(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Bushings for Locating Pins - Configurable, Shouldered, Standard / Thin Wall

Bushings for Locating Pins - Configurable, Shouldered, Standard / Thin Wall

This is a straight type bushing for positioning pins. Custom dimensions are available.

Bushings for Locating Pins - Configurable, Shouldered:Related Image

■Standard
[ M ]Material[ S ]Surface Treatment[ H ]HardnessType
p6m6
SKS3 Equivalent-56~60HRCJBHFPJBHF
SKS3 EquivalentivalentBlack Oxide56~60HRCJBHFBPJBHFB
SKS3 EquivalentElectroless Nickel Plating56~60HRCJBHFMPJBHFM
SUS304--JBHFSPJBHFS
SUS440C or 13Cr stainless-50~55HRCJBHFCPJBHFC
[ ! ]For hole machining, please note that inner diameter shrinkage of p6 Type is more than that of m6 Type.
(See "Variance of I.D. after Press-fitting Bushings for Locating Pins" on P.1566)

■Thin Wall
[ M ]Material[ S ]Surface Treatment[ H ]HardnessType
p6m6
SKS3 Equivalent-56~60HRCJBHUFPJBHUF
SKS3 EquivalentBlack Oxide56~60HRCJBHUFBPJBHUFB
SKS3 EquivalentElectroless Nickel Plating56~60HRCJBHUFMPJBHUFM
SUS440C or 13Cr stainless-50~55HRCJBHUFCPJBHUFC
[ ! ]For hole machining, please note that inner diameter shrinkage of p6 Type is more than that of m6 Type.
(See "Variance of I.D. after Press-fitting Bushings for Locating Pins" on P.1566)
 

Specifications

Part Number-P-L
JBHFM25-P14.00-L20.0
JBHUFM15-P11.00-L20.0
■Standard
Part NumberP
0.01mm Increment
L
0.1mm Increment
Thickness (N)RHT
TypeDD Tolerance
p6m6
(p6)
JBHFP
JBHFBP
JBHFMP
JBHFSP
JBHFCP

(m6)
JBHF
JBHFB
JBHFM
JBHFS
JBHFC
5+0.020
+0.012
+0.012
+0.004
2.20~2.503.0~3.51.25~1.500.892.5
7+0.024
+0.015
+0.015
+0.006
2.20~3.503.0~6.01.75~2.500.8112.5
8+0.024
+0.015
+0.015
+0.006
3.00~4.503.0~10.01.75~2.501.0123
10+0.024
+0.015
+0.015
+0.006
4.00~6.503.0~15.01.75~3.001.0143
12+0.029
+0.018
+0.018
+0.007
6.00~8.501.75~3.002.0164
15+0.029
+0.018
+0.018
+0.007
8.00~10.505.0~35.02.25~3.502.0194
18+0.029
+0.018
+0.018
+0.007
10.00~12.502.75~4.002.0224
20+0.035
+0.022
+0.021
+0.008
12.00~13.503.25~4.002.0265
22+0.035
+0.022
+0.021
+0.008
12.00~13.504.25~5.002.0265
25+0.035
+0.022
+0.021
+0.008
13.00~15.504.75~6.002.0305
26+0.035
+0.022
+0.021
+0.008
15.00~16.504.75~5.502.0305
30+0.035
+0.022
+0.021
+0.008
16.00~20.505.0~50.04.75~7.003.0356
35+0.042
+0.026
+0.025
+0.009
20.00~25.005.00~7.503.0406
[ ! ]L+T≤Px2.5 when P≤3.59 L+T≤Px3.0 when P≥3.60

■Thin Wall
Part NumberP
0.01mm Increment
L
0.1mm Increment
Thickness (N)RHT
TypeDD Tolerance
p6m6
(p6)
JBHUFP
JBHUFBP
JBHUFMP
JBHUFCP


(m6)
JBHUF
JBHUFB
JBHUFM
JBHUFC
7+0.024
+0.015
+0.015
+0.006
3.51~5.003.0~6.01.00~1.740.5112.5
8+0.024
+0.015
+0.015
+0.006
4.51~6.003.0~10.01.00~1.740.5123
9+0.024
+0.015
+0.015
+0.006
4.51~6.501.25~2.240.513.53
10+0.024
+0.015
+0.015
+0.006
6.51~8.003.0~15.01.00~1.740.5143
11+0.029
+0.018
+0.018
+0.007
8.00~9.001.00~1.500.5153
12+0.029
+0.018
+0.018
+0.007
8.51~9.001.50~1.740.5164
13+0.029
+0.018
+0.018
+0.007
8.51~10.005.0~35.01.50~2.240.5174
14+0.029
+0.018
+0.018
+0.007
9.00~11.001.50~2.500.5184
15+0.029
+0.018
+0.018
+0.007
10.51~12.001.50~2.240.5194
17+0.029
+0.018
+0.018
+0.007
10.51~13.002.00~3.241.0215
18+0.029
+0.018
+0.018
+0.007
12.51~14.002.00~2.741.0225
20+0.035
+0.022
+0.021
+0.008
13.51~15.002.50~3.241.0265
22+0.035
+0.022
+0.021
+0.008
13.51~17.002.50~4.241.0265
25+0.035
+0.022
+0.021
+0.008
15.51~19.003.00~4.741.0305
26+0.035
+0.022
+0.021
+0.008
16.51~20.003.00~4.741.0305
30+0.035
+0.022
+0.021
+0.008
20.51~24.003.00~4.741.5356
35+0.042
+0.026
+0.025
+0.009
25.01~29.005.0~50.03.00~4.991.5406
[ ! ]L+T≤Px2.5 when P≤3.59 L+T≤Px3.0 when P≥3.60

Alterations

Bushings for Locating Pins - Configurable, Shouldered:Related Image

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
JBHF5-P[2-2.5/0.01]-L[3-3.7/0.1]
JBHF7-P[2-3.5/0.01]-L[3-6.2/0.1]
JBHF8-P[3-4.5/0.01]-L[3-10.5/0.1]
JBHF10-P[4-6.5/0.01]-L[3-15/0.1]
JBHF12-P[6-8.5/0.01]-L[3-15/0.1]
JBHF15-P[8-10.5/0.01]-L[5-35/0.1]
JBHF18-P[10-12.5/0.01]-L[5-35/0.1]
JBHF20-P[12-13.5/0.01]-L[5-35/0.1]
JBHF22-P[12-13.5/0.01]-L[5-35/0.1]
JBHF25-P[13-15.5/0.01]-L[5-35/0.1]
JBHF26-P[15-16.5/0.01]-L[5-35/0.1]
JBHF30-P[16-20.5/0.01]-L[5-50/0.1]
JBHF35-P[20-25/0.01]-L[5-50/0.1]
JBHFB5-P[2.2-2.5/0.01]-L[3-3.5/0.1]
JBHFB7-P[2.2-3.5/0.01]-L[3-6/0.1]
JBHFB8-P[3-4.5/0.01]-L[3-10/0.1]
JBHFB10-P[4-6.5/0.01]-L[3-15/0.1]
JBHFB12-P[6-8.5/0.01]-L[3-15/0.1]
JBHFB15-P[8-10.5/0.01]-L[5-35/0.1]
JBHFB18-P[10-12.5/0.01]-L[5-35/0.1]
JBHFB20-P[12-13.5/0.01]-L[5-35/0.1]
JBHFB22-P[12-13.5/0.01]-L[5-35/0.1]
JBHFB25-P[13-15.5/0.01]-L[5-35/0.1]
JBHFB26-P[15-16.5/0.01]-L[5-35/0.1]
JBHFB30-P[16-20.5/0.01]-L[5-50/0.1]
JBHFB35-P[20-25/0.01]-L[5-50/0.1]
JBHFBP5-P[2.2-2.5/0.01]-L[3-3.5/0.1]
JBHFBP7-P[2-3.5/0.01]-L[3-6/0.1]
JBHFBP8-P[3-4.5/0.01]-L[3-10/0.1]
JBHFBP10-P[4-6.5/0.01]-L[3-15/0.1]
JBHFBP12-P[6-8.5/0.01]-L[3-15/0.1]
JBHFBP15-P[8-10.5/0.01]-L[5-35/0.1]
JBHFBP18-P[10-12.5/0.01]-L[5-35/0.1]
JBHFBP20-P[12-13.5/0.01]-L[5-35/0.1]
JBHFBP22-P[12-13.5/0.01]-L[5-35/0.1]
JBHFBP25-P[13-15.5/0.01]-L[5-35/0.1]
JBHFBP26-P[15-16.5/0.01]-L[5-35/0.1]
JBHFBP30-P[16-20.5/0.01]-L[5-50/0.1]
JBHFBP35-P[20-25/0.01]-L[5-50/0.1]
JBHFC5-P[2.2-2.5/0.01]-L[3-3.5/0.1]
JBHFC7-P[2.2-3.5/0.01]-L[3-6/0.1]
JBHFC8-P[3-4.5/0.01]-L[3-10/0.1]
JBHFC10-P[4-6.5/0.01]-L[3-15/0.1]
JBHFC12-P[6-8.5/0.01]-L[3-15/0.1]
JBHFC15-P[8-10.5/0.01]-L[5-35/0.1]
JBHFC18-P[10-12.5/0.01]-L[5-35/0.1]
JBHFC20-P[12-13.5/0.01]-L[5-35/0.1]
JBHFC22-P[12-13.5/0.01]-L[5-35/0.1]
JBHFC25-P[13-15.5/0.01]-L[5-35/0.1]
JBHFC26-P[15-16.5/0.01]-L[5-35/0.1]
JBHFC30-P[16-20.5/0.01]-L[5-50/0.1]
JBHFC35-P[20-25/0.01]-L[5-50/0.1]
JBHFCP5-P[2.2-2.5/0.01]-L[3-3.5/0.1]
JBHFCP7-P[2.2-3.5/0.01]-L[3-6/0.1]
JBHFCP8-P[3-4.5/0.01]-L[3-10/0.1]
JBHFCP10-P[4-6.5/0.01]-L[3-15/0.1]
JBHFCP12-P[6-8.5/0.01]-L[3-15/0.1]
JBHFCP15-P[8-10.5/0.01]-L[5-35/0.1]
JBHFCP18-P[10-12.5/0.01]-L[5-35/0.1]
JBHFCP20-P[12-13.5/0.01]-L[5-35/0.1]
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSO.D. Tolerance Material Surface Treatment Inner Diameter
(mm)
Outer Diameter
(mm)
L
(mm)
1 Piece(s) 8 Day(s) 10m6[Steel] SKS3 EquivalentNot Provided2 ~ 2.553 ~ 3.7
1 Piece(s) 8 Day(s) 10m6[Steel] SKS3 EquivalentNot Provided2 ~ 3.573 ~ 6.2
1 Piece(s) 8 Day(s) 10m6[Steel] SKS3 EquivalentNot Provided3 ~ 4.583 ~ 10.5
1 Piece(s) 8 Day(s) 10m6[Steel] SKS3 EquivalentNot Provided4 ~ 6.5103 ~ 15
1 Piece(s) 8 Day(s) 10m6[Steel] SKS3 EquivalentNot Provided6 ~ 8.5123 ~ 15
1 Piece(s) 8 Day(s) 10m6[Steel] SKS3 EquivalentNot Provided8 ~ 10.5155 ~ 35
1 Piece(s) 8 Day(s) 10m6[Steel] SKS3 EquivalentNot Provided10 ~ 12.5185 ~ 35
1 Piece(s) 8 Day(s) 10m6[Steel] SKS3 EquivalentNot Provided12 ~ 13.5205 ~ 35
1 Piece(s) 8 Day(s) 10m6[Steel] SKS3 EquivalentNot Provided12 ~ 13.5225 ~ 35
1 Piece(s) 8 Day(s) 10m6[Steel] SKS3 EquivalentNot Provided13 ~ 15.5255 ~ 35
1 Piece(s) 8 Day(s) 10m6[Steel] SKS3 EquivalentNot Provided15 ~ 16.5265 ~ 35
1 Piece(s) 8 Day(s) 10m6[Steel] SKS3 EquivalentNot Provided16 ~ 20.5305 ~ 50
1 Piece(s) 8 Day(s) 10m6[Steel] SKS3 EquivalentNot Provided20 ~ 25355 ~ 50
1 Piece(s) 8 Day(s) 10m6[Steel] SKS3 EquivalentBlack Oxide2.2 ~ 2.553 ~ 3.5
1 Piece(s) 8 Day(s) 10m6[Steel] SKS3 EquivalentBlack Oxide2.2 ~ 3.573 ~ 6
1 Piece(s) 8 Day(s) 10m6[Steel] SKS3 EquivalentBlack Oxide3 ~ 4.583 ~ 10
1 Piece(s) 8 Day(s) 10m6[Steel] SKS3 EquivalentBlack Oxide4 ~ 6.5103 ~ 15
1 Piece(s) 8 Day(s) 10m6[Steel] SKS3 EquivalentBlack Oxide6 ~ 8.5123 ~ 15
1 Piece(s) 8 Day(s) 10m6[Steel] SKS3 EquivalentBlack Oxide8 ~ 10.5155 ~ 35
1 Piece(s) 8 Day(s) 10m6[Steel] SKS3 EquivalentBlack Oxide10 ~ 12.5185 ~ 35
1 Piece(s) 8 Day(s) 10m6[Steel] SKS3 EquivalentBlack Oxide12 ~ 13.5205 ~ 35
1 Piece(s) 8 Day(s) 10m6[Steel] SKS3 EquivalentBlack Oxide12 ~ 13.5225 ~ 35
1 Piece(s) 8 Day(s) 10m6[Steel] SKS3 EquivalentBlack Oxide13 ~ 15.5255 ~ 35
1 Piece(s) 8 Day(s) 10m6[Steel] SKS3 EquivalentBlack Oxide15 ~ 16.5265 ~ 35
1 Piece(s) 8 Day(s) 10m6[Steel] SKS3 EquivalentBlack Oxide16 ~ 20.5305 ~ 50
1 Piece(s) 8 Day(s) 10m6[Steel] SKS3 EquivalentBlack Oxide20 ~ 25355 ~ 50
1 Piece(s) 8 Day(s) 10p6[Steel] SKS3 EquivalentBlack Oxide2.2 ~ 2.553 ~ 3.5
1 Piece(s) 8 Day(s) 10p6[Steel] SKS3 EquivalentBlack Oxide2 ~ 3.573 ~ 6
1 Piece(s) 8 Day(s) 10p6[Steel] SKS3 EquivalentBlack Oxide3 ~ 4.583 ~ 10
1 Piece(s) 8 Day(s) 10p6[Steel] SKS3 EquivalentBlack Oxide4 ~ 6.5103 ~ 15
1 Piece(s) 8 Day(s) 10p6[Steel] SKS3 EquivalentBlack Oxide6 ~ 8.5123 ~ 15
1 Piece(s) 8 Day(s) 10p6[Steel] SKS3 EquivalentBlack Oxide8 ~ 10.5155 ~ 35
1 Piece(s) 8 Day(s) 10p6[Steel] SKS3 EquivalentBlack Oxide10 ~ 12.5185 ~ 35
1 Piece(s) 8 Day(s) 10p6[Steel] SKS3 EquivalentBlack Oxide12 ~ 13.5205 ~ 35
1 Piece(s) 8 Day(s) 10p6[Steel] SKS3 EquivalentBlack Oxide12 ~ 13.5225 ~ 35
1 Piece(s) 8 Day(s) 10p6[Steel] SKS3 EquivalentBlack Oxide13 ~ 15.5255 ~ 35
1 Piece(s) 8 Day(s) 10p6[Steel] SKS3 EquivalentBlack Oxide15 ~ 16.5265 ~ 35
1 Piece(s) 8 Day(s) 10p6[Steel] SKS3 EquivalentBlack Oxide16 ~ 20.5305 ~ 50
1 Piece(s) 8 Day(s) 10p6[Steel] SKS3 EquivalentBlack Oxide20 ~ 25355 ~ 50
1 Piece(s) 8 Day(s) 10m6[Stainless Steel] SUS440C or 13Cr stainlessNot Provided2.2 ~ 2.553 ~ 3.5
1 Piece(s) 8 Day(s) 10m6[Stainless Steel] SUS440C or 13Cr stainlessNot Provided2.2 ~ 3.573 ~ 6
1 Piece(s) 8 Day(s) 10m6[Stainless Steel] SUS440C or 13Cr stainlessNot Provided3 ~ 4.583 ~ 10
1 Piece(s) 8 Day(s) 10m6[Stainless Steel] SUS440C or 13Cr stainlessNot Provided4 ~ 6.5103 ~ 15
1 Piece(s) 8 Day(s) 10m6[Stainless Steel] SUS440C or 13Cr stainlessNot Provided6 ~ 8.5123 ~ 15
1 Piece(s) 8 Day(s) 10m6[Stainless Steel] SUS440C or 13Cr stainlessNot Provided8 ~ 10.5155 ~ 35
1 Piece(s) 8 Day(s) 10m6[Stainless Steel] SUS440C or 13Cr stainlessNot Provided10 ~ 12.5185 ~ 35
1 Piece(s) 8 Day(s) 10m6[Stainless Steel] SUS440C or 13Cr stainlessNot Provided12 ~ 13.5205 ~ 35
1 Piece(s) 8 Day(s) 10m6[Stainless Steel] SUS440C or 13Cr stainlessNot Provided12 ~ 13.5225 ~ 35
1 Piece(s) 8 Day(s) 10m6[Stainless Steel] SUS440C or 13Cr stainlessNot Provided13 ~ 15.5255 ~ 35
1 Piece(s) 8 Day(s) 10m6[Stainless Steel] SUS440C or 13Cr stainlessNot Provided15 ~ 16.5265 ~ 35
1 Piece(s) 8 Day(s) 10m6[Stainless Steel] SUS440C or 13Cr stainlessNot Provided16 ~ 20.5305 ~ 50
1 Piece(s) 8 Day(s) 10m6[Stainless Steel] SUS440C or 13Cr stainlessNot Provided20 ~ 25355 ~ 50
1 Piece(s) 8 Day(s) 10p6[Stainless Steel] SUS440C or 13Cr stainlessNot Provided2.2 ~ 2.553 ~ 3.5
1 Piece(s) 8 Day(s) 10p6[Stainless Steel] SUS440C or 13Cr stainlessNot Provided2.2 ~ 3.573 ~ 6
1 Piece(s) 8 Day(s) 10p6[Stainless Steel] SUS440C or 13Cr stainlessNot Provided3 ~ 4.583 ~ 10
1 Piece(s) 8 Day(s) 10p6[Stainless Steel] SUS440C or 13Cr stainlessNot Provided4 ~ 6.5103 ~ 15
1 Piece(s) 8 Day(s) 10p6[Stainless Steel] SUS440C or 13Cr stainlessNot Provided6 ~ 8.5123 ~ 15
1 Piece(s) 8 Day(s) 10p6[Stainless Steel] SUS440C or 13Cr stainlessNot Provided8 ~ 10.5155 ~ 35
1 Piece(s) 8 Day(s) 10p6[Stainless Steel] SUS440C or 13Cr stainlessNot Provided10 ~ 12.5185 ~ 35
1 Piece(s) 8 Day(s) 10p6[Stainless Steel] SUS440C or 13Cr stainlessNot Provided12 ~ 13.5205 ~ 35

Loading...

 

Basic Information

Type Bushing Basic Shape Aluminum Fixing Support Not Provided
I.D. Shape Circular

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)