Mounting Brackets（Type：Bar）

• 

  Protective cover stay　S19【10 Pieces Per Package】

  KAMEDA DENKI

  A support tool to attach DIN rail relay and other protective terminal covers.
  
  [Features]
  ・Jointly fasten terminal block stopping tools to more easily attach protective covers.
  ・Please use the stopping tool for each terminal block market product.
  ・Two varieties: 20 mm and 35 mm height.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Unit Panel Mounting Bar, UTB Series

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · Use when installing a unit panel on a rear surface

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  BP24 / Board Wire-Secured Bar【10 Pieces Per Package】

  NITTO KOGYO

  Use the BP24 series for wiring adjustment and collection.
  
  [Features]
  · Use for wiring adjustment and collection.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Stat Bar

  MIRAI INDUSTRY

  [Features]
  · Boxes can be easily mounted using a wall face or slab reinforcement, preventing tilting and anchoring the box in place (box can be anchored in a straight orientation).
  · The bar is a freely bendable φ4 mm iron wire, so the height of the box can be freely adjusted based on the thickness of the wall.

  Days to Ship:	8 Day(s) or more

• 

  New Stud Bar (Lean Prevention Bar), OF Series

  MIRAI INDUSTRY

  [Features]
  · A connector can be mounted to the knockouts on the back of the box.
  · Lean prevention bar is available in φ4-mm and easy-to-bend φ 3-mm types (excluding notched and adhesive types).
  · A glued (with adhesive) type is a type where an adhesive is melted using a torch, etc. and then affixed to a box.
  · Types with knockouts (without 9.5-mm stud) can be mounted even for boxes with heat insulating covers or boxes with heat insulating sheets attached (those with knockouts on the back cannot be used).

  Days to Ship:	8 Day(s) or more

• 

  New Stud Bar (with knock)

  MIRAI INDUSTRY

  [Features]
  · A connector can be mounted to the knockouts on the back of the box.
  · Lean prevention bar comes in 4 mm and easy-to-bend 3 mm diameter types (excluding notched and adhesive types).
  · A glued (with adhesive) type is a type where an adhesive is melted using a torch, etc. and then affixed to a box.
  · Types with knockouts (no 3 minute start) can be mounted even for boxes with heat-insulating covers or boxes with heat-insulating sheets attached (those with knockouts on back cannot be used).

  Days to Ship:	16 Day(s) or more

Loading...