(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Aluminum Frame 8 Series/slot width 10/40x160mm

Aluminum Frame 8 Series/slot width 10/40x160mm

Aluminum Frame Series 8, Square shape 40 x 160mm, 4- Side Slots with Slot width 10mm
Surface treatment is not applied to cut surfaces and additional machining parts.

(i)Caution

  • Additional freight and delivery charge are added to items longer than 2000.1mm
  • Please check the content on our website as the PDF does not contain the most up-to-date information.

Note that, for some of the types shown here, order might be unable to be received by the MISUMI Thailand, Malaysia, Indonesia, and/or India offices.
 

Aluminum Extrusion 8 Series/slot width 10/40x160mm:Related Image HFS(Standard Type)
NFS(Economy Type)
EFS(Lightweight Type)


Aluminum Extrusion 8 Series/slot width 10/40x160mm:Related Image

Aluminum Extrusion 8 Series/slot width 10/40x160mm:Related Image

[ ! ]Cut surfaces and altered parts are not surface treated.
■8 Series
Aluminum Extrusions with 10mm Slot Width. Applicable to M8 Screws.

 

Specifications

Part Number - L
HFS8-40160 - 800
KEFS8-40160 - 4000


■Configurable Length Extrusions

Type [ M ]Material [ S ]Surface Treatment Part Number L
0.5mm Increment
Mass
kg/m
Sectional Area mm2 Cross Sectional Moment of Inertia mm4
ℓx ℓy
HFS A6N01SS-T5 Clear Anodize HFS8-40160 50~4000 5.54 2049 38.6x104 498x104
EFS A6N01SS-T5 Clear Anodize EFS8-40160 50~4000 5.25 1945 38.8x104 506x104
EFS A6N01SS-T5 Black Anodize EFSB8-40160 50~4000 5.25 1945 38.8x104 506x104
NFS A6063S-T5 Clear Anodize NFS8-40160 50~4000 5.25 1945 38.8x104 506x104

[ ! ]For some product types, up to 6,000mm length is available.
[ ! ]Some extrusions are not applicable. For details, refer to "Information about Non-FA Catalog Standard Product Services" (P.131) and contact the relevant person in charge at MISUMI.
■Fixed Length Extrusion (Effective Length 4000mm)
[ ! ]Part numbers beginning with the character "K" indicate Fixed Length Extrusion.

Type [ M ]Material [ S ]Surface Treatment Part Number L
mm
Sectional Area mm2 Cross Sectional Moment of Inertia mm4
ℓx ℓy
HFS A6N01SS-T5 Clear Anodize KHFS8-40160 4000 2049 38.6x104 498x104
EFS A6N01SS-T5 Clear Anodize KEFS8-40160 4000 1945 38.8x104 506x104
EFS A6N01SS-T5 Black Anodize KEFSB8-40160 4000 1945 38.8x104 506x104
NFS A6063S-T5 Clear Anodize KNFS8-40160 4000 1945 38.8x104 506x104

[ ! ]Effective length of 4000mm indicates extrusions with an effective length of 4000mm or more. The actual length including marginal grip is more than 4000mm (several dozen mm). Fixed Length Extrusions must be cut by users thus the exact length cannot be specified.

Alterations

Aluminum Extrusion 8 Series/slot width 10/40x160mm:Related Image
By using MISUMI's Long Aluminum Frame specification from the following additions, the high structure reassembling is freely possible.
Depending on classifications and sizes, there are some inapplicable frames.
For more information, please read the inapplicable listed on each page description table.
Inside the page description table, the items with "-" mark indicates the inapplicable.
CategoryAlteration NamesCodesExplanationsCatalog Page
Aluminum Frame  Alteration Summary/Chamfer/Part# Labeling ServiceP2-755&756
End TappingEnd Tapping on Center HoleLTP/RTP/TPW
LHP/RHP/HPW
Add tappings on frame ends.P2-757
End Tapping 4 Corner HolesLSP/RSP/SPWP2-768
Specify How to CutPrecision CutSCChange total length tolerance. (L±0.5→L±0.2)
[ ! ]Available only for L≦1500
P2-758
45 deg CutL_T45/R_T45Cut at 45 deg angle. 
Wrench Access HolesWrench Access Hole at Fixed PositionLWP/RWPAdd wrench access holes at fixed position for blind joints. P2-759&760
Wrench Access Hole at Specified PositionAH/BH/AV/BVAdd wrench access holes at specified position for blind joints.P2-761&762
CounterboresCounterbores at Specified PositionZ6/XA100Add counterbores at specified position. Use the holes for connecting the frames and a table top.P2-763
Holes for Specific Blind Joint TypeD HoleLDH/RDHAdd holes needed for Single Joint connection.P2-764
S HoleLSH/RSHAdd holes needed for pre-assembly double joint connection.P2-765
M HoleLMH/RMHAdd holes needed for post-assembly double joint connection.P2-766
L HoleJLP/KLPAdd holes needed for parallel joint connection. P2-767
Other AlterationsGNFS/GFS Series End TappingLTS/RTS/TSWAdd end tappings on high rigidity frames.P2-768
HFSR Series End TappingLTS/RTS/TSWAdd end tappings needed for adding a protection cover on the end fo HFSR series frame.

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
EFS8-40160-[50-4000/0.5]
EFSB8-40160-[50-4000/0.5]
HFS8-40160-[50-4000/0.5]
KEFS8-40160-4000
KEFSB8-40160-4000
KHFS8-40160-4000
KNFS8-40160-4000
NFS8-40160-[50-4000/0.5]
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSExtrusion Type_ Surface Treatment Material L Dimension Fixed, Specified Overall Length L (Effective Length)
(mm)
Overall Length L
(mm)
1 Piece(s) 12 Day(s) or more 10EFS (Lightweight)Clear AnodizeA6N01SS-T5Configurable-50 ~ 4000
1 Piece(s) 12 Day(s) or more 10EFS (Lightweight)Black AnodizeA6N01SS-T5Configurable-50 ~ 4000
1 Piece(s) 12 Day(s) or more 10HFS (Standard)Clear AnodizeA6N01SS-T5Configurable-50 ~ 4000
1 Piece(s) 12 Day(s) or more 10EFS (Lightweight)Clear AnodizeA6N01SS-T5Stationary4000-
1 Piece(s) 12 Day(s) or more 10EFS (Lightweight)Black AnodizeA6N01SS-T5Stationary4000-
1 Piece(s) 12 Day(s) or more 10HFS (Standard)Clear AnodizeA6N01SS-T5Stationary4000-
1 Piece(s) 12 Day(s) or more -NFS (Economy)Clear AnodizeA6063S-T5Stationary4000-
1 Piece(s) 12 Day(s) or more -NFS (Economy)Clear AnodizeA6063S-T5Configurable-50 ~ 4000

Loading...

  1. 1
 

Basic Information

Standard Extrusion Size(mm) 40 Extrusion Size 40x160 Extrusion Series 8 Series
Extrusion Type Rectangle Shape Number of Extrusion Slots 1 Slot x 4 Slots Number of Slotted Surfaces Four-Side Slots
Surface Milled Not Provided Extrusion Size: Width (A)(mm) 40 Extrusion Size: Thickness (T)(mm) 160

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)