(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
9.5 Million Products, 1,600 Brands, Free Shipping,
63,000 Stock items for Same Day Shipping
63,000 Stock items for Same Day Shipping
9.5 Juta Produk, 1,600 Merek, Gratis Pengiriman,
63,000 Item Stok untuk Pengiriman di Hari yang Sama
63,000 Item Stok untuk Pengiriman di Hari yang Sama
021-8984-0008
021-8984-0008
8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)
8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
Order/Quote
?
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here - Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998
Rotary actuator, DFPD Series
[Specifications]
The DFPD series features a rack and pinion combination with a constant torque characteristic across the entire swivel range. The quarter turn actuators DFPD are perfect for automating your butterfly valves, ball valves and air shut off valves.
• Uniform torque characteristic across the entire rotation angle of 90° with the double-acting version
• Version with swivel angle 120°, 135°, 180° for the sizes 40, 120, 240, 480, double-acting
• Process valve connector according to ISO 5211
• Mounting hole pattern to VDI/VDE 3845
• Sturdy, non-slip, and easy-to-clean aluminum housing
• Long service life, low wear
• Increased corrosion protection
Rotary actuator, DFPD Series
Features
Specifications
| Size | 10 | 20 | 40 | 80 | 120 | 160 | ||||
|---|---|---|---|---|---|---|---|---|---|---|
| Mode of operation | Double-acting | |||||||||
| Design | Gear rack/pinion | |||||||||
| Cushioning | No cushioning | |||||||||
| Mounting position | Any | |||||||||
| Pneumatic connection | G1/8 | G1/4 | ||||||||
| 1/8 NPT | 1/4 NPT | |||||||||
| Process valve connection to standard | ISO 5211 | |||||||||
| Valve connection conforms to standard | VDI/VDE 3845 (NAMUR) | |||||||||
| Connection for positioner and position sensor conforms to standard | VDI/VDE 3845 (NAMUR) | |||||||||
| Safety Integrity Level (SIL) | Up to SIL 2 high demand mode | |||||||||
| Size | AA 1 | |||||||||
| Flange hole pattern 1 | F03 | F04 | F03 | F04 | F05 | F04 | F05 | F05 | F05 | F07 |
| Flange hole pattern 2 | - | - | - | - | - | F07 | F07 | F07 | F07 | F10 |
| Swivel angle [°] | 90 | |||||||||
| - | 120 | - | 120 | - | ||||||
| - | 135 | - | 135 | - | ||||||
| - | 180 | - | 180 | - | ||||||
| End-position adjusting range [°] at 0° | -5 to +5 | |||||||||
| End-position adjusting range [°] at 90° | -5 to +5 | |||||||||
| End-position adjusting range at 180° | - | -5 to +5 | - | -5 to +5 | - | |||||
| Position sensing | Optical | |||||||||
| Closing direction | Closes to the right | |||||||||
| Part Number | Minimum order quantity | Volume Discount | Days to Ship | Housing material | Shaft material | Swivel angle (deg) | Nominal operating pressure (bar) | Pneumatic connection | Size of valve actuator | Depth shaft connection (mm) | Torque at nominal operating pressure and 0° swivel angle (Nm) | Torque at nominal operating pressure and 90° swivel angle (Nm) | Operating medium | Corrosion resistance class (CRC) | Flange hole pattern | End-position adjusting range at 0° (deg) | End-position adjusting range at nominal swivel angle (deg) | Standard connection for valve | Mounting position | Mode of operation | Structural design | Closing direction | Valve connection conforms to standard | Connection point for positioner and position sensor conforms to standard | Devices type according to VDMA 66413 | Safety function | Safety integrity level (SIL) | Certified for safety function to ISO 13849 and IEC 61508 (SIL) | Maritime classification | CE marking (see declaration of conformity) | UKCA marking (see declaration of conformity) | Explosion protection certification outside the EU | Explosion prevention and protection | Certificate issuing authority | ATEX category gas | ATEX category for dust | Type of ignition protection for gas | Type of (ignition) protection for dust | Explosive ambient temperature (°C) | Information on operating and pilot media | LABS (PWIS) conformity | MTTFd (years) | PFH | PFD | Air consumption at 6 bar per cycle 0°-nominal swivel angle-0° (l) | Shaft connection | Note on materials | Material of sub-base | Material of piston | Material of bearing | Cam material | Spring return torque at 0° swivel angle (Nm) | Spring return torque with 90° swivel angle (Nm) | Material of spring | Manufacturer part # | Weight (g) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 Piece(s) | 4 Day(s) | Wrought aluminum alloy, Anodized | Steel, nickel-plated | 90 | 5.5 | G1/8 | 10 | 10 | 10.3 | 10.3 | Compressed air as per ISO 8573-1:2010 [7:4:4] | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 965 | ||
| 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy, anodized | High-alloy stainless steel | 90 | 5.5 | G1/8 | 10 | 10 | 10.3 | 10.3 | - | 1 - Low corrosion stress | F03 | -5 ... 5 | -5 ... 5 | ISO 5211 | Any | Double-acting | Gear rack/pinion | Clockwise closing | VDI/VDE 3845 (NAMUR) | VDI/VDE 3845 size AA 1 | Safety device | nan | Up to SIL 2 low demand mode up to SIL 3 in a redundant architecture up to SIL 1 high demand mode | Product can be used in safety-related parts of control systems up to SIL 2, low demand Product can be used in safety-related parts of control systems up to SIL 1, high demand up to SIL 3 in a redundant architecture | See certificate | as per EU explosion protection directive (ATEX) | acc. to UK EX instructions | EPL Db (GB) EPL Gb (GB) | Zone 1 (ATEX) Zone 1 (UKEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 21 (UKEX) Zone 22 (ATEX) | DNV TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.01/2023 | II 2G | II 2D | Ex h IIC T4 Gb X | Ex h IIIC T105°C Db X | -20 <= Ta <= +80 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Dew point min. 10 °C below the ambient temperature and temperature of medium Operation with oil lubrication possible (required for further use) | VDMA24364-B1/B2-L | 1126 | 1.01e-07 | 0.00142 | 1 | T9 | RoHS-compliant | Wrought aluminum alloy, anodized | Die-cast aluminum | POM | High-alloy stainless steel | - | - | - | 965 | ||
| 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy, anodized | High-alloy stainless steel | 90 | 5.5 | G1/8 | 10 | 10 | 10.3 | 10.3 | - | 1 - Low corrosion stress | F04 | -5 ... 5 | -5 ... 5 | ISO 5211 | Any | Double-acting | Gear rack/pinion | Clockwise closing | VDI/VDE 3845 (NAMUR) | VDI/VDE 3845 size AA 1 | Safety device | nan | Up to SIL 2 low demand mode up to SIL 3 in a redundant architecture up to SIL 1 high demand mode | Product can be used in safety-related parts of control systems up to SIL 2, low demand Product can be used in safety-related parts of control systems up to SIL 1, high demand up to SIL 3 in a redundant architecture | See certificate | as per EU explosion protection directive (ATEX) | acc. to UK EX instructions | EPL Db (GB) EPL Gb (GB) | Zone 1 (ATEX) Zone 1 (UKEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 21 (UKEX) Zone 22 (ATEX) | DNV TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.01/2023 | II 2G | II 2D | Ex h IIC T4 Gb X | Ex h IIIC T105°C Db X | -20 <= Ta <= +80 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Dew point min. 10 °C below the ambient temperature and temperature of medium Operation with oil lubrication possible (required for further use) | VDMA24364-B1/B2-L | 1126 | 1.01e-07 | 0.00142 | 1 | T9 | RoHS-compliant | Wrought aluminum alloy, anodized | Die-cast aluminum | POM | High-alloy stainless steel | - | - | - | 965 | ||
| 1 Piece(s) | 4 Day(s) | Wrought aluminum alloy, Anodized | Steel, nickel-plated | 90 | 5.5 | G1/8 | 20 | 12 | 20.1 | 20.1 | Compressed air as per ISO 8573-1:2010 [7:4:4] | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1275 | ||
| 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy, anodized | High-alloy stainless steel | 90 | 5.5 | G1/8 | 20 | 12 | 20.1 | 20.1 | - | 1 - Low corrosion stress | F04 | -5 ... 5 | -5 ... 5 | ISO 5211 | Any | Double-acting | Gear rack/pinion | Clockwise closing | VDI/VDE 3845 (NAMUR) | VDI/VDE 3845 size AA 1 | Safety device | nan | Up to SIL 2 low demand mode up to SIL 3 in a redundant architecture up to SIL 1 high demand mode | Product can be used in safety-related parts of control systems up to SIL 2, low demand Product can be used in safety-related parts of control systems up to SIL 1, high demand up to SIL 3 in a redundant architecture | See certificate | as per EU explosion protection directive (ATEX) | acc. to UK EX instructions | EPL Db (GB) EPL Gb (GB) | Zone 1 (ATEX) Zone 1 (UKEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 21 (UKEX) Zone 22 (ATEX) | DNV TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.01/2023 | II 2G | II 2D | Ex h IIC T4 Gb X | Ex h IIIC T105°C Db X | -20 <= Ta <= +80 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Dew point min. 10 °C below the ambient temperature and temperature of medium Operation with oil lubrication possible (required for further use) | VDMA24364-B1/B2-L | 1126 | 1.01e-07 | 0.00142 | 1.8 | T11 | RoHS-compliant | Wrought aluminum alloy, anodized | Die-cast aluminum | POM | High-alloy stainless steel | - | - | - | 1275 | ||
| 1 Piece(s) | 15 Day(s) | Wrought aluminum alloy, anodized | Steel, nickel-plated | 90 | 5.5 | G1/8 | 20 | 12 | 20.1 | 20.1 | Compressed air as per ISO 8573-1:2010 [7:4:4] | 2 - Moderate corrosion stress | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1275 | ||
| 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy, anodized | High-alloy stainless steel | 90 | 5.5 | G1/8 | 20 | 12 | 20.1 | 20.1 | - | 1 - Low corrosion stress | F05 | -5 ... 5 | -5 ... 5 | ISO 5211 | Any | Double-acting | Gear rack/pinion | Clockwise closing | VDI/VDE 3845 (NAMUR) | VDI/VDE 3845 size AA 1 | Safety device | nan | Up to SIL 2 low demand mode up to SIL 3 in a redundant architecture up to SIL 1 high demand mode | Product can be used in safety-related parts of control systems up to SIL 2, low demand Product can be used in safety-related parts of control systems up to SIL 1, high demand up to SIL 3 in a redundant architecture | See certificate | as per EU explosion protection directive (ATEX) | acc. to UK EX instructions | EPL Db (GB) EPL Gb (GB) | Zone 1 (ATEX) Zone 1 (UKEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 21 (UKEX) Zone 22 (ATEX) | DNV TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.01/2023 | II 2G | II 2D | Ex h IIC T4 Gb X | Ex h IIIC T105°C Db X | -20 <= Ta <= +80 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Dew point min. 10 °C below the ambient temperature and temperature of medium Operation with oil lubrication possible (required for further use) | VDMA24364-B1/B2-L | 1126 | 1.01e-07 | 0.00142 | 1.8 | T11 | RoHS-compliant | Wrought aluminum alloy, anodized | Die-cast aluminum | POM | High-alloy stainless steel | - | - | - | 1275 | ||
| 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy, anodized | High-alloy stainless steel | 90 | 3 | G1/8 | 20 | 10 | 7.4 | 3.8 | - | 1 - Low corrosion stress | F03 | -5 ... 5 | -5 ... 5 | ISO 5211 | Any | Single-acting | Gear rack/pinion | Clockwise closing | VDI/VDE 3845 (NAMUR) | VDI/VDE 3845 size AA 1 | Safety device | The safety function consists of the drive switching to the defined safety switching position when the compressed air is switched off and the spring chamber is exhausted. This switching movement is achieved by the spring force of the spring assembly. | Up to SIL 2 low demand mode up to SIL 3 in a redundant architecture up to SIL 1 high demand mode | Product can be used in safety-related parts of control systems up to SIL 2, low demand Product can be used in safety-related parts of control systems up to SIL 1, high demand up to SIL 3 in a redundant architecture | See certificate | as per EU explosion protection directive (ATEX) | acc. to UK EX instructions | EPL Db (GB) EPL Gb (GB) | Zone 1 (ATEX) Zone 1 (UKEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 21 (UKEX) Zone 22 (ATEX) | DNV TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.01/2023 | II 2G | II 2D | Ex h IIC T4 Gb X | Ex h IIIC T105°C Db X | -20 <= Ta <= +80 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Dew point min. 10 °C below the ambient temperature and temperature of medium Operation with oil lubrication possible (required for further use) | VDMA24364-B1/B2-L | 1126 | 1.01e-07 | 0.00078 | 0.8 | T9 | RoHS-compliant | Wrought aluminum alloy, anodized | Die-cast aluminum | POM | High-alloy stainless steel | 3.6 | 7.1 | Spring steel | 1371 | ||
| 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy, Anodized | Steel, nickel-plated | 90 | 3 | G1/8 | 20 | 12 | 7.4 | 3.8 | Compressed air as per ISO 8573-1:2010 [7:4:4] | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1371 | ||
| 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy, anodized | Steel, nickel-plated | 90 | 3 | G1/8 | 20 | 12 | 7.4 | 3.8 | - | 1 - Low corrosion stress | F05 | -5 ... 5 | -5 ... 5 | ISO 5211 | Any | Single-acting | Gear rack/pinion | Clockwise closing | VDI/VDE 3845 (NAMUR) | VDI/VDE 3845 size AA 1 | Safety device | The safety function consists of the drive switching to the defined safety switching position when the compressed air is switched off and the spring chamber is exhausted. This switching movement is achieved by the spring force of the spring assembly. | Up to SIL 2 low demand mode up to SIL 3 in a redundant architecture up to SIL 1 high demand mode | Product can be used in safety-related parts of control systems up to SIL 2, low demand Product can be used in safety-related parts of control systems up to SIL 1, high demand up to SIL 3 in a redundant architecture | See certificate | as per EU explosion protection directive (ATEX) | acc. to UK EX instructions | EPL Db (GB) EPL Gb (GB) | Zone 1 (ATEX) Zone 1 (UKEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 21 (UKEX) Zone 22 (ATEX) | DNV TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.01/2023 | II 2G | II 2D | Ex h IIC T4 Gb X | Ex h IIIC T105°C Db X | -20 <= Ta <= +80 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Dew point min. 10 °C below the ambient temperature and temperature of medium Operation with oil lubrication possible (required for further use) | VDMA24364-B1/B2-L | 1126 | 1.01e-07 | 0.00078 | 0.8 | T11 | RoHS-compliant | Wrought aluminum alloy, anodized | Die-cast aluminum | POM | High-alloy stainless steel | 3.6 | 7.1 | Spring steel | 1371 | ||
| 1 Piece(s) | 25 Day(s) | Wrought aluminum alloy, anodized | Steel, nickel-plated | 90 | 6 | G1/8 | 20 | 10 | 14.7 | 7.6 | Compressed air as per ISO 8573-1:2010 [7:4:4] | 2 - Moderate corrosion stress | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1419 | ||
| 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy, anodized | High-alloy stainless steel | 90 | 6 | G1/8 | 20 | 10 | 14.7 | 7.6 | - | 1 - Low corrosion stress | F03 | -5 ... 5 | -5 ... 5 | ISO 5211 | Any | Single-acting | Gear rack/pinion | Clockwise closing | VDI/VDE 3845 (NAMUR) | VDI/VDE 3845 size AA 1 | Safety device | The safety function consists of the drive switching to the defined safety switching position when the compressed air is switched off and the spring chamber is exhausted. This switching movement is achieved by the spring force of the spring assembly. | Up to SIL 2 low demand mode up to SIL 3 in a redundant architecture up to SIL 1 high demand mode | Product can be used in safety-related parts of control systems up to SIL 2, low demand Product can be used in safety-related parts of control systems up to SIL 1, high demand up to SIL 3 in a redundant architecture | See certificate | as per EU explosion protection directive (ATEX) | acc. to UK EX instructions | EPL Db (GB) EPL Gb (GB) | Zone 1 (ATEX) Zone 1 (UKEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 21 (UKEX) Zone 22 (ATEX) | DNV TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.01/2023 | II 2G | II 2D | Ex h IIC T4 Gb X | Ex h IIIC T105°C Db X | -20 <= Ta <= +80 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Dew point min. 10 °C below the ambient temperature and temperature of medium Operation with oil lubrication possible (required for further use) | VDMA24364-B1/B2-L | 1126 | 1.01e-07 | 0.00078 | 0.8 | T9 | RoHS-compliant | Wrought aluminum alloy, anodized | Die-cast aluminum | POM | High-alloy stainless steel | 7.2 | 14.3 | Spring steel | 1419 | ||
| 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy, anodized | Steel, nickel-plated | 90 | 6 | G1/8 | 20 | 12 | 14.7 | 7.6 | - | 1 - Low corrosion stress | F04 | -5 ... 5 | -5 ... 5 | ISO 5211 | Any | Single-acting | Gear rack/pinion | Clockwise closing | VDI/VDE 3845 (NAMUR) | VDI/VDE 3845 size AA 1 | Safety device | The safety function consists of the drive switching to the defined safety switching position when the compressed air is switched off and the spring chamber is exhausted. This switching movement is achieved by the spring force of the spring assembly. | Up to SIL 2 low demand mode up to SIL 3 in a redundant architecture up to SIL 1 high demand mode | Product can be used in safety-related parts of control systems up to SIL 2, low demand Product can be used in safety-related parts of control systems up to SIL 1, high demand up to SIL 3 in a redundant architecture | See certificate | as per EU explosion protection directive (ATEX) | acc. to UK EX instructions | EPL Db (GB) EPL Gb (GB) | Zone 1 (ATEX) Zone 1 (UKEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 21 (UKEX) Zone 22 (ATEX) | DNV TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.01/2023 | II 2G | II 2D | Ex h IIC T4 Gb X | Ex h IIIC T105°C Db X | -20 <= Ta <= +80 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Dew point min. 10 °C below the ambient temperature and temperature of medium Operation with oil lubrication possible (required for further use) | VDMA24364-B1/B2-L | 1126 | 1.01e-07 | 0.00078 | 0.8 | T11 | RoHS-compliant | Wrought aluminum alloy, anodized | Die-cast aluminum | POM | High-alloy stainless steel | 7.2 | 14.3 | Spring steel | 1419 | ||
| 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy, anodized | High-alloy stainless steel | 90 | 6 | G1/8 | 20 | 12 | 14.7 | 7.6 | - | 1 - Low corrosion stress | F04 | -5 ... 5 | -5 ... 5 | ISO 5211 | Any | Single-acting | Gear rack/pinion | Clockwise closing | VDI/VDE 3845 (NAMUR) | VDI/VDE 3845 size AA 1 | Safety device | The safety function consists of the drive switching to the defined safety switching position when the compressed air is switched off and the spring chamber is exhausted. This switching movement is achieved by the spring force of the spring assembly. | Up to SIL 2 low demand mode up to SIL 3 in a redundant architecture up to SIL 1 high demand mode | Product can be used in safety-related parts of control systems up to SIL 2, low demand Product can be used in safety-related parts of control systems up to SIL 1, high demand up to SIL 3 in a redundant architecture | See certificate | as per EU explosion protection directive (ATEX) | acc. to UK EX instructions | EPL Db (GB) EPL Gb (GB) | Zone 1 (ATEX) Zone 1 (UKEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 21 (UKEX) Zone 22 (ATEX) | DNV TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.01/2023 | II 2G | II 2D | Ex h IIC T4 Gb X | Ex h IIIC T105°C Db X | -20 <= Ta <= +80 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Dew point min. 10 °C below the ambient temperature and temperature of medium Operation with oil lubrication possible (required for further use) | VDMA24364-B1/B2-L | 1126 | 1.01e-07 | 0.00078 | 0.8 | T11 | RoHS-compliant | Wrought aluminum alloy, anodized | Die-cast aluminum | POM | High-alloy stainless steel | 7.2 | 14.3 | Spring steel | 1419 | ||
| 1 Piece(s) | 25 Day(s) | Wrought aluminum alloy, anodized | Steel, nickel-plated | 90 | 6 | G1/8 | 20 | 12 | 14.7 | 7.6 | Compressed air as per ISO 8573-1:2010 [7:4:4] | 2 - Moderate corrosion stress | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1419 | ||
| 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy, anodized | High-alloy stainless steel | 90 | 6 | G1/8 | 20 | 12 | 14.7 | 7.6 | - | 1 - Low corrosion stress | F05 | -5 ... 5 | -5 ... 5 | ISO 5211 | Any | Single-acting | Gear rack/pinion | Clockwise closing | VDI/VDE 3845 (NAMUR) | VDI/VDE 3845 size AA 1 | Safety device | The safety function consists of the drive switching to the defined safety switching position when the compressed air is switched off and the spring chamber is exhausted. This switching movement is achieved by the spring force of the spring assembly. | Up to SIL 2 low demand mode up to SIL 3 in a redundant architecture up to SIL 1 high demand mode | Product can be used in safety-related parts of control systems up to SIL 2, low demand Product can be used in safety-related parts of control systems up to SIL 1, high demand up to SIL 3 in a redundant architecture | See certificate | as per EU explosion protection directive (ATEX) | acc. to UK EX instructions | EPL Db (GB) EPL Gb (GB) | Zone 1 (ATEX) Zone 1 (UKEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 21 (UKEX) Zone 22 (ATEX) | DNV TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.01/2023 | II 2G | II 2D | Ex h IIC T4 Gb X | Ex h IIIC T105°C Db X | -20 <= Ta <= +80 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Dew point min. 10 °C below the ambient temperature and temperature of medium Operation with oil lubrication possible (required for further use) | VDMA24364-B1/B2-L | 1126 | 1.01e-07 | 0.00078 | 0.8 | T11 | RoHS-compliant | Wrought aluminum alloy, anodized | Die-cast aluminum | POM | High-alloy stainless steel | 7.2 | 14.3 | Spring steel | 1423 | ||
| 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy, anodized | High-alloy stainless steel | 90 | 6 | G1/8 | 20 | 12 | 14.7 | 7.6 | - | 1 - Low corrosion stress | F05 | -5 ... 5 | -5 ... 5 | ISO 5211 | Any | Single-acting | Gear rack/pinion | Clockwise closing | VDI/VDE 3845 (NAMUR) | VDI/VDE 3845 size AA 1 | Safety device | The safety function consists of the drive switching to the defined safety switching position when the compressed air is switched off and the spring chamber is exhausted. This switching movement is achieved by the spring force of the spring assembly. | Up to SIL 2 low demand mode up to SIL 3 in a redundant architecture up to SIL 1 high demand mode | Product can be used in safety-related parts of control systems up to SIL 2, low demand Product can be used in safety-related parts of control systems up to SIL 1, high demand up to SIL 3 in a redundant architecture | See certificate | as per EU explosion protection directive (ATEX) | acc. to UK EX instructions | EPL Db (GB) EPL Gb (GB) | Zone 1 (ATEX) Zone 1 (UKEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 21 (UKEX) Zone 22 (ATEX) | DNV TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.01/2023 | II 2G | II 2D | Ex h IIC T4 Gb X | Ex h IIIC T105°C Db X | -20 <= Ta <= +80 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Dew point min. 10 °C below the ambient temperature and temperature of medium Operation with oil lubrication possible (required for further use) | VDMA24364-B1/B2-L | 1126 | 1.01e-07 | 0.00078 | 0.8 | T11 | RoHS-compliant | Wrought aluminum alloy, anodized | Die-cast aluminum | POM | High-alloy stainless steel | 7.2 | 14.3 | Spring steel | 1419 | ||
| 1 Piece(s) | 4 Day(s) | Wrought aluminum alloy, Anodized | Steel, nickel-plated | 90 | 5.5 | G1/8 | 40 | 16 | 38.3 | 38.3 | Compressed air as per ISO 8573-1:2010 [7:4:4] | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1882 | ||
| 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy, anodized | High-alloy stainless steel | 90 | 5.5 | G1/8 | 40 | 16 | 38.3 | 38.3 | - | 1 - Low corrosion stress | F0507 | -5 ... 5 | -5 ... 5 | ISO 5211 | Any | Double-acting | Gear rack/pinion | Clockwise closing | VDI/VDE 3845 (NAMUR) | VDI/VDE 3845 size AA 1 | Safety device | nan | Up to SIL 2 low demand mode up to SIL 3 in a redundant architecture up to SIL 1 high demand mode | Product can be used in safety-related parts of control systems up to SIL 2, low demand Product can be used in safety-related parts of control systems up to SIL 1, high demand up to SIL 3 in a redundant architecture | See certificate | as per EU explosion protection directive (ATEX) | acc. to UK EX instructions | EPL Db (GB) EPL Gb (GB) | Zone 1 (ATEX) Zone 1 (UKEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 21 (UKEX) Zone 22 (ATEX) | DNV TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.01/2023 | II 2G | II 2D | Ex h IIC T4 Gb X | Ex h IIIC T105°C Db X | -20 <= Ta <= +80 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Dew point min. 10 °C below the ambient temperature and temperature of medium Operation with oil lubrication possible (required for further use) | VDMA24364-B1/B2-L | 1126 | 1.01e-07 | 0.00142 | 3.4 | T14 | RoHS-compliant | Wrought aluminum alloy, anodized | Die-cast aluminum | POM | High-alloy stainless steel | - | - | - | 1882 | ||
| 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy, anodized | Steel, nickel-plated | 90 | 3 | G1/8 | 40 | 12 | 14 | 7.3 | - | 1 - Low corrosion stress | F04 | -5 ... 5 | -5 ... 5 | ISO 5211 | Any | Single-acting | Gear rack/pinion | Clockwise closing | VDI/VDE 3845 (NAMUR) | VDI/VDE 3845 size AA 1 | Safety device | The safety function consists of the drive switching to the defined safety switching position when the compressed air is switched off and the spring chamber is exhausted. This switching movement is achieved by the spring force of the spring assembly. | Up to SIL 2 low demand mode up to SIL 3 in a redundant architecture up to SIL 1 high demand mode | Product can be used in safety-related parts of control systems up to SIL 2, low demand Product can be used in safety-related parts of control systems up to SIL 1, high demand up to SIL 3 in a redundant architecture | See certificate | as per EU explosion protection directive (ATEX) | acc. to UK EX instructions | EPL Db (GB) EPL Gb (GB) | Zone 1 (ATEX) Zone 1 (UKEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 21 (UKEX) Zone 22 (ATEX) | DNV TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.01/2023 | II 2G | II 2D | Ex h IIC T4 Gb X | Ex h IIIC T105°C Db X | -20 <= Ta <= +80 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Dew point min. 10 °C below the ambient temperature and temperature of medium Operation with oil lubrication possible (required for further use) | VDMA24364-B1/B2-L | 1126 | 1.01e-07 | 0.00078 | 1.5 | T11 | RoHS-compliant | Wrought aluminum alloy, anodized | Die-cast aluminum | POM | High-alloy stainless steel | 6.9 | 13.6 | Spring steel | 2087 | ||
| 1 Piece(s) | 25 Day(s) | Wrought aluminum alloy, anodized | Steel, nickel-plated | 90 | 3 | G1/8 | 40 | 16 | 14 | 7.3 | Compressed air as per ISO 8573-1:2010 [7:4:4] | 2 - Moderate corrosion stress | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2087 | ||
| 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy, anodized | High-alloy stainless steel | 90 | 4.5 | G1/8 | 40 | 16 | 21 | 10.9 | - | 1 - Low corrosion stress | F05 | -5 ... 5 | -5 ... 5 | ISO 5211 | Any | Single-acting | Gear rack/pinion | Clockwise closing | VDI/VDE 3845 (NAMUR) | VDI/VDE 3845 size AA 1 | Safety device | The safety function consists of the drive switching to the defined safety switching position when the compressed air is switched off and the spring chamber is exhausted. This switching movement is achieved by the spring force of the spring assembly. | Up to SIL 2 low demand mode up to SIL 3 in a redundant architecture up to SIL 1 high demand mode | Product can be used in safety-related parts of control systems up to SIL 2, low demand Product can be used in safety-related parts of control systems up to SIL 1, high demand up to SIL 3 in a redundant architecture | See certificate | as per EU explosion protection directive (ATEX) | acc. to UK EX instructions | EPL Db (GB) EPL Gb (GB) | Zone 1 (ATEX) Zone 1 (UKEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 21 (UKEX) Zone 22 (ATEX) | DNV TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.01/2023 | II 2G | II 2D | Ex h IIC T4 Gb X | Ex h IIIC T105°C Db X | -20 <= Ta <= +80 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Dew point min. 10 °C below the ambient temperature and temperature of medium Operation with oil lubrication possible (required for further use) | VDMA24364-B1/B2-L | 1126 | 1.01e-07 | 0.00078 | 1.5 | T14 | RoHS-compliant | Wrought aluminum alloy, anodized | Die-cast aluminum | POM | High-alloy stainless steel | 10.4 | 20.4 | Spring steel | 2139 | ||
| 1 Piece(s) | 25 Day(s) | Wrought aluminum alloy, anodized | Steel, nickel-plated | 90 | 6 | G1/8 | 40 | 12 | 28 | 14.5 | Compressed air as per ISO 8573-1:2010 [7:4:4] | 2 - Moderate corrosion stress | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2180 | ||
| 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy, anodized | High-alloy stainless steel | 90 | 6 | G1/8 | 40 | 12 | 28 | 14.5 | - | 1 - Low corrosion stress | F04 | -5 ... 5 | -5 ... 5 | ISO 5211 | Any | Single-acting | Gear rack/pinion | Clockwise closing | VDI/VDE 3845 (NAMUR) | VDI/VDE 3845 size AA 1 | Safety device | The safety function consists of the drive switching to the defined safety switching position when the compressed air is switched off and the spring chamber is exhausted. This switching movement is achieved by the spring force of the spring assembly. | Up to SIL 2 low demand mode up to SIL 3 in a redundant architecture up to SIL 1 high demand mode | Product can be used in safety-related parts of control systems up to SIL 2, low demand Product can be used in safety-related parts of control systems up to SIL 1, high demand up to SIL 3 in a redundant architecture | See certificate | as per EU explosion protection directive (ATEX) | acc. to UK EX instructions | EPL Db (GB) EPL Gb (GB) | Zone 1 (ATEX) Zone 1 (UKEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 21 (UKEX) Zone 22 (ATEX) | DNV TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.01/2023 | II 2G | II 2D | Ex h IIC T4 Gb X | Ex h IIIC T105°C Db X | -20 <= Ta <= +80 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Dew point min. 10 °C below the ambient temperature and temperature of medium Operation with oil lubrication possible (required for further use) | VDMA24364-B1/B2-L | 1126 | 1.01e-07 | 0.00078 | 1.5 | T11 | RoHS-compliant | Wrought aluminum alloy, anodized | Die-cast aluminum | POM | High-alloy stainless steel | 13.8 | 27.2 | Spring steel | 2180 | ||
| 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy, anodized | High-alloy stainless steel | 90 | 6 | G1/8 | 40 | 16 | 28 | 14.5 | - | 1 - Low corrosion stress | F05 | -5 ... 5 | -5 ... 5 | ISO 5211 | Any | Single-acting | Gear rack/pinion | Clockwise closing | VDI/VDE 3845 (NAMUR) | VDI/VDE 3845 size AA 1 | Safety device | The safety function consists of the drive switching to the defined safety switching position when the compressed air is switched off and the spring chamber is exhausted. This switching movement is achieved by the spring force of the spring assembly. | Up to SIL 2 low demand mode up to SIL 3 in a redundant architecture up to SIL 1 high demand mode | Product can be used in safety-related parts of control systems up to SIL 2, low demand Product can be used in safety-related parts of control systems up to SIL 1, high demand up to SIL 3 in a redundant architecture | See certificate | as per EU explosion protection directive (ATEX) | acc. to UK EX instructions | EPL Db (GB) EPL Gb (GB) | Zone 1 (ATEX) Zone 1 (UKEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 21 (UKEX) Zone 22 (ATEX) | DNV TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.01/2023 | II 2G | II 2D | Ex h IIC T4 Gb X | Ex h IIIC T105°C Db X | -20 <= Ta <= +80 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Dew point min. 10 °C below the ambient temperature and temperature of medium Operation with oil lubrication possible (required for further use) | VDMA24364-B1/B2-L | 1126 | 1.01e-07 | 0.00078 | 1.5 | T14 | RoHS-compliant | Wrought aluminum alloy, anodized | Die-cast aluminum | POM | High-alloy stainless steel | 13.8 | 27.2 | Spring steel | 2185 | ||
| 1 Piece(s) | 25 Day(s) | Wrought aluminum alloy, anodized | Steel, nickel-plated | 90 | 6 | G1/8 | 40 | 16 | 28 | 14.5 | Compressed air as per ISO 8573-1:2010 [7:4:4] | 2 - Moderate corrosion stress | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2180 | ||
| 1 Piece(s) | 4 Day(s) | Wrought aluminum alloy, Anodized | Steel, nickel-plated | 90 | 5.5 | G1/8 | 80 | 19 | 82.4 | 82.4 | Compressed air as per ISO 8573-1:2010 [7:4:4] | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 3308 | ||
| 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy, anodized | High-alloy stainless steel | 90 | 5.5 | G1/8 | 80 | 19 | 82.4 | 82.4 | - | 1 - Low corrosion stress | F0507 | -5 ... 5 | -5 ... 5 | ISO 5211 | Any | Double-acting | Gear rack/pinion | Clockwise closing | VDI/VDE 3845 (NAMUR) | VDI/VDE 3845 size AA 1 | Safety device | nan | Up to SIL 2 low demand mode up to SIL 3 in a redundant architecture up to SIL 1 high demand mode | Product can be used in safety-related parts of control systems up to SIL 2, low demand Product can be used in safety-related parts of control systems up to SIL 1, high demand up to SIL 3 in a redundant architecture | See certificate | as per EU explosion protection directive (ATEX) | acc. to UK EX instructions | EPL Db (GB) EPL Gb (GB) | Zone 1 (ATEX) Zone 1 (UKEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 21 (UKEX) Zone 22 (ATEX) | DNV TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.01/2023 | II 2G | II 2D | Ex h IIC T4 Gb X | Ex h IIIC T105°C Db X | -20 <= Ta <= +80 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Dew point min. 10 °C below the ambient temperature and temperature of medium Operation with oil lubrication possible (required for further use) | VDMA24364-B1/B2-L | 1126 | 1.01e-07 | 0.00142 | 7.4 | T17 | RoHS-compliant | Wrought aluminum alloy, anodized | Die-cast aluminum | POM | High-alloy stainless steel | - | - | - | 3308 | ||
| 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy, anodized | Steel, nickel-plated | 90 | 3 | G1/8 | 80 | 19 | 30.1 | 15.7 | - | 1 - Low corrosion stress | F0507 | -5 ... 5 | -5 ... 5 | ISO 5211 | Any | Single-acting | Gear rack/pinion | Clockwise closing | VDI/VDE 3845 (NAMUR) | VDI/VDE 3845 size AA 1 | Safety device | The safety function consists of the drive switching to the defined safety switching position when the compressed air is switched off and the spring chamber is exhausted. This switching movement is achieved by the spring force of the spring assembly. | Up to SIL 2 low demand mode up to SIL 3 in a redundant architecture up to SIL 1 high demand mode | Product can be used in safety-related parts of control systems up to SIL 2, low demand Product can be used in safety-related parts of control systems up to SIL 1, high demand up to SIL 3 in a redundant architecture | See certificate | as per EU explosion protection directive (ATEX) | acc. to UK EX instructions | EPL Db (GB) EPL Gb (GB) | Zone 1 (ATEX) Zone 1 (UKEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 21 (UKEX) Zone 22 (ATEX) | DNV TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.01/2023 | II 2G | II 2D | Ex h IIC T4 Gb X | Ex h IIIC T105°C Db X | -20 <= Ta <= +80 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Dew point min. 10 °C below the ambient temperature and temperature of medium Operation with oil lubrication possible (required for further use) | VDMA24364-B1/B2-L | 1126 | 1.01e-07 | 0.00078 | 3.1 | T17 | RoHS-compliant | Wrought aluminum alloy, anodized | Die-cast aluminum | POM | High-alloy stainless steel | 14.8 | 29.2 | Spring steel | 3746 | ||
| 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy, anodized | High-alloy stainless steel | 90 | 3 | G1/8 | 80 | 19 | 30.1 | 15.7 | - | 1 - Low corrosion stress | F0507 | -5 ... 5 | -5 ... 5 | ISO 5211 | Any | Single-acting | Gear rack/pinion | Clockwise closing | VDI/VDE 3845 (NAMUR) | VDI/VDE 3845 size AA 1 | Safety device | The safety function consists of the drive switching to the defined safety switching position when the compressed air is switched off and the spring chamber is exhausted. This switching movement is achieved by the spring force of the spring assembly. | Up to SIL 2 low demand mode up to SIL 3 in a redundant architecture up to SIL 1 high demand mode | Product can be used in safety-related parts of control systems up to SIL 2, low demand Product can be used in safety-related parts of control systems up to SIL 1, high demand up to SIL 3 in a redundant architecture | See certificate | as per EU explosion protection directive (ATEX) | acc. to UK EX instructions | EPL Db (GB) EPL Gb (GB) | Zone 1 (ATEX) Zone 1 (UKEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 21 (UKEX) Zone 22 (ATEX) | DNV TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.01/2023 | II 2G | II 2D | Ex h IIC T4 Gb X | Ex h IIIC T105°C Db X | -20 <= Ta <= +80 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Dew point min. 10 °C below the ambient temperature and temperature of medium Operation with oil lubrication possible (required for further use) | VDMA24364-B1/B2-L | 1126 | 1.01e-07 | 0.00078 | 3.1 | T17 | RoHS-compliant | Wrought aluminum alloy, anodized | Die-cast aluminum | POM | High-alloy stainless steel | 14.8 | 29.2 | Spring steel | 3746 | ||
| 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy, anodized | High-alloy stainless steel | 90 | 3.5 | G1/8 | 80 | 19 | 35.1 | 18.3 | - | 1 - Low corrosion stress | F07 | -5 ... 5 | -5 ... 5 | ISO 5211 | Any | Single-acting | Gear rack/pinion | Clockwise closing | VDI/VDE 3845 (NAMUR) | VDI/VDE 3845 size AA 1 | Safety device | The safety function consists of the drive switching to the defined safety switching position when the compressed air is switched off and the spring chamber is exhausted. This switching movement is achieved by the spring force of the spring assembly. | Up to SIL 2 low demand mode up to SIL 3 in a redundant architecture up to SIL 1 high demand mode | Product can be used in safety-related parts of control systems up to SIL 2, low demand Product can be used in safety-related parts of control systems up to SIL 1, high demand up to SIL 3 in a redundant architecture | See certificate | as per EU explosion protection directive (ATEX) | acc. to UK EX instructions | EPL Db (GB) EPL Gb (GB) | Zone 1 (ATEX) Zone 1 (UKEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 21 (UKEX) Zone 22 (ATEX) | DNV TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.01/2023 | II 2G | II 2D | Ex h IIC T4 Gb X | Ex h IIIC T105°C Db X | -20 <= Ta <= +80 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Dew point min. 10 °C below the ambient temperature and temperature of medium Operation with oil lubrication possible (required for further use) | VDMA24364-B1/B2-L | 1126 | 1.01e-07 | 0.00078 | 3.1 | T17 | RoHS-compliant | Wrought aluminum alloy, anodized | Die-cast aluminum | POM | High-alloy stainless steel | 17.3 | 34.1 | Spring steel | 3785 | ||
| 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy, anodized | High-alloy stainless steel | 90 | 4.5 | G1/8 | 80 | 19 | 45.2 | 23.6 | - | 1 - Low corrosion stress | F07 | -5 ... 5 | -5 ... 5 | ISO 5211 | Any | Single-acting | Gear rack/pinion | Clockwise closing | VDI/VDE 3845 (NAMUR) | VDI/VDE 3845 size AA 1 | Safety device | The safety function consists of the drive switching to the defined safety switching position when the compressed air is switched off and the spring chamber is exhausted. This switching movement is achieved by the spring force of the spring assembly. | Up to SIL 2 low demand mode up to SIL 3 in a redundant architecture up to SIL 1 high demand mode | Product can be used in safety-related parts of control systems up to SIL 2, low demand Product can be used in safety-related parts of control systems up to SIL 1, high demand up to SIL 3 in a redundant architecture | See certificate | as per EU explosion protection directive (ATEX) | acc. to UK EX instructions | EPL Db (GB) EPL Gb (GB) | Zone 1 (ATEX) Zone 1 (UKEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 21 (UKEX) Zone 22 (ATEX) | DNV TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.01/2023 | II 2G | II 2D | Ex h IIC T4 Gb X | Ex h IIIC T105°C Db X | -20 <= Ta <= +80 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Dew point min. 10 °C below the ambient temperature and temperature of medium Operation with oil lubrication possible (required for further use) | VDMA24364-B1/B2-L | 1126 | 1.01e-07 | 0.00078 | 3.1 | T17 | RoHS-compliant | Wrought aluminum alloy, anodized | Die-cast aluminum | POM | High-alloy stainless steel | 22.2 | 43.8 | Spring steel | 3863 | ||
| 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy, anodized | High-alloy stainless steel | 90 | 6 | G1/8 | 80 | 19 | 60.3 | 31.5 | - | 1 - Low corrosion stress | F07 | -5 ... 5 | -5 ... 5 | ISO 5211 | Any | Single-acting | Gear rack/pinion | Clockwise closing | VDI/VDE 3845 (NAMUR) | VDI/VDE 3845 size AA 1 | Safety device | The safety function consists of the drive switching to the defined safety switching position when the compressed air is switched off and the spring chamber is exhausted. This switching movement is achieved by the spring force of the spring assembly. | Up to SIL 2 low demand mode up to SIL 3 in a redundant architecture up to SIL 1 high demand mode | Product can be used in safety-related parts of control systems up to SIL 2, low demand Product can be used in safety-related parts of control systems up to SIL 1, high demand up to SIL 3 in a redundant architecture | See certificate | as per EU explosion protection directive (ATEX) | acc. to UK EX instructions | EPL Db (GB) EPL Gb (GB) | Zone 1 (ATEX) Zone 1 (UKEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 21 (UKEX) Zone 22 (ATEX) | DNV TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.01/2023 | II 2G | II 2D | Ex h IIC T4 Gb X | Ex h IIIC T105°C Db X | -20 <= Ta <= +80 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Dew point min. 10 °C below the ambient temperature and temperature of medium Operation with oil lubrication possible (required for further use) | VDMA24364-B1/B2-L | 1126 | 1.01e-07 | 0.00078 | 3.1 | T17 | RoHS-compliant | Wrought aluminum alloy, anodized | Die-cast aluminum | POM | High-alloy stainless steel | 29.6 | 58.4 | Spring steel | 3970 | ||
| 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy, anodized | High-alloy stainless steel | 90 | 6 | G1/8 | 80 | 19 | 60.3 | 31.5 | - | 1 - Low corrosion stress | F07 | -5 ... 5 | -5 ... 5 | ISO 5211 | Any | Single-acting | Gear rack/pinion | Clockwise closing | VDI/VDE 3845 (NAMUR) | VDI/VDE 3845 size AA 1 | Safety device | The safety function consists of the drive switching to the defined safety switching position when the compressed air is switched off and the spring chamber is exhausted. This switching movement is achieved by the spring force of the spring assembly. | Up to SIL 2 low demand mode up to SIL 3 in a redundant architecture up to SIL 1 high demand mode | Product can be used in safety-related parts of control systems up to SIL 2, low demand Product can be used in safety-related parts of control systems up to SIL 1, high demand up to SIL 3 in a redundant architecture | See certificate | as per EU explosion protection directive (ATEX) | acc. to UK EX instructions | EPL Db (GB) EPL Gb (GB) | Zone 1 (ATEX) Zone 1 (UKEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 21 (UKEX) Zone 22 (ATEX) | DNV TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.01/2023 | II 2G | II 2D | Ex h IIC T4 Gb X | Ex h IIIC T105°C Db X | -20 <= Ta <= +80 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Dew point min. 10 °C below the ambient temperature and temperature of medium Operation with oil lubrication possible (required for further use) | VDMA24364-B1/B2-L | 1126 | 1.01e-07 | 0.00078 | 3.1 | T17 | RoHS-compliant | Wrought aluminum alloy, anodized | Die-cast aluminum | POM | High-alloy stainless steel | 29.6 | 58.4 | Spring steel | 3963 | ||
| 1 Piece(s) | 15 Day(s) | Wrought aluminum alloy, anodized | Steel, nickel-plated | 90 | 6 | G1/8 | 80 | 19 | 60.3 | 31.5 | Compressed air as per ISO 8573-1:2010 [7:4:4] | 2 - Moderate corrosion stress | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 3960 | ||
| 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy, anodized | High-alloy stainless steel | 90 | 6 | G1/8 | 80 | 19 | 60.3 | 31.5 | - | 1 - Low corrosion stress | F0507 | -5 ... 5 | -5 ... 5 | ISO 5211 | Any | Single-acting | Gear rack/pinion | Clockwise closing | VDI/VDE 3845 (NAMUR) | VDI/VDE 3845 size AA 1 | Safety device | The safety function consists of the drive switching to the defined safety switching position when the compressed air is switched off and the spring chamber is exhausted. This switching movement is achieved by the spring force of the spring assembly. | Up to SIL 2 low demand mode up to SIL 3 in a redundant architecture up to SIL 1 high demand mode | Product can be used in safety-related parts of control systems up to SIL 2, low demand Product can be used in safety-related parts of control systems up to SIL 1, high demand up to SIL 3 in a redundant architecture | See certificate | as per EU explosion protection directive (ATEX) | acc. to UK EX instructions | EPL Db (GB) EPL Gb (GB) | Zone 1 (ATEX) Zone 1 (UKEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 21 (UKEX) Zone 22 (ATEX) | DNV TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.01/2023 | II 2G | II 2D | Ex h IIC T4 Gb X | Ex h IIIC T105°C Db X | -20 <= Ta <= +80 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Dew point min. 10 °C below the ambient temperature and temperature of medium Operation with oil lubrication possible (required for further use) | VDMA24364-B1/B2-L | 1126 | 1.01e-07 | 0.00078 | 3.1 | T17 | RoHS-compliant | Wrought aluminum alloy, anodized | Die-cast aluminum | POM | High-alloy stainless steel | 29.6 | 58.4 | Spring steel | 3960 | ||
| 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy, anodized | Steel, nickel-plated | 90 | 5.5 | G1/4 | 1200 | 38 | 1169.4 | 1169.4 | - | 1 - Low corrosion stress | F14 | -5 ... 5 | -5 ... 5 | ISO 5211 | Any | Double-acting | Gear rack/pinion | Clockwise closing | VDI/VDE 3845 (NAMUR) | VDI/VDE 3845 size AA 3 | Safety device | nan | Up to SIL 2 low demand mode up to SIL 3 in a redundant architecture up to SIL 1 high demand mode | Product can be used in safety-related parts of control systems up to SIL 2, low demand Product can be used in safety-related parts of control systems up to SIL 1, high demand up to SIL 3 in a redundant architecture | See certificate | as per EU explosion protection directive (ATEX) | acc. to UK EX instructions | EPL Db (GB) EPL Gb (GB) | Zone 1 (ATEX) Zone 1 (UKEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 21 (UKEX) Zone 22 (ATEX) | DNV TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.01/2023 | II 2G | II 2D | Ex h IIC T4 Gb X | Ex h IIIC T105°C Db X | -20 <= Ta <= +80 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Dew point min. 10 °C below the ambient temperature and temperature of medium Operation with oil lubrication possible (required for further use) | VDMA24364-B1/B2-L | 1126 | 1.01e-07 | 0.00142 | 105 | T36 | RoHS-compliant | Wrought aluminum alloy, anodized | Die-cast aluminum | POM | Steel | - | - | - | 35834 | ||
| 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy, anodized | High-alloy stainless steel | 90 | 5.5 | G1/4 | 1200 | 38 | 1169.4 | 1169.4 | - | 1 - Low corrosion stress | F14 | -5 ... 5 | -5 ... 5 | ISO 5211 | Any | Double-acting | Gear rack/pinion | Clockwise closing | VDI/VDE 3845 (NAMUR) | VDI/VDE 3845 size AA 3 | Safety device | nan | Up to SIL 2 low demand mode up to SIL 3 in a redundant architecture up to SIL 1 high demand mode | Product can be used in safety-related parts of control systems up to SIL 2, low demand Product can be used in safety-related parts of control systems up to SIL 1, high demand up to SIL 3 in a redundant architecture | See certificate | as per EU explosion protection directive (ATEX) | acc. to UK EX instructions | EPL Db (GB) EPL Gb (GB) | Zone 1 (ATEX) Zone 1 (UKEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 21 (UKEX) Zone 22 (ATEX) | DNV TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.01/2023 | II 2G | II 2D | Ex h IIC T4 Gb X | Ex h IIIC T105°C Db X | -20 <= Ta <= +80 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Dew point min. 10 °C below the ambient temperature and temperature of medium Operation with oil lubrication possible (required for further use) | VDMA24364-B1/B2-L | 1126 | 1.01e-07 | 0.00142 | 105 | T36 | RoHS-compliant | Wrought aluminum alloy, anodized | Die-cast aluminum | POM | Steel | - | - | - | 35834 | ||
| 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy, anodized | High-alloy stainless steel | 90 | 4.5 | G1/4 | 1200 | 38 | 608.6 | 376.8 | - | 1 - Low corrosion stress | F14 | -5 ... 5 | -5 ... 5 | ISO 5211 | Any | Single-acting | Gear rack/pinion | Clockwise closing | VDI/VDE 3845 (NAMUR) | VDI/VDE 3845 size AA 3 | Safety device | The safety function consists of the drive switching to the defined safety switching position when the compressed air is switched off and the spring chamber is exhausted. This switching movement is achieved by the spring force of the spring assembly. | Up to SIL 2 low demand mode up to SIL 3 in a redundant architecture up to SIL 1 high demand mode | Product can be used in safety-related parts of control systems up to SIL 2, low demand Product can be used in safety-related parts of control systems up to SIL 1, high demand up to SIL 3 in a redundant architecture | See certificate | as per EU explosion protection directive (ATEX) | acc. to UK EX instructions | EPL Db (GB) EPL Gb (GB) | Zone 1 (ATEX) Zone 1 (UKEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 21 (UKEX) Zone 22 (ATEX) | DNV TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.01/2023 | II 2G | II 2D | Ex h IIC T4 Gb X | Ex h IIIC T105°C Db X | -20 <= Ta <= +80 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Dew point min. 10 °C below the ambient temperature and temperature of medium Operation with oil lubrication possible (required for further use) | VDMA24364-B1/B2-L | 1126 | 1.01e-07 | 0.00078 | 43.5 | T36 | RoHS-compliant | Wrought aluminum alloy, anodized | Die-cast aluminum | POM | Steel | 348.2 | 580 | Spring steel | 41240 | ||
| 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy, anodized | High-alloy stainless steel | 90 | 4.5 | G1/4 | 1200 | 38 | 608.6 | 376.8 | - | 1 - Low corrosion stress | F14 | -5 ... 5 | -5 ... 5 | ISO 5211 | Any | Single-acting | Gear rack/pinion | Clockwise closing | VDI/VDE 3845 (NAMUR) | VDI/VDE 3845 size AA 3 | Safety device | The safety function consists of the drive switching to the defined safety switching position when the compressed air is switched off and the spring chamber is exhausted. This switching movement is achieved by the spring force of the spring assembly. | Up to SIL 2 low demand mode up to SIL 3 in a redundant architecture up to SIL 1 high demand mode | Product can be used in safety-related parts of control systems up to SIL 2, low demand Product can be used in safety-related parts of control systems up to SIL 1, high demand up to SIL 3 in a redundant architecture | See certificate | as per EU explosion protection directive (ATEX) | acc. to UK EX instructions | EPL Db (GB) EPL Gb (GB) | Zone 1 (ATEX) Zone 1 (UKEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 21 (UKEX) Zone 22 (ATEX) | DNV TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.01/2023 | II 2G | II 2D | Ex h IIC T4 Gb X | Ex h IIIC T105°C Db X | -20 <= Ta <= +80 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Dew point min. 10 °C below the ambient temperature and temperature of medium Operation with oil lubrication possible (required for further use) | VDMA24364-B1/B2-L | 1126 | 1.01e-07 | 0.00078 | 43.5 | T36 | RoHS-compliant | Wrought aluminum alloy, anodized | Die-cast aluminum | POM | Steel | 348.2 | 580 | Spring steel | 41240 | ||
| 1 Piece(s) | 25 Day(s) | Wrought aluminum alloy, anodized | Steel, nickel-plated | 90 | 6 | G1/4 | 1200 | 38 | 796.3 | 477.2 | Compressed air as per ISO 8573-1:2010 [7:4:4] | 2 - Moderate corrosion stress | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 43022 | ||
| 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy, anodized | High-alloy stainless steel | 90 | 6 | G1/4 | 1200 | 38 | 796.3 | 477.2 | - | 1 - Low corrosion stress | F14 | -5 ... 5 | -5 ... 5 | ISO 5211 | Any | Single-acting | Gear rack/pinion | Clockwise closing | VDI/VDE 3845 (NAMUR) | VDI/VDE 3845 size AA 3 | Safety device | The safety function consists of the drive switching to the defined safety switching position when the compressed air is switched off and the spring chamber is exhausted. This switching movement is achieved by the spring force of the spring assembly. | Up to SIL 2 low demand mode up to SIL 3 in a redundant architecture up to SIL 1 high demand mode | Product can be used in safety-related parts of control systems up to SIL 2, low demand Product can be used in safety-related parts of control systems up to SIL 1, high demand up to SIL 3 in a redundant architecture | See certificate | as per EU explosion protection directive (ATEX) | acc. to UK EX instructions | EPL Db (GB) EPL Gb (GB) | Zone 1 (ATEX) Zone 1 (UKEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 21 (UKEX) Zone 22 (ATEX) | DNV TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.01/2023 | II 2G | II 2D | Ex h IIC T4 Gb X | Ex h IIIC T105°C Db X | -20 <= Ta <= +80 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Dew point min. 10 °C below the ambient temperature and temperature of medium Operation with oil lubrication possible (required for further use) | VDMA24364-B1/B2-L | 1126 | 1.01e-07 | 0.00078 | 43.5 | T36 | RoHS-compliant | Wrought aluminum alloy, anodized | Die-cast aluminum | POM | Steel | 325.1 | 595 | Spring steel | 43062 | ||
| 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy, anodized | High-alloy stainless steel | 90 | 6 | G1/4 | 1200 | 38 | 796.3 | 477.2 | - | 1 - Low corrosion stress | F14 | -5 ... 5 | -5 ... 5 | ISO 5211 | Any | Single-acting | Gear rack/pinion | Clockwise closing | VDI/VDE 3845 (NAMUR) | VDI/VDE 3845 size AA 3 | Safety device | The safety function consists of the drive switching to the defined safety switching position when the compressed air is switched off and the spring chamber is exhausted. This switching movement is achieved by the spring force of the spring assembly. | Up to SIL 2 low demand mode up to SIL 3 in a redundant architecture up to SIL 1 high demand mode | Product can be used in safety-related parts of control systems up to SIL 2, low demand Product can be used in safety-related parts of control systems up to SIL 1, high demand up to SIL 3 in a redundant architecture | See certificate | as per EU explosion protection directive (ATEX) | acc. to UK EX instructions | EPL Db (GB) EPL Gb (GB) | Zone 1 (ATEX) Zone 1 (UKEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 21 (UKEX) Zone 22 (ATEX) | DNV TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.01/2023 | II 2G | II 2D | Ex h IIC T4 Gb X | Ex h IIIC T105°C Db X | -20 <= Ta <= +80 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Dew point min. 10 °C below the ambient temperature and temperature of medium Operation with oil lubrication possible (required for further use) | VDMA24364-B1/B2-L | 1126 | 1.01e-07 | 0.00078 | 43.5 | T36 | RoHS-compliant | Wrought aluminum alloy, anodized | Die-cast aluminum | POM | Steel | 325.1 | 595 | Spring steel | 43037 | ||
| 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy, anodized | High-alloy stainless steel | 90 | 6 | G1/4 | 1200 | 38 | 796.3 | 477.2 | - | 1 - Low corrosion stress | F14 | -5 ... 5 | -5 ... 5 | ISO 5211 | Any | Single-acting | Gear rack/pinion | Clockwise closing | VDI/VDE 3845 (NAMUR) | VDI/VDE 3845 size AA 3 | Safety device | The safety function consists of the drive switching to the defined safety switching position when the compressed air is switched off and the spring chamber is exhausted. This switching movement is achieved by the spring force of the spring assembly. | Up to SIL 2 low demand mode up to SIL 3 in a redundant architecture up to SIL 1 high demand mode | Product can be used in safety-related parts of control systems up to SIL 2, low demand Product can be used in safety-related parts of control systems up to SIL 1, high demand up to SIL 3 in a redundant architecture | See certificate | as per EU explosion protection directive (ATEX) | acc. to UK EX instructions | EPL Db (GB) EPL Gb (GB) | Zone 1 (ATEX) Zone 1 (UKEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 21 (UKEX) Zone 22 (ATEX) | DNV TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.01/2023 | II 2G | II 2D | Ex h IIC T4 Gb X | Ex h IIIC T105°C Db X | -20 <= Ta <= +80 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Dew point min. 10 °C below the ambient temperature and temperature of medium Operation with oil lubrication possible (required for further use) | VDMA24364-B1/B2-L | 1126 | 1.01e-07 | 0.00078 | 43.5 | T36 | RoHS-compliant | Wrought aluminum alloy, anodized | Die-cast aluminum | POM | Steel | 479.4 | 798.6 | Spring steel | 43022 | ||
| 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy, anodized | Steel, nickel-plated | 90 | 6 | G1/4 | 1200 | 29 | 796.3 | 477.2 | - | 1 - Low corrosion stress | F1012 | -5 ... 5 | -5 ... 5 | ISO 5211 | Any | Single-acting | Gear rack/pinion | Clockwise closing | VDI/VDE 3845 (NAMUR) | VDI/VDE 3845 size AA 3 | Safety device | The safety function consists of the drive switching to the defined safety switching position when the compressed air is switched off and the spring chamber is exhausted. This switching movement is achieved by the spring force of the spring assembly. | Up to SIL 2 low demand mode up to SIL 3 in a redundant architecture up to SIL 1 high demand mode | Product can be used in safety-related parts of control systems up to SIL 2, low demand Product can be used in safety-related parts of control systems up to SIL 1, high demand up to SIL 3 in a redundant architecture | See certificate | as per EU explosion protection directive (ATEX) | acc. to UK EX instructions | EPL Db (GB) EPL Gb (GB) | Zone 1 (ATEX) Zone 1 (UKEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 21 (UKEX) Zone 22 (ATEX) | DNV TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.01/2023 | II 2G | II 2D | Ex h IIC T4 Gb X | Ex h IIIC T105°C Db X | -20 <= Ta <= +80 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Dew point min. 10 °C below the ambient temperature and temperature of medium Operation with oil lubrication possible (required for further use) | VDMA24364-B1/B2-L | 1126 | 1.01e-07 | 0.00078 | 43.5 | T27 | RoHS-compliant | Wrought aluminum alloy, anodized | Die-cast aluminum | POM | Steel | 479.4 | 798.6 | Spring steel | 43022 | ||
| 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy, anodized | High-alloy stainless steel | 90 | 6 | G1/4 | 1200 | 29 | 796.3 | 477.2 | - | 1 - Low corrosion stress | F1012 | -5 ... 5 | -5 ... 5 | ISO 5211 | Any | Single-acting | Gear rack/pinion | Clockwise closing | VDI/VDE 3845 (NAMUR) | VDI/VDE 3845 size AA 3 | Safety device | The safety function consists of the drive switching to the defined safety switching position when the compressed air is switched off and the spring chamber is exhausted. This switching movement is achieved by the spring force of the spring assembly. | Up to SIL 2 low demand mode up to SIL 3 in a redundant architecture up to SIL 1 high demand mode | Product can be used in safety-related parts of control systems up to SIL 2, low demand Product can be used in safety-related parts of control systems up to SIL 1, high demand up to SIL 3 in a redundant architecture | See certificate | as per EU explosion protection directive (ATEX) | acc. to UK EX instructions | EPL Db (GB) EPL Gb (GB) | Zone 1 (ATEX) Zone 1 (UKEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 21 (UKEX) Zone 22 (ATEX) | DNV TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.01/2023 | II 2G | II 2D | Ex h IIC T4 Gb X | Ex h IIIC T105°C Db X | -20 <= Ta <= +80 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Dew point min. 10 °C below the ambient temperature and temperature of medium Operation with oil lubrication possible (required for further use) | VDMA24364-B1/B2-L | 1126 | 1.01e-07 | 0.00078 | 43.5 | T27 | RoHS-compliant | Wrought aluminum alloy, anodized | Die-cast aluminum | POM | Steel | 479.4 | 798.6 | Spring steel | 43022 | ||
| 1 Piece(s) | 15 Day(s) | Wrought aluminum alloy, Anodized | Steel, nickel-plated | 90 | 5.5 | G1/4 | 120 | 19 | 117.4 | 117.4 | Compressed air as per ISO 8573-1:2010 [7:4:4] | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 4872 | ||
| 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy, anodized | High-alloy stainless steel | 90 | 5.5 | G1/4 | 120 | 19 | 117.4 | 117.4 | - | 1 - Low corrosion stress | F0507 | -5 ... 5 | -5 ... 5 | ISO 5211 | Any | Double-acting | Gear rack/pinion | Clockwise closing | VDI/VDE 3845 (NAMUR) | VDI/VDE 3845 size AA 1 | Safety device | nan | Up to SIL 2 low demand mode up to SIL 3 in a redundant architecture up to SIL 1 high demand mode | Product can be used in safety-related parts of control systems up to SIL 2, low demand Product can be used in safety-related parts of control systems up to SIL 1, high demand up to SIL 3 in a redundant architecture | See certificate | as per EU explosion protection directive (ATEX) | acc. to UK EX instructions | EPL Db (GB) EPL Gb (GB) | Zone 1 (ATEX) Zone 1 (UKEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 21 (UKEX) Zone 22 (ATEX) | DNV TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.01/2023 | II 2G | II 2D | Ex h IIC T4 Gb X | Ex h IIIC T105°C Db X | -20 <= Ta <= +80 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Dew point min. 10 °C below the ambient temperature and temperature of medium Operation with oil lubrication possible (required for further use) | VDMA24364-B1/B2-L | 1126 | 1.01e-07 | 0.00142 | 10.4 | T17 | RoHS-compliant | Wrought aluminum alloy, anodized | Die-cast aluminum | POM | High-alloy stainless steel | - | - | - | 4872 | ||
| 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy, Anodized | Steel, nickel-plated | 90 | 3 | G1/4 | 120 | 19 | 43 | 22.4 | Compressed air as per ISO 8573-1:2010 [7:4:4] | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 5422 | ||
| 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy, anodized | High-alloy stainless steel | 90 | 3 | G1/4 | 120 | 19 | 43 | 22.4 | - | 1 - Low corrosion stress | F0507 | -5 ... 5 | -5 ... 5 | ISO 5211 | Any | Single-acting | Gear rack/pinion | Clockwise closing | VDI/VDE 3845 (NAMUR) | VDI/VDE 3845 size AA 1 | Safety device | The safety function consists of the drive switching to the defined safety switching position when the compressed air is switched off and the spring chamber is exhausted. This switching movement is achieved by the spring force of the spring assembly. | Up to SIL 2 low demand mode up to SIL 3 in a redundant architecture up to SIL 1 high demand mode | Product can be used in safety-related parts of control systems up to SIL 2, low demand Product can be used in safety-related parts of control systems up to SIL 1, high demand up to SIL 3 in a redundant architecture | See certificate | as per EU explosion protection directive (ATEX) | acc. to UK EX instructions | EPL Db (GB) EPL Gb (GB) | Zone 1 (ATEX) Zone 1 (UKEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 21 (UKEX) Zone 22 (ATEX) | DNV TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.01/2023 | II 2G | II 2D | Ex h IIC T4 Gb X | Ex h IIIC T105°C Db X | -20 <= Ta <= +80 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Dew point min. 10 °C below the ambient temperature and temperature of medium Operation with oil lubrication possible (required for further use) | VDMA24364-B1/B2-L | 1126 | 1.01e-07 | 0.00078 | 4.3 | T17 | RoHS-compliant | Wrought aluminum alloy, anodized | Die-cast aluminum | POM | High-alloy stainless steel | 21.1 | 41.6 | Spring steel | 5422 | ||
| 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy, anodized | High-alloy stainless steel | 90 | 3.5 | G1/4 | 120 | 19 | 50.1 | 26.1 | - | 1 - Low corrosion stress | F07 | -5 ... 5 | -5 ... 5 | ISO 5211 | Any | Single-acting | Gear rack/pinion | Clockwise closing | VDI/VDE 3845 (NAMUR) | VDI/VDE 3845 size AA 1 | Safety device | The safety function consists of the drive switching to the defined safety switching position when the compressed air is switched off and the spring chamber is exhausted. This switching movement is achieved by the spring force of the spring assembly. | Up to SIL 2 low demand mode up to SIL 3 in a redundant architecture up to SIL 1 high demand mode | Product can be used in safety-related parts of control systems up to SIL 2, low demand Product can be used in safety-related parts of control systems up to SIL 1, high demand up to SIL 3 in a redundant architecture | See certificate | as per EU explosion protection directive (ATEX) | acc. to UK EX instructions | EPL Db (GB) EPL Gb (GB) | Zone 1 (ATEX) Zone 1 (UKEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 21 (UKEX) Zone 22 (ATEX) | DNV TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.01/2023 | II 2G | II 2D | Ex h IIC T4 Gb X | Ex h IIIC T105°C Db X | -20 <= Ta <= +80 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Dew point min. 10 °C below the ambient temperature and temperature of medium Operation with oil lubrication possible (required for further use) | VDMA24364-B1/B2-L | 1126 | 1.01e-07 | 0.00078 | 4.3 | T17 | RoHS-compliant | Wrought aluminum alloy, anodized | Die-cast aluminum | POM | High-alloy stainless steel | 24.6 | 48.6 | Spring steel | 5485 | ||
| 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy, anodized | High-alloy stainless steel | 90 | 3.5 | G1/4 | 120 | 19 | 50.1 | 26.1 | - | 1 - Low corrosion stress | F07 | -5 ... 5 | -5 ... 5 | ISO 5211 | Any | Single-acting | Gear rack/pinion | Clockwise closing | VDI/VDE 3845 (NAMUR) | VDI/VDE 3845 size AA 1 | Safety device | The safety function consists of the drive switching to the defined safety switching position when the compressed air is switched off and the spring chamber is exhausted. This switching movement is achieved by the spring force of the spring assembly. | Up to SIL 2 low demand mode up to SIL 3 in a redundant architecture up to SIL 1 high demand mode | Product can be used in safety-related parts of control systems up to SIL 2, low demand Product can be used in safety-related parts of control systems up to SIL 1, high demand up to SIL 3 in a redundant architecture | See certificate | as per EU explosion protection directive (ATEX) | acc. to UK EX instructions | EPL Db (GB) EPL Gb (GB) | Zone 1 (ATEX) Zone 1 (UKEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 21 (UKEX) Zone 22 (ATEX) | DNV TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.01/2023 | II 2G | II 2D | Ex h IIC T4 Gb X | Ex h IIIC T105°C Db X | -20 <= Ta <= +80 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Dew point min. 10 °C below the ambient temperature and temperature of medium Operation with oil lubrication possible (required for further use) | VDMA24364-B1/B2-L | 1126 | 1.01e-07 | 0.00078 | 4.3 | T17 | RoHS-compliant | Wrought aluminum alloy, anodized | Die-cast aluminum | POM | High-alloy stainless steel | 24.6 | 48.6 | Spring steel | 5476 | ||
| 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy, anodized | High-alloy stainless steel | 90 | 6 | G1/4 | 120 | 19 | 86 | 44.8 | - | 1 - Low corrosion stress | F07 | -5 ... 5 | -5 ... 5 | ISO 5211 | Any | Single-acting | Gear rack/pinion | Clockwise closing | VDI/VDE 3845 (NAMUR) | VDI/VDE 3845 size AA 1 | Safety device | The safety function consists of the drive switching to the defined safety switching position when the compressed air is switched off and the spring chamber is exhausted. This switching movement is achieved by the spring force of the spring assembly. | Up to SIL 2 low demand mode up to SIL 3 in a redundant architecture up to SIL 1 high demand mode | Product can be used in safety-related parts of control systems up to SIL 2, low demand Product can be used in safety-related parts of control systems up to SIL 1, high demand up to SIL 3 in a redundant architecture | See certificate | as per EU explosion protection directive (ATEX) | acc. to UK EX instructions | EPL Db (GB) EPL Gb (GB) | Zone 1 (ATEX) Zone 1 (UKEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 21 (UKEX) Zone 22 (ATEX) | DNV TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.01/2023 | II 2G | II 2D | Ex h IIC T4 Gb X | Ex h IIIC T105°C Db X | -20 <= Ta <= +80 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Dew point min. 10 °C below the ambient temperature and temperature of medium Operation with oil lubrication possible (required for further use) | VDMA24364-B1/B2-L | 1126 | 1.01e-07 | 0.00078 | 4.3 | T17 | RoHS-compliant | Wrought aluminum alloy, anodized | Die-cast aluminum | POM | High-alloy stainless steel | 42.1 | 83.3 | Spring steel | 5747 | ||
| 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy, anodized | High-alloy stainless steel | 90 | 6 | G1/4 | 120 | 19 | 86 | 44.8 | - | 1 - Low corrosion stress | F07 | -5 ... 5 | -5 ... 5 | ISO 5211 | Any | Single-acting | Gear rack/pinion | Clockwise closing | VDI/VDE 3845 (NAMUR) | VDI/VDE 3845 size AA 1 | Safety device | The safety function consists of the drive switching to the defined safety switching position when the compressed air is switched off and the spring chamber is exhausted. This switching movement is achieved by the spring force of the spring assembly. | Up to SIL 2 low demand mode up to SIL 3 in a redundant architecture up to SIL 1 high demand mode | Product can be used in safety-related parts of control systems up to SIL 2, low demand Product can be used in safety-related parts of control systems up to SIL 1, high demand up to SIL 3 in a redundant architecture | See certificate | as per EU explosion protection directive (ATEX) | acc. to UK EX instructions | EPL Db (GB) EPL Gb (GB) | Zone 1 (ATEX) Zone 1 (UKEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 21 (UKEX) Zone 22 (ATEX) | DNV TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.01/2023 | II 2G | II 2D | Ex h IIC T4 Gb X | Ex h IIIC T105°C Db X | -20 <= Ta <= +80 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Dew point min. 10 °C below the ambient temperature and temperature of medium Operation with oil lubrication possible (required for further use) | VDMA24364-B1/B2-L | 1126 | 1.01e-07 | 0.00078 | 4.3 | T17 | RoHS-compliant | Wrought aluminum alloy, anodized | Die-cast aluminum | POM | High-alloy stainless steel | 42.1 | 83.3 | Spring steel | 5738 | ||
| 1 Piece(s) | 15 Day(s) | Wrought aluminum alloy, anodized | Steel, nickel-plated | 90 | 6 | G1/4 | 120 | 19 | 86 | 44.8 | Compressed air as per ISO 8573-1:2010 [7:4:4] | 2 - Moderate corrosion stress | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 5736 | ||
| 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy, anodized | High-alloy stainless steel | 90 | 6 | G1/4 | 120 | 19 | 86 | 44.8 | - | 1 - Low corrosion stress | F0507 | -5 ... 5 | -5 ... 5 | ISO 5211 | Any | Single-acting | Gear rack/pinion | Clockwise closing | VDI/VDE 3845 (NAMUR) | VDI/VDE 3845 size AA 1 | Safety device | The safety function consists of the drive switching to the defined safety switching position when the compressed air is switched off and the spring chamber is exhausted. This switching movement is achieved by the spring force of the spring assembly. | Up to SIL 2 low demand mode up to SIL 3 in a redundant architecture up to SIL 1 high demand mode | Product can be used in safety-related parts of control systems up to SIL 2, low demand Product can be used in safety-related parts of control systems up to SIL 1, high demand up to SIL 3 in a redundant architecture | See certificate | as per EU explosion protection directive (ATEX) | acc. to UK EX instructions | EPL Db (GB) EPL Gb (GB) | Zone 1 (ATEX) Zone 1 (UKEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 21 (UKEX) Zone 22 (ATEX) | DNV TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.01/2023 | II 2G | II 2D | Ex h IIC T4 Gb X | Ex h IIIC T105°C Db X | -20 <= Ta <= +80 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Dew point min. 10 °C below the ambient temperature and temperature of medium Operation with oil lubrication possible (required for further use) | VDMA24364-B1/B2-L | 1126 | 1.01e-07 | 0.00078 | 4.3 | T17 | RoHS-compliant | Wrought aluminum alloy, anodized | Die-cast aluminum | POM | High-alloy stainless steel | 42.1 | 83.3 | Spring steel | 5736 | ||
| 1 Piece(s) | 15 Day(s) | Wrought aluminum alloy, anodized | Steel, nickel-plated | 90 | 5.5 | G1/4 | 160 | 24 | 161 | 161 | Compressed air as per ISO 8573-1:2010 [7:4:4] | 2 - Moderate corrosion stress | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 6082 | ||
| 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy, anodized | High-alloy stainless steel | 90 | 5.5 | G1/4 | 160 | 24 | 161 | 161 | - | 1 - Low corrosion stress | F0710 | -5 ... 5 | -5 ... 5 | ISO 5211 | Any | Double-acting | Gear rack/pinion | Clockwise closing | VDI/VDE 3845 (NAMUR) | VDI/VDE 3845 size AA 1 | Safety device | nan | Up to SIL 2 low demand mode up to SIL 3 in a redundant architecture up to SIL 1 high demand mode | Product can be used in safety-related parts of control systems up to SIL 2, low demand Product can be used in safety-related parts of control systems up to SIL 1, high demand up to SIL 3 in a redundant architecture | See certificate | as per EU explosion protection directive (ATEX) | acc. to UK EX instructions | EPL Db (GB) EPL Gb (GB) | Zone 1 (ATEX) Zone 1 (UKEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 21 (UKEX) Zone 22 (ATEX) | DNV TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.01/2023 | II 2G | II 2D | Ex h IIC T4 Gb X | Ex h IIIC T105°C Db X | -20 <= Ta <= +80 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Dew point min. 10 °C below the ambient temperature and temperature of medium Operation with oil lubrication possible (required for further use) | VDMA24364-B1/B2-L | 1126 | 1.01e-07 | 0.00142 | 14 | T22 | RoHS-compliant | Wrought aluminum alloy, anodized | Die-cast aluminum | POM | High-alloy stainless steel | - | - | - | 6082 | ||
| 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy, anodized | Steel, nickel-plated | 90 | 3 | G1/4 | 160 | 24 | 59 | 30.7 | - | 1 - Low corrosion stress | F0710 | -5 ... 5 | -5 ... 5 | ISO 5211 | Any | Single-acting | Gear rack/pinion | Clockwise closing | VDI/VDE 3845 (NAMUR) | VDI/VDE 3845 size AA 1 | Safety device | The safety function consists of the drive switching to the defined safety switching position when the compressed air is switched off and the spring chamber is exhausted. This switching movement is achieved by the spring force of the spring assembly. | Up to SIL 2 low demand mode up to SIL 3 in a redundant architecture up to SIL 1 high demand mode | Product can be used in safety-related parts of control systems up to SIL 2, low demand Product can be used in safety-related parts of control systems up to SIL 1, high demand up to SIL 3 in a redundant architecture | See certificate | as per EU explosion protection directive (ATEX) | acc. to UK EX instructions | EPL Db (GB) EPL Gb (GB) | Zone 1 (ATEX) Zone 1 (UKEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 21 (UKEX) Zone 22 (ATEX) | DNV TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.01/2023 | II 2G | II 2D | Ex h IIC T4 Gb X | Ex h IIIC T105°C Db X | -20 <= Ta <= +80 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Dew point min. 10 °C below the ambient temperature and temperature of medium Operation with oil lubrication possible (required for further use) | VDMA24364-B1/B2-L | 1126 | 1.01e-07 | 0.00078 | 5.9 | T22 | RoHS-compliant | Wrought aluminum alloy, anodized | Die-cast aluminum | POM | High-alloy stainless steel | 28.9 | 57.1 | Spring steel | 6767 | ||
| 1 Piece(s) | 20 Day(s) | Wrought aluminum alloy, anodized | High-alloy stainless steel | 90 | 6 | G1/4 | 160 | 24 | 117.9 | 61.4 | - | 1 - Low corrosion stress | F07 | -5 ... 5 | -5 ... 5 | ISO 5211 | Any | Single-acting | Gear rack/pinion | Clockwise closing | VDI/VDE 3845 (NAMUR) | VDI/VDE 3845 size AA 1 | Safety device | The safety function consists of the drive switching to the defined safety switching position when the compressed air is switched off and the spring chamber is exhausted. This switching movement is achieved by the spring force of the spring assembly. | Up to SIL 2 low demand mode up to SIL 3 in a redundant architecture up to SIL 1 high demand mode | Product can be used in safety-related parts of control systems up to SIL 2, low demand Product can be used in safety-related parts of control systems up to SIL 1, high demand up to SIL 3 in a redundant architecture | See certificate | as per EU explosion protection directive (ATEX) | acc. to UK EX instructions | EPL Db (GB) EPL Gb (GB) | Zone 1 (ATEX) Zone 1 (UKEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 21 (UKEX) Zone 22 (ATEX) | DNV TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.01/2023 | II 2G | II 2D | Ex h IIC T4 Gb X | Ex h IIIC T105°C Db X | -20 <= Ta <= +80 | Compressed air as per ISO 8573-1:2010 [7:4:4] | Dew point min. 10 °C below the ambient temperature and temperature of medium Operation with oil lubrication possible (required for further use) | VDMA24364-B1/B2-L | 1126 | 1.01e-07 | 0.00078 | 5.9 | T22 | RoHS-compliant | Wrought aluminum alloy, anodized | Die-cast aluminum | POM | High-alloy stainless steel | 57.7 | 114.2 | Spring steel | 7196 |
Loading...
Basic Information
| Operating Pressure Range(MPa) | 0.2::0.8 | Cover material | Die-cast aluminum, coated | Seals material | NBR |
|---|---|---|---|---|---|
| Material of screws | High-alloy stainless steel | Min. Ambient temperature(°C) | -20 | Max. Ambient temperature(°C) | 80 |
| Min. Storage temperature(°C) | -20 | Max. Storage temperature(°C) | 60 |
Specification/Dimensions
-
Housing material
- Wrought aluminum alloy, Anodized
- Wrought aluminum alloy, anodized
-
Shaft material
- High-alloy stainless steel
- Steel, nickel-plated
-
Swivel angle(deg)
- 90
- 120
- 180
-
Nominal operating pressure(bar)
- 3
- 3.5
- 4.5
- 5.5
- 6
-
Pneumatic connection
- G1/4
- G1/8
-
Size of valve actuator
-
Depth shaft connection(mm)
- 10
- 12
- 16
- 19
- 24
- 29
- 38
- 48
-
Torque at nominal operating pressure and 0° swivel angle(Nm)
-
Torque at nominal operating pressure and 90° swivel angle(Nm)
-
Operating medium
- Compressed air as per ISO 8573-1:2010 [7:4:4]
-
Corrosion resistance class (CRC)
- 1 - Low corrosion stress
- 2 - Moderate corrosion stress
-
Flange hole pattern
-
End-position adjusting range at 0°(deg)
- -5 ... 5
-
End-position adjusting range at nominal swivel angle(deg)
- -5 ... 5
-
Standard connection for valve
- ISO 5211
-
Mounting position
- Any
-
Mode of operation
- Double-acting
- Single-acting
-
Structural design
- Gear rack/pinion
-
Closing direction
- Clockwise closing
-
Valve connection conforms to standard
- VDI/VDE 3845 (NAMUR)
-
Connection point for positioner and position sensor conforms to standard
- VDI/VDE 3845 size AA 1
- VDI/VDE 3845 size AA 2
- VDI/VDE 3845 size AA 3
-
Devices type according to VDMA 66413
- Safety device
-
Safety function
- The safety function consists of the drive switching to the defined safety switching position when the compressed air is switched off and the spring chamber is exhausted. This switching movement is achieved by the spring force of the spring assembly.
- nan
-
Safety integrity level (SIL)
- Up to SIL 2 low demand mode up to SIL 3 in a redundant architecture up to SIL 1 high demand mode
-
Certified for safety function to ISO 13849 and IEC 61508 (SIL)
- Product can be used in safety-related parts of control systems up to SIL 2, low demand Product can be used in safety-related parts of control systems up to SIL 1, high demand up to SIL 3 in a redundant architecture
-
Maritime classification
- See certificate
-
CE marking (see declaration of conformity)
- as per EU explosion protection directive (ATEX)
-
UKCA marking (see declaration of conformity)
- acc. to UK EX instructions
-
Explosion protection certification outside the EU
- EPL Db (GB) EPL Gb (GB)
-
Explosion prevention and protection
- Zone 1 (ATEX) Zone 1 (UKEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 21 (UKEX) Zone 22 (ATEX)
-
Certificate issuing authority
- DNV TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.01/2023
-
ATEX category gas
- II 2G
-
ATEX category for dust
- II 2D
-
Type of ignition protection for gas
- Ex h IIC T4 Gb X
-
Type of (ignition) protection for dust
- Ex h IIIC T105°C Db X
-
Explosive ambient temperature(°C)
- -20 <= Ta <= +80
-
Information on operating and pilot media
- Compressed air as per ISO 8573-1:2010 [7:4:4]
-
LABS (PWIS) conformity
- Dew point min. 10 °C below the ambient temperature and temperature of medium Operation with oil lubrication possible (required for further use)
-
MTTFd(years)
- VDMA24364-B1/B2-L
-
PFH
- 1126
-
PFD
- 1.01e-07
-
Air consumption at 6 bar per cycle 0°-nominal swivel angle-0°(l)
- 0.00078
- 0.00142
-
Shaft connection
-
Note on materials
- T9
- T11
- T14
- T17
- T22
- T27
- T36
- T46
-
Material of sub-base
- RoHS-compliant
-
Material of piston
- Wrought aluminum alloy, anodized
-
Material of bearing
- Die-cast aluminum
-
Cam material
- POM
-
Spring return torque at 0° swivel angle(Nm)
- High-alloy stainless steel
- Steel
-
Spring return torque with 90° swivel angle(Nm)
-
Material of spring
Days to Ship
-
- All
- 4 Day(s) or Less
- 15 Day(s) or Less
- 20 Day(s) or Less
- 25 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
-
Credit Card
Kartu Kredit
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy