(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Heavy Load Caster Swivel With Stopper


Product Overview
Economy series Heavy Load Casters, Universal Type with Brake
Caster Material: Urethane (Brownish Red)
MISUMI economy series heavy load caster, a cost-effective choice!

Product Drawing
Dimensional Drawing
■Dimensional Drawing

Recommended product Lock

■Material Table
BodyWheel PartWheel CoreBearing
MaterialSurface TreatmentMaterial (Color)MaterialSurface TreatmentRotating PartWheel Part
Q235Zinc PlatingUrethane (Brownish Red)Q195Zinc PlatingProvidedProvided
Specifications Overview
Part NumberWheel MaterialMounting Height HBEtAllowable Load
(daN)
TypeD
E-CPSS100U
(Urethane)
1424039.54280
1251654539.54380
1501924539.54400
For more information on product specifications and dimensional drawings, please refer to the product catalog on the website.
Product Features
■MISUMI’s heavy load fixed type caster with excellent cost performance!! Save cost when used in large quantities.
■Body material is Q235, and surface treatment is zinc plating. Bearings are provided at the turning part and wheel part of the caster.
■ Advantages of MISUMI economy series casters.
·MISUMI economy series casters are strictly tested in accordance with ANSI ICWM-2018 standard, and the loads are clearly indicated for more assured use.

■Test results under the same allowable load
Recommended product Adjustment Pad
Example of Use
Precautions
■Precautions for Caster Use

【Precautions 1】
Do not exceed the allowable load when using it.
The allowable load in the product catalog is the load speed when manual transportation is carried on a flat ground.

【Precautions 2】Operating Speed
Use intermittently at a speed below the walking speed on a flat road. Please do not use it continuously through power traction or in a hot state
Wheel diameterOperating Speed
75mm or less2km/h or less
100mm or less4km/h or less

【Precautions 3】Stopper
Wear and damage caused by long-term use may unconsciously reduce the function of the stopper, so please pay attention.
Generally speaking, braking force varies with caster material.
Considering the safety of products, please take other measures (wheel stopper, braking part) when especially necessary.

【Precautions 4】Operating Environment
Casters are usually used in the room temperature range.
Do not use in special environment affected by high temperature, low temperature, humidity, acid, alkali, salt, solvent, oil, sea water, medicine, etc.

【Precautions 5】Installation Method
① Please keep the mounting surface as balanced as possible.
② When mounting rotary (universal) casters, the rotary axis should be in a vertical position.
③ When mounting fixed casters, keep the casters parallel to each other.
④ Please confirm the mounting hole and mount it reliably with appropriate bolts and nuts to avoid looseness.
⑤ When mounting screw-in casters, please tighten the hexagonal part of threads with proper torque. If the tightening torque is too large, it will lead to stress concentration in the shaft and cause fracture.
(Refer to the appropriate tightening torque of 20 to 50N・m with a thread diameter of 12mm)
Related Products

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
E-CPSS100-U
E-CPSS125-U
E-CPSS150-U
Part NumberMinimum order quantityVolume DiscountDays to ShipMounting Height H
(mm)
Wheel Dia. D
(Ø)
Allowable Load
(daN)
Wheel Width B
(mm)
B Dimension
(mm)
D Dimension
(mm)
2 Piece(s)Available 10 Day(s) 1421002804040100
2 Piece(s)Available 10 Day(s) 1651253804545125
2 Piece(s)Available 10 Day(s) 1922504004545250

Loading...

  1. 1

Dimensional Drawing
Recommended product Lock
Specification Table
Part NumberWheel MaterialMounting Height HBEtAllowable Load
(daN)
TypeD
E-CPSS100U
(Urethane)
1424039.54280
1251654539.54380
1501924539.54400
For more information on product specifications and dimensional drawings, please refer to the product catalog on the website.

Basic Information

Caster Type Swivel Type Load Range(daN) 320.01~485.00 Stopper (Detail) Swivel Stopper
Wheel Material Polyurethane Fitting Material Steel Plate Length(mm) 114
Plate Width(mm) 100 Load Category Ultra Heavy Load Color Brownish Red

Frequently asked question (FAQ)

Question: Can these economy series casters be used in special environments such as high temperatures?
Answer: The economy series casters cannot be used in special environments such as high temperatures, and can only be used within the room temperature range. Do not use in special environment affected by high temperature, low temperature, humidity, acid, alkali, salt, solvent, oil, sea water, medicine, etc.
Question: Can the economy series casters be used for machine traction?
Answer: The economy series casters cannot be used for machine traction. Please use intermittently at a speed below the walking speed on a flat road. Please do not use continuously through power traction or in a hot state.

Tech Support