[2-30/0.1]-G[2-16/1]
SRPCC19-L[20-80/0.01]-P[8-15/0.01]-F[2-30/0.1]-G0
SRPCC19-L[20-80/0.01]-P[8-15/0.01]-F[2-30/0.1]-G[2-16/1]
SRPCC24-L[20-80/0.01]-P[10-15/0.01]-F[2-30/0.1]-G0
SRPCC24-L[20-80/0.01]-P[10-15/0.01]-F[2-30/0.1]-G[2-20/1]
SRPCHB6-L[10-50/0.01]-P[3-4/0.01]-F[2-12/0.1]-G0
SRPCHB6-L[10-50/0.01]-P[3-4/0.01]-F[2-12/0.1]-G[2-8/1]
SRPCHB7-L[10-50/0.01]-P[3-6/0.01]-F[2-15/0.1]-G0
SRPCHB7-L[10-50/0.01]-P[3-6/0.01]-F[2-15/0.1]-G[2-8/1]
SRPCHB8-L[15-50/0.01]-P[3-6/0.01]-F[2-15/0.1]-G0
SRPCHB8-L[15-50/0.01]-P[3-6/0.01]-F[2-15/0.1]-G[2-10/1]
SRPCHB10-L[20-80/0.01]-P[4-8/0.01]-F[2-20/0.1]-G0
SRPCHB10-L[20-80/0.01]-P[4-8/0.01]-F[2-20/0.1]-G[2-10/1]
SRPCHB12-L[20-80/0.01]-P[4-10/0.01]-F[2-20/0.1]-G0
SRPCHB12-L[20-80/0.01]-P[4-10/0.01]-F[2-20/0.1]-G[2-12/1]
SRPCHB13-L[20-80/0.01]-P[5-10/0.01]-F[2-25/0.1]-G0
SRPCHB13-L[20-80/0.01]-P[5-10/0.01]-F[2-25/0.1]-G[2-12/1]
SRPCHB14-L[20-80/0.01]-P[5-10/0.01]-F[2-25/0.1]-G0
SRPCHB14-L[20-80/0.01]-P[5-10/0.01]-F[2-25/0.1]-G[2-12/1]
SRPCHB17-L[20-80/0.01]-P[8-15/0.01]-F[2-30/0.1]-G0
SRPCHB17-L[20-80/0.01]-P[8-15/0.01]-F[2-30/0.1]-G[2-16/1]
SRPCHB19-L[20-80/0.01]-P[8-15/0.01]-F[2-30/0.1]-G0
SRPCHB19-L[20-80/0.01]-P[8-15/0.01]-F[2-30/0.1]-G[2-16/1]
SRPCHB24-L[20-80/0.01]-P[10-15/0.01]-F[2-30/0.1]-G0
SRPCHB24-L[20-80/0.01]-P[10-15/0.01]-F[2-30/0.1]-G[2-20/1]
SRPCHR6-L[10-50/0.01]-P[3-4/0.01]-F[2-12/0.1]-G0
SRPCHR6-L[10-50/0.01]-P[3-4/0.01]-F[2-12/0.1]-G[2-8/1]
SRPCHR7-L[10-50/0.01]-P[3-6/0.01]-F[2-15/0.1]-G0
SRPCHR7-L[10-50/0.01]-P[3-6/0.01]-F[2-15/0.1]-G[2-8/1]
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSMaterial Surface Treatment
(Ø)
Hardening Hardness Wrench Flats B
(mm)
F
(mm)
G
(mm)
L
(mm)
P
(mm)
1 Piece(s) 10 Day(s) or more 10[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided62 ~ 12010 ~ 503 ~ 4
1 Piece(s) 10 Day(s) or more 10[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided62 ~ 122 ~ 810 ~ 503 ~ 4
1 Piece(s) 10 Day(s) or more 10[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided72 ~ 15010 ~ 503 ~ 6
1 Piece(s) 10 Day(s) or more 10[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided72 ~ 152 ~ 810 ~ 503 ~ 6
1 Piece(s) 10 Day(s) or more 10[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided82 ~ 15015 ~ 503 ~ 6
1 Piece(s) 10 Day(s) or more 10[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided82 ~ 152 ~ 1015 ~ 503 ~ 6
1 Piece(s) 10 Day(s) or more 10[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided102 ~ 20020 ~ 804 ~ 8
1 Piece(s) 10 Day(s) or more 10[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided102 ~ 202 ~ 1020 ~ 804 ~ 8
1 Piece(s) 10 Day(s) or more 10[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided122 ~ 20020 ~ 804 ~ 10
1 Piece(s) 10 Day(s) or more 10[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided122 ~ 202 ~ 1220 ~ 804 ~ 10
1 Piece(s) 10 Day(s) or more 10[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided132 ~ 25020 ~ 805 ~ 10
1 Piece(s) 10 Day(s) or more 10[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided132 ~ 252 ~ 1220 ~ 805 ~ 10
1 Piece(s) 10 Day(s) or more 10[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided142 ~ 25020 ~ 805 ~ 10
1 Piece(s) 10 Day(s) or more 10[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided142 ~ 252 ~ 1220 ~ 805 ~ 10
1 Piece(s) 10 Day(s) or more 10[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided172 ~ 30020 ~ 808 ~ 15
1 Piece(s) 10 Day(s) or more 10[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided172 ~ 302 ~ 1620 ~ 808 ~ 15
1 Piece(s) 10 Day(s) or more 10[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided192 ~ 30020 ~ 808 ~ 15
1 Piece(s) 10 Day(s) or more 10[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided192 ~ 302 ~ 1620 ~ 808 ~ 15
1 Piece(s) 10 Day(s) or more 10[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided242 ~ 30020 ~ 8010 ~ 15
1 Piece(s) 10 Day(s) or more 10[Steel] S45C EquivalentBlack OxideNot ProvidedNot Provided242 ~ 302 ~ 2020 ~ 8010 ~ 15
1 Piece(s) 14 Day(s) or more 10[Stainless Steel] SUS440C or 13Cr stainlessNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC82 ~ 15015 ~ 503 ~ 6
1 Piece(s) 14 Day(s) or more 10[Stainless Steel] SUS440C or 13Cr stainlessNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC82 ~ 152 ~ 1015 ~ 503 ~ 6
1 Piece(s) 14 Day(s) or more 10[Stainless Steel] SUS440C or 13Cr stainlessNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC102 ~ 20020 ~ 804 ~ 8
1 Piece(s) 14 Day(s) or more 10[Stainless Steel] SUS440C or 13Cr stainlessNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC102 ~ 202 ~ 1020 ~ 804 ~ 8
1 Piece(s) 14 Day(s) or more 10[Stainless Steel] SUS440C or 13Cr stainlessNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC122 ~ 20020 ~ 804 ~ 10
1 Piece(s) 14 Day(s) or more 10[Stainless Steel] SUS440C or 13Cr stainlessNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC122 ~ 202 ~ 1220 ~ 804 ~ 10
1 Piece(s) 14 Day(s) or more 10[Stainless Steel] SUS440C or 13Cr stainlessNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC132 ~ 25020 ~ 805 ~ 10
1 Piece(s) 14 Day(s) or more 10[Stainless Steel] SUS440C or 13Cr stainlessNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC132 ~ 252 ~ 1220 ~ 805 ~ 10
1 Piece(s) 14 Day(s) or more 10[Stainless Steel] SUS440C or 13Cr stainlessNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC142 ~ 25020 ~ 805 ~ 10
1 Piece(s) 14 Day(s) or more 10[Stainless Steel] SUS440C or 13Cr stainlessNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC142 ~ 252 ~ 1220 ~ 805 ~ 10
1 Piece(s) 14 Day(s) or more 10[Stainless Steel] SUS440C or 13Cr stainlessNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC172 ~ 30020 ~ 808 ~ 15
1 Piece(s) 14 Day(s) or more 10[Stainless Steel] SUS440C or 13Cr stainlessNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC172 ~ 302 ~ 1620 ~ 808 ~ 15
1 Piece(s) 14 Day(s) or more 10[Stainless Steel] SUS440C or 13Cr stainlessNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC192 ~ 30020 ~ 808 ~ 15
1 Piece(s) 14 Day(s) or more 10[Stainless Steel] SUS440C or 13Cr stainlessNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC192 ~ 302 ~ 1620 ~ 808 ~ 15
1 Piece(s) 14 Day(s) or more 10[Stainless Steel] SUS440C or 13Cr stainlessNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC242 ~ 30020 ~ 8010 ~ 15
1 Piece(s) 14 Day(s) or more 10[Stainless Steel] SUS440C or 13Cr stainlessNot ProvidedProvidedTreated Hardness: 50 ~ 55HRC242 ~ 302 ~ 2020 ~ 8010 ~ 15
1 Piece(s) 10 Day(s) or more 10[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC62 ~ 12010 ~ 503 ~ 4
1 Piece(s) 10 Day(s) or more 10[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC62 ~ 122 ~ 810 ~ 503 ~ 4
1 Piece(s) 10 Day(s) or more 10[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC72 ~ 15010 ~ 503 ~ 6
1 Piece(s) 10 Day(s) or more 10[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC72 ~ 152 ~ 810 ~ 503 ~ 6
1 Piece(s) 10 Day(s) or more 10[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC82 ~ 15015 ~ 503 ~ 6
1 Piece(s) 10 Day(s) or more 10[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC82 ~ 152 ~ 1015 ~ 503 ~ 6
1 Piece(s) 10 Day(s) or more 10[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC102 ~ 20020 ~ 804 ~ 8
1 Piece(s) 10 Day(s) or more 10[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC102 ~ 202 ~ 1020 ~ 804 ~ 8
1 Piece(s) 10 Day(s) or more 10[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC122 ~ 20020 ~ 804 ~ 10
1 Piece(s) 10 Day(s) or more 10[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC122 ~ 202 ~ 1220 ~ 804 ~ 10
1 Piece(s) 10 Day(s) or more 10[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC132 ~ 25020 ~ 805 ~ 10
1 Piece(s) 10 Day(s) or more 10[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC132 ~ 252 ~ 1220 ~ 805 ~ 10
1 Piece(s) 10 Day(s) or more 10[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC142 ~ 25020 ~ 805 ~ 10
1 Piece(s) 10 Day(s) or more 10[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC142 ~ 252 ~ 1220 ~ 805 ~ 10
1 Piece(s) 10 Day(s) or more 10[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC172 ~ 30020 ~ 808 ~ 15
1 Piece(s) 10 Day(s) or more 10[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC172 ~ 302 ~ 1620 ~ 808 ~ 15
1 Piece(s) 10 Day(s) or more 10[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC192 ~ 30020 ~ 808 ~ 15
1 Piece(s) 10 Day(s) or more 10[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC192 ~ 302 ~ 1620 ~ 808 ~ 15
1 Piece(s) 10 Day(s) or more 10[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC242 ~ 30020 ~ 8010 ~ 15
1 Piece(s) 10 Day(s) or more 10[Steel] S45C EquivalentBlack OxideProvidedTreated Hardness: 45 ~ 50HRC242 ~ 302 ~ 2020 ~ 8010 ~ 15
1 Piece(s) 10 Day(s) or more 10[Steel] S45C EquivalentHard Chrome PlatingProvidedTreated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~62 ~ 12010 ~ 503 ~ 4
1 Piece(s) 10 Day(s) or more 10[Steel] S45C EquivalentHard Chrome PlatingProvidedTreated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~62 ~ 122 ~ 810 ~ 503 ~ 4
1 Piece(s) 10 Day(s) or more 10[Steel] S45C EquivalentHard Chrome PlatingProvidedTreated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~72 ~ 15010 ~ 503 ~ 6
1 Piece(s) 10 Day(s) or more 10[Steel] S45C EquivalentHard Chrome PlatingProvidedTreated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~72 ~ 152 ~ 810 ~ 503 ~ 6

Loading...

 

Basic Information

Shape Support Pin Height Tolerance 0/+0.05 Mounting Type Threaded
Tip Shape Tapered

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)