(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Hit Hose

Hit Hose

A lightweight urethane hose. Ideal for moving-air tools. Features excellent cold resistance and is soft and easy to handle, even in the winter.

(i)Caution

  • The product images are representative only. Specifications may differ for each part number, including shape and color.

PDF

Japanese Only

Part Number

Configured Part Number is shown.

Drawing

HB type hit hose drawing

Product Specifications

ApplicationHoses for various air tools (Impact wrenches, air drivers, spray guns, etc.)
FluidAir
Main materialPolyurethane resinReinforcementsPolyester thread
FunctionNo need for separate disposal: Very good, Oil resistant: Good, Flexibility: Good, Pneumatic transmission: Very good
Operating temperature range-20°C to 60°C (HS-5 only -20 to 30°C)
Inner Diameter5 to 10 mm
ColoringWhite, red, green, blue

Standard Table

Part NumberI.D.×O.D.Operating pressureOperating temperature rangeStandard size weightStandard scaleMinimum bending radiusPackagingColoring
mmMpa°CKg / volumemmm
HS-55 × 80 to 0.7-20 to 304.010030Bobbin reelWhite
HB-66.5 × 100 to 1.5-20 to 606.010040Bobbin reelRed, blue
HB-6100.610Film rollRed
HB-6201.220
HB-6301.830
HB-6503.050
HB-77 × 100 to 1.06.010050Bobbin reelGreen
HB-88.5 × 12.50 to 1.59.010055Bobbin reelRed, blue
HB-8100.910Film rollRed
HB-8201.820
HB-8302.730
HB-1010 × 14.511.510070Bobbin reelBlue

Product Features Details

Advantages of use 1

  • Lightweight makes it ideal for mobile air tools.
  • High oil resistance compared to rubber hoses or PVC hoses, long lifespan without hardening or cracking due to oil.

Advantages of use 2

  • High cold resistance allows work without hardening even in winter, improving workability.

Compliant with laws and regulations to ensure safe and secure.

  • Compliant with revised RoHS2 regulations.

Improved productivity and safety with dedicated fittings.

  • Various types of dedicated fittings are easy to install, prevent fluid leakage and hose disconnection for safe and secure.

Cautions/Prohibitions

1. The operating fluid used is dedicated for air. Do not use the hose for any other purpose.
 * Do not use it for fuel oil (heavy oil, light oil, kerosene, gasoline, etc.) or solvents.
2. Do not use it for drinking or food.
3. It is expected that the compounding agent, etc., may be extracted or eluted from the hose depending on the conditions of use, so check the usage conditions and the effect on the product before use.
4. Use the hose within the operating temperature range.
5. Use the hose within the working pressure range.
6. This hose should be used with a minimum bending radius or greater. If used below the minimum bending radius, the hose may bend, or the pressure resistance may decrease.
7. Do not directly touch or approach open flames.
8. When cutting the hose, make sure to cut it so that the end face is vertical. If it is not vertical, leakage or disconnection may occur.
9. Use a hose nipple suitable for the hose size. Do not use nipples with scratches or rust on their surface.
10. The use of hose fittings and hose clamps dedicated for Toyox is recommended. If you do not use the Toyox dedicated products, air may leak or the metal fittings may come off. Retighten the hose
 clamp as necessary.
 Distortion of the resin in the clamp-tightening area may cause air leakage or hose disconnection. Do not overtighten steel wire, etc., as it may cut the inner and outer surfaces of the hose and cause the hose to burst.
11. Do not use one-push metal fittings for tubes. It may cause the hose to burst.
12. The lifespan of the hose is greatly susceptible to the physical properties of the fluid, temperature, flow rate, frequency of pressurization and depressurization.
 If any of the following abnormalities or signs of abnormalities are found during pre-startup or periodic inspections, stop using the product immediately and have it repaired or replaced with a new hose.
 ·Abnormality near the metal fittings: Local stretching, curvature, leaks, blisters, shallow insertion into nipples
 ·Presence or absence of scratch: Large scratches and cracks on the outer surface, immersion into the reinforcement layer
 ·Inner surface abnormality: Inner surface swelling and separation and wear (exposed reinforcement in the hose)
 (*) In the case of abnormalities on the inner or outer surface, the fluid may contain hose separations or fragments of reinforcement material.
 ·Other significant changes (hardening, swelling, cracking, blistering, etc.)
13. Do not store it outdoors or in direct sunlight. This may cause quality deterioration such as stickiness and cracks on the hose surface.
 Store in a well-ventilated place with low humidity. Do not allow contaminants or dust to enter the hose.
14. Do not incinerate. Burning the product may damage the incinerator or produce gas harmful to the human body. Please handle it as industrial waste.
15. When disposing the product, follow the separate disposal procedures of each region.

Product Comparison Information

Dedicated fitting

Hose
Product number
Hose SizeHit-dedicated metal fittingsSingle-action joint (easy joint)
Internal diameterOuter diameterRotating metal fitting female
With spring
Rotating metal fitting femaleFixing bracket maleFixing bracket femaleLock SocketPurge PlugIntermediate Joint
HS-558
HB-66.510
HB-7710
HB-88.512.5
HB-101014.5
Part Number
HB-6
HB-6B
HB-7
HB-8
HB-8B
HB-8B-L10
HB-10
HB-610
HB-620
HB-630
HB-650
HB-810
HB-820
HB-830
Part NumberMinimum order quantityVolume DiscountDays to ShipRoHSCutting Service Usage Nominal I.D. d Outer Dia. D
(Ø)
Color Minimum Bending Radius
(mm)
Operating Pressure Range
(MPa)
Standard Length
(m)
1 Piece(s) 15 Day(s) or more 10No610Red400~1.5100
1 Piece(s) 15 Day(s) or more 10No610Blue400~1.5100
1 Piece(s) 10 Day(s) or more 10No710Green500~1100
1 Piece(s) 20 Day(s) or more 10No812.5Red550~1.5100
1 Piece(s) 15 Day(s) or more -No812.5Blue550~1.5100
1 Piece(s) 8 Day(s) or more -Presence812.5Blue550~1.510
1 Piece(s) 15 Day(s) or more 10No1014.5Blue700~1.5100
1 Piece(s) 8 Day(s) or more 10No610Red400~1.510
1 Piece(s) 8 Day(s) or more 10No610Red400~1.520
1 Piece(s) 8 Day(s) or more 10No610Red400~1.530
1 Piece(s) 14 Day(s) or more 10No610Red400~1.550
1 Piece(s) 8 Day(s) or more 10No812.5Red550~1.510
1 Piece(s) 8 Day(s) or more 10No812.5Red550~1.520
1 Piece(s) 8 Day(s) or more 10No812.5Red550~1.530

Loading...

  1. 1
 

Basic Information

Applicable Fluid / Usage Air Properties Pressure Resistance / Cold Resistance / Oil Resistance / Flexibility Hose Material Polyurethane
Mounting Metal Fittings No Operating Temperature Range(°C) -20::60

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)