Testers

• 

  FLUKE Digital Multimeter

  FLUKE

  Multimeter for performing various electrical and electronic testing
  
  [Features]
  · For 100Vac line use.
  · General-purpose, compact

  Days to Ship:	Quote

• 

  Digital Multi Meter CD770

  SANWA ELE INST

  Multiple functions at a good price
  
  [Features]
  · 4,000 count.
  · 0.5% full accuracy.
  · Double-molded thermoplastic elastomer exterior boasts high resistance against drop shock.
  · Easy-to-read large LCD.
  · Current measuring terminal with safety cap configured separately.
  · Data hold, range hold, relative function.
  · Auto power off function after approximately 30 minutes (can be canceled).
  · Frequency measurement (zero cross signal, input resistance approximately 2 kΩ).
  · Condenser capacity measurement (not possible when there is large leakage current).

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Analog multi-tester SP-18D

  SANWA ELE INST

  Non-removable test lead type with red LED check function
  
  [Features]
  · An integrated case type, ideal for carrying and stowing away.
  · Resistance up to 200MΩ can be measured at low voltages (3 V).
  · 0.01μF to 1,000μF condenser capacity measurement.
  · Resistance measurement by LED check with 3 V terminal voltage.
  · Battery check.
  · Dual function panel screen protective cover that converts to a stand.

  • STOCK

  Days to Ship:	16 Day(s)

• 

  Digital Multi Meter RD700

  SANWA ELE INST

  Multi-functional, measures up to +AC/DC1000V/10A. 1000M Ω high input impedance.
  
  [Features]
  · 4,000 count.
  · 0.3% full accuracy.
  · Condenser capacity measurement. Note: Not suitable for measurement of condensers with large leakage current.
  · Temperature measurement (K type temperature sensor). Note: K-AD accessory required, sold separately. Note: K type temperature sensor K-250PC included.
  · Frequency measurement: Input voltage 20VACrms or less. Input signal: Sine wave or square wave with 40% to 70% duty ratio. Input sensitivity 10Hz to 20kHz: 0.9Vrms and above, 20kHz to 500kHz: 2.6Vp or 1.9Vrms and above, 500kHz to 1MHz: 4.2Vp or 3Vrms and above.
  · ADP (current sensor) dedicated function.
  · MAX recording measurement.
  · Data hold/range hold.
  · Relative value measurement.
  · Auto power off (after approximately 30 minutes) can be canceled.
  · Alarm for when test lead is improperly inserted into the current terminal.
  · Protective holster with wall hanger and test lead holder.
  · Tilt stand.

  • STOCK

  Days to Ship:	16 Day(s)

• 

  LAN Cable HiTester 3665

  HIOKI

  Wire map with direction check function to identify each cable.
  [Features]
  ・ For wiring confirmation after installation and for disconnection position identification. You can tell at a glance whether the measurement result is OK or NG
  ・ Direction. For checking the connection destination of multiple cables. Can identify up to 21 cables
  ・ Measures the length of the cable. You can also check the disconnection / short circuit position
  ・ Japanese display
  [Applications]
  ・ Used for confirmation after LAN wiring work

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Tester

  KYORITSU

  Compact and easy-to-use tester

  Days to Ship:	1 Day(s)

• 

  Card size Digital Multimeter

  HIOKI

  • STOCK

  Days to Ship:	1 Day(s)

• 

  Pocket type Digital Multimeter

  MULTIMEASURING

  Days to Ship:	1 Day(s)

Loading...