Square Connectors

• • On Sale Till 30/06/2024

  

  D-Sub Connectors - XM2/XM3

  OMRON

  These D-sub connectors are ideal for use with OA equipment interfaces.
  [Features]
  · Shielded connector for use in EMI countermeasures.
  · The metalized plastic hood (Model XM2S) provides excellent noise protection.
  · Multi-hole ferrite core equipped types (Model XM3B-F) are also available.
  · Offers a space-saving design and superior noise protection at high frequencies.
  · A wide variety of mounting brackets and grounding fixtures are available.
  · Conforms to UL standards (File No. E103202) as standard (excluding the Model XM2S and some other products.)
  [Applications]
  · Small and tough-wearing structure with a metal shell

  • Volume Discount

  	Special Price
  Days to Ship:	Same day or more

• 

  Dedicated PLC D-Sub Connector with Resin Hood

  MISUMI

  Omron D-sub Hood Recommended By Mitsubishi Q Series

  • Volume Discount

  • PLC
  • EMI Countermeasure

  Days to Ship:	16 Day(s) or more

• 

  HIF3B Series MIL Standard-Compliant Ribbon Cable Connector【1-100 Pieces Per Package】

  HIROSE ELECTRIC

  MIL standard-compliant rectangular ribbon cable connector.
  [Features]
  · HIF3B series products are developed to comply with the MIL standard and can be used in a wide range of applications.
  · Compatible with HIF3 series.
  · HIF3B series products are UL-listed connectors.
  · Features a mechanism to prevent mis-insertion.
  · A form in which inserting the guide key (polarity key) on the pin header side creates a convex section that fits into the concave section (polarity keyway) of the socket. (MIL standard)
  · A form in which the mis-insertion prevention guide (polarity guide) on the socket side fits into the slot (polarity slot) on the pin header side.
  · A system that embeds the polarizing key in the socket hole and guides it.
  · A guide system in which the convex section on the socket side (HIF3A type) combines with the slot located in the center of the pin header side.
  · The compatible wire (UL2651) is an AWG#28 ribbon cable (7-core/0.127 mm, jacket diameter of 0.9 ± 0.2 mm).
  [Applications]
  · A wide variety of models are available, enabling use with a wide range of equipment.

  • Volume Discount

  Days to Ship:	9 Day(s) or more

• 

  3M Japan Limited IEEE1284 Half-Pitch Connector, EMI Shielding General-Purpose Plastic Hood

  MISUMI

  IEEE1284 Solder / Pressure Model Hood

  • Volume Discount

  • EMI Countermeasure
  • Screw Lock
  • One-Touch Lock

  Days to Ship:	16 Day(s) or more

• 

  Convertible Male/Female D-Sub Connector

  MISUMI

  [Features]An adapter that converts the male/female D-sub connector or extends the harness. Existing wiring can be effectively used for extension.

  • Volume Discount

  • Relay
  • For Signal
  • Screw Lock

  CAD ：

  2D

  Days to Ship:	Same day or more

• 

  Centronics Press-fit Spring-lock Connector (Male)

  MISUMI

  Labor-saving Pressure Welding Spring-lock Male Connector

  • Volume Discount

  • For Signal
  • Connection in Boards
  • Printer
  • Pressure Welding
  • Gold Plated

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Solder and Press Contact PLC D-Sub Connector

  MISUMI

  Used with Mitsubishi Electric Q series which is highly trusted in Japan

  • Volume Discount

  • For Signal
  • Connection between Boards
  • PLC
  • EMI Countermeasure
  • RS422
  • Solder
  • Gold Plated
  • Screw Lock

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Centronics Solder Spring-lock Connector (Male)

  MISUMI

  [Features]A Centronics male connector with a lineup of low-priced products. This is a connector that is used for connecting to a panel by attaching cable with solder.

  • Volume Discount

  • For Signal
  • Connection between Boards
  • Printer
  • Solder

  CAD ：

  2D

  Days to Ship:	Same day or more

• 

  Centronics Press-fit Spring-lock Connector (Female)

  MISUMI

  Labor-saving Pressure Welding Spring-lock Male Connector

  • Volume Discount

  • For Signal
  • Connection in Boards
  • Printer
  • Pressure Welding
  • Gold Plated

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  PCR Series

  HONDA TSUSHIN KOGYO

  1.27 mm pitch high density rectangular connector.
  [Features]
  ·Robust and ideal for interfaces due to the metal shell and metal case.
  ·There is a wide range of contact numbers, 20 to 96 contacts for board-to-cable connection and 20 to 128 contacts for board-to-board connection.
  ·The housing guide mechanism allows parallel mating and prevents short circuits between adjacent contacts.
  ·For FCC and other EMI countermeasures.
  ·Live line connection (3 steps) is also available.
  ·Ideal for horizontal, parallel and vertical connections.
  ·Rated Voltage: 250 V AC (r.m.s.), rated current: 1 A / pin, contact resistance: 35 mΩ or less.
  [Applications]
  ·Can be used for office equipment, factory automation equipment, measuring instruments, communication equipment, and various compact equipment.

  Days to Ship:	16 Day(s) or more

• 

  Han E / EE Series Connector (Screw Type / Crimp Connection)

  HARTING

  Available in a wide range of variations in the number of pins. Ideal power source connector for use in harsh environments. Screw connection does not require special tools (Models are separated using "-" rather than spaces).

  Days to Ship:	12 Day(s) or more

• 

  EMI Countermeasure Solder/Press Contact D-sub Connector

  MISUMI

  Entire shell has been nickel-plated as an EMI countermeasure, and dimple processed to ensure a firm contact with the partner

  • Volume Discount

  • For Signal
  • Connection between Boards
  • PLC
  • EMI Countermeasure
  • RS422
  • Solder
  • Gold Plated
  • Screw Lock

  CAD ：

  2D

  Days to Ship:	13 Day(s) or more

• 

  EMI Countermeasures D-Sub Connector with Resin Hood

  MISUMI

  Select screw model or plated / non-plated to suit the application

  • Volume Discount

  • EMI Countermeasure

  CAD ：

  2D

  Days to Ship:	Same day or more

• 

  MIL Press-fit Male Extension Connector

  MISUMI

  [Features]This is a male connector for IDC relay, manufactured by Hirose Electric. This is an IDC type connector that allows for batch IDC together with 1.27 mm pitch ribbon cable and wire-to-wire connection with MIL standard connectors (HIF3 B connectors). Since it has a locking mechanism after joining, it will not come off even if some pulling force is applied.

  • Volume Discount

  • UL
  • MIL
  • Caulking
  • Gold Plated
  • Lever Lock

  CAD ：

  2D

  Days to Ship:	Same day

• 

  SUMICON 1600 Series Multi-Contact Rectangular Connector【1-100 Pieces Per Package】

  HIROSE ELECTRIC

  A rectangular multi-contact connector manufactured using a unique HIROSE design.
  [Features]
  · Nine contact configurations (8, 12, 16, 20, 24, 28, 34, 45, 60) are available. Solder type, wrapping type and crimp type connector units are available.
  · Accessories include C case, CA case, CBA case, ST stopper, STA stopper, STB stopper, etc. that can be combined for use in a wide range of applications.
  · The connector unit and accessories (cases, stoppers) are completely separate in the SUMICON 1600 series. This means that they can be combined for a variety of uses as well as enabling easier wiring connections.
  · These connectors are specified in the NTT specifications, “Spec. No. 1931.”

  • Volume Discount

  Days to Ship:	Same day or more

• 

  57 Series Soldering/DIP-Type Connector

  DDK

  A 2.159-mm pitch ribbon-type connector for soldering. These are the core of the 57 family of connectors, which are available in 5 types.
  
  [Features]
  ■ This 57 Series forms the core of the 57 family of DIP connectors. The following 5 types are available.
  · 57-10 type (unit connection plug).
  · 57-20 type (unit connection receptacle).
  · 57-30 type (plug with straight hood for cables).
  · 57-40 type (panel receptacle with locking spring).
  · 57-60 type (cable relay receptacle).

  Days to Ship:	12 Day(s) or more

• 

  Han Series Hood/Housing

  HARTING

  Han series hood/housing.
  [Features]
  ·Shielded with various locking mechanisms to provide high reliability suitable for industrial use.
  ·Good material and design have been recognized in the last 10 years.
  ·Han A and Han B products are standard in the industrial field.
  [Applications]
  ·Ideal for industrial use.

  Days to Ship:	12 Day(s) or more

• 

  0930 Series Han Waterproof, Single-Lever Pedestal Connector (for Panel Mount)

  MISUMI

  Single-lever panel mounting pedestal for waterproof panel that can incorporate all connector series, depending on the number of cores.
  Aluminum die-cast products are added in one section of the lid

  • Volume Discount

  • CE-Compliant
  • Connection between Boards
  • Lever Lock

  CAD ：

  2D

  Days to Ship:	Same day or more

• 

  Centronics Solder Spring-lock Connector (Panel Mountable Female)

  MISUMI

  [Features]A Centronics connector for fixing with a lineup of low-priced products. A connector that is mounted on a panel and used to connect with a male connector. Cable is connected by soldering.

  • Volume Discount

  • For Signal
  • Connection between Boards
  • Printer

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  IEEE1284, Half-Pitch Connector, EMI-Countermeasure Solder Male Connector

  MISUMI

  High-speed Transfer Supporting Solder Model Half-pitch I/O Connector

  • Volume Discount

  • For Signal
  • PLC
  • Motor
  • EMI Countermeasure
  • SCSI
  • Solder
  • Gold Plated
  • Screw Lock
  • One-Touch Lock

  CAD ：

  2D

  Days to Ship:	Same day or more

• 

  MR Series

  HONDA TSUSHIN KOGYO

  Small-type/multi-pin connector developed for use with data devices which uses wide-type terminals with exceptional reliability.
  
  [Features]
  · Dual screw and a spring lock mechanism that can withstand any shock.
  · Dust-proof mechanism with excellent environmental resistance.
  · Optimal for device miniaturization via improvement of robustness, compactness, weight and density.
  · A relay type case is also provided

  Days to Ship:	16 Day(s) or more

• 

  3.5‑mm Pitch 2-Row Connector For Small Internal Power Supplies, MDF6 Series【1-100 Pieces Per Package】

  HIROSE ELECTRIC

  Connector for board-to-cable connection with 3.5mm pitch. Although compact in size, this connector supports 7 maximum amperes, and its inner-lock construction provides a highly reliable connection, ideal for internal power supplies.
  
  [Features]
  · Compact type with 3.5mm pitch: A small-size, space-saving power supply connector, with pitch between adjacent contacts set at 3.5 mm, and arranged in a double-row pattern with 5 mm between opposing sides.
  · 7A current rating ensured: Despite the compact size of the power supply, 7A current rating is ensured with use of AWG #16 wires (UL/CSA rating is 6A). Box-style header: Twist-resistant due to its box-style construction, enabling complete prevention of insertion errors.
  · Equipped with inner-type full lock: An inner-type full lock with a locking section that is not exposed to the outside ensures secure engagement for a high level of safety.
  In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

  Days to Ship:	16 Day(s) or more

• 

  D-Sub Connector (Solder Termination Type), HD Series

  HIROSE ELECTRIC

  A solder connection type D-sub connector. Terminal connection portion has a solder cup for the easy attachment of every cable type.
  
  [Features]
  · Small and lightweight connector due to metal shell.
  · The solder attachment side has a solder cup construction for easy soldering. It is also optimal for wires up to a maximum size of AWG#20.
  · The insulation material is heat/chemical resistant and uses the excellent PBT resin (UL94V-O) containing glass.
  · CTF, CTH, and other plug case types can be used. Straight dip (SD type), right angle dip (RD type), and ribbon pressure (FD type) connections can be used.

  • Volume Discount

  Days to Ship:	8 Day(s) or more

• 

  17JE Series Soldering Type Connector

  DDK

  17 Series (Dsub type) soldering connection type square connector for cable equipment.
  [Features]
  · Square connector for solder wire connections, with solder cup type contact.
  · Ni plating is used for the metal shell surface treatment, and the pin connector is bead treated.
  · The hood is metalized plastic, which provides weight reduction and a high shielding effect.
  · Either the pin connector or the socket connector can be selected.
  · There are 4 shell sizes: 9, 15, 25, and 37. The core counts are 9 cores, 15 cores, 25 cores, and 37 cores.
  · The cable and plug wire connection can be shielded with a metalized hood, which is effective as an EMI measure.
  [Applications]
  · Can be used as an interface for equipment and devices. Optimal for use on twisted wire of AWG22 or less.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	12 Day(s) or more

• 

  2.00-mm Pitch Serial I/O Connector

  MOLEX

  A Molex 2.0 mm pitch connector for external relay connection.

  Days to Ship:	12 Day(s) or more

• 

  EMI Countermeasure D-Sub Connector with Aluminum Die-cast Hood

  MISUMI

  Sturdy and Lightweight D-sub Hood Made of Aluminum

  • Volume Discount

  • EMI Countermeasure

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Dsub connector EMI countermeasure product/general-purpose product Resin hood

  MISUMI

  [Features]A general-purpose resin hood for EMI (electromagnetic interference) countermeasures that achieves low prices. There are 2 types of mounting screws, a short screw type that can be fixed with a screwdriver and a long screw type that can be operated by hand, making it easy to fix. Each has M2.6 [metric thread] and #4-40 [imperial thread], so you can choose according to your application.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	Same day or more

• 

  MIL Press-fit Female Connector (Without Lock)

  MISUMI

  MIL connector female pressure welding connector (without lock). HIF3 series connector widely used in Japan

  • Volume Discount

  • UL
  • MIL
  • For Signal
  • Connection between Boards
  • Solenoid Valve
  • PLC
  • Pressure Welding
  • Gold Plated

  CAD ：

  2D

  Days to Ship:	Same day or more

• 

  PCR Half Pitch Solder Female Connector

  MISUMI

  Half-pitch Model PCR Solder Model Connector

  • For Signal
  • PLC
  • EMI Countermeasure
  • Solder
  • Gold Plated

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Han Waterproof E-Model Connector (Screw Connection)

  MISUMI

  E Model Connector

  • Volume Discount

  • UL
  • CSA
  • CE-Compliant
  • For Power Supply
  • For Signal
  • Connection between Boards
  • Screw Type
  • Insertion
  • Silver-Plated

  CAD ：

  2D

  Days to Ship:	Same day or more

• 

  Han Waterproof DD-Model Connector (Crimped Connection)

  MISUMI

  Waterproof DD type connector manufactured by HARTING.
  This is a high-density connector that can be incorporated into the hood or pedestal of the Han-E series.

  • Volume Discount

  • UL
  • CSA
  • CE-Compliant
  • For Power Supply
  • For Signal
  • Connection between Boards
  • Connection in Boards
  • Caulking
  • Insertion
  • Silver-Plated

  CAD ：

  2D

  Days to Ship:	13 Day(s) or more

• 

  HA Series Slim Connector

  WEIDMULLER

  A slim type internal connector with which the wiring method can be selected (250 V, 22 A / 16 A, number of poles: 10 / 16 / 32 / 48 (+ PE))

  Days to Ship:	16 Day(s) or more

• 

  1 mm Pitch, 2-Row, Multi-Pin Circuit Board-to-Cable Connector, DF20 Series【1-100 Pieces Per Package】

  HIROSE ELECTRIC

  [Features]
  · This is a board-to-cable connector with dual-row, 1-mm pitch terminal pins.
  · Contributing to a high-density board mounting.
  In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

  Days to Ship:	16 Day(s) or more

• 

  Discrete Wire Connector for Connection, DF1B Series (2.5 mm Pitch)【1-10,000 Pieces Per Package】

  HIROSE ELECTRIC

  [Features]
  · A new type of connector in which IDC terminals are inserted into the case.
  · By using both crimp terminals and IDC terminals, wires with different current capacities can be used in the same case.
  · Terminals can be replaced after connection, providing excellent maintainability.
  · IDC part is protected by the case to provide a high level of reliability.
  · No need for an expensive IDC machine as IDC work can be performed by simply replacing the applicator on a conventional crimping machine.
  · High-profile headers are also available for supporting board potting (filling with resin) performed as a waterproofing measure.
  · Single-row and double-row contact configurations with standard tin or gold plating for each of the “board-to-cable” and “in-line” series products.
  [Applications]
  · Convenient for various types of wiring.
  · For all types of OA equipment, including copy machines and printers.

  • Volume Discount

  Days to Ship:	8 Day(s) or more

• 

  DF11 Series 2‑mm Grid Double-Row Connector (UL/CSA Standard Certified Product)【1-500 Pieces Per Package】

  HIROSE ELECTRIC

  [Features]
  · The contact configuration has been condensed into 2 rows with a 2-mm pitch and 5-mm width.
  · Allows for twice the number of signals with the same amount of space as a conventional 2‑mm pitch single-row connector.
  · Available with either crimped or IDC contacts. Board-to-cable, in-line and board-to-board connector types are also available, enhancing board design flexibility.
  · Choose from gold or tin plating to match application. SMT-compatible products are also available.
  · Accommodates 22 AWG to 30 AWG wires even with a compact 2‑mm double-row design.
  · Reduce man-hours and eliminate manual work processes for easy wiring by using a fully-automatic IDC machine, even for tedious multi-harnessing (branch wire connections).
  [Applications]
  · For all types of OA equipment, including copy machines and printers.

  Days to Ship:	8 Day(s) or more

• 

  Half Pitch Interface Connector, DX Series

  HIROSE ELECTRIC

  I/O Connector with a 1.27-mm pitch (Hirose Electric Original Type). A selection of two types of lock methods and abundant variations for wire connection and implementation methods are available.
  
  

  Days to Ship:	16 Day(s) or more

• 

  Mini Delta Ribbon (MDR) System Wiremount Solder Plug

  3M

  [Features]
  · The MDR system consists of “industry standard product” half pitch I/O connectors.
  · Use of pre-loaded cantilever contacts ensures high reliability, requires little insertion and withdrawal strength and prevents twisting.
  · Accommodates a wide range of cable sizes from AWG#24 to AWG#30.
  · Solder wiring method that does not require special jigs or tools.
  · Solder heat resistance of 360°C for 10 seconds comparable to conventional connectors.
  · Unique contact shape that takes soldering workability into consideration.
  [Applications]
  · For cable connections between equipment.
  · Accommodates a wide range of cable sizes and ideal for solder wiring without special jigs or tools.

  Days to Ship:	12 Day(s) or more

• 

  Han D / DD Series Connector (Crimp Connection)

  HARTING

  Available in a wide range of variations in the number of pins. Ideal power source connector for use in harsh environments. Crimp connection for reliable connection (Models are separated using "-" rather than spaces).

  Days to Ship:	12 Day(s) or more

• 

  Solder/Press Contact (Low Cost) D-Sub Connector

  MISUMI

  D-sub connector. Same product quality as Japanese products with dimple processing and plated pin finishing

  • Volume Discount

  • For Signal
  • Connection between Boards
  • PLC
  • RS422
  • Solder
  • Gold Plated
  • Screw Lock

  CAD ：

  2D

  Days to Ship:	Same day or more

• 

  Centronics Solder Spring-lock Connector (Female)

  MISUMI

  [Features]A Centronics connector for relay with a lineup of low-priced products. This connector is used for wire-to-wire connection with a male connector by attaching cable with solder.

  • Volume Discount

  • For Signal
  • Connection between Boards
  • Printer
  • Solder

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  PCR Half Pitch Female Press-fit Connector

  MISUMI

  Half-pitch model PCR Pressure Welding Model Connector

  • Pressure Welding
  • Gold Plated

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  PCR Half Pitch Connector with Hood

  MISUMI

  Half-pitch PCR Compatible Hood

  CAD ：

  2D

  Days to Ship:	16 Day(s) or more

• 

  Han Waterproof A-Model Connector (Screw Connection)

  MISUMI

  A Model Connector

  • Volume Discount

  • UL
  • CSA
  • CE-Compliant
  • For Power Supply
  • For Signal
  • Connection between Boards
  • Screw Type
  • Insertion
  • Silver-Plated

  CAD ：

  2D

  Days to Ship:	Same day or more

• 

  1.25-mm Pitch Miniature Crimp Connector (UL Standard Certified Product), DF13 Series【1-10,000 Pieces Per Package】

  HIROSE ELECTRIC

  Connector for board-to-cable connection with 1.25-mm pitch. Choose from a number of variations from 2–40 pin, straight-mount, right-angle mount, DIP, and SMT.
  
  [Features]
  · Small.
  · A low-profile design with a mounting height of 5.8 mm. (The SMT mounting is a straight type, the DIP type is a straight 5.3-mm, and the right-angle type is 3.6-mm.)
  · Multipole
  · The dual-row type is a multipole connector with up to 40 pins. It is a high-density connector with a surface area of 30% compared to the single-row type.
  · Supports automatic mounting.
  · The header is available with a suction surface that supports vacuum suction . Therefore, automatic mounting using embossed packing is possible.
  · Complete basic functionality despite compact form factor.
  · The header includes a box structure to prevent twisting and ensure incorrect insertion is completely prevented.
  · Additionally, the Surface Mount (SMT) header is fitted with a reinforcement bracket to prevent solder from peeling.
  
  In-stock made-to-order products cannot be returned or canceled. Thank you for your understanding.

  Days to Ship:	9 Day(s) or more

• 

  Discrete Wire Connector for Connection, DF3 Series (2 mm Pitch)【1-100 Pieces Per Package】

  HIROSE ELECTRIC

  Connector for board-to-cable, cable-to-cable, and board-to-board connections with 2-mm pitch 1 terminal row. Can use for a wide range of equipment.
  In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

  Days to Ship:	12 Day(s) or more

Loading...