Louvers

• 

  LP / Louver【2 Pieces Per Package】

  NITTO KOGYO

  LP series louver is easy to install and can be used for ventilation of internal panelboards.
  
  [Features]
  · Easy to install and can be used for ventilation of internal panelboards.
  · Effective internal panelboard ventilation is achieved via natural air circulation.
  · Includes stainless steel insect screen.
  · Washable, reusable filter (LP-F)

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	Same day or more

• 

  [RD43] filter cassette

  NITTO KOGYO

  For natural board ventilation. Rinse out the filter for re-use.
  
  [Specifications]
  ·Filter: Made of polyester, 12 mm thick, removes 80% of dust
  ·Paint Color:
  Light beige paint LB (5Y7/1), JPMA J25-70B
  Cream paint, cream (2.5Y9/1), JPMA J22-90B
  ·Installation location: For indoors IP4X
  [Accessories]
  ·Mounting screws

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  RD44 / Filter Cassette with Ventilation Fan

  NITTO KOGYO

  Use the RD44 series for adjusting the temperature of control equipment.
  
  [Features]
  · Forced in-panel ventilation.
  · Comes with a reusable filter (made of 12-ply polyester, with a dust removal efficiency of 80%)

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  Steel Louver【2 Pieces Per Package】

  MISUMI

  [Features]This is a low-cost steel louver (2 pcs. included). It is easy to attach because it is a bolt-on attachment type. It can be attached even after the housing such as the control panel is complete. You can choose from 3 colors. [Applications]Perfect for indoor use.

  • Volume Discount

  • Steel

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Steel / Stainless Steel Louver (Small)【2 Pieces Per Package】

  MISUMI

  [Features]A compact type louver made of steel / stainless steel (2 pcs. included). A 12 cm fan can be installed. Ideal for ventilation for control panels, etc. Stainless steel type added (2 types of surface treatment: brushed and mirror finish) [Applications] Ideal for indoor use.

  • Volume Discount

  • Steel
  • Stainless Steel

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Round Louver (Resin)

  MISUMI

  [Features]A round louver with a resin filter. Equipped with a stainless steel insect-proof mesh. It can be easily attached by machining a round hole on the box. The filter can be replaced from the outside and can be washed for reuse.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	Same day or more

• 

  Square Louver (Resin)

  MISUMI

  [Features]A square louver with resin filter. Equipped with a stainless steel insect-proof mesh. It can be easily attached by machining a round hole on the box. The filter can be replaced from the outside and can be washed for reuse.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	Same day or more

• 

  Gallery with Hood (for outdoor use: FG type), IPX4

  SHINOHARA ELECTRIC

  The hood helps it deal with wind and rain.
  
  [Features]
  - The hood mounted to the gallery provides wind and rain protection.
  - Simple installation.
  - Mount by snapping into the panel holes and screwing in the retention frame (retention board) from the underside.
  - Accessories like a blow prevention cover, insect screen and anti-dust filter provide the features needed for your applications.
  - (FG-15, FG-20 only.)
  - Can be included in a set with a salt filter.

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  Small Ventilation Louver (For Indoor Use)

  SHINOHARA ELECTRIC

  Used for ventilation of indoor control panels, panel boards, etc.
  
  [Features]
  · Can be installed directly on panels as before, with no hole drilling required.
  · Ventilation galleries can be installed afterward, reducing workload.
  · A 120mm square fan can also be installed (SG1-10-4)

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  Ventilation Louver, for Outdoor Use

  KAMEDA DENKI

  Vent for switchboards, control panels, and cubicles. For outdoor use.
  
  [Features]
  · Insertable for simple installation.
  · A ventilation louver is inserted into the notch of the panel and a retention frame is mounted to the back using screws.
  · The rear hood is integrated with the mounting frame, so mounting is simple.
  · Insect screen and dustproof filter can be easily attached by a single knurled nut that has been newly developed, so maintenance and replacement are easy to perform.
  · Large opening area providing a beautiful finish.

  Days to Ship:	14 Day(s) or more

• 

  Louver V Series with Hood

  TAKACHI ELECTRONICS ENCLOSURE

  Louver (V) with hood
  
  [Features]
  · Optional part for box ventilation.
  - ABS types (V60, V80) compatible with BCAP and BCAK as well as polycarbonate types (V60S, V80S) compatible with BCPC and BCPK available.
  - Suitable for use with large boxes such as control panels.

  CAD ：

  2D

  Days to Ship:	Same day

• 

  WLP / Round Waterproof Louver【2 Pieces Per Package】

  NITTO KOGYO

  [Features]
  • WLP series is an outdoor cabinet with a usable high IP plastic louver.
  · Mounts to cabinet just by drilling a round hole.
  · Includes stainless steel insect screen.
  • The louver is removable so the filter can be replaced from outside.
  • Panel ventilation can be mounted later.

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  Control Panel Filter【1-2 Pieces Per Package】

  MISUMI

  Dirt in filter is obvious. Significantly reduces the time and effort needed for filter replacement

  • Volume Discount

  Days to Ship:	16 Day(s) or more

• 

  Free Aluminum Gallery (FAG Type) 1P × 2

  SHINOHARA ELECTRIC

  This aluminum ventilation gallery is designed to enable ventilation of cubicles, switchboards, etc.
  
  [Features]
  - Extra-long galleries can be produced to the customer's specifications.
  - It is not necessary to directly drill conventional ventilation holes into the panel.
  - This free aluminum gallery can be mounted from the rear as a separate component.
  - Ventilation efficiency is high without sacrificing opacity.
  - Light with no risk of rusting.

  Days to Ship:	11 Day(s) or more

• 

  Ventilation Gallery (Anti-Salt Damage Specification) IP4X

  SHINOHARA ELECTRIC

  Use as a ventilation component of a switchboard installed in IP4X coastal areas, etc.

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  Jet-Flow Proof Ventilation Gallery (for dealing with salt damage) IP55

  SHINOHARA ELECTRIC

  A ventilation component for a switchboard installed in IP55 coastal areas.
  
  [Features]
  - Low pressure loss (approximately half that of conventional products).
  - Efficiently collects sea salt particles.
  - Long lifespan (more than twice that of conventional products).
  - Even if collected sea salt particles deliquesce from the filter, the pressure loss increases only a little.
  - Deliquesced sea salt particles flow out downstream, ensuring minimal re-entrainment.
  - Superior impact resistance.

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  Jet Proof Type Louver (Resin Cover Type) IP45

  SHINOHARA ELECTRIC

  For ventilating cubicles and switchboards installed in harsh outdoor conditions. The protective plastic cover keeps the unit lightweight.
  
  [Features]
  - The plastic-resin rear anti-pull-in cover reduces weight and improves workability.
  - No paint required for the anti-pull-in cover, reducing costs.
  - Strong waterproofing that can pass JISC4620/JISC0920 anti-water jet testing (IP45).

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  In-Wing Ventilation Gallery (Anti-Water Jet Type), IP45

  SHINOHARA ELECTRIC

  Use for ventilating operation boards, control panels, and cubicles. Large opening size.
  
  [Features]
  · Can secure an opening area of 148 cm2 using outdoor specifications for attaching blow prevention covers.
  · Significant labor savings are possible because, just as in the past, there is no need to put a vent in the panel.
  · Also, a breathing hole can easily be added.
  · Combines the rear gallery with anti-blow-in cover for strong waterproofing that can pass JISC4620/JISC0920 (anti-water jet) testing (IP45).
  · Stainless steel type also available (built to order)

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  Gallery with Fan (stainless steel) IP45

  SHINOHARA ELECTRIC

  Gallery with fan that is usable outdoors.
  
  [Features]
  · Has a water repellent filter for a structure with superior waterproofing.
  · Can be mounted to panels with simple hexagonal machining.
  · Set includes fan finger guard and power supply cord.
  · Filter can be washed and reused.
  · Available in beige 5Y7/1 and cream 2.5Y9/1 colors.

  Days to Ship:	16 Day(s) or more

• 

  Plastic Gallery, PC Series

  SHINOHARA ELECTRIC

  Plastic galleries for control panels and instrument panels. The filter can be replaced from the front panel. (Plastic)
  
  [Features]
  · The task of installing has been streamlined by a simple one-touch mounting to the panel apertures.
  · The superior aesthetic appearance can enhance the commercial value of panels by sequential vertical/horizontal mounting.
  · The filter can be replaced by simply removing the front panel of the gallery.
  · 4.90 sq.mm, 120 sq.mm, and 160 sq.mm fans can be mounted.

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  Blow-in Prevention Gallery, IP45

  SHINOHARA ELECTRIC

  Use the blow-in prevention gallery as a ventilation part for cubicles and switchboards in harsh outdoor conditions.
  
  [Features]
  - No ventilation holes need to be cut in large panels.
  - Retrofit this component on installed ventilation galleries.
  - The ventilation gallery and blow-in prevention cover are a single part, making it waterproof up to the JIS C 4602/JIS C 0920 standards (blow-in prevention tests).
  - Stainless steel ventilation galleries also available.

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  RSLP-K / R Louver with Ventilation Fan, with Filter

  NITTO KOGYO

  [Features]
  · The RSLP-K series is a single-action-attachable ventilation fan louver featuring an excellent design.
  · Provides superior forced in-panel ventilation. Use with an R louver as a set is recommended.
  · Tools are not required to replace the filter.
  · Can be easily separated and disassembled for recycling purposes.

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  GLP / Square Frame Round Louver【2 Pieces Per Package】

  NITTO KOGYO

  GLP series can be mounted onto a cabinet by simply drilling a round hole.
  
  [Features]
  · Can be mounted onto a cabinet just by forming of a round hole.
  · Includes a stainless steel insect screen.
  · Removable cover allows for filters to be swapped from the outside (GLP-F).
  · Filter can be re-used after washing it with water (GLP-F).

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  OLP / Louver with Hood【2 Pieces Per Package】

  NITTO KOGYO

  OLP series louver (LP) is equipped with a hood.
  
  [Features]
  · A louver (LP) equipped with a hood.
  · Includes stainless steel insect screen.
  · The filter is washable and can be reused (OLP-F).

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  RSLP・R Series Louver with Filter【2 Pieces Per Package】

  NITTO KOGYO

  RSLP series is a single-action rail mount featuring a superior design.
  
  [Features]
  · One-touch rail mount with superior design.
  · Tools not required to replace filter.
  · Can be easily separated and disassembled for recycling purposes.
  · Superior ventilation effect is achieved by using an R series louver with a ventilation fan.

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  SLP / Square Louver【2 Pieces Per Package】

  NITTO KOGYO

  SLP series has a stainless steel insect screen.
  
  [Features]
  · Includes stainless steel insect screen.
  ·The filter can be re-used by washing with water.
  · A panel ventilation fan can be attached (excluding SLP-2, 2C)

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  EFC, Salt Filter Case, Filter

  NITTO KOGYO

  [Application]Please use it as a replacement filter case for a salt damage. [Compatible Models]EFC-12 "Replacement cycle (as a guide)" approx. 1 year (The cycle of filter replacement varies depending on the operating environment.)

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Louver Option, Filter【2-10 Pieces Per Package】

  NITTO KOGYO

  LP-F series can be used as a louver exchange filter.
  
  [Features]
  • Use as a louver exchange filter.

  CAD ：

  2D

  Days to Ship:	10 Day(s) or more

• 

  SLP / Large Louver

  NITTO KOGYO

  [Features]
  · The SLP-25 series is a large louver for large cabinets.
  · Tools are not required to replace the filter.
  · Superior ventilation is achieved using an R series louver with a ventilation fan.

  CAD ：

  2D

  Days to Ship:	8 Day(s) or more

• 

  Louver with U-Shaped Hood

  JAPPY

  This is a louver which includes a U-shaped hood which prevents the entry of rain water.
  
  [Features]
  · A stainless steel outer wall vent for supplying natural ventilation.
  · There are 2 types of designs, one with a round hood and one with a U-shaped hood.
  · Different models with or without an insect screen and water guard can be selected based on the intended application.
  · Material properties include the use of highly corrosion-resistant SUS 304.

  Days to Ship:	16 Day(s) or more

• 

  [RSLP-ES] - Electromagnetic Shielded (EMC) Model R - Louver

  NITTO KOGYO

  This louver is designed to have natural ventilation and an effective shield.
  
  [Features]
  ▪ This louver is designed to have natural ventilation and an effective shield.
  · Tools not required to replace filter.
  · It can be easily separated and disassembled for recycling.

  CAD ：

  2D

  Days to Ship:	10 Day(s) or more

• 

  [RSLP-KES] electromagnetic shield (EMC) specification round louver with exhaust fan

  NITTO KOGYO

  [Features]
  ·Design louver with exhaust fan with powerful ventilation and excellent shield effect.
  ·No tools are required to replace the filter.
  ·Easily dismantles and decomposes for excellent recyclability.

  CAD ：

  2D

  Days to Ship:	10 Day(s) or more

• 

  [SLP-ES] Electromagnetic Shield (EMC) Large Louver

  NITTO KOGYO

  This large louver has natural ventilation and an effective shield.
  
  [Features]
  ▪ This large louver has natural ventilation and an effective shield.
  · Tools not required to replace filter.

  CAD ：

  2D

  Days to Ship:	10 Day(s) or more

• 

  Ventilation Louver (Made Of Steel Plate & Stainless Steel)

  SHINOHARA ELECTRIC

  Use as a component for ventilation systems found on operation/control panels, switchboards, cubicles etc.
  
  [Features]
  · Using a ventilation louver means that there is no need to punch ventilation holes in panels as before, thereby helping make much more efficient use of space.
  Extremely easy to mount. Simply insert the ventilation louver from the front into the panel holes and then screw in the holding frame from the back.
  Available in different specifications for use in different applications. Select one or more accessories (blow-in protection cover, insect screen, dustproof filter etc.) depending on the intended application.
  Use the blow-in protection cover (structured so that blown-in rainwater flows back out) for outdoor use (IPX2).

  CAD ：

  2D

  Days to Ship:	11 Day(s) or more

• 

  Control Board Filter Economy type

  HASHIMOTO CLOTH

  Days to Ship:	12 Day(s)

Loading...