Mounting Brackets（Page2）

• 

  OFL Series, External Installation Foot【4 Pieces Per Package】

  TAKACHI ELECTRONICS ENCLOSURE

  OPCMOPCP/OABP/RPCP/WPCP/WABP Dedicated External Mounting Foot
  
  [Features]
  · Attached using the included screws after first inserting into the holes on the bottom

  CAD ：

  2D

  Days to Ship:	Same day

• 

  Hinge, OHI Series【2 Pieces Per Package】

  TAKACHI ELECTRONICS ENCLOSURE

  Hinge (OHI)
  
  [Features]
  - Mounting template with screws included

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Chassis Mounting Bracket, UCK-P Series【4 Pieces Per Package】

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · Chassis mounting bracket (UCK-P) for UC/UCN/UCY.

  CAD ：

  2D

  Days to Ship:	Same day or more

• 

  External Mounting Feet, HQF Series【4 Pieces Per Package】

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  - External mounting feet for HQ.

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  SSK Series, Pole Mounting Fixtures【2-4 Pieces Per Package】

  TAKACHI ELECTRONICS ENCLOSURE

  Stainless steel mounting fixtures for poles and telephone poles.
  [Features]
  · When mounting, a PKB Series Securing Belt (sold separately) is required.
  [Applications]
  · Mounting is possible without drilling holes in the box.

  CAD ：

  2D

  Days to Ship:	Same day or more

• 

  Unit Panel Mounting Bar, UTB Series

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · Use when installing a unit panel on a rear surface

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  BFL Type External Plastic Mounting Stand【4 Pieces Per Package】

  TAKACHI ELECTRONICS ENCLOSURE

  The product has an added gray color to match the color of the BCPC/BCPK/BCPR series.
  
  [Features]
  · Optional part.
  ▪ This is a plastic mounting stand that looks like a box.
  ▪ The product is strong as it is made from glass fiber-reinforced polycarbonate

  CAD ：

  2D

  Days to Ship:	Same day or more

• 

  External Mounting Feet, CKF Series【4 Pieces Per Package】

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · These are plastic external mounting feet. *Please note that mounting screws must be purchased separately.

  CAD ：

  2D

  Days to Ship:	17 Day(s) or more

• 

  Chassis Fixing Bracket, FCK Series【10 Pieces Per Package】

  TAKACHI ELECTRONICS ENCLOSURE

  Chassis Anchoring Bracket (FCK Series)
  
  [Features]
  · To be used for mounting DIN rails, etc. (other than those for dedicated chassis).
  · In the FCK-1, the chassis is 13 mm from the panel, and 23 mm in the FCK-2.

  CAD ：

  2D

  Days to Ship:	Same day or more

• 

  Mounting Boss, T-600 Series【10 Pieces Per Package】

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  - Mounting Boss (T-600)

  CAD ：

  2D

  Days to Ship:	Same day

• 

  Mounting Boss, T-700 Series【10 Pieces Per Package】

  TAKACHI ELECTRONICS ENCLOSURE

  Mounting Boss (T-700)
  
  [Features]
  - Because it is affixed by double-sided tape, it can be easily mounted to cases and boxes, allowing circuit boards and chassis to be mounted to cases and boxes with no boss.

  CAD ：

  2D

  Days to Ship:	Same day

• 

  Panel Vibration Stopping Bracket, UCF Series【2 Pieces Per Package】

  TAKACHI ELECTRONICS ENCLOSURE

  Panel Vibration Prevention Bracket (UCF) for UC, UCN, and UCY
  
  [Features]
  · To be used for suppressing vibration of the front and back panels of a case.
  · Can be used in combination with a chassis mounting bracket.

  CAD ：

  2D

  Days to Ship:	Same day

• 

  BP17-SK / Spacer for Wall Mounting【10 Pieces Per Package】

  NITTO KOGYO

  [Features]
  - Use as a spacer for the back surfaces of wall-mounted cabinets.
  - The product's shape helps prevent falls when inserting back surfaces.

  CAD ：

  2D

  Days to Ship:	20 Day(s) or more

• 

  Parts Mounting Parts-Less Lock OL Series【1-500 Pieces Per Package】

  OHM ELECTRIC

  Simple mounting that does not require a lot of space. Part mounting is possible even in locations where door and other drilling taps, or welding processes, cannot be performed.
  
  [Features]
  ・Parts mounting is possible even in locations where door and other drilling taps, or welding processes, cannot be performed.
  ・OL-A, B type is fixed by adhesive.
  ・Simple usage can be performed.
  ・The OL-E type can be used as a 20 mm high spacer.
  ・Boosts the insulation and quake resistance of mounted parts.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  CSX-H Hinge【2 Pieces Per Package】

  NITTO KOGYO

  CSX-H series is used for aluminum box options CSE and CSH.

  CAD ：

  2D

  Days to Ship:	10 Day(s) or more

• 

  PA / L-Shaped Mounting Bracket Set【20 Pieces Per Package】

  NITTO KOGYO

  PA-1 series is an optional L-shaped mounting bracket set for pull boxes which conforms to public building construction standard specifications.

  CAD ：

  2D

  Days to Ship:	18 Day(s) or more

• 

  BP24-T / Wire Fastener

  NITTO KOGYO

  Cable Lacing Bar
  [Features]
  ・ Materials: Steel
  ・ Plate thickness: 1.6 mm
  ・ Coating color: Cream-colored paint (2.5Y9/1)

  CAD ：

  2D

  Days to Ship:	10 Day(s) or more

• 

  BP24 / Board Wire-Secured Bar【10 Pieces Per Package】

  NITTO KOGYO

  Use the BP24 series for wiring adjustment and collection.
  
  [Features]
  · Use for wiring adjustment and collection.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  RUX-M・RUL Series Optional Mount Bracket for Cabinets

  NITTO KOGYO

  RUX-M series is an optional component for the RUL.
  
  [Features]
  · Use for mounting to cabinets and walls.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  BP16-LA, L-Shaped Fixture

  NITTO KOGYO

  BP16-LA series can be used as a safeguard against tipping.
  
  [Features]
  · Used as a safeguard against tipping.
  · Can be fixed to cabinet ceilings and board mounts.
  · Holes included for installation with M12 bolts.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  CX-M / Mounting Bracket

  NITTO KOGYO

  Please use the CX-M series for mounting of cabinets or wall mounting.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  PTMX L-Shaped Outlet Mounting Bracket

  NITTO KOGYO

  [Features]
  • You can use the PTMX series with a deep AC adapter mounted sideways.

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  BP21 Panel Rail (2) (for Body)

  NITTO KOGYO

  Use the BP21-B series with the base cabinet, RA, OR, SR, and the like as a body.
  
  [Features]
  • Use with the base cabinet, RA, OR, SR, and the like.

  CAD ：

  2D

  Days to Ship:	10 Day(s) or more

• 

  EX-HR / Door Wiring Support Rail

  NITTO KOGYO

  EX-HR series can be effectively used for installing lightweight equipment or wiring.
  
  [Features]
  - Can be used for laying out equipment mounted to the back faces of doors or wire routing.
  - Can be used for mounting of relatively lightweight components between panel rails or for wire routing.

  CAD ：

  2D

  Days to Ship:	18 Day(s) or more

• 

  FX Pipe Attachment Tool with Zinc Plating【10 Pieces Per Package】

  NITTO KOGYO

  [Features]
  • Use the FX series when installing pipes for temporary construction, and the like.

  CAD ：

  2D

  Days to Ship:	9 Day(s) or more

• 

  Terminal Block Accessory, Rail Support【1-10 Pieces Per Package】

  PATLITE (KASUGA)

  [Features]
  · Simplifies wiring by lifting the rail and changing the mounting angle.
  · Enables the mounting of terminal blocks to corners of boards and inside confined mounting spaces.

  Days to Ship:	9 Day(s) or more

• 

  Resin Control Box Mounting Tool

  IDEC

  (Accessory) Mounting tool
  
  [Features]
  • A mounting tool for the IP65 control box made with lightweight resin and a protective construction.

  Days to Ship:	9 Day(s) or more

• 

  SFL Series, External Installation Foot【4 Pieces Per Package】

  TAKACHI ELECTRONICS ENCLOSURE

  Main body mounting accessories

  CAD ：

  2D

  Days to Ship:	17 Day(s) or more

• 

  AD BDN Type Accessories: External Mounting Feet【2-4 Pieces Per Package】

  TAKACHI ELECTRONICS ENCLOSURE

  Dedicated external mounting feet for the AD and BDN type.

  CAD ：

  2D

  Days to Ship:	Same day or more

• 

  FCC-K Model Chassis Reinforcement Fixture【2 Pieces Per Package】

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · Used as a reinforcing fixture for the central part of the chassis when placing a load on the chassis.
  · Boring holes (2-φ3.5) into the chassis and panel side is necessary when mounting to a chassis.
  · The positioning can be adjusted as required by changing the hole boring position.
  · If the chassis mounting fitting FCK-1 is used, please use the FCC-K-1 fixture.
  · If the chassis mounting fitting FCK-2 is used, please use the FCC-K-2 fixture.

  Days to Ship:	9 Day(s) or more

• 

  Stat Bar

  MIRAI INDUSTRY

  [Features]
  · Boxes can be easily mounted using a wall face or slab reinforcement, preventing tilting and anchoring the box in place (box can be anchored in a straight orientation).
  · The bar is a freely bendable φ4 mm iron wire, so the height of the box can be freely adjusted based on the thickness of the wall.

  Days to Ship:	8 Day(s) or more

• 

  New Stud Bar (Lean Prevention Bar), OF Series

  MIRAI INDUSTRY

  [Features]
  · A connector can be mounted to the knockouts on the back of the box.
  · Lean prevention bar is available in φ4-mm and easy-to-bend φ 3-mm types (excluding notched and adhesive types).
  · A glued (with adhesive) type is a type where an adhesive is melted using a torch, etc. and then affixed to a box.
  · Types with knockouts (without 9.5-mm stud) can be mounted even for boxes with heat insulating covers or boxes with heat insulating sheets attached (those with knockouts on the back cannot be used).

  Days to Ship:	8 Day(s) or more

• 

  New Stud Bar (with knock)

  MIRAI INDUSTRY

  [Features]
  · A connector can be mounted to the knockouts on the back of the box.
  · Lean prevention bar comes in 4 mm and easy-to-bend 3 mm diameter types (excluding notched and adhesive types).
  · A glued (with adhesive) type is a type where an adhesive is melted using a torch, etc. and then affixed to a box.
  · Types with knockouts (no 3 minute start) can be mounted even for boxes with heat-insulating covers or boxes with heat-insulating sheets attached (those with knockouts on back cannot be used).

  Days to Ship:	16 Day(s) or more

• 

  Fixing Holder for THB387, 391, 390, 400, 401L, 402T, and 399Y

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  ・Optional part that allows panels, poles, and more to be mounted.
  ・Please use when securing relay connectors.

  CAD ：

  2D

  Days to Ship:	Same day

• 

  GZBC Series Battery Fittings

  SETTSUMETAL

  [Features]
  · Attachable metal fittings for use with batteries in a compatible plastic case.
  · The negative side is a spring, making it easy to distinguish between positive and negative.
  · Fit-in type makes mounting easy.

  Days to Ship:	16 Day(s) or more

• 

  ABC Parts (TCK)

  SHINOHARA ELECTRIC

  ● Applications:
  
  Use for 48 square DIN standard device mounting.

  Days to Ship:	9 Day(s) or more

• 

  ABC Part (TK)

  SHINOHARA ELECTRIC

  ● Applications:
  
  For use as the installation bracket for knobs or toggle switches on distribution boards, control panels or operating panels.

  Days to Ship:	16 Day(s) or more

• 

  ABC Part (Button / Switch Mounting Bracket) (PBK)

  SHINOHARA ELECTRIC

  ● Applications:
  
  For use as a push-button switch mounting fixture.

  Days to Ship:	Same day or more

• 

  ABC Parts (VTK)【1-50 Pieces Per Package】

  SHINOHARA ELECTRIC

  ● Applications:
  
  For use as the installation base for knobs or toggle switches.

  Days to Ship:	10 Day(s) or more

• 

  ABC Parts (Auxiliary Bracket)【1-100 Pieces Per Package】

  SHINOHARA ELECTRIC

  ● Applications:
  
  Use together with ABC channel. Use as an auxiliary mounting fitting for equipment, wiring ducts, and terminal blocks, etc.

  Days to Ship:	Same day or more

• 

  Wall Bracket For AE/KL

  RITTAL

  [Product specifications]
  · Materials: steel
  · Surface treatment: zinc plating
  [Applications]
  · Model number 21503010: for AE/KL
  · Model number 21508010: for AE/KL
  · Model number 21508100: for AE

  Days to Ship:	10 Day(s) or more

• 

  ABC Parts (Button / Switch Mounting Bracket), TCKH Series【50 Pieces Per Package】

  SHINOHARA ELECTRIC

  [Features]
  ·Since it can be opened and closed with a hinge, it is easy to connect or wire terminals on the back side and visually check during wiring inspection, etc.
  ·Since the hinge is a torque hinge, it can be stopped and worked at any opening position
  ·After installation, you can also use screws to secure the opening and closing (M4 screws are not included)
  [Materials]
  ·Steel plate, electrogalvanized trivalent chromate treatment finish (Environmentally friendly electrogalvanized trivalent chromate treatment finish product)

  Days to Ship:	10 Day(s) or more

Loading...