(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Bushings for Locating Pins - Configurable, Straight, Standard / Thin Wall

Bushings for Locating Pins - Configurable, Straight, Standard / Thin Wall

This is a shoulder type bushing for positioning pins. Custom dimensions are available.

Bushings for Locating Pins - Configurable, Straight:Related Image

■Standard
[ M ]Material[ S ]Surface Treatment[ H ]HardnessType
p6m6
SKS3 Equivalent-56~60HRCJBAFPJBAF
SKS3 EquivalentBlack Oxide56~60HRCJBAFBPJBAFB
SKS3 EquivalentElectroless Nickel Plating56~60HRCJBAFMPJBAFM
SUS304--JBAFSPJBAFS
SUS440C or 13Cr stainless-50~55HRCJBAFCPJBAFC
[ ! ]For hole machining, please note that inner diameter shrinkage of p6 Type is more than that of m6 Type.
(See "Variance of I.D. after Press-fitting Bushings for Locating Pins" on P.1566)

■Thin Wall
[ M ]Material[ S ]Surface Treatment[ H ]HardnessType
p6m6
SKS3 Equivalent-56~60HRCJBAUFPJBAUF
SKS3 EquivalentBlack Oxide56~60HRCJBAUFBPJBAUFB
SKS3 EquivalentElectroless Nickel Plating56~60HRCJBAUFMPJBAUFM
440C or 420 Stainless Steel-50~55HRCJBAUFCPJBAUFC
[ ! ]For hole machining, please note that inner diameter shrinkage of p6 Type is more than that of m6 Type.
(See "Variance of I.D. after Press-fitting Bushings for Locating Pins" on P.1566)
 

Specifications

Part Number-P-L
JBAF10
JBAUFC10
-
-
P4.00
P8.00
-
-
L8.5
L15.0
■Standard
Part NumberP 0.01mm IncrementL 0.1mm IncrementThickness (N)R
TypeDD Tolerance
p6m6
(p6)
JBAFP
JBAFBP
JBAFMP
JBAFSP
JBAFCP
(m6)
JBAF
JBAFB
JBAFM
JBAFS
JBAFC
5+0.020
+0.012
+0.012
+0.004
2.00~2.505.0~6.01.25~1.500.8
7+0.024
+0.015
+0.015
+0.006
2.00~3.505.0~8.01.75~2.500.8
8+0.024
+0.015
+0.015
+0.006
3.00~4.505.0~13.01.75~2.501.0
10+0.024
+0.015
+0.015
+0.006
4.00~6.505.0~20.01.75~3.001.0
12+0.029
+0.018
+0.018
+0.007
6.00~8.501.75~3.002.0
15+0.029
+0.018
+0.018
+0.007
8.00~10.505.0~40.02.25~3.502.0
18+0.029
+0.018
+0.018
+0.007
10.00~12.502.75~4.002.0
20+0.035
+0.022
+0.021
+0.008
12.00~13.503.25~4.002.0
22+0.035
+0.022
+0.021
+0.008
12.00~13.504.25~5.002.0
25+0.035
+0.022
+0.021
+0.008
13.00~15.504.75~6.002.0
26+0.035
+0.022
+0.021
+0.008
15.00~16.504.75~5.502.0
30+0.035
+0.022
+0.021
+0.008
16.00~20.505.0~60.04.75~7.003.0
35+0.042
+0.026
+0.025
+0.009
20.00~25.005.00~7.503.0
[ ! ]L≤Px2.5 when P≤3.59 L≤Px3.0 when P≥3.60 [ ! ] For (D-P)/2≤2, R≤2
■Thin Wall
Part NumberP
0.01mm Increment
L
0.1mm Increment
Thickness (N)R
TypeDD Tolerance
p6m6
(p6)
JBAUFP
JBAUFBP
JBAUFMP
JBAUFCP
(m6)
JBAUF
JBAUFB
JBAUFM
JBAUFC
7+0.024
+0.015
+0.015
+0.006
3.51~5.005.0~8.01.00~1.740.5
8+0.024
+0.015
+0.015
+0.006
4.51~6.005.0~13.01.00~1.740.5
9+0.024
+0.015
+0.015
+0.006
4.51~6.501.25~2.240.5
10+0.024
+0.015
+0.015
+0.006
6.51~8.005.0~20.01.00~1.740.5
11+0.029
+0.018
+0.018
+0.007
8.00~9.001.00~1.500.5
12+0.029
+0.018
+0.018
+0.007
8.51~9.001.50~1.740.5
13+0.029
+0.018
+0.018
+0.007
8.51~10.001.50~2.240.5
14+0.029
+0.018
+0.018
+0.007
9.00~11.001.50~2.500.5
15+0.029
+0.018
+0.018
+0.007
10.51~12.005.0~40.01.50~2.240.5
17+0.029
+0.018
+0.018
+0.007
10.51~13.002.00~3.241.0
18+0.029
+0.018
+0.018
+0.007
12.51~14.002.00~2.741.0
20+0.035
+0.022
+0.021
+0.008
13.51~15.002.50~3.241.0
22+0.035
+0.022
+0.021
+0.008
13.51~17.002.50~4.241.0
25+0.035
+0.022
+0.021
+0.008
15.51~19.003.00~4.741.0
26+0.035
+0.022
+0.021
+0.008
16.51~20.003.00~4.741.0
30+0.035
+0.022
+0.021
+0.008
20.51~24.003.00~4.741.5
35+0.042
+0.026
+0.025
+0.009
25.01~29.005.0~60.03.00~4.991.5
[ ! ]L≤Px2.5 when P≤3.59 L≤Px3.0 when P≥3.60

Alterations

Bushings for Locating Pins - Configurable, Straight:Related Image

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
JBAF5-P[2-2.5/0.01]-L[5-6/0.1]
JBAF7-P[2-3.5/0.01]-L[5-8/0.1]
JBAF8-P[3-4.5/0.01]-L[5-13.5/0.1]
JBAF10-P[4-6.5/0.01]-L[5-20/0.1]
JBAF12-P[6-8.5/0.01]-L[5-20/0.1]
JBAF15-P[8-10.5/0.01]-L[5-40/0.1]
JBAF18-P[10-12.5/0.01]-L[5-40/0.1]
JBAF20-P[12-13.5/0.01]-L[5-40/0.1]
JBAF22-P[12-13.5/0.01]-L[5-40/0.1]
JBAF25-P[13-15.5/0.01]-L[5-40/0.1]
JBAF26-P[15-16.5/0.01]-L[5-40/0.1]
JBAF30-P[16-20.5/0.01]-L[5-60/0.1]
JBAF35-P[20-25/0.01]-L[5-60/0.1]
JBAFB5-P[2-2.5/0.01]-L[5-6/0.1]
JBAFB7-P[2-3.5/0.01]-L[5-8/0.1]
JBAFB8-P[3-4.5/0.01]-L[5-13/0.1]
JBAFB10-P[4-6.5/0.01]-L[5-20/0.1]
JBAFB12-P[6-8.5/0.01]-L[5-20/0.1]
JBAFB15-P[8-10.5/0.01]-L[5-40/0.1]
JBAFB18-P[10-12.5/0.01]-L[5-40/0.1]
JBAFB20-P[12-13.5/0.01]-L[5-40/0.1]
JBAFB22-P[12-13.5/0.01]-L[5-40/0.1]
JBAFB25-P[13-15.5/0.01]-L[5-40/0.1]
JBAFB26-P[15-16.5/0.01]-L[5-40/0.1]
JBAFB30-P[16-20.5/0.01]-L[5-60/0.1]
JBAFB35-P[20-25/0.01]-L[5-60/0.1]
JBAFBP5-P[2-2.5/0.01]-L[5-6/0.1]
JBAFBP7-P[2-3.5/0.01]-L[5-8/0.1]
JBAFBP8-P[3-4.5/0.01]-L[5-13/0.1]
JBAFBP10-P[4-6.5/0.01]-L[5-20/0.1]
JBAFBP12-P[6-8.5/0.01]-L[5-20/0.1]
JBAFBP15-P[8-10.5/0.01]-L[5-40/0.1]
JBAFBP18-P[10-12.5/0.01]-L[5-40/0.1]
JBAFBP20-P[12-13.5/0.01]-L[5-40/0.1]
JBAFBP22-P[12-13.5/0.01]-L[5-40/0.1]
JBAFBP25-P[13-15.5/0.01]-L[5-40/0.1]
JBAFBP26-P[15-16.5/0.01]-L[5-40/0.1]
JBAFBP30-P[16-20.5/0.01]-L[5-60/0.1]
JBAFBP35-P[20-25/0.01]-L[5-60/0.1]
JBAFC5-P[2-2.5/0.01]-L[5-6/0.1]
JBAFC7-P[2-3.5/0.01]-L[5-8/0.1]
JBAFC8-P[3-4.5/0.01]-L[5-13/0.1]
JBAFC10-P[4-6.5/0.01]-L[5-20/0.1]
JBAFC12-P[6-8.5/0.01]-L[5-20/0.1]
JBAFC15-P[8-10.5/0.01]-L[5-40/0.1]
JBAFC18-P[10-12.5/0.01]-L[5-40/0.1]
JBAFC20-P[12-13.5/0.01]-L[5-40/0.1]
JBAFC22-P[12-13.5/0.01]-L[5-40/0.1]
JBAFC25-P[13-15.5/0.01]-L[5-40/0.1]
JBAFC26-P[15-16.5/0.01]-L[5-40/0.1]
JBAFC30-P[16-20.5/0.01]-L[5-60/0.1]
JBAFC35-P[20-25/0.01]-L[5-60/0.1]
JBAFCP5-P[2-2.5/0.01]-L[5-6/0.1]
JBAFCP7-P[2-3.5/0.01]-L[5-8/0.1]
JBAFCP8-P[3-4.5/0.01]-L[5-13/0.1]
JBAFCP10-P[4-6.5/0.01]-L[5-20/0.1]
JBAFCP12-P[6-8.5/0.01]-L[5-20/0.1]
JBAFCP15-P[8-10.5/0.01]-L[5-40/0.1]
JBAFCP18-P[10-12.5/0.01]-L[5-40/0.1]
JBAFCP20-P[12-13.5/0.01]-L[5-40/0.1]
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSO.D. Tolerance Material Surface Treatment Inner Diameter
(mm)
Outer Diameter
(mm)
L
(mm)
1 Piece(s) 8 Day(s) 10m6[Steel] SKS3 EquivalentNot Provided2 ~ 2.555 ~ 6
1 Piece(s) 8 Day(s) 10m6[Steel] SKS3 EquivalentNot Provided2 ~ 3.575 ~ 8
1 Piece(s) 8 Day(s) 10m6[Steel] SKS3 EquivalentNot Provided3 ~ 4.585 ~ 13.5
1 Piece(s) 8 Day(s) 10m6[Steel] SKS3 EquivalentNot Provided4 ~ 6.5105 ~ 20
1 Piece(s) 8 Day(s) 10m6[Steel] SKS3 EquivalentNot Provided6 ~ 8.5125 ~ 20
1 Piece(s) 8 Day(s) 10m6[Steel] SKS3 EquivalentNot Provided8 ~ 10.5155 ~ 40
1 Piece(s) 8 Day(s) 10m6[Steel] SKS3 EquivalentNot Provided10 ~ 12.5185 ~ 40
1 Piece(s) 8 Day(s) 10m6[Steel] SKS3 EquivalentNot Provided12 ~ 13.5205 ~ 40
1 Piece(s) 8 Day(s) 10m6[Steel] SKS3 EquivalentNot Provided12 ~ 13.5225 ~ 40
1 Piece(s) 8 Day(s) 10m6[Steel] SKS3 EquivalentNot Provided13 ~ 15.5255 ~ 40
1 Piece(s) 8 Day(s) 10m6[Steel] SKS3 EquivalentNot Provided15 ~ 16.5265 ~ 40
1 Piece(s) 8 Day(s) 10m6[Steel] SKS3 EquivalentNot Provided16 ~ 20.5305 ~ 60
1 Piece(s) 8 Day(s) 10m6[Steel] SKS3 EquivalentNot Provided20 ~ 25355 ~ 60
1 Piece(s) 8 Day(s) 10m6[Steel] SKS3 EquivalentBlack Oxide2 ~ 2.555 ~ 6
1 Piece(s) 8 Day(s) 10m6[Steel] SKS3 EquivalentBlack Oxide2 ~ 3.575 ~ 8
1 Piece(s) 8 Day(s) 10m6[Steel] SKS3 EquivalentBlack Oxide3 ~ 4.585 ~ 13
1 Piece(s) 8 Day(s) 10m6[Steel] SKS3 EquivalentBlack Oxide4 ~ 6.5105 ~ 20
1 Piece(s) 8 Day(s) 10m6[Steel] SKS3 EquivalentBlack Oxide6 ~ 8.5125 ~ 20
1 Piece(s) 8 Day(s) 10m6[Steel] SKS3 EquivalentBlack Oxide8 ~ 10.5155 ~ 40
1 Piece(s) 8 Day(s) 10m6[Steel] SKS3 EquivalentBlack Oxide10 ~ 12.5185 ~ 40
1 Piece(s) 8 Day(s) 10m6[Steel] SKS3 EquivalentBlack Oxide12 ~ 13.5205 ~ 40
1 Piece(s) 8 Day(s) 10m6[Steel] SKS3 EquivalentBlack Oxide12 ~ 13.5225 ~ 40
1 Piece(s) 8 Day(s) 10m6[Steel] SKS3 EquivalentBlack Oxide13 ~ 15.5255 ~ 40
1 Piece(s) 8 Day(s) 10m6[Steel] SKS3 EquivalentBlack Oxide15 ~ 16.5265 ~ 40
1 Piece(s) 8 Day(s) 10m6[Steel] SKS3 EquivalentBlack Oxide16 ~ 20.5305 ~ 60
1 Piece(s) 8 Day(s) 10m6[Steel] SKS3 EquivalentBlack Oxide20 ~ 25355 ~ 60
1 Piece(s) 8 Day(s) 10p6[Steel] SKS3 EquivalentBlack Oxide2 ~ 2.555 ~ 6
1 Piece(s) 8 Day(s) 10p6[Steel] SKS3 EquivalentBlack Oxide2 ~ 3.575 ~ 8
1 Piece(s) 8 Day(s) 10p6[Steel] SKS3 EquivalentBlack Oxide3 ~ 4.585 ~ 13
1 Piece(s) 8 Day(s) 10p6[Steel] SKS3 EquivalentBlack Oxide4 ~ 6.5105 ~ 20
1 Piece(s) 8 Day(s) 10p6[Steel] SKS3 EquivalentBlack Oxide6 ~ 8.5125 ~ 20
1 Piece(s) 8 Day(s) 10p6[Steel] SKS3 EquivalentBlack Oxide8 ~ 10.5155 ~ 40
1 Piece(s) 8 Day(s) 10p6[Steel] SKS3 EquivalentBlack Oxide10 ~ 12.5185 ~ 40
1 Piece(s) 8 Day(s) 10p6[Steel] SKS3 EquivalentBlack Oxide12 ~ 13.5205 ~ 40
1 Piece(s) 8 Day(s) 10p6[Steel] SKS3 EquivalentBlack Oxide12 ~ 13.5225 ~ 40
1 Piece(s) 8 Day(s) 10p6[Steel] SKS3 EquivalentBlack Oxide13 ~ 15.5255 ~ 40
1 Piece(s) 8 Day(s) 10p6[Steel] SKS3 EquivalentBlack Oxide15 ~ 16.5265 ~ 40
1 Piece(s) 8 Day(s) 10p6[Steel] SKS3 EquivalentBlack Oxide16 ~ 20.5305 ~ 60
1 Piece(s) 8 Day(s) 10p6[Steel] SKS3 EquivalentBlack Oxide20 ~ 25355 ~ 60
1 Piece(s) 8 Day(s) 10m6[Stainless Steel] SUS440C or 13Cr stainlessNot Provided2 ~ 2.555 ~ 6
1 Piece(s) 8 Day(s) 10m6[Stainless Steel] SUS440C or 13Cr stainlessNot Provided2 ~ 3.575 ~ 8
1 Piece(s) 8 Day(s) 10m6[Stainless Steel] SUS440C or 13Cr stainlessNot Provided3 ~ 4.585 ~ 13
1 Piece(s) 8 Day(s) 10m6[Stainless Steel] SUS440C or 13Cr stainlessNot Provided4 ~ 6.5105 ~ 20
1 Piece(s) 8 Day(s) 10m6[Stainless Steel] SUS440C or 13Cr stainlessNot Provided6 ~ 8.5125 ~ 20
1 Piece(s) 8 Day(s) 10m6[Stainless Steel] SUS440C or 13Cr stainlessNot Provided8 ~ 10.5155 ~ 40
1 Piece(s) 8 Day(s) 10m6[Stainless Steel] SUS440C or 13Cr stainlessNot Provided10 ~ 12.5185 ~ 40
1 Piece(s) 8 Day(s) 10m6[Stainless Steel] SUS440C or 13Cr stainlessNot Provided12 ~ 13.5205 ~ 40
1 Piece(s) 8 Day(s) 10m6[Stainless Steel] SUS440C or 13Cr stainlessNot Provided12 ~ 13.5225 ~ 40
1 Piece(s) 8 Day(s) 10m6[Stainless Steel] SUS440C or 13Cr stainlessNot Provided13 ~ 15.5255 ~ 40
1 Piece(s) 8 Day(s) 10m6[Stainless Steel] SUS440C or 13Cr stainlessNot Provided15 ~ 16.5265 ~ 40
1 Piece(s) 8 Day(s) 10m6[Stainless Steel] SUS440C or 13Cr stainlessNot Provided16 ~ 20.5305 ~ 60
1 Piece(s) 8 Day(s) 10m6[Stainless Steel] SUS440C or 13Cr stainlessNot Provided20 ~ 25355 ~ 60
1 Piece(s) 8 Day(s) 10p6[Stainless Steel] SUS440C or 13Cr stainlessNot Provided2 ~ 2.555 ~ 6
1 Piece(s) 8 Day(s) 10p6[Stainless Steel] SUS440C or 13Cr stainlessNot Provided2 ~ 3.575 ~ 8
1 Piece(s) 8 Day(s) 10p6[Stainless Steel] SUS440C or 13Cr stainlessNot Provided3 ~ 4.585 ~ 13
1 Piece(s) 8 Day(s) 10p6[Stainless Steel] SUS440C or 13Cr stainlessNot Provided4 ~ 6.5105 ~ 20
1 Piece(s) 8 Day(s) 10p6[Stainless Steel] SUS440C or 13Cr stainlessNot Provided6 ~ 8.5125 ~ 20
1 Piece(s) 8 Day(s) 10p6[Stainless Steel] SUS440C or 13Cr stainlessNot Provided8 ~ 10.5155 ~ 40
1 Piece(s) 8 Day(s) 10p6[Stainless Steel] SUS440C or 13Cr stainlessNot Provided10 ~ 12.5185 ~ 40
1 Piece(s) 8 Day(s) 10p6[Stainless Steel] SUS440C or 13Cr stainlessNot Provided12 ~ 13.5205 ~ 40

Loading...

 

Basic Information

Type Bushing Basic Shape Straight Fixing Support Not Provided
I.D. Shape Circular

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)