(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

ULTRA WX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Stub (Corner Protect Type)_WX-G-EDSS

ULTRA WX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Stub (Corner Protect Type)_WX-G-EDSS

Heavy duty type 2-flute end mill with reinforced bottom blade corner. Capable of heavy cutting thanks to its rigid short blade length. Enables reductions in lead time during mass production machining.

PDF

Part Number

Configured Part Number is shown.

 
Part Number
WX-G-EDSS-1
WX-G-EDSS-1.2
WX-G-EDSS-1.5
WX-G-EDSS-1.8
WX-G-EDSS-2
WX-G-EDSS-2.5
WX-G-EDSS-2.8
WX-G-EDSS-3
WX-G-EDSS-3.5
WX-G-EDSS-4
WX-G-EDSS-4.5
WX-G-EDSS-5
WX-G-EDSS-5.5
WX-G-EDSS-6
WX-G-EDSS-7
WX-G-EDSS-8
WX-G-EDSS-9
WX-G-EDSS-10
WX-G-EDSS-12
Part NumberMinimum order quantityVolume DiscountDays to ShipBlade diameter (D)
(φ)
Blade length (ℓ)
(mm)
Shank diameter (d)
(mm)
Overall Length (L)
(mm)
Tool No.
1 Piece(s) 12 Day(s) or more 11.54403019010
1 Piece(s) 12 Day(s) or more 1.21.84403019012
1 Piece(s) 12 Day(s) or more 1.52.34403019015
1 Piece(s) 12 Day(s) or more 1.82.74403019018
1 Piece(s) 12 Day(s) or more 234403019020
1 Piece(s) 12 Day(s) or more 2.53.74403019025
1 Piece(s) 8 Day(s) or more 2.84.24403019028
1 Piece(s) 12 Day(s) or more 34.56503019030
1 Piece(s) 8 Day(s) or more 3.55.36503019035
1 Piece(s) 12 Day(s) or more 466503019040
1 Piece(s) 12 Day(s) or more 4.56.86503019045
1 Piece(s) 8 Day(s) or more 57.56503019050
1 Piece(s) 12 Day(s) or more 5.58.36503019055
1 Piece(s) 12 Day(s) or more 696503019060
1 Piece(s) 12 Day(s) or more 7118603019070
1 Piece(s) 8 Day(s) or more 8128603019080
1 Piece(s) 12 Day(s) or more 91410703019090
1 Piece(s) 12 Day(s) or more 101510703019100
1 Piece(s) 12 Day(s) or more 121812753019120

Loading...

  1. 1

Basic Information

work material General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / High-Hardness Steel ~ HRC60 / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper Number of flutes(sheet) 2 Type Square
Coating TiAlN Machining Application Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting Blade tip shape With Lead
Torsion Angle (θ) Standard Helix (30 to 40°) Flute Diameter Tolerance(mm) 0~-0.02

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:021-8990-4102 / FAX:021-8990-5803
8:30am - 5:30pm (Monday - Friday)