(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

High-Speed Steel 0.01 mm Unit Outer Diameter Designated End Mill, 2-Flute / Regular

High-Speed Steel 0.01 mm Unit Outer Diameter Designated End Mill, 2-Flute / Regular

Click this image to zoom it.

Move the mouse over the image to zoom

[Features]
·High-speed steel 2-flute square end mill regular flute length type that allows cutting diameter to be specified in 0.01 mm increments
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Non-Coated
  • 2 Flutes
  • R (Regular)

PDF

High-Speed Steel 0.01 mm Unit Outer Diameter Designated End Mill, 2-Flute / Regular:Related Image

Part Number
DEM2R3-[2.7-2.99/0.01]
DEM2R3.5-[3.15-3.5/0.01]
DEM2R4-[3.6-3.99/0.01]
DEM2R4.5-[4.05-4.49/0.01]
DEM2R5-[4.51-4.99/0.01]
DEM2R5.5-[5.01-5.49/0.01]
DEM2R6-[5.51-5.99/0.01]
DEM2R6.5-[6.01-6.49/0.01]
DEM2R7-[6.51-6.99/0.01]
DEM2R7.5-[7.01-7.49/0.01]
DEM2R8-[7.51-7.99/0.01]
DEM2R8.5-[8.01-8.49/0.01]
DEM2R9-[8.51-8.99/0.01]
DEM2R9.5-[9.01-9.49/0.01]
DEM2R10-[9.51-9.99/0.01]
DEM2R11-[10.01-10.99/0.01]
DEM2R12-[11.01-11.99/0.01]
DEM2R13-[12.01-12.99/0.01]
DEM2R14-[13.01-13.99/0.01]
DEM2R15-[14.01-14.99/0.01]
DEM2R16-[15.01-15.99/0.01]
DEM2R18-[17.01-17.99/0.01]
DEM2R19-[18.01-18.99/0.01]
DEM2R20-[19.01-19.99/0.01]
DEM2R25-[24.01-24.99/0.01]
V-DEM2R3-[2.7-2.99/0.01]
V-DEM2R3.5-[3.15-3.49/0.01]
V-DEM2R4-[3.6-3.99/0.01]
V-DEM2R4.5-[4.05-4.49/0.01]
V-DEM2R5-[4.51-4.99/0.01]
V-DEM2R5.5-[5.01-5.49/0.01]
V-DEM2R6-[5.51-5.99/0.01]
V-DEM2R6.5-[6.01-6.49/0.01]
V-DEM2R7-[6.51-6.99/0.01]
V-DEM2R7.5-[7.01-7.49/0.01]
V-DEM2R8-[7.51-7.99/0.01]
V-DEM2R8.5-[8.01-8.49/0.01]
V-DEM2R9-[8.51-8.99/0.01]
V-DEM2R9.5-[9.01-9.49/0.01]
V-DEM2R10-[9.51-9.99/0.01]
V-DEM2R11-[10.01-10.99/0.01]
V-DEM2R12-[11.01-11.99/0.01]
V-DEM2R13-[12.01-12.99/0.01]
V-DEM2R14-[13.01-13.99/0.01]
V-DEM2R15-[14.01-14.99/0.01]
V-DEM2R16-[15.01-15.99/0.01]
V-DEM2R18-[17.01-17.99/0.01]
V-DEM2R19-[18.01-18.99/0.01]
V-DEM2R20-[19.01-19.99/0.01]
V-DEM2R25-[24.01-24.99/0.01]
Part NumberMinimum order quantityVolume DiscountDays to ShipOuter Diameter (D)
(φ)
Flute Length (ℓ)
(mm)
Shank Diameter (d)
(mm)
Coating Overall Length (L)
(mm)
No. Length Under Neck (θ)
1 Piece(s) 10 Day(s) or more 2.7 ~ 2.99106Non-Coated50315°
1 Piece(s) 10 Day(s) or more 3.15 ~ 3.5128Non-Coated603.515°
1 Piece(s) 10 Day(s) or more 3.6 ~ 3.99128Non-Coated60415°
1 Piece(s) 10 Day(s) or more 4.05 ~ 4.49158Non-Coated604.515°
1 Piece(s) 10 Day(s) or more 4.51 ~ 4.99158Non-Coated60515°
1 Piece(s) 10 Day(s) or more 5.01 ~ 5.49158Non-Coated605.515°
1 Piece(s) 10 Day(s) or more 5.51 ~ 5.99158Non-Coated60615°
1 Piece(s) 10 Day(s) or more 6.01 ~ 6.492010Non-Coated606.515°
1 Piece(s) 10 Day(s) or more 6.51 ~ 6.992010Non-Coated60715°
1 Piece(s) 10 Day(s) or more 7.01 ~ 7.492010Non-Coated607.515°
1 Piece(s) 10 Day(s) or more 7.51 ~ 7.992010Non-Coated60815°
1 Piece(s) 10 Day(s) or more 8.01 ~ 8.492510Non-Coated708.515°
1 Piece(s) 10 Day(s) or more 8.51 ~ 8.992510Non-Coated70915°
1 Piece(s) 10 Day(s) or more 9.01 ~ 9.492510Non-Coated709.515°
1 Piece(s) 10 Day(s) or more 9.51 ~ 9.992510Non-Coated7010-
1 Piece(s) 10 Day(s) or more 10.01 ~ 10.993012Non-Coated801115°
1 Piece(s) 10 Day(s) or more 11.01 ~ 11.993012Non-Coated8012-
1 Piece(s) 10 Day(s) or more 12.01 ~ 12.993512Non-Coated8513-
1 Piece(s) 10 Day(s) or more 13.01 ~ 13.993516Non-Coated901415°
1 Piece(s) 10 Day(s) or more 14.01 ~ 14.994016Non-Coated951515°
1 Piece(s) 10 Day(s) or more 15.01 ~ 15.994016Non-Coated9516-
1 Piece(s) 10 Day(s) or more 17.01 ~ 17.994016Non-Coated9518-
1 Piece(s) 10 Day(s) or more 18.01 ~ 18.994520Non-Coated1101915°
1 Piece(s) 10 Day(s) or more 19.01 ~ 19.994520Non-Coated11020-
1 Piece(s) 10 Day(s) or more 24.01 ~ 24.996025Non-Coated13025-
1 Piece(s) 16 Day(s) or more 2.7 ~ 2.99106TiCN50315°
1 Piece(s) 16 Day(s) or more 3.15 ~ 3.49128TiCN603.515°
1 Piece(s) 16 Day(s) or more 3.6 ~ 3.99128TiCN60415°
1 Piece(s) 16 Day(s) or more 4.05 ~ 4.49158TiCN604.515°
1 Piece(s) 16 Day(s) or more 4.51 ~ 4.99158TiCN60515°
1 Piece(s) 16 Day(s) or more 5.01 ~ 5.49158TiCN605.515°
1 Piece(s) 16 Day(s) or more 5.51 ~ 5.99158TiCN60615°
1 Piece(s) 16 Day(s) or more 6.01 ~ 6.492010TiCN606.515°
1 Piece(s) 16 Day(s) or more 6.51 ~ 6.992010TiCN60715°
1 Piece(s) 16 Day(s) or more 7.01 ~ 7.492010TiCN607.515°
1 Piece(s) 16 Day(s) or more 7.51 ~ 7.992010TiCN60815°
1 Piece(s) 16 Day(s) or more 8.01 ~ 8.492510TiCN708.515°
1 Piece(s) 16 Day(s) or more 8.51 ~ 8.992510TiCN70915°
1 Piece(s) 16 Day(s) or more 9.01 ~ 9.492510TiCN709.515°
1 Piece(s) 16 Day(s) or more 9.51 ~ 9.992510TiCN7010-
1 Piece(s) 16 Day(s) or more 10.01 ~ 10.993012TiCN801115°
1 Piece(s) 16 Day(s) or more 11.01 ~ 11.993012TiCN8012-
1 Piece(s) 16 Day(s) or more 12.01 ~ 12.993512TiCN8513-
1 Piece(s) 16 Day(s) or more 13.01 ~ 13.993516TiCN901415°
1 Piece(s) 16 Day(s) or more 14.01 ~ 14.994016TiCN951515°
1 Piece(s) 16 Day(s) or more 15.01 ~ 15.994016TiCN9516-
1 Piece(s) 16 Day(s) or more 17.01 ~ 17.994016TiCN9518-
1 Piece(s) 16 Day(s) or more 18.01 ~ 18.994520TiCN1101915°
1 Piece(s) 16 Day(s) or more 19.01 ~ 19.994520TiCN11020-
1 Piece(s) 16 Day(s) or more 24.01 ~ 24.996025TiCN13025-

Loading...

  1. 1

Specifications

High-Speed Steel 0.01 mm Unit Outer Diameter Designated End Mill, 2-Flute / Regular:Related Image

Model Number   Outer Diameter
D
0.01 mm Increment Designation
Flute Length
Under Neck Angle
θ
Overall Length
L
Shank Diameter
d
No.
DEM2R
(Non-Coated Type)

V-DEM2R
(TiCN Coating Type)
3 2.70 ~2.99 10 15° 50 6
3.5 3.15 ~3.49 12 15° 60 8
4 3.60 ~3.99 12 15° 60 8
4.5 4.05 ~4.49 15 15° 60 8
5 4.51 ~4.99 15 15° 60 8
5.5 5.01 ~5.49 15 15° 60 8
6 5.51 ~5.99 15 15° 60 8
6.5 6.01 ~6.49 20 15° 60 10
7 6.51 ~6.99 20 15° 60 10
7.5 7.01 ~7.49 20 15° 60 10
8 7.51 ~7.99 20 15° 60 10
8.5 8.01 ~8.49 25 15° 70 10
9 8.51 ~8.99 25 15° 70 10
9.5 9.01 ~9.49 25 15° 70 10
10 9.51 ~9.99 25 70 10
11 10.01 ~ 10.99 30 15° 80 12
12 11.01 ~ 11.99 30 80 12
13 12.01 ~ 12.99 35 85 12
14 13.01 ~ 13.99 35 15° 90 16
15 14.01 ~ 14.99 40 15° 95 16
16 15.01 ~ 15.99 40 95 16
18 17.01 ~ 17.99 40 95 16
19 18.01 ~ 18.99 45 15° 110 20
20 19.01 ~ 19.99 45 110 20
25 24.01 ~ 24.99 60 130 25


For Cutting Conditions, Refer to >>Click here.

Basic Information

Work Material General Steel / Heat-Treated Steel / Cast Iron / Aluminum / Copper Type of Flute Square Number of Flutes(sheet) 2
Tool Material Type Cobalt High-Speed Steel Processing Applications Flat Surface / Side Surface / Groove / Countersunk Torsion Angle (θ) Standard Helix (30 to 40°)
Base-Blade Availability Included Tolerance(mm) 0 ~ -0.03

Tech Support

Cutting Tool/Industrial Processing Part
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)