Control Boxes（Installation：Indoor）

• 

  [CH-A] CH Series Box (with Dustproof Sealing)

  NITTO KOGYO

  Improved workability and ease of use with a number of different variations. Positioning of the ground terminal at the front simplifies ground terminal wiring work.
  [Features] · A large amount of space is available for forming mounting holes on the back side of the cabinet.
  · The external appearance has been simplified by utilizing internal hinges to secure the base plate with minimal protruding screws.
  [Materials] Box: Steel, Handle: Snap Latch (Stainless Steel), Base Panel: Steel
  [Specifications] (Panel Thickness) Door: 1.6 mm, Body: 1.2 mm
  Door Opening/Closing: Single-Opening
  Bidirectional wiring is supported.

  CAD ：

  2D

  Days to Ship:	Same day or more

• 

  CL・CL Series Box (Waterproof / Dustproof Design)

  NITTO KOGYO

  CL series box is a corner handle design airtight cabinet.
  
  [Features]
  · A corner handle design airtight cabinet. IP65 equivalent airtight performance.
  · The corner handle provides a strong seal with simple open/close operation and locking via a padlock is also supported.
  · By positioning the handle on the corner of the door, the design has been simplified. This allows for greater utilization of the door surface.
  · Use of urethane foam sealing with no joints that does not readily peel provides high airtightness and maintains stability.
  · By masking the sealing, the color of the cabinet can be changed with a baked finish that will not peel off.
  · An environmentally friendly powder coating is utilized for its excellent durability.

  CAD ：

  2D

  Days to Ship:	Same day or more

• 

  STB_STS / Stainless Steel Base Cabinet

  NITTO KOGYO

  STB_STS is a stainless-steel base cabinet with superior corrosion resistance.
  
  [Features]
  · A stainless-steel base cabinet with superior corrosion resistance.
  · Stainless steel is used as a material.
  · The handle has a rounded, ergonomic design and also supports different key numbers.

  CAD ：

  2D

  Days to Ship:	10 Day(s) or more

• 

  Cabinet Compliant with FUL Machinery Safety Standards (Includes Door-Locking Nut)

  NITTO KOGYO

  [Features]
  - TÜV/CE/UL certified.
  - Cabinet for FA machinery that factors in mechanical safety.
  - Handle with key and door fixing screws (M5, up/down) makes it difficult for it to be unlocked by those outside.
  · By using a base plate made of galvanized steel sheet, conductivity can be ensured via contact with mounted equipment, so therefore paint removal is not necessary, and establishment of an equipotential bonding connection is simple.
  · The iron sheet uses a structure that is electrically connected to the body.
  - Because it incorporates 24 (M4~M10) grounding terminals, connection is also possible even when there are multiple input power supplies.
  - Optional iron sheet enables a variety of layouts and substantial space-savings.
  - Installation of the handle on the exterior from the body aperture expands usable range on the plate surface.
  · Dust intrusion is prevented to avoid a potential buildup of internal negative pressure.

  CAD ：

  2D

  Days to Ship:	21 Day(s) or more

• 

  Control box T series

  SETTSUMETAL

  [Features]
  · Steel control box.
  · The door is secured using a simple clasp lock.

  Days to Ship:	14 Day(s) or more

• 

  SW-N / Stainless Steel Window Cabinet (Draining, with Waterproof/Dustproof Sealing)

  NITTO KOGYO

  SW-N series is a large windowed cabinet with a drainage mechanism and waterproof and dust proof sealing.
  
  [Features]
  · A large stainless steel windowed cabinet and drain mechanism as well as waterproof and dust proof sealing.
  · Provided with a large window enabling viewing of inside the cabinet.
  · There are no protrusions from the door surface, so the appearance is clean.
  · Can be locked using a padlock.
  · A catch clip is used for opening and closing the door.

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  AE Compact Box

  RITTAL

  The AE Compact Box can be used as a control/operations panel for equipment and machinery of all kinds in the field of factory automation.
  It meets international standards such as UL and CSA and complies with CE marking, allowing it to be used throughout the world.
  It also meets the protection grades IP66 (single door) and IP55 (double door).
  
  [Features]
  · Optimum corrosion prevention by triple treatment of the housing surface
  · Long-lasting high protection grade thanks to the gap-free application of a PU (polyurethane) foam seal
  · The housing protection groove (opening) is folded several times for optimal protection and prevention of intrusion of dust and water when the door opens and closes
  · For easy wall mounting, the rear panel has holes for direct attachment to a wall anchor or surface
  · Maximum flexibility for cable lead-in thanks to a plate with punched holes that can be used as a substitute for a steel ground plate for self-assembly
  · Interior rails for mounting at any depth
  · The 1-door box lets you quickly change the door hinge position (door opening/closing direction) without machining
  · The flange with holes inside the door allows quick assembly of accessories such as support rails and cable duct holders
  [Product specifications]
  · Material/surface treatment: ordinary steel plate / powder coating
  · Paint color: RAL 7035 (light gray [approximate Munsell value 2.5PB8.5/1])
  · Certifications: CE, UL, cUL, CSA, TÜV, Germanischer Lloyd, Russian Maritime Register of Shipping,
  Lloyds Register of Shipping, Bureau Veritas
  · Protection grade: Two types: IP55 (NEMA 12), IP66 (NEMA 4)
  [Accessories]
  · Mounting plate / handle (double bit) / ground plate
  

  Days to Ship:	8 Day(s) or more

• 

  B_S / Board Cabinet / Exposed, Depth: 200 mm

  NITTO KOGYO

  B_S20 series is a highly advanced board cabinet. A wide range of needs are supported by a wide variety of models.

  CAD ：

  2D

  Days to Ship:	14 Day(s) or more

• 

  BBF Plastic Box, Standard, For PTM-BBF/FTTH

  NITTO KOGYO

  PTM-BBF series box is a plastic broadband box for compact storage of FTTH communications equipment.
  
  [Features]
  · A semi-buried plastic communication box able to make installation spaces more compact.
  · Compact storage of telecommunication equipment, optical connection boxes, HUBs, distributors, and telephone terminals for collective housing buildings or a single unit home.
  ▪ Enables neat storage of communications equipment and Internet wiring.
  ▪ The structure is even more compact thanks to space saving achieved through the use of a three-unit structure.
  · Semi-embedded for minimal protrusion from wall surfaces.
  · The front/middle units are hinged opening/closing types for easy mounting and maintenance.
  · An environmentally friendly model that utilizes biomass plastic (polylactic acid) and a styrene-based resin model are available.

  CAD ：

  2D

  Days to Ship:	20 Day(s) or more

• 

  L / Light Cabinet

  NITTO KOGYO

  L series is an environmentally friendly cabinet with lighter weight to achieve resource savings and labor savings.
  
  [Features]
  • Optimal strength and structure design achieves 50% lighter weight than the conventional model.
  • Reverse door response can easily be performed on site.
  • Pivot hinge enables single-action door removal.
  • A wide entrance and base plate enables effective use of space inside the cabinet.
  • Cabinet that uses, etc., resource savings, conformance to the RoHS directive, lead free paint, low formaldehyde wood base plates (F☆☆☆☆), for consideration of the natural environment.
  • A wall surface mounting hole (⌀9) is newly installed on the back surface four corners, so that hole mounting process is unnecessary on-site.

  CAD ：

  2D

  Days to Ship:	14 Day(s) or more

• 

  PD・PD Series Control Panel Cabinet (with Dustproof Sealing)

  NITTO KOGYO

  PD series cabinet is a sloping cabinet that is easy to operate from above.
  
  [Features]
  · Sloping cabinet that is easy to operate from above.
  · The operation panel is attached on top of the sloping surface.
  · Utilizes a lockable, waterproof flat-handle with superior functionality and design (Key #N200).
  · A ground terminal compliant with public building construction standards is used.
  The cabinet can also be used as a desk type cabinet in combination with the optional base (ZA).

  CAD ：

  2D

  Days to Ship:	15 Day(s) or more

• 

  PTM-BL Model Communication Plastic Box / Standard (with Wooden Board)

  NITTO KOGYO

  PTM-BL series box is made from a flame-retardant, styrene-based resin with a wooden board for conventional mounting.
  
  [Features]
  · Made from styrene-based resin with a wooden board for conventional mounting.
  · A styrene-based resin product with a wooden board.
  · Suitable for securely mounting equipment such as fiber optic junction boxes, etc.
  · Wiring is simplified thanks to a single-action attachable/detachable cover.
  · Protruding wire knockouts are installed in the top/bottom/left/right surfaces of the cover. Wires can be fed in or out of each side.

  CAD ：

  2D

  Days to Ship:	14 Day(s) or more

• 

  PTM_PTME / Communications Plastic Box (Cabinet for Stowing Telephone Terminals)

  NITTO KOGYO

  PTM_PTME series has no terminal plate installed. For stowing telephone terminals and communications equipment.
  
  [Features]
  · No terminal plate is installed.
  · For stowing telephone terminals and communications equipment.
  · Two models are available: An environmentally friendly model that utilizes biomass plastic and a standard model that utilizes styrene-based resin.
  · Wiring work is simplified via a single-action attachable/detachable cover. Suitable for installation in confined areas where there is no room for opening/closing doors.
  · Protruding wire knockouts are installed in the top/bottom/left/right surfaces of the cover. Wires can be fed in/out of each side.

  CAD ：

  2D

  Days to Ship:	20 Day(s) or more

• 

  B_S / Board Cabinet / Exposed, Depth: 250 mm

  NITTO KOGYO

  B_S25 series is a highly advanced board cabinet. A wide range of needs are supported by a wide variety of models.

  CAD ：

  2D

  Days to Ship:	15 Day(s) or more

• 

  CH-YA・CH Series Box, Horizontally Long (with Dust Proof Sealing)

  NITTO KOGYO

  CH-YA series is a compact cabinet for an open field network.
  
  [Features]
  • The long compact cabinet can effectively use a limited space.
  • Suitable for stowing a remote I/O, terminal block, or other device level equipment.
  • The handle is compact so it can be opened or closed with a screwdriver.
  • The door opens downward, with a stay for supporting the door (excluding CH12-315YA).

  CAD ：

  2D

  Days to Ship:	14 Day(s) or more

• 

  CL-U・CL Series Box (Waterproof / Dustproof Design) / International Standard / Certified

  NITTO KOGYO

  CL-U series is a UL/TUV certified corner handle design.
  
  [Features]
  · UL/CE/TUV certified corner handle design.
  · By using galvanized steel plate, contact continuity between mounted equipment and international standard certified model (CL-U) is assured. The equipotential bonding connection is simplified.
  · The iron sheet uses a structure that is electrically connected to the body.
  · Includes rear mounting holes.
  ▪ Airtight performance equivalent to IP65.
  · The corner handle provides a strong seal with simple open/close operation and locking with a padlock is also feasible.
  · By positioning the handle on the corner of the door, the design has been simplified, allowing for greater utilization of the door surface.
  · Use of urethane foam sealing with no joints that does not readily peel provides high airtightness and maintains stability.
  · An environmentally friendly powder coating is utilized for superior durability.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  PTM-BB / FTTH BB Plastic Box / Standard

  NITTO KOGYO

  PTM-BB series box is a plastic broadband box for compactly stowing FTTH communications equipment.
  
  [Features]
  · Plastic box exposed communications equipment in existing buildings that does not require embedding.
  · Compact storage of telecommunications equipment, optical connection boxes, HUBs, distributors, and telephone terminals for collective housing buildings or a single unit home.
  ▪ Wiring and communications equipment designed for FTTH applications can be neatly stored.
  ▪ Installation space is compact thanks to a two-unit structure.
  · Exposed model is suitable for existing buildings as there is no need to perform embedding in a wall.
  · An environmentally friendly model that utilizes biomass plastic (polylactic acid) and a styrene-based resin model are available.

  CAD ：

  2D

  Days to Ship:	20 Day(s) or more

• 

  PTM-NL / Plastic Box for Communication, Standard (Lattice-Shaped Body)

  NITTO KOGYO

  PTM-NL series is a standard using styrene series resin.
  
  [Features]
  • Uses a lattice-shaped body for improved equipment mounting and freedom of back surface wiring.
  · Based on wire connection tape securing method, mounting screws are not required and R shaped devices can be flexibly mounted.
  · Wiring work is simplified by the cover being single action attachable/detachable.
  • Suitable for mounting in narrow spaces.
  • Since all cover surfaces, upper and lower, and left and right, install knock-outs for exposed wiring, input and output wires can be installed from any direction.

  CAD ：

  2D

  Days to Ship:	20 Day(s) or more

• 

  RA-Y・RA Series Control Panel Cabinet / Oblong

  NITTO KOGYO

  RA-Y series is a cabinet with a waterproof flat handle and a drainage mechanism as well as waterproof, and dust proof sealing.
  
  [Features]
  · A control panel cabinet with a waterproof flat handle and a drainage mechanism as well as waterproof, and dust proof sealing.
  · The cabinet is short and oblong for use in areas such as the spaces below production lines.
  · The door includes a stay and opens to a 95-degree angle.
  · A locking waterproof flat handle with superior functionality and design characteristics is used (Key No. N200)

  CAD ：

  2D

  Days to Ship:	18 Day(s) or more

• 

  SRM-N / SRM Series Stainless Steel Control Panel Cabinet

  NITTO KOGYO

  SRM-N series is a control panel cabinet that is equipped with a stainless steel window (with waterproof/dustproof sealing) and a rain deflector. SRM-N series control panel enables visual monitoring of equipment, meters, and gauges.
  
  [Features]
  · A control panel cabinet with a stainless steel window with waterproof/dustproof sealing and a rain deflector. Enables visual monitoring of equipment, meters, and gauges. Utilizes a lockable, stainless steel, waterproof flat-handle.
  · The meter panel position is changeable (20 mm pitch in the front/rear depth direction). The meter panel is equipped with a handle for convenient opening and closing.
  · The ground terminal conforms to public building construction standard specifications for ground terminals.

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  SR / Stainless Steel SR Series Control Panel Cabinet (with Water Repelling, Waterproof, Dust Proof Sealing)

  NITTO KOGYO

  SR series is a control panel cabinet with water drainage and waterproof and dustproof sealing. Uses a lockable waterproof flat handle.
  
  [Features]
  · A stainless steel control panel cabinet with water drainage and waterproof and dustproof sealing. Uses a lockable stainless steel, waterproof flat handle.
  · Stainless steel is used as a material.
  · Available with coating (clear coating) and without coating.

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  CHB-A・CH Series Box (with Dust Proof Sealing)

  NITTO KOGYO

  CHB-A series has been designed for ease of use, with improved workability and a wide range of variations.

  CAD ：

  2D

  Days to Ship:	14 Day(s) or more

• 

  CN Box (Dust Proof and Waterproof Design), International Standard Certified

  NITTO KOGYO

  Screw-on model highly sealed cabinet.
  
  [Features]
  · Use of galvanized steel plate boards makes equipotential bonding connection easy because continuity can be ensured through contact with the installed devices.
  · The iron sheet uses a structure that is electrically connected to the body.
  • Not processed for screws on the main body so it has high IP66 sealing performance.
  · With rear mounting holes.
  · The door is fastened by screws on one side and hinged on the other side.
  · The door set screws are arranged in the corners, giving the door a wide range of use.
  · Clean design where screw heads do not protrude from door surface.
  · The door set screws prevent falling.
  · Use of urethane foam sealing with no joints and that does not readily peel provides high airtightness and maintains stability.
  • Masked packing enables repainting without needing to peel off the paint.
  · The paint uses a powder coating with superior durability that is easy on the environment.

  CAD ：

  2D

  Days to Ship:	10 Day(s) or more

Loading...