(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

MC Nylon® Plates-Standard / Sliding / High Strength / Conductivity / Weather Resistance Grade

MC Nylon® Plates-Standard / Sliding / High Strength / Conductivity / Weather Resistance Grade

[Features]·MC Nylon is a general-purpose engineering plastic used in various industrial applications.

MC Nylon® Plates-Standard / Sliding / High Strength / Conductivity / Weather Resistance Grade:Related Image
■Standard Type
TypeGrade / MaterialColorOperating Ambient Temperature
MCAStandard / MC901Blue-40~120°C
MCA-GStandard Thick Type / MC901
MCAWStandard / MC900NCIvory
MCASSliding / MC703HLPurple
MCAYHigh Strength / MC602STDark BrownAmbient Temp. ~ 150°C
MCAPSWeather Resistance / MC801Dark GrayAmbient Temp. ~ 120°C
MCCAConductivity CDR2 / MC501CDR2BlackAmbient Temp. ~ 120°C
MCDAAntistatic CDR6 / MC501CDR6Black
MCEAAntistatic / Heat Resistant CDR9 / MC501CDR9BlackAmbient Temp. ~ 150°C
■Pre-drilled Type
TypeGrade / MaterialColorOperating Ambient Temperature
MCAStandard / MC901Blue-40~120°C
MCAWStandard / MC900NCIvory
MCASSliding / MC703HLPurple
MCAYHigh Strength / MC602STDark BrownAmbient Temp. ~ 150°C
MCAPSWeather Resistance / MC801Dark GrayAmbient Temp. ~ 120°C
MCCAConductivity CDR2 / MC501CDR2BlackAmbient Temp. ~ 120°C
MCDAAntistatic CDR6 / MC501CDR6Black
MCEAAntistatic / Heat Resistant CDR9 / MC501CDR9BlackAmbient Temp. ~ 150°C

Specifications

■Standard Type
Part Number-A-B-T
MCA-300-200-40
MCANTQ-200.5-100.5-10
MCA4FN-150.5-100.3-15
MCA6FMM-100.3-90.5-10.5
MCA2FQ-80-50-5
• Circular Sawing
• Guaranteed Perpendicularity of Circular Sawing
• 4-side Milling
• 6-surface Milling
• Upper-lower Surface Milling

■Pre-drilled Type
Part Number-A-B-T-F-G-Screw Nominal Dia.-L
MCDA4H
MCDA4H
-
-
200
500
-
-
155
300
-
-
5
10
-
-
F160
F300
-
-
G120
G200
-
-
N4
M5

-

L7.5
• Dimension Tolerance of A and B
TA, BA, B Dimension Tolerance
Unit: mm
5~30~99±0.5
100~250±0.75
251~±1.0
40~100~3000~+5

• T Dimension Tolerance, Rate of Camber and Torsion
TT Dimension ToleranceRates of Camber and Torsion
per 1,000mm
5, 7, 100~+1.51.2% or Less
12, 15, 201.0% or Less
25, 300~+2.00.4% or Less
40, 50, 600~+3.0

70, 80, 90, 100

0~+5.0

•Precision Guarantee
FinishWidth ParallelismPerpendicularity of Reference Plane
per 100mm
Guaranteed Perpendicularity of Circular Sawing (NT)0.10.1
4-side Milling (4F)
6-surface Milling (6F)
Reference plane stickers are attached to 4-side milled plates.
■ Standard Type
Part NumberDimension Range by MaterialABT
TypeFinish Symbol SelectionT Dimension ToleranceA, B Dimension Tolerance
MCA
MCA-G
MCAW
MCAS
MCAY
MCAPS
MCCA
MCDA
MCEA
(Standard, Blue)
(Standard Thick Type)
(Standard Ivory)
(Sliding)
(High Strength)
(Weather Resistance)
(Conductivity CDR2)
(Antistatic CDR6)
(Antistatic / Heat Resistant CDR9)
Circular Sawing1mm IncrementSelectable
-Not availableNot availableMCA20~50020~4005, 7, 10, 12, 15, 20, 25, 30
40~30040~30040, 50, 60
MCA-G301~500301~50040, 50, 60
70~30070~30070, 80, 90, 100
MCEA20~50020~40010, 12, 15, 20, 25
Others5, 7, 10, 12, 15, 20, 25, 30
Guaranteed Perpendicularity of Circular Saw Cuts (NT)0.5mm IncrementSelectable
NTNot available T5, 7, 10T12, 15, 20T25, 30MCEA20~50020~40010, 12, 15, 20, 25
Q0~+0.30~+0.40~+0.5Others5, 7, 10, 12, 15, 20, 25, 30
N±0.2±0.3±0.4
M-0.3~0-0.4~0-0.5~0
4-side Milling (4F)0.1mm IncrementSelectable
4FNot availableQ 0~+0.2
N ±0.1
M -0.2~0
MCEA10~40010~20010, 12, 15, 20, 25
Others5, 7, 10, 12, 15, 20, 25, 30
6-surface Milling (6F)0.1mm Increment0.1mm Increment
6FQ 0~+0.2
N ±0.1
M -0.2~0
Q 0~+0.2
N ±0.1
M -0.2~0
MCEA10~40010~20010~24
Others5~29
Upper-lower Surface Milling (2F)1mm Increment0.1mm Increment
2FQ 0~+0.2
N ±0.1
M -0.2~0
Not availableMCEA20~40020~25010~24
Others5~29
 T40, 50 and 60 may have steps on cut surfaces.
If MCA-G, A≥B≥T
■Pre-drilled Type
Part NumberABT Dimension Range by MaterialTFG
TypeT Dimension ToleranceNumber of Holes
MCA
MCAW
MCAS
MCAY
MCAPS
MCCA
MCDA
MCEA
(Standard, Blue)
(Standard, Ivory)
(Sliding)
(High Strength)
(Weather Resistance)
(Conductivity CDR2)
(Antistatic CDR6)
(Antistatic / Heat Resistant CDR9)
Circular Sawing1mm Increment Selectable0.5mm Increment
Not available2H (Horizontal)
2HL (Vertical)
4H
6H
20~50020~400MCEA10, 12, 15, 20, 256~491.5
(2H, 4H)
4.5~395.5
(2HL)
6~245.5
(6H)
4.5~395.5
(2H)
6~391.5
(2HL, 4H, 6H)
Others5, 7, 10, 12, 15, 20, 25, 30
Upper-lower Surface Milling (2F)1mm Increment 0.1mm Increment0.5mm Increment
2FQ 0~+0.2
2FN  ±0.1
2FM -0.2~0
2H (Horizontal)
2HL (Vertical)
4H
6H
20~40020~250MCEA10~246~391.5
(2H, 4H)
4.5~395.5
(2HL)
6~195.5
(6H)
4.5~245.5
(2H)
6~241.5
(2HL, 4H, 6H)
Others5~29
Dimension F Specification Range: For 2H and 4H, d(d1)+2.5≤F≤A-d(d1)-5; for 2HL, d(d1)/2+2.5≤F≤A-d(d1)/2-2.5; for 6H, d(d1)+2.5≤F≤(A-d(d1)-5)/2.
Dimension G Specification Range: For 2H, d(d1)/2+2.5≤G≤B-d(d1)/2-2.5; for 2HL, 4H and 6H, d(d1)+2.5≤G≤B-d(d1)-5.
For Pre-drilled Type, select N (through hole) or Z (counterbore hole); for Threaded Insert Type, select M (threaded insert) or L (insertion length).
 
T DimensionPre-drilled Hole Nominal Dia.
Through HoleCounterbore HoleThreaded Insert
NZML
5~63
4
5
6
8
10
-34    (Threaded Insert Length) Select from Table 1
7~934   3456  
10~14 456 3456810
15~30 45683456810

Alterations

MC Nylon® Plates-Standard / Sliding / High Strength / Conductivity / Weather Resistance Grade:Related Image
MC Nylon® Plates-Standard / Sliding / High Strength / Conductivity / Weather Resistance Grade:Related Image

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
MCA2FM2H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-M[3,​4,​5,​6,​8,​10]
MCA2FM2H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-N[3,​4,​5,​6,​8,​10]
MCA2FM2H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-Z[3,​4,​5,​6,​8,​10]
MCA2FM2HL-[20-400/1]-[20-250/1]-[5-29/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-M[3,​4,​5,​6,​8,​10]
MCA2FM2HL-[20-400/1]-[20-250/1]-[5-29/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-N[3,​4,​5,​6,​8,​10]
MCA2FM2HL-[20-400/1]-[20-250/1]-[5-29/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-Z[3,​4,​5,​6,​8]
MCA2FM4H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[6-245.5/0.5]-M[3,​4,​5,​6,​8,​10]
MCA2FM4H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[6-245.5/0.5]-N[3,​4,​5,​6,​8,​10]
MCA2FM4H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[6-245.5/0.5]-Z[3,​4,​5,​6,​8,​10]
MCA2FM6H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-195.5/0.5]-G[6-245.5/0.5]-M[3,​4,​5,​6,​8,​10]
MCA2FM6H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-195.5/0.5]-G[6-245.5/0.5]-N[3,​4,​5,​6,​8,​10]
MCA2FM6H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-195.5/0.5]-G[6-245.5/0.5]-Z[3,​4,​5,​6,​8,​10]
MCA2FM-[20-400/1]-[20-250/1]-[5-29/0.1]
MCA2FN2H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-M[3,​4,​5,​6,​8,​10]
MCA2FN2H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-N[3,​4,​5,​6,​8,​10]
MCA2FN2H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-Z[3,​4,​5,​6,​8]
MCA2FN2HL-[20-400/1]-[20-250/1]-[5-29/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-M[3,​4,​5,​6,​8,​10]
MCA2FN2HL-[20-400/1]-[20-250/1]-[5-29/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-N[3,​4,​5,​6,​8,​10]
MCA2FN2HL-[20-400/1]-[20-250/1]-[5-29/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-Z[3,​4,​5,​6,​8]
MCA2FN4H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[6-245.5/0.5]-M[3,​4,​5,​6,​8,​10]
MCA2FN4H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[6-245.5/0.5]-N[3,​4,​5,​6,​8,​10]
MCA2FN4H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[6-245.5/0.5]-Z[3,​4,​5,​6,​8,​10]
MCA2FN6H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-195.5/0.5]-G[6-245.5/0.5]-M[3,​4,​5,​6,​8,​10]
MCA2FN6H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-195.5/0.5]-G[6-245.5/0.5]-N[3,​4,​5,​6,​8,​10]
MCA2FN6H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-195.5/0.5]-G[6-245.5/0.5]-Z[3,​4,​5,​6,​8,​10]
MCA2FN-[20-400/1]-[20-250/1]-[5-29/0.1]
MCA2FQ2H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-M[3,​4,​5,​6,​8,​10]
MCA2FQ2H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-N[3,​4,​5,​6,​8,​10]
MCA2FQ2H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-Z[3,​4,​5,​6,​8,​10]
MCA2FQ2HL-[20-400/1]-[20-250/1]-[5-29/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-M[3,​4,​5,​6,​8,​10]
MCA2FQ2HL-[20-400/1]-[20-250/1]-[5-29/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-N[3,​4,​5,​6,​8,​10]
MCA2FQ2HL-[20-400/1]-[20-250/1]-[5-29/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-Z[3,​4,​5,​6,​8]
MCA2FQ4H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[6-245.5/0.5]-M[3,​4,​5,​6,​8,​10]
MCA2FQ4H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[6-245.5/0.5]-N[3,​4,​5,​6,​8,​10]
MCA2FQ4H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[6-245.5/0.5]-Z[3,​4,​5,​6,​8,​10]
MCA2FQ6H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-195.5/0.5]-G[6-245.5/0.5]-M[3,​4,​5,​6,​8,​10]
MCA2FQ6H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-195.5/0.5]-G[6-245.5/0.5]-N[3,​4,​5,​6,​8,​10]
MCA2FQ6H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-195.5/0.5]-G[6-245.5/0.5]-Z[3,​4,​5,​6,​8,​10]
MCA2FQ-[20-400/1]-[20-250/1]-[5-29/0.1]
MCA2H-[20-600/1]-[20-500/1]-[5,​7,​10,​12,​15,​20,​25,​30]-F[6-591.5/0.5]-G[4.5-495.5/0.5]-M[3,​4,​5,​6,​8,​10]
MCA2H-[20-600/1]-[20-500/1]-[5,​7,​10,​12,​15,​20,​25,​30]-F[6-591.5/0.5]-G[4.5-495.5/0.5]-N[3,​4,​5,​6,​8,​10]
MCA2H-[20-600/1]-[20-500/1]-[5,​7,​10,​12,​15,​20,​25,​30]-F[6-591.5/0.5]-G[4.5-495.5/0.5]-Z[3,​4,​5,​6,​8]
MCA2HL-[20-600/1]-[20-500/1]-[5,​7,​10,​12,​15,​20,​25,​30]-F[4.5-595.5/0.5]-G[6-491.5/0.5]-M[3,​4,​5,​6,​8,​10]
MCA2HL-[20-600/1]-[20-500/1]-[5,​7,​10,​12,​15,​20,​25,​30]-F[4.5-595.5/0.5]-G[6-491.5/0.5]-N[3,​4,​5,​6,​8,​10]
MCA2HL-[20-600/1]-[20-500/1]-[5,​7,​10,​12,​15,​20,​25,​30]-F[4.5-595.5/0.5]-G[6-491.5/0.5]-Z[3,​4,​5,​6,​8]
MCA4FM-[10-400/0.1]-[10-200/0.1]-[5,​7,​10,​12,​15,​20,​25,​30]
MCA4FN-[10-400/0.1]-[10-200/0.1]-[5,​7,​10,​12,​15,​20,​25,​30]
MCA4FQ-[10-400/0.1]-[10-200/0.1]-[5,​7,​10,​12,​15,​20,​25,​30]
MCA4H-[20-600/1]-[20-500/1]-[5,​7,​10,​12,​15,​20,​25,​30]-F[6-591.5/0.5]-G[6-491.5/0.5]-M[3,​4,​5,​6,​8,​10]
MCA4H-[20-600/1]-[20-500/1]-[5,​7,​10,​12,​15,​20,​25,​30]-F[6-591.5/0.5]-G[6-491.5/0.5]-N[3,​4,​5,​6,​8,​10]
MCA4H-[20-600/1]-[20-500/1]-[5,​7,​10,​12,​15,​20,​25,​30]-F[6-591.5/0.5]-G[6-491.5/0.5]-Z[3,​4,​5,​6,​8]
MCA6FMM-[10-400/0.1]-[10-200/0.1]-[5-29/0.1]
MCA6FMN-[10-400/0.1]-[10-200/0.1]-[5-29/0.1]
MCA6FMQ-[10-400/0.1]-[10-200/0.1]-[5-29/0.1]
MCA6FNM-[10-400/0.1]-[10-200/0.1]-[5-29/0.1]
MCA6FNN-[10-400/0.1]-[10-200/0.1]-[5-29/0.1]
MCA6FNQ-[10-400/0.1]-[10-200/0.1]-[5-29/0.1]
MCA6FQM-[10-400/0.1]-[10-200/0.1]-[5-29/0.1]
MCA6FQN-[10-400/0.1]-[10-200/0.1]-[5-29/0.1]
MCA6FQQ-[10-400/0.1]-[10-200/0.1]-[5-29/0.1]
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSGrade Color Hole Machining Finishing Plate Thickness
(mm)
T Dimension Tolerance AB Dimension Tolerance Material Name A
(mm)
B
(mm)
Counterbored Hole Nominal Dia. [Z] F
(mm)
G
(mm)
Nominal Dia. of Threaded Insert [M] Through Hole Nominal Dia. [N]
1 Piece(s) 12 Day(s) or more 10StandardBlue2 Holes, HorizontalUpper-lower Surface Milling5 ~ 29M (0/-0.2)-MC90120 ~ 40020 ~ 250-6 ~ 391.54.5 ~ 245.53 ~ 10-
1 Piece(s) 12 Day(s) or more 10StandardBlue2 Holes, HorizontalUpper-lower Surface Milling5 ~ 29M (0/-0.2)-MC90120 ~ 40020 ~ 250-6 ~ 391.54.5 ~ 245.5-3 ~ 10
1 Piece(s) 12 Day(s) or more 10StandardBlue2 Holes, HorizontalUpper-lower Surface Milling5 ~ 29M (0/-0.2)-MC90120 ~ 40020 ~ 2503 ~ 106 ~ 391.54.5 ~ 245.5--
1 Piece(s) 12 Day(s) or more 10StandardBlue2 Holes, VerticalUpper-lower Surface Milling5 ~ 29M (0/-0.2)-MC90120 ~ 40020 ~ 250-4.5 ~ 395.56 ~ 245.53 ~ 10-
1 Piece(s) 12 Day(s) or more 10StandardBlue2 Holes, VerticalUpper-lower Surface Milling5 ~ 29M (0/-0.2)-MC90120 ~ 40020 ~ 250-4.5 ~ 395.56 ~ 245.5-3 ~ 10
1 Piece(s) 12 Day(s) or more 10StandardBlue2 Holes, VerticalUpper-lower Surface Milling5 ~ 29M (0/-0.2)-MC90120 ~ 40020 ~ 2503 ~ 84.5 ~ 395.56 ~ 245.5--
1 Piece(s) 12 Day(s) or more 10StandardBlue4HUpper-lower Surface Milling5 ~ 29M (0/-0.2)-MC90120 ~ 40020 ~ 250-6 ~ 391.56 ~ 245.53 ~ 10-
1 Piece(s) 12 Day(s) or more 10StandardBlue4HUpper-lower Surface Milling5 ~ 29M (0/-0.2)-MC90120 ~ 40020 ~ 250-6 ~ 391.56 ~ 245.5-3 ~ 10
1 Piece(s) 12 Day(s) or more 10StandardBlue4HUpper-lower Surface Milling5 ~ 29M (0/-0.2)-MC90120 ~ 40020 ~ 2503 ~ 106 ~ 391.56 ~ 245.5--
1 Piece(s) 12 Day(s) or more 10StandardBlue6HUpper-lower Surface Milling5 ~ 29M (0/-0.2)-MC90120 ~ 40020 ~ 250-6 ~ 195.56 ~ 245.53 ~ 10-
1 Piece(s) 12 Day(s) or more 10StandardBlue6HUpper-lower Surface Milling5 ~ 29M (0/-0.2)-MC90120 ~ 40020 ~ 250-6 ~ 195.56 ~ 245.5-3 ~ 10
1 Piece(s) 12 Day(s) or more 10StandardBlue6HUpper-lower Surface Milling5 ~ 29M (0/-0.2)-MC90120 ~ 40020 ~ 2503 ~ 106 ~ 195.56 ~ 245.5--
1 Piece(s) 10 Day(s) or more 10StandardBlueNo Drilling AlterationUpper-lower Surface Milling5 ~ 29M (0/-0.2)-MC90120 ~ 40020 ~ 250-----
1 Piece(s) 12 Day(s) or more 10StandardBlue2 Holes, HorizontalUpper-lower Surface Milling5 ~ 29N (±0.1)-MC90120 ~ 40020 ~ 250-6 ~ 391.54.5 ~ 245.53 ~ 10-
1 Piece(s) 12 Day(s) or more 10StandardBlue2 Holes, HorizontalUpper-lower Surface Milling5 ~ 29N (±0.1)-MC90120 ~ 40020 ~ 250-6 ~ 391.54.5 ~ 245.5-3 ~ 10
1 Piece(s) 12 Day(s) or more 10StandardBlue2 Holes, HorizontalUpper-lower Surface Milling5 ~ 29N (±0.1)-MC90120 ~ 40020 ~ 2503 ~ 86 ~ 391.54.5 ~ 245.5--
1 Piece(s) 12 Day(s) or more 10StandardBlue2 Holes, VerticalUpper-lower Surface Milling5 ~ 29N (±0.1)-MC90120 ~ 40020 ~ 250-4.5 ~ 395.56 ~ 245.53 ~ 10-
1 Piece(s) 12 Day(s) or more 10StandardBlue2 Holes, VerticalUpper-lower Surface Milling5 ~ 29N (±0.1)-MC90120 ~ 40020 ~ 250-4.5 ~ 395.56 ~ 245.5-3 ~ 10
1 Piece(s) 12 Day(s) or more 10StandardBlue2 Holes, VerticalUpper-lower Surface Milling5 ~ 29N (±0.1)-MC90120 ~ 40020 ~ 2503 ~ 84.5 ~ 395.56 ~ 245.5--
1 Piece(s) 12 Day(s) or more 10StandardBlue4HUpper-lower Surface Milling5 ~ 29N (±0.1)-MC90120 ~ 40020 ~ 250-6 ~ 391.56 ~ 245.53 ~ 10-
1 Piece(s) 12 Day(s) or more 10StandardBlue4HUpper-lower Surface Milling5 ~ 29N (±0.1)-MC90120 ~ 40020 ~ 250-6 ~ 391.56 ~ 245.5-3 ~ 10
1 Piece(s) 12 Day(s) or more 10StandardBlue4HUpper-lower Surface Milling5 ~ 29N (±0.1)-MC90120 ~ 40020 ~ 2503 ~ 106 ~ 391.56 ~ 245.5--
1 Piece(s) 12 Day(s) or more 10StandardBlue6HUpper-lower Surface Milling5 ~ 29N (±0.1)-MC90120 ~ 40020 ~ 250-6 ~ 195.56 ~ 245.53 ~ 10-
1 Piece(s) 12 Day(s) or more 10StandardBlue6HUpper-lower Surface Milling5 ~ 29N (±0.1)-MC90120 ~ 40020 ~ 250-6 ~ 195.56 ~ 245.5-3 ~ 10
1 Piece(s) 12 Day(s) or more 10StandardBlue6HUpper-lower Surface Milling5 ~ 29N (±0.1)-MC90120 ~ 40020 ~ 2503 ~ 106 ~ 195.56 ~ 245.5--
1 Piece(s) 10 Day(s) or more 10StandardBlueNo Drilling AlterationUpper-lower Surface Milling5 ~ 29N (±0.1)-MC90120 ~ 40020 ~ 250-----
1 Piece(s) 12 Day(s) or more 10StandardBlue2 Holes, HorizontalUpper-lower Surface Milling5 ~ 29Q (+0.2/0)-MC90120 ~ 40020 ~ 250-6 ~ 391.54.5 ~ 245.53 ~ 10-
1 Piece(s) 12 Day(s) or more 10StandardBlue2 Holes, HorizontalUpper-lower Surface Milling5 ~ 29Q (+0.2/0)-MC90120 ~ 40020 ~ 250-6 ~ 391.54.5 ~ 245.5-3 ~ 10
1 Piece(s) 12 Day(s) or more 10StandardBlue2 Holes, HorizontalUpper-lower Surface Milling5 ~ 29Q (+0.2/0)-MC90120 ~ 40020 ~ 2503 ~ 106 ~ 391.54.5 ~ 245.5--
1 Piece(s) 12 Day(s) or more 10StandardBlue2 Holes, VerticalUpper-lower Surface Milling5 ~ 29Q (+0.2/0)-MC90120 ~ 40020 ~ 250-4.5 ~ 395.56 ~ 245.53 ~ 10-
1 Piece(s) 12 Day(s) or more 10StandardBlue2 Holes, VerticalUpper-lower Surface Milling5 ~ 29Q (+0.2/0)-MC90120 ~ 40020 ~ 250-4.5 ~ 395.56 ~ 245.5-3 ~ 10
1 Piece(s) 12 Day(s) or more 10StandardBlue2 Holes, VerticalUpper-lower Surface Milling5 ~ 29Q (+0.2/0)-MC90120 ~ 40020 ~ 2503 ~ 84.5 ~ 395.56 ~ 245.5--
1 Piece(s) 12 Day(s) or more 10StandardBlue4HUpper-lower Surface Milling5 ~ 29Q (+0.2/0)-MC90120 ~ 40020 ~ 250-6 ~ 391.56 ~ 245.53 ~ 10-
1 Piece(s) 12 Day(s) or more 10StandardBlue4HUpper-lower Surface Milling5 ~ 29Q (+0.2/0)-MC90120 ~ 40020 ~ 250-6 ~ 391.56 ~ 245.5-3 ~ 10
1 Piece(s) 12 Day(s) or more 10StandardBlue4HUpper-lower Surface Milling5 ~ 29Q (+0.2/0)-MC90120 ~ 40020 ~ 2503 ~ 106 ~ 391.56 ~ 245.5--
1 Piece(s) 12 Day(s) or more 10StandardBlue6HUpper-lower Surface Milling5 ~ 29Q (+0.2/0)-MC90120 ~ 40020 ~ 250-6 ~ 195.56 ~ 245.53 ~ 10-
1 Piece(s) 12 Day(s) or more 10StandardBlue6HUpper-lower Surface Milling5 ~ 29Q (+0.2/0)-MC90120 ~ 40020 ~ 250-6 ~ 195.56 ~ 245.5-3 ~ 10
1 Piece(s) 12 Day(s) or more 10StandardBlue6HUpper-lower Surface Milling5 ~ 29Q (+0.2/0)-MC90120 ~ 40020 ~ 2503 ~ 106 ~ 195.56 ~ 245.5--
1 Piece(s) 10 Day(s) or more 10StandardBlueNo Drilling AlterationUpper-lower Surface Milling5 ~ 29Q (+0.2/0)-MC90120 ~ 40020 ~ 250-----
1 Piece(s) 12 Day(s) or more 10StandardBlue2 Holes, HorizontalCircular Sawing5 ~ 30--MC90120 ~ 60020 ~ 500-6 ~ 591.54.5 ~ 495.53 ~ 10-
1 Piece(s) 12 Day(s) or more 10StandardBlue2 Holes, HorizontalCircular Sawing5 ~ 30--MC90120 ~ 60020 ~ 500-6 ~ 591.54.5 ~ 495.5-3 ~ 10
1 Piece(s) 12 Day(s) or more 10StandardBlue2 Holes, HorizontalCircular Sawing5 ~ 30--MC90120 ~ 60020 ~ 5003 ~ 86 ~ 591.54.5 ~ 495.5--
1 Piece(s) 12 Day(s) or more 10StandardBlue2 Holes, VerticalCircular Sawing5 ~ 30--MC90120 ~ 60020 ~ 500-4.5 ~ 595.56 ~ 491.53 ~ 10-
1 Piece(s) 12 Day(s) or more 10StandardBlue2 Holes, VerticalCircular Sawing5 ~ 30--MC90120 ~ 60020 ~ 500-4.5 ~ 595.56 ~ 491.5-3 ~ 10
1 Piece(s) 12 Day(s) or more 10StandardBlue2 Holes, VerticalCircular Sawing5 ~ 30--MC90120 ~ 60020 ~ 5003 ~ 84.5 ~ 595.56 ~ 491.5--
1 Piece(s) 10 Day(s) or more 10StandardBlueNo Drilling Alteration4-side Milling5 ~ 30-M (0/-0.2)MC90110 ~ 40010 ~ 200-----
1 Piece(s) 10 Day(s) or more 10StandardBlueNo Drilling Alteration4-side Milling5 ~ 30-N (±0.1)MC90110 ~ 40010 ~ 200-----
1 Piece(s) 10 Day(s) or more 10StandardBlueNo Drilling Alteration4-side Milling5 ~ 30-Q (+0.2/0)MC90110 ~ 40010 ~ 200-----
1 Piece(s) 12 Day(s) or more 10StandardBlue4HCircular Sawing5 ~ 30--MC90120 ~ 60020 ~ 500-6 ~ 591.56 ~ 491.53 ~ 10-
1 Piece(s) 12 Day(s) or more 10StandardBlue4HCircular Sawing5 ~ 30--MC90120 ~ 60020 ~ 500-6 ~ 591.56 ~ 491.5-3 ~ 10
1 Piece(s) 12 Day(s) or more 10StandardBlue4HCircular Sawing5 ~ 30--MC90120 ~ 60020 ~ 5003 ~ 86 ~ 591.56 ~ 491.5--
1 Piece(s) 10 Day(s) or more 10StandardBlueNo Drilling Alteration6-surface Milling5 ~ 29M (0/-0.2)M (0/-0.2)MC90110 ~ 40010 ~ 200-----
1 Piece(s) 10 Day(s) or more 10StandardBlueNo Drilling Alteration6-surface Milling5 ~ 29M (0/-0.2)N (±0.1)MC90110 ~ 40010 ~ 200-----
1 Piece(s) 10 Day(s) or more 10StandardBlueNo Drilling Alteration6-surface Milling5 ~ 29M (0/-0.2)Q (+0.2/0)MC90110 ~ 40010 ~ 200-----
1 Piece(s) 10 Day(s) or more 10StandardBlueNo Drilling Alteration6-surface Milling5 ~ 29N (±0.1)M (0/-0.2)MC90110 ~ 40010 ~ 200-----
1 Piece(s) 10 Day(s) or more 10StandardBlueNo Drilling Alteration6-surface Milling5 ~ 29N (±0.1)N (±0.1)MC90110 ~ 40010 ~ 200-----
1 Piece(s) 10 Day(s) or more 10StandardBlueNo Drilling Alteration6-surface Milling5 ~ 29N (±0.1)Q (+0.2/0)MC90110 ~ 40010 ~ 200-----
1 Piece(s) 10 Day(s) or more 10StandardBlueNo Drilling Alteration6-surface Milling5 ~ 29Q (+0.2/0)M (0/-0.2)MC90110 ~ 40010 ~ 200-----
1 Piece(s) 10 Day(s) or more 10StandardBlueNo Drilling Alteration6-surface Milling5 ~ 29Q (+0.2/0)N (±0.1)MC90110 ~ 40010 ~ 200-----
1 Piece(s) 10 Day(s) or more 10StandardBlueNo Drilling Alteration6-surface Milling5 ~ 29Q (+0.2/0)Q (+0.2/0)MC90110 ~ 40010 ~ 200-----

Loading...

 

Basic Information

Material MC Nylon

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)