(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
9.5 Million Products, 1,600 Brands, Free Shipping,
63,000 Stock items for Same Day Shipping
63,000 Stock items for Same Day Shipping
9.5 Juta Produk, 1,600 Merek, Gratis Pengiriman,
63,000 Item Stok untuk Pengiriman di Hari yang Sama
63,000 Item Stok untuk Pengiriman di Hari yang Sama
021-8984-0008
021-8984-0008
8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)
8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
Order/Quote
?
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here - Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998
Angular Ball Bearing
- On Sale Till 31/03/2025
Angular ball bearings that can receive a certain amount of axial (axial direction) load.
[Features]
・ The straight line connecting the contact points between the ball and the inner and outer rings has an angle with respect to the radial direction.
・ Radial load and unidirectional axial load can be applied.
・ When a radial load acts, an axial component force is generated, so 2 are generally used facing each other.
[Applications]
・ Ideal for machine tools, feed screw mechanisms, ball screw support units, etc.
- STOCK
(i)Caution
- The value in the "Width (mm)" column of the product specifications is the value for a single column even in the case of a combination of multiple columns. (Catalog B dimension)Please note that the width of the actual multi-row combination is twice the stated dimension (2B).
Part Number
Configured Part Number is shown.
Drawing
Mounting dimensional drawing
Mounting dimensional drawing
Product features details
This permissible rotational speed is the permissible rotational speed that can be achieved based on the following assumptions.
・ Using
under conditions where an appropriate amount of grease is sealed, and the heat generated by sufficient familiar operation, cooling of the outer cylinder, etc., is removed.
・ Use with constant pressure preload.
・ Using
under conditions where an appropriate amount of grease is sealed, and the heat generated by sufficient familiar operation, cooling of the outer cylinder, etc., is removed.
・ Use with constant pressure preload.
Type, structure and features of angular ball bearings
Angular ball bearings are non-separable bearings, and the straight line connecting the contact points between the ball and the inner and outer rings has a certain angle (contact angle) with respect to the radial direction. (Refer to Figure 1)The contact angle and contact angle symbol are shown in Table 1.
A radial load and a unidirectional axial load can be applied. Also, when a radial load acts, an axial component force is generated, so two are generally used facing each other. Table 2 shows the angular ball bearing,
Table 3 shows the combination angular ball bearings. For bearings with a contact angle of 15° and bearing accuracy of JIS 5 class or higher, refer to Precision Rolling Bearing (CAT. No. 2260/J).
Angular Ball Bearing
| Contact Angle | 15° | 30° | 40° |
|---|---|---|---|
| Symbol of contact angle | C | A1) | B |
*1) Contact angle symbol A is omitted.
Table 2 Classification and characteristics of angular ball bearings
| Classification | Features |
|---|---|
| Standard type | ・ The bearing series includes 79, 70, 72, 72B, 73 and 73B. ・ The contact angles are 30° and 40° (with B). ・ The standard retainer type depends on the bearing model number. (Please refer to Table 4) |
Table 3 Combination type and features of combination angular ball bearings
| Combination Type | Features |
|---|---|
| Back combination (DB) | ・ It can receive radial load and axial load in both directions. ・ Since the distance l between the working points of the bearing is large, the load capacity of the moment load is large. ・ The allowable tilt angle is small. |
| Front combination (DF) | ・ It can receive radial load and axial load in both directions. ・ The distance l between the working points of the bearing is small, and the load capacity of the moment load is small. ・ The permissible tilt angle is larger than the back combination. |
| Parallel combination (DT) | ・ It can receive radial load and unidirectional axial load. ・ Since 2 pieces receive an axial load, a large axial load can be received |
Remarks 1. Since the bearings are manufactured as a set to adjust the internal clearance or preload amount of the bearings, bearings with the same product number must be used in combination.
Table 4 Standard retainer type for angular ball bearings
| Classification | Bearing series | Resin molding retainer | Pressed retainer | Machined retainer |
|---|---|---|---|---|
| Standard type | 79 70 72 73 72B 73B | 7904 to 7913 7000 to 7024 ― ― ― ― | ― ― 7200 to 7222 7300 to 7322 7200B~7222B 7300B~7322B | 7914 to 7960 7026 to 7040 7224 to 7240 7324 to 7340 7224B~7240B 7324B~7340B |
Note: The resin molding retainer cannot be used at high temperatures exceeding 120°C due to its material properties.
| Part Number |
|---|
| 7000DF/GN |
| 7010L1 |
| 7011L1 |
| 7016 |
| 7016DB/GL |
| 7018B |
| 7201DF |
| 7202DF |
| 7203BG |
| 7203DF |
| 7204DF |
| 7205DB/GN |
| 7208L1 |
| 7209DF |
| 7210DB/GN |
| 7211DB/GN |
| 7216BG |
| 7226 |
| 7230 |
| 7305DF |
| 7308L1 |
| 7914UCP5 |
| 7916UCP4 |
| Part Number | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Raceway Ring Shape | Inner/Outer Ring Material | Bearing Type | Outer Ring Type | Precision (JIS) | Inner Dia. d (Ø) | Outer Dia. D (Ø) | Width B (mm) | Basic Dynamic Load Rating (N) | Max. Allowable Rotational Speed (rpm) | Specifications/Environment | Load Direction | Number of Raceway Ring Rows | Size Standards | Rolling Element Material | Combination of Angular Contact Ball Bearings | Retainer Type | Sealing Structure | Types | Ordering Code | Contact angle symbol | Combination symbol | Preload Mark | Accuracy Symbol | Holder Symbol | Internal change symbol |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 Piece(s) | 16 Day(s) or more | 10 | Angular Contact Ball (Double Row) | Steel | Open Type | Flat | Grade 0 | 10 | 26 | 16 | 7500 | 23000 | Standard | Radial / Thrust | Double Row | Metric System | Steel | Front Combination | Resin Forming | - | 7*** series | - | A | DF | /GN | - | - | - | ||
| 1 Piece(s) | 11 Day(s) or more | 10 | Angular Contact Ball (Single Row) | Steel | Open Type | Flat | Grade 0 | 50 | 80 | 16 | 23700 | 8600 | Standard | Radial / Thrust | Single Row | Metric System | Steel | - | Momi removing | - | 7*** series | - | A | - | - | - | L1 | - | ||
| 1 Piece(s) | 11 Day(s) or more | 10 | Angular Contact Ball (Single Row) | Steel | Open Type | Flat | Grade 0 | 55 | 90 | 18 | 31000 | 7900 | Standard | Radial / Thrust | Single Row | Metric System | Steel | - | Momi removing | - | 7*** series | - | A | - | - | - | L1 | - | ||
| 1 Piece(s) | 8 Day(s) | 10 | Angular Contact Ball (Single Row) | Steel | Open Type | Flat | Grade 0 | 80 | 125 | 22 | 53500 | 5500 | Standard | Radial / Thrust | Single Row | Metric System | Steel | - | Resin Forming | - | 7*** series | 819-6232 | A | - | - | - | - | - | ||
| 1 Piece(s) | Quote | 10 | Angular Contact Ball (Double Row) | Steel | Open Type | Flat | Grade 0 | 80 | 125 | 44 | 86500 | 4400 | Standard | Radial / Thrust | Double Row | Metric System | Steel | Back Combination | Resin Forming | - | 7*** series | - | A | DB | /GL | - | - | - | ||
| 1 Piece(s) | 11 Day(s) or more | 10 | Angular Contact Ball (Single Row) | Steel | Open Type | Flat | Grade 0 | 90 | 140 | 24 | 65000 | 4900 | Standard | Radial / Thrust | Single Row | Metric System | Steel | - | Resin Forming | - | 7*** series | - | B | - | - | - | - | - | ||
| 1 Piece(s) | 16 Day(s) or more | 10 | Angular Contact Ball (Double Row) | Steel | Open Type | Flat | Grade 0 | 12 | 32 | 20 | 12300 | 20000 | Standard | Radial / Thrust | Double Row | Metric System | Steel | Front Combination | Punching | - | 7*** series | - | A | DF | - | - | - | - | ||
| 1 Piece(s) | Same day | 10 | Angular Contact Ball (Double Row) | Steel | Open Type | Flat | Grade 0 | 15 | 35 | 22 | 14700 | 17000 | Standard | Radial / Thrust | Double Row | Metric System | Steel | Front Combination | Punching | - | 7*** series | - | A | DF | - | - | - | - | ||
| 1 Piece(s) | 11 Day(s) or more | 10 | Angular Contact Ball (Single Row) | Steel | Open Type | Flat | Grade 0 | 17 | 40 | 12 | 11000 | 17000 | Standard | Radial / Thrust | Single Row | Metric System | Steel | - | Punching | - | 7*** series | 819-6316 | B | G | - | - | - | - | ||
| 1 Piece(s) | 11 Day(s) or more | 10 | Angular Contact Ball (Double Row) | Steel | Open Type | Flat | Grade 0 | 17 | 40 | 24 | 19400 | 15000 | Standard | Radial / Thrust | Double Row | Metric System | Steel | Front Combination | Punching | - | 7*** series | - | A | DF | - | - | - | - | ||
| 1 Piece(s) | 16 Day(s) or more | 10 | Angular Contact Ball (Double Row) | Steel | Open Type | Flat | Grade 0 | 20 | 47 | 28 | 23600 | 14000 | Standard | Radial / Thrust | Double Row | Metric System | Steel | Front Combination | Punching | - | 7*** series | - | A | DF | - | - | - | - | ||
| 1 Piece(s) | 16 Day(s) or more | 10 | Angular Contact Ball (Double Row) | Steel | Open Type | Flat | Grade 0 | 25 | 52 | 30 | 26300 | 11000 | Standard | Radial / Thrust | Double Row | Metric System | Steel | Back Combination | Punching | - | 7*** series | - | A | DB | /GN | - | - | - | ||
| 1 Piece(s) | 11 Day(s) or more | 10 | Angular Contact Ball (Single Row) | Steel | Open Type | Flat | Grade 0 | 40 | 80 | 18 | 35500 | 9600 | Standard | Radial / Thrust | Single Row | Metric System | Steel | - | Punching | - | 7*** series | - | A | - | - | - | L1 | - | ||
| 1 Piece(s) | 16 Day(s) or more | 10 | Angular Contact Ball (Double Row) | Steel | Open Type | Flat | Grade 0 | 45 | 85 | 38 | 64500 | 6900 | Standard | Radial / Thrust | Double Row | Metric System | Steel | Front Combination | Punching | - | 7*** series | - | A | DF | - | - | - | - | ||
| 1 Piece(s) | 16 Day(s) or more | 10 | Angular Contact Ball (Double Row) | Steel | Open Type | Flat | Grade 0 | 50 | 90 | 40 | 67000 | 6300 | Standard | Radial / Thrust | Double Row | Metric System | Steel | Back Combination | Punching | - | 7*** series | - | A | DB | /GN | - | - | - | ||
| 1 Piece(s) | 12 Day(s) or more | 10 | Angular Contact Ball (Double Row) | Steel | Open Type | Flat | Grade 0 | 55 | 100 | 42 | 83000 | 5700 | Standard | Radial / Thrust | Double Row | Metric System | Steel | Back Combination | Punching | - | 7*** series | - | A | DB | /GN | - | - | - | ||
| 1 Piece(s) | 11 Day(s) or more | 10 | Angular Contact Ball (Single Row) | Steel | Open Type | Flat | Grade 0 | 80 | 140 | 26 | 80500 | 4300 | Standard | Radial / Thrust | Single Row | Metric System | Steel | - | Punching | - | 7*** series | 819-6341 | B | G | - | - | - | - | ||
| 1 Piece(s) | 19 Day(s) or more | 10 | Angular Contact Ball (Single Row) | Steel | Open Type | Flat | Grade 0 | 130 | 230 | 40 | 196000 | 3000 | Standard | Radial / Thrust | Single Row | Metric System | Steel | - | Momi removing | - | 7*** series | 819-6250 | A | - | - | - | - | - | ||
| 1 Piece(s) | 11 Day(s) or more | 10 | Angular Contact Ball (Single Row) | Steel | Open Type | Flat | Grade 0 | 150 | 270 | 45 | 232000 | 2500 | Standard | Radial / Thrust | Single Row | Metric System | Steel | - | Momi removing | - | 7*** series | 819-6254 | A | - | - | - | - | - | ||
| 1 Piece(s) | 12 Day(s) or more | 10 | Angular Contact Ball (Double Row) | Steel | Open Type | Flat | Grade 0 | 25 | 62 | 34 | 43000 | 10000 | Standard | Radial / Thrust | Double Row | Metric System | Steel | Front Combination | Punching | - | 7*** series | - | A | DF | - | - | - | - | ||
| 1 Piece(s) | 11 Day(s) or more | 10 | Angular Contact Ball (Single Row) | Steel | Open Type | Flat | Grade 0 | 40 | 90 | 23 | 49000 | 8600 | Standard | Radial / Thrust | Single Row | Metric System | Steel | Single Row | Momi removing | - | 7*** series | - | A | - | - | - | L1 | - | ||
| 1 Piece(s) | 16 Day(s) or more | 10 | Angular Contact Ball (Single Row) | Steel | Open Type | Flat | Grade 5 | 70 | 100 | 16 | 26200 | 6700 | Standard | Radial / Thrust | Single Row | Metric System | Steel | - | Resin Forming | - | Bearing for the main shaft | - | C | - | - | P5 | - | U | ||
| 1 Piece(s) | 10 Day(s) or more | 10 | Angular Contact Ball (Single Row) | Steel | Open Type | Flat | Grade 4 | 80 | 110 | 16 | 26900 | 5900 | Standard | Radial / Thrust | Single Row | Metric System | Steel | - | Resin Forming | - | Bearing for the main shaft | - | C | - | - | P4 | - | U |
Loading...
Specification/Dimensions
-
Raceway Ring Shape
-
Angular Contact Ball (Single Row) -
Angular Contact Ball (Double Row)
-
-
Inner/Outer Ring Material
- Steel
-
Bearing Type
-
Open Type
-
-
Outer Ring Type
- Flat
-
Precision (JIS)
- Grade 0
- Grade 4
- Grade 5
-
Inner Dia. d(Ø)
-
Outer Dia. D(Ø)
-
Width B(mm)
-
Basic Dynamic Load Rating(N)
- 5,100
- 7,600
- 8,300
- 9,400
- 9,700
- 28,500
- 33,500
- 36,000
- 36,500
- 40,000
- 41,500
- 3660$8200
- 4650
- 5000
- 5050
- 5450
- 5800
- 7000
- 7150
- 7500
- 7550
- 7600
- 8350
- 8800
- 9050
- 9400
- 9500
- 10100
- 10500
- 10700
- 11000
- 11200
- 11400
- 11600
- 12000
- 12300
- 12500
- 13300
- 13600
- 13900
- 14500
- 14700
- 14800
- 15800
- 15900
- 16200
- 17300
- 17500
- 18700
- 18800
- 19400
- 20300
- 20500
- 21900
- 22300
- 22500
- 23600
- 23700
- 24400
- 25900
- 26200
- 26300
- 26400
- 26900
- 27100
- 28500
- 29700
- 30500
- 31000
- 32000
- 33500
- 35500
- 36000
- 36500
- 37500
- 38500
- 39500
- 40000
- 41500
- 42500
- 43000
- 43500
- 45000
- 46500
- 48500
- 49000
- 50000
- 50500
- 51000
- 52000
- 53500
- 54500
- 55000
- 56000
- 57500
- 58500
- 59500
- 61500
- 63500
- 64500
- 65000
- 67000
- 68000
- 68500
- 69000
- 69500
- 70500
- 71000
- 71500
- 73000
- 74500
- 76500
- 79000
- 79500
- 80500
- 83000
- 86000
- 86500
- 89000
- 90000
- 95000
- 98000
- 100000
- 102000
- 103000
- 107000
- 114000
- 121000
- 124000
- 125000
- 128000
- 130000
- 135000
- 139000
- 146000
- 155000
- 156000
- 159000
- 165000
- 166000
- 167000
- 171000
- 177000
- 183000
- 186000
- 190000
- 196000
- 202000
- 203000
- 207000
- 212000
- 219000
- 225000
- 232000
- 233000
- 236000
- 239000
- 250000
- 258000
- 272000
- 276000
- 277000
- 297000
- 310000
-
Specifications/Environment
- Standard
-
Number of Raceway Ring Rows
- Single Row
- Double Row
-
Size Standards
- Metric System
-
Rolling Element Material
- Steel
-
Combination of Angular Contact Ball Bearings
-
Single Row -
Back Combination -
Front Combination -
Parallel Combination
-
-
Retainer Type
- Punching
- Momi removing
- Resin Forming
-
Sealing Structure
- No seal
-
Types
-
type
- 70**
- 72**
- 73**
- 79**
- 79**U
-
Load Direction
- Radial
- Thrust
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- Same day
- 1 Day(s) or Less
- 8 Day(s) or Less
- 10 Day(s) or Less
- 11 Day(s) or Less
- 12 Day(s) or Less
- 14 Day(s) or Less
- 15 Day(s) or Less
- 16 Day(s) or Less
- 19 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：021-8990-4102 / FAX：021-8990-5803
- 8:30am - 5:30pm (Monday - Friday)
- Technical Inquiry
-
Credit Card
Kartu Kredit
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy