(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

9.5 Million Products, 1,600 Brands, Free Shipping,
63,000 Stock items for Same Day Shipping

9.5 Juta Produk, 1,600 Merek, Gratis Pengiriman,
63,000 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

Filter Regulator AW10-A To AW40-A

Click this image to zoom it.

Move the mouse over the image to zoom

SMC

SMC modular-type F.R.L. combination unit.
[Features]
· Uses a transparent bowl guard.
· A transparent bowl guard with improved environmental resistance that provides all-round protection.
· The manufacturer has removed the window from the bowl guard and instead covered the entire internal bowl with a polycarbonate transparent bowl guard.
· Now, even if the environment changes and the bowl is exposed to corrosive chemicals or oil, the foreign matter will not stick directly to the pressurized bowl. This can help reduce the risk of the bowl breaking.
· Superior visibility: 360°
· The use of the transparent bowl guard allows you to check the status of the drain inside the filter bowl and to check the amount of residual oil in the lubricator from any angle
· Without corrosion. The use of a resin body ensures there is no rusting.

(i)Caution

Refer to the catalog for details on product specifications.
The products shown in the image are representative. CAD data is not supported for some model numbers.

Part Number

Configured Part Number is shown.

: 30; 45; 60

Part Number
AW20-01-1-A
AW20-01-1C-A
AW20-01-1N-A
AW20-01-1NR-A
AW20-01-2-A
AW20-01-2N-A
AW20-01-6C-A
AW20-01-6R-A
AW20-01-12NR-A
AW20-01-12R-A
AW20-01-A
AW20-01-A-X2068
AW20-01-C-A
AW20-01-J-A
AW20-01-N-A
AW20-01-R-A
AW20-01B-1-A
AW20-01B-1C-A
AW20-01B-1N-A
AW20-01B-1R-A
AW20-01B-2-A
AW20-01B-2N-A
AW20-01B-2R-A
AW20-01B-6-A
AW20-01B-6C-A
AW20-01B-6CR-A
AW20-01B-A
AW20-01B-C-A
AW20-01B-CR-A
AW20-01B-J-A
AW20-01B-JR-A
AW20-01B-N-A
AW20-01B-R-A
AW20-01BC-1-A
AW20-01BC-2-A
AW20-01BC-2N-A
AW20-01BC-6-A
AW20-01BC-12-A
AW20-01BC-A
AW20-01BC-C-A
AW20-01BC-CR-A
AW20-01BC-N-A
AW20-01BC-R-A
AW20-01BCG-1-A
AW20-01BCG-1C-A
AW20-01BCG-1CN-A
AW20-01BCG-1N-A
AW20-01BCG-2-A
AW20-01BCG-2N-A
AW20-01BCG-2R-A
AW20-01BCG-6-A
AW20-01BCG-12-A
AW20-01BCG-16C-A
AW20-01BCG-A
AW20-01BCG-C-A
AW20-01BCG-CN-A
AW20-01BCG-N-A
AW20-01BCG-R-A
AW20-01BCM-1-A
AW20-01BCM-2-A

Minimum order quantity	Days to Ship	Connection Dia.	Case Material	Case Guard	Exhaust Structure	Flow Direction	Drain Cock	Pressure Gauge	Size of Body	Set Pressure	Drain Outlet	Pressure Unit	Made to order specifications	Accessories	Type
1 Piece(s)	31 Day(s)	Rc1/8	[Plastic] Polycarbonate Case	No	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Manual] Manual	No (No Pressure Port Plug)	20	0.02 to 0.2 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa	None	None	-
1 Piece(s)	31 Day(s)	Rc1/8	[Plastic] Polycarbonate Case	Presence	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Manual] Manual	No (No Pressure Port Plug)	20	0.02 to 0.2 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa	None	None	-
1 Piece(s)	31 Day(s)	Rc1/8	[Plastic] Polycarbonate Case	No	Non-relief type	[Standard Flow (Left to Right)] Flow Direction	[Manual] Manual	No (No Pressure Port Plug)	20	0.02 to 0.2 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa	None	None	-
1 Piece(s)	21 Day(s)	Rc1/8	[Plastic] Polycarbonate Case	No	Non-relief type	[Reverse Flow (Right to Left)] Flow Direction	[Manual] Manual	No (No Pressure Port Plug)	20	0.02 to 0.2 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa	None	None	-
1 Piece(s)	31 Day(s)	Rc1/8	[Metal] Metal Case	No	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Manual] Manual	No (No Pressure Port Plug)	20	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa	None	None	-
1 Piece(s)	31 Day(s)	Rc1/8	[Metal] Metal Case	No	Non-relief type	[Standard Flow (Left to Right)] Flow Direction	[Manual] Manual	No (No Pressure Port Plug)	20	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa	None	None	-
1 Piece(s)	31 Day(s)	Rc1/8	[Plastic] Nylon Case	Presence	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Manual] Manual	No (No Pressure Port Plug)	20	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa	None	None	-
1 Piece(s)	Quote	Rc1/8	[Plastic] Nylon Case	No	Relief type	[Reverse Flow (Right to Left)] Flow Direction	[Manual] Manual	No (No Pressure Port Plug)	20	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa	None	None	-
1 Piece(s)	31 Day(s)	Rc1/8	[Metal] Metal Case	No	Non-relief type	[Reverse Flow (Right to Left)] Flow Direction	[Manual] Manual	No (No Pressure Port Plug)	20	0.02 to 0.2 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa	None	None	-
1 Piece(s)	Quote	Rc1/8	[Metal] Metal Case	No	Relief type	[Reverse Flow (Right to Left)] Flow Direction	[Manual] Manual	No (No Pressure Port Plug)	20	0.02 to 0.2 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa	None	None	-
1 Piece(s)	Same day	Rc1/8	[Plastic] Polycarbonate Case	No	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Manual] Manual	No (No Pressure Port Plug)	20	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa	None	None	-
1 Piece(s)	Quote	Rc1/8	[Plastic] Polycarbonate Case	No	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Manual] Manual	No (No Pressure Port Plug)	20	0.05 to 0.85 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa	0.85‑MPa setting	None	-
1 Piece(s)	31 Day(s)	Rc1/8	[Plastic] Polycarbonate Case	Presence	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Manual] Manual	No (No Pressure Port Plug)	20	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa	None	None	-
1 Piece(s)	Quote	Rc1/8	[Plastic] Polycarbonate Case	No	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Not Provided] No (Drain Guide)	No (No Pressure Port Plug)	20	0.05 to 0.7 MPa	Drain guide 1/8	Unit used on nameplate and pressure gauge: MPa	None	None	-
1 Piece(s)	31 Day(s)	Rc1/8	[Plastic] Polycarbonate Case	No	Non-relief type	[Standard Flow (Left to Right)] Flow Direction	[Manual] Manual	No (No Pressure Port Plug)	20	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa	None	None	-
1 Piece(s)	31 Day(s)	Rc1/8	[Plastic] Polycarbonate Case	No	Relief type	[Reverse Flow (Right to Left)] Flow Direction	[Manual] Manual	No (No Pressure Port Plug)	20	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa	None	None	-
1 Piece(s)	31 Day(s)	Rc1/8	[Plastic] Polycarbonate Case	No	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Manual] Manual	No (No Pressure Port Plug)	20	0.02 to 0.2 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa	None	With Bracket	-
1 Piece(s)	Quote	Rc1/8	[Plastic] Polycarbonate Case	Presence	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Manual] Manual	No (No Pressure Port Plug)	20	0.02 to 0.2 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa	None	With Bracket	-
1 Piece(s)	21 Day(s)	Rc1/8	[Plastic] Polycarbonate Case	No	Non-relief type	[Standard Flow (Left to Right)] Flow Direction	[Manual] Manual	No (No Pressure Port Plug)	20	0.02 to 0.2 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa	None	With Bracket	-
1 Piece(s)	21 Day(s)	Rc1/8	[Plastic] Polycarbonate Case	No	Relief type	[Reverse Flow (Right to Left)] Flow Direction	[Manual] Manual	No (No Pressure Port Plug)	20	0.02 to 0.2 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa	None	With Bracket	-
1 Piece(s)	31 Day(s)	Rc1/8	[Metal] Metal Case	No	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Manual] Manual	No (No Pressure Port Plug)	20	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa	None	With Bracket	-
1 Piece(s)	31 Day(s)	Rc1/8	[Metal] Metal Case	No	Non-relief type	[Standard Flow (Left to Right)] Flow Direction	[Manual] Manual	No (No Pressure Port Plug)	20	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa	None	With Bracket	-
1 Piece(s)	31 Day(s)	Rc1/8	[Metal] Metal Case	No	Relief type	[Reverse Flow (Right to Left)] Flow Direction	[Manual] Manual	No (No Pressure Port Plug)	20	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa	None	With Bracket	-
1 Piece(s)	Quote	Rc1/8	[Plastic] Nylon Case	No	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Manual] Manual	No (No Pressure Port Plug)	20	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa	None	With Bracket	-
1 Piece(s)	31 Day(s)	Rc1/8	[Plastic] Nylon Case	Presence	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Manual] Manual	No (No Pressure Port Plug)	20	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa	None	With Bracket	-
1 Piece(s)	Quote	Rc1/8	[Plastic] Nylon Case	Presence	Relief type	[Reverse Flow (Right to Left)] Flow Direction	[Manual] Manual	No (No Pressure Port Plug)	20	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa	None	With Bracket	-
1 Piece(s)	31 Day(s)	Rc1/8	[Plastic] Polycarbonate Case	No	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Manual] Manual	No (No Pressure Port Plug)	20	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa	None	With Bracket	-
1 Piece(s)	31 Day(s)	Rc1/8	[Plastic] Polycarbonate Case	Presence	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Manual] Manual	No (No Pressure Port Plug)	20	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa	None	With Bracket	-
1 Piece(s)	Quote	Rc1/8	[Plastic] Polycarbonate Case	Presence	Relief type	[Reverse Flow (Right to Left)] Flow Direction	[Manual] Manual	No (No Pressure Port Plug)	20	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa	None	With Bracket	-
1 Piece(s)	Quote	Rc1/8	[Plastic] Polycarbonate Case	No	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Not Provided] No (Drain Guide)	No (No Pressure Port Plug)	20	0.05 to 0.7 MPa	Drain guide 1/8	Unit used on nameplate and pressure gauge: MPa	None	With Bracket	-
1 Piece(s)	31 Day(s)	Rc1/8	[Plastic] Polycarbonate Case	No	Relief type	[Reverse Flow (Right to Left)] Flow Direction	[Not Provided] No (Drain Guide)	No (No Pressure Port Plug)	20	0.05 to 0.7 MPa	Drain guide 1/8	Unit used on nameplate and pressure gauge: MPa	None	With Bracket	-
1 Piece(s)	31 Day(s)	Rc1/8	[Plastic] Polycarbonate Case	No	Non-relief type	[Standard Flow (Left to Right)] Flow Direction	[Manual] Manual	No (No Pressure Port Plug)	20	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa	None	With Bracket	-
1 Piece(s)	31 Day(s)	Rc1/8	[Plastic] Polycarbonate Case	No	Relief type	[Reverse Flow (Right to Left)] Flow Direction	[Manual] Manual	No (No Pressure Port Plug)	20	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa	None	With Bracket	-
1 Piece(s)	Quote	Rc1/8	[Plastic] Polycarbonate Case	No	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	No (No Pressure Port Plug)	20	0.02 to 0.2 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa	None	With Bracket	-
1 Piece(s)	31 Day(s)	Rc1/8	[Metal] Metal Case	No	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	No (No Pressure Port Plug)	20	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa	None	With Bracket	-
1 Piece(s)	31 Day(s)	Rc1/8	[Metal] Metal Case	No	Non-relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	No (No Pressure Port Plug)	20	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa	None	With Bracket	-
1 Piece(s)	Quote	Rc1/8	[Plastic] Nylon Case	No	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	No (No Pressure Port Plug)	20	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa	None	With Bracket	-
1 Piece(s)	Quote	Rc1/8	[Metal] Metal Case	No	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	No (No Pressure Port Plug)	20	0.02 to 0.2 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa	None	With Bracket	-
1 Piece(s)	31 Day(s)	Rc1/8	[Plastic] Polycarbonate Case	No	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	No (No Pressure Port Plug)	20	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa	None	With Bracket	-
1 Piece(s)	31 Day(s)	Rc1/8	[Plastic] Polycarbonate Case	Presence	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	No (No Pressure Port Plug)	20	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa	None	With Bracket	-
1 Piece(s)	Quote	Rc1/8	[Plastic] Polycarbonate Case	Presence	Relief type	[Reverse Flow (Right to Left)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	No (No Pressure Port Plug)	20	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa	None	With Bracket	-
1 Piece(s)	21 Day(s)	Rc1/8	[Plastic] Polycarbonate Case	No	Non-relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	No (No Pressure Port Plug)	20	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa	None	With Bracket	-
1 Piece(s)	31 Day(s)	Rc1/8	[Plastic] Polycarbonate Case	No	Relief type	[Reverse Flow (Right to Left)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	No (No Pressure Port Plug)	20	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa	None	With Bracket	-
1 Piece(s)	31 Day(s)	Rc1/8	[Plastic] Polycarbonate Case	No	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	[With Standard Pressure Gauge] Round-shaped pressure gauge (with limit indicator)	20	0.02 to 0.2 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa	None	With Bracket	-
1 Piece(s)	31 Day(s)	Rc1/8	[Plastic] Polycarbonate Case	Presence	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	[With Standard Pressure Gauge] Round-shaped pressure gauge (with limit indicator)	20	0.02 to 0.2 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa	None	With Bracket	-
1 Piece(s)	Quote	Rc1/8	[Plastic] Polycarbonate Case	Presence	Non-relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	[With Standard Pressure Gauge] Round-shaped pressure gauge (with limit indicator)	20	0.02 to 0.2 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa	None	With Bracket	-
1 Piece(s)	31 Day(s)	Rc1/8	[Plastic] Polycarbonate Case	No	Non-relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	[With Standard Pressure Gauge] Round-shaped pressure gauge (with limit indicator)	20	0.02 to 0.2 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa	None	With Bracket	-
1 Piece(s)	31 Day(s)	Rc1/8	[Metal] Metal Case	No	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	[With Standard Pressure Gauge] Round-shaped pressure gauge (with limit indicator)	20	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa	None	With Bracket	-
1 Piece(s)	31 Day(s)	Rc1/8	[Metal] Metal Case	No	Non-relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	[With Standard Pressure Gauge] Round-shaped pressure gauge (with limit indicator)	20	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa	None	With Bracket	-
1 Piece(s)	31 Day(s)	Rc1/8	[Metal] Metal Case	No	Relief type	[Reverse Flow (Right to Left)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	[With Standard Pressure Gauge] Round-shaped pressure gauge (with limit indicator)	20	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa	None	With Bracket	-
1 Piece(s)	31 Day(s)	Rc1/8	[Plastic] Nylon Case	No	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	[With Standard Pressure Gauge] Round-shaped pressure gauge (with limit indicator)	20	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa	None	With Bracket	-
1 Piece(s)	31 Day(s)	Rc1/8	[Metal] Metal Case	No	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	[With Standard Pressure Gauge] Round-shaped pressure gauge (with limit indicator)	20	0.02 to 0.2 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa	None	With Bracket	-
1 Piece(s)	Quote	Rc1/8	[Plastic] Nylon Case	Presence	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	[With Standard Pressure Gauge] Round-shaped pressure gauge (with limit indicator)	20	0.02 to 0.2 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa	None	With Bracket	-
1 Piece(s)	Same day	Rc1/8	[Plastic] Polycarbonate Case	No	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	[With Standard Pressure Gauge] Round-shaped pressure gauge (with limit indicator)	20	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa	None	With Bracket	-
1 Piece(s)	31 Day(s)	Rc1/8	[Plastic] Polycarbonate Case	Presence	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	[With Standard Pressure Gauge] Round-shaped pressure gauge (with limit indicator)	20	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa	None	With Bracket	-
1 Piece(s)	Quote	Rc1/8	[Plastic] Polycarbonate Case	Presence	Non-relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	[With Standard Pressure Gauge] Round-shaped pressure gauge (with limit indicator)	20	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa	None	With Bracket	-
1 Piece(s)	31 Day(s)	Rc1/8	[Plastic] Polycarbonate Case	No	Non-relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	[With Standard Pressure Gauge] Round-shaped pressure gauge (with limit indicator)	20	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa	None	With Bracket	-
1 Piece(s)	31 Day(s)	Rc1/8	[Plastic] Polycarbonate Case	No	Relief type	[Reverse Flow (Right to Left)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	[With Standard Pressure Gauge] Round-shaped pressure gauge (with limit indicator)	20	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa	None	With Bracket	-
1 Piece(s)	Quote	Rc1/8	[Plastic] Polycarbonate Case	No	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	[With Standard Pressure Gauge] Round-shaped pressure gauge (with color zone)	20	0.02 to 0.2 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa	None	With Bracket	-
1 Piece(s)	31 Day(s)	Rc1/8	[Metal] Metal Case	No	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	[With Standard Pressure Gauge] Round-shaped pressure gauge (with color zone)	20	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa	None	With Bracket	-

Basic Information

Regulator Unit Combination	Filter Regulator	Filter, Filtration Level	5μm	Compressed Air Quality	General Dry Air
Max. Operating Pressure(MPa)	1

Configure

157 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Case Material
- Plastic
  - Nylon Case
  - Polycarbonate Case
- Metal
  - Metal Case
  - Metal Case with Level Gauge
Clear
Case Guard
- No
- Presence
Clear
Exhaust Structure
- Non-relief type
- Relief type
Clear
Flow Direction
- Standard Flow (Left to Right)
  - Flow Direction
- Reverse Flow (Right to Left)
  - Flow Direction
Clear
Drain Cock
- Manual
  - Manual
  - Manual (with valve)
- Auto/Manual
  - N.C. (Normally Closed) at non-pressurized without drain emissions
  - N.O. (Normally Open) at non-pressurized with drain emissions
- Not Provided
  - No (Drain Guide)
Clear
Pressure Gauge
- None (Pressure Port Plug available)
  - No Pressure Gauge
- No (No Pressure Port Plug)
- With Standard Pressure Gauge
  - Round-shaped pressure gauge (with color zone)
  - Round-shaped pressure gauge (with limit indicator)
  - Round-shaped pressure gauge (without limit indicator)
Clear
Size of Body
10

20

30

40
Clear
Set Pressure
- 0.02 to 0.2 MPa
- 0.05 to 0.4 MPa
- 0.05 to 0.7 MPa
- 0.05 to 0.85 MPa
Clear
Drain Outlet
- Drain guide 1/4
- Drain guide 1/8
- With drain cock, barb fitting (for ø6 × ø4 nylon tube)
- With drain cock
Clear
Pressure Unit
- Name plate, bowl caution plate and pressure gauge units: psi, °F
- Name plate, bowl caution plate and pressure gauge units: psi, ºF
- Unit notation of name plate and pressure gauge: MPa
- Unit used on nameplate and pressure gauge: MPa
Clear
Made to order specifications
- 0.4‑MPa setting
- 0.85 MPa setting
- 0.85‑MPa setting
- Long bowl compatible
- Long bowl setting
- NPN output with digital pressure switch
- None
- PNP output with digital pressure switch
Clear
Accessories
- None
- With Bracket
- With set nut (for panel mount)
Clear
Type
- Copper and Fluorine Unavailable Specifications
- Standard
Clear
type
- 20-AW20-A
- 20-AW30-A
- 20-AW40-A
- AW10
- AW10-A
- AW20
- AW20-A
- AW30
- AW30-A
- AW40
- AW40-A
Clear
Connection Dia.
- Rc1/8
- Rc1/4
- Rc3/8
- Rc1/2
- Rc3/4
- NPT1/4
- NPT3/8
- G1/4
- G3/8
- NPT1/2
- NPT3/4
- NPT1/8
- G1/8
- G1/2
- G3/4
- M5
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

Same day

15 Day(s) or Less

20 Day(s) or Less

21 Day(s) or Less

31 Day(s) or Less

40 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：021-8990-4102 / FAX：021-8990-5803; 8:30am - 5:30pm (Monday - Friday); Technical Inquiry

Top of the page

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

Credit Card Kartu Kredit
Bank TransferTransfer Bank

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Tel:021-8984-0008
Fax:021-8984-0007

Inquiry Permintaan

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

Filter Regulator AW10-A To AW40-A

(i)Caution

Basic Information

Configure

Specification/Dimensions

Case Material

Case Guard

Exhaust Structure

Flow Direction

Drain Cock

Pressure Gauge

Size of Body

Set Pressure

Drain Outlet

Pressure Unit

Made to order specifications

Accessories

Type

type

Connection Dia.

CAD

Days to Ship

Specify Alterations

Tech Support

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

Filter Regulator AW10-A To AW40-A

(i)Caution

Basic Information

Configure

Specification/Dimensions

Case Material

Case Guard

Exhaust Structure

Flow Direction

Drain Cock

Pressure Gauge

Size of Body

Set Pressure

Drain Outlet

Pressure Unit

Made to order specifications

Accessories

Type

type

Connection Dia.

CAD

Days to Ship

Specify Alterations

Tech Support

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) *Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) *Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan
Kategori / Merek

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB