(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 8:00 21/4/2024 sampai dengan 5:00 pada tanggal 22/4/2024. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 21/4/2024 to 5:00 (WIB) 22/4/2024. We apologize for the inconvenience.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here

Mitsubishi Electric J4/J3 Series Control Signal (CN1) Harness

Mitsubishi Electric J4/J3 Series Control Signal (CN1) Harness

Click this image to zoom it.

Move the mouse over the image to zoom

  • Mitsubishi Electric J4/J3 Series Control Signal (CN1) Harness
  • Mitsubishi Electric J4/J3 Series Control Signal (CN1) Harness

Harness for control signals with specifiable length

  • For Signal
  • PLC
  • AC Servo
  • MISUMI Original

● The cable length can be freely specified. (terminal wire is fixed at 2 m)
● Since wiring work is only required for the external signal, and not between the servo amplifier and PLC, there is a significant reduction in work processes.
● The external wiring cables also come, as standard, prepared with crimped terminals and mark tubes with signal names, which is very convenient when wiring.

· Conforms to the example of standard connection in position control mode.
Check the connection diagram for the function to be implemented. (>>Click here)
· Parts used are the recommended parts listed in the "Mitsubishi Electric Corporation:
MR-J3-□A Servo Amplifier Technical Data." (Some equivalent products used)
· Cable length goes up to 10 m.


Wiring and Wire Color Page >>Click here
Component Page >>Click here

PDF

Part Number

Configured Part Number is shown.

Specifications

Mitsubishi Electric J4/J3 Series Control Signal (CN1) Harness:Related Image

Compatible AmplifierPLC ManufacturerPLC Compatible UnitOutline
Image
Model
MR-J3-□AMitsubishi Electric Corporation Ltd.QD75-D1(1)SVSM-J3QD1
QD75-D2
(2)SVSM-J3QD2
QD75-D4
AD75P□-S3(1)SVSM-J3AD
A1SD75P□-S3

More Information

Mitsubishi Electric J4/J3 Series Control Signal (CN1) Harness:Related Image

Specified Length (m)~ 0.91 ~ 44.1 ~ 10
Tolerance+20mm+50mm+ 3% of Specified Length
* The tolerance of the specified length is as described above.

Part Number
SVSM-J2AD-[0.2-10/0.1]
SVSM-J2AD-SB-[0.2-10/0.1]
SVSM-J2QD1-[0.2-10/0.1]
SVSM-J2QD1-SB-[0.2-10/0.1]
SVSM-J2QD2-[0.2-10/0.1]
SVSM-J2QD2-SB-[0.2-10/0.1]
SVSM-J3AD-[0.2-10/0.1]
SVSM-J3AD-SB-[0.2-10/0.1]
SVSM-J3QD1-[0.2-10/0.1]
SVSM-J3QD1-SB-[0.2-10/0.1]
SVSM-J3QD2-[0.2-10/0.1]
SVSM-J3QD2-SB-[0.2-10/0.1]
Part NumberMinimum order quantityVolume DiscountDays to ShipSupported amplifiers Supported PLC unit Specified Length
(M)
Specified Length
(m)
1 Piece(s) 17 Day(s) or more MR-J2S-□-0.2 ~ 10-
1 Piece(s) 17 Day(s) or more MR-J2S-□--0.2 ~ 10
1 Piece(s) 17 Day(s) or more MR-J2S-□-0.2 ~ 10-
1 Piece(s) 17 Day(s) or more MR-J2S-□--0.2 ~ 10
1 Piece(s) 17 Day(s) or more MR-J2S-□-0.2 ~ 10-
1 Piece(s) 17 Day(s) or more MR-J2S-□--0.2 ~ 10
1 Piece(s) 17 Day(s) or more MR-J3-□AAD75P□-S3, A1SD75P□-S30.2 ~ 10-
1 Piece(s) 17 Day(s) or more MR-J3-□AAD75P□-S3, A1SD75P□-S3-0.2 ~ 10
1 Piece(s) 17 Day(s) or more MR-J3-□AQD75-D10.2 ~ 10-
1 Piece(s) 17 Day(s) or more MR-J3-□AQD75-D1-0.2 ~ 10
1 Piece(s) 17 Day(s) or more MR-J3-□AQD75-D2, QD75-D40.2 ~ 10-
1 Piece(s) 17 Day(s) or more MR-J3-□AQD75-D2, QD75-D4-0.2 ~ 10

Loading...

  1. 1

Basic Information

Supported equipment Servo Application 1 For Signal Control Connector shape Straight
Outer diameter image Double-ended Cable length designated range(m) 0.2 ~ 10

Tech Support

Wiring parts/Control and PC Parts
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)