Sheet-Type Tubes（Application/special functions：Other）

• 

  Hook Fastener Tube (Copper Foil Shield)

  MISUMI

  Snap fastener sleeve with highly shielding copper foil● Hook tube whose copper foil exhibits high shielding performance●Easy soldering to the shield part, reducing earthing labor-hours●A snap fastener for easy attachment and removal without tools●Cable can be freely taken out and branched from between the snap fasteners

  • Volume Discount

  • EMI Countermeasure

  Days to Ship:	16 Day(s) or more

• 

  TR Tube, Shield Tube (Twin Rail Type)

  DENKA ELECTRON

  [Features]
  • This is a twin-rail type protection tube.
  • The TR tube can be easily opened and closed without tools, which is effective for use over long distances.
  • The strong adhesion at the fitting section allows for exceptional dustproofing and waterproofing properties.
  • Ideal for use in clean rooms.

  Days to Ship:	20 Day(s) or more

• 

  Hook Clamping Tube (Reversible)

  DENKA ELECTRON

  A tube that allows for easily changing and branching wiring and can be easily opened and closed via a hooked snap. This is a reversible tube that can be used on either the black or gray side.
  
  [Features]
  • Protective tube with snaps.
  • This is a protective tube that is used to wrap cables.
  • The seam can be opened and closed with a snap, which makes it difficult for static electricity to occur.
  • This is a reversible type that allows for both gray and black colors that you can use for separate application.
  • Easy to apply over long distances because the hook snap branches mid-way.
  • It is also easy to open and close because the pitch of the hook is wider than that found in conventional products.

  Days to Ship:	8 Day(s) or more

• 

  Magic Tape Tube, MR Tube

  DENKA ELECTRON

  This is a tube that can be easily opened and closed using.

  Days to Ship:	9 Day(s) or more

• 

  Magic Tape Tube, ATS Tube (Shield / Copper Foil)

  DENKA ELECTRON

  This is a Velcro tube that demonstrates a high level shielding effects by using copper sheets.

  Days to Ship:	16 Day(s) or more

• 

  TRST Tube Shield Tube (Single-Side Transparent-Type, Copper Foil Twin-Rail-Type)

  DENKA ELECTRON

  [Features]
  • This is a shield tube with a single side transparent rail that is VW-1 certified.
  • A special copper sheet has been applied to greatly improve the shielding effects and provides stronger resistance towards unnecessary radiation compared with previous versions.
  • Realizes a more effective electromagnetic wave shielding effects than that found in aluminum shield tubes.
  • Achieves an electrical resistance of 0.04 Ω/㎠ which is approximately half that of aluminum.
  • Soldering can be easily performed to allow for ground mounting to be completed in a short amount of time.
  • The tube can easily be opened and closed with bare hands.
  • Does not require specialized tools.
  • This is a twin rail mating closure-type that not only allows for shielding effects but also dustproofing and drip-proofing resistance, which is ideal for application in clean rooms.
  • Can ensure that fastening is thoroughly performed as one side of the rail is transparent.
  • It also has ample flexibility that is also effective in bending locations.
  • Meets UL224VW-1 standards.

  Days to Ship:	13 Day(s) or more

• 

  TRS Tube Shield Tube (Copper Foil Twin-Rail Type)

  DENKA ELECTRON

  [Features]
  • This is a shield tube with a single side transparent rail that is VW-1 certified.
  • A special copper sheet has been applied to greatly improve the shielding effects and provides stronger resistance towards unnecessary radiation compared with previous versions.
  • Realizes a more effective electromagnetic wave shielding effects than that found in aluminum shield tubes.
  • Achieves an electrical resistance of 0.04 Ω/㎠ which is approximately half that of aluminum.
  • Soldering can be easily performed to allow for ground mounting to be completed in a short amount of time.
  • The tube can easily be opened and closed with bare hands.
  • Does not require specialized tools.
  • This is a twin rail mating closure-type that not only allows for shielding effects but also dustproofing and drip-proofing resistance, which is ideal for application in clean rooms.
  • It also has ample flexibility that is also effective in bending locations.

  Days to Ship:	20 Day(s) or more

• 

  Copper Foil Shield Tube, Low Cost Type, ATSF Series

  DENKA ELECTRON

  Double-sided tape type post-assembly insertion shield tube.
  [Features]
  ·It is ideal for noise prevention in places that do not need to be opened and closed after mounting, and has a lower cost design than ATS tubes
  ·Achieves improved electromagnetic wave shielding effect compared to aluminum shield tube / conductive cloth
  ·Achieves an electrical resistance value of 0.04 Ω/cm^2, which is approx. half that of aluminum
  ·The noise prevention shield tube is very easy to solder to the copper foil, so the earth can be completed in a short time
  ·It has excellent flexibility and is a noise prevention shield tube that is softer than aluminum foil or metal mesh type, so it can be used even in narrow spaces where space is not available
  ·It is a noise prevention shield tube that makes it easy to put in and take out cables and wiring because no dedicated tools are required for installation
  ·Since the highest grade special copper foil is used for noise prevention, it has a great effect on unnecessary radiation. Can also be used for cap type

  Days to Ship:	21 Day(s) or more

• 

  Hook Button Type Shield Tube, FKS Series

  DENKA ELECTRON

  Hook button type cable shield tube.
  [Features]
  ·By using a special copper sheet, it is a noise prevention product that is more resistant to unnecessary radiation and has a significantly improved electromagnetic wave shielding effect
  ·The definitive version of cable shield and EMC noise prevention (Shielded cable, noise prevention, EMC countermeasures, audio noise)
  ·Ideal for antistatic when shielded in cleanrooms, etc. If the overall length of the object is long, work efficiency will be improved
  ·Achieves improved electromagnetic wave shielding effect than aluminum shield tube. The electrical resistance value is 0.04 Ω/cm^2, which is approx. half that of aluminum
  ·Soldering is very easy, so earth is completed in a short time
  ·Opening and closing the tube is easy with bare hands. No dedicated tools required
  ·High drip-proof and dust-proof
  ·Since it is a hook type and no dedicated tools are required for installation, so it is easy to put in and take out cables and wiring
  ·It has excellent flexibility and is softer than aluminum foil or metal mesh type, so it can be used in narrow spaces where space is not available

  Days to Ship:	21 Day(s) or more

Loading...