(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

9.5 Million Products, 1,600 Brands, Free Shipping,
63,000 Stock items for Same Day Shipping

9.5 Juta Produk, 1,600 Merek, Gratis Pengiriman,
63,000 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.

Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 8:00 21/4/2024 sampai dengan 5:00 pada tanggal 22/4/2024. Kami mohon maaf atas ketidaknyamanan yang terjadi.
Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 21/4/2024 to 5:00 (WIB) 22/4/2024. We apologize for the inconvenience.
Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

Square End Mills (Carbide)（work material：Cast Iron）

240 items

: 30; 45; 60

Days to Ship	All Same day 1 Day(s) or Less 2 Day(s) or Less 3 Day(s) or Less 8 Day(s) or Less 9 Day(s) or Less 10 Day(s) or Less 11 Day(s) or Less 12 Day(s) or Less 13 Day(s) or Less

1
2
3
4
5
Next >>

(Economy series) XAL Series Carbide Square End Mill, 2-Flute / 1.5D Flute Length (Stub) Model

MISUMI

Stub flute length items that are ideal for grooving are available at incredibly low prices

Volume Discount

XAL

General Steel

2 Flutes
Days to Ship: 16 Day(s) or more
GSX MILL 4-Flute Blade 4D GSX4C-4D

NACHI(FUJIKOSHI)

Supports wet processing of raw materials through dry processing of high hardness materials.

Days to Ship: 16 Day(s) or more
WXS Coated Multiple Flutes Short Super_FXS-CR-EMS

OSG

High-speed machining end mill with extremely high tool rigidity. High speed machining of hardened steel is also possible.

Days to Ship: 12 Day(s) or more
(Economy series) XAL series carbide square end mill, 4-flute / 3D Flute Length (regular) model

MISUMI

The Misumi's original fine intermediate flute length is available at a reasonable price

Volume Discount

XAL

General Steel

4 Flutes
Days to Ship: Same day or more
Carbide square end mill, 2-flute / 2D Flute Length (short) model

MISUMI

Excellent in general versatility, it is a 2D flute length type that can be used in a wide range of applications

Volume Discount

Non-Coated

General Steel

2 Flutes

S (Short)
Days to Ship: 10 Day(s) or more
GS MILL Slot GSSLT

NACHI(FUJIKOSHI)

Capable of continuous high-efficiency machining from drilling to grooving. Optimal for thin plates and small machines with low clamping force.

Days to Ship: 16 Day(s) or more
(Economy series) XAL Series Carbide Square End Mill, 4-Flute / 4D Flute Length (Long) Model

MISUMI

Popular sizes that support deeper side milling are available in XAL Series

Volume Discount

XAL

General Steel

4 Flutes
Days to Ship: Same day or more
VAC Series Carbide 4-Flute Square End Mill (Extra-Long Model)

MISUMI

[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Effective for processing deep parts due to extra long blade length
·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted
·Can process heat-treated steel up to 50HRC
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·Coating with excellent lubricity provides stable abrasion resistance and improves shape accuracy of workpiece (VAC coating has weak electrical conductivity. Please be careful when using an electrical tool setter.)
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount
Days to Ship: 16 Day(s) or more
GS MILL 4-Flute Blade 4GS

NACHI(FUJIKOSHI)

Supports a wide range of materials from raw materials to hardened materials. Suitable for finishing grooves and side surfaces.

Days to Ship: 16 Day(s) or more
Solid Spiral End Mill SSM2000 Type

SUMITOMO ELECTRIC HARDMETAL

Standard type of SSM type.
Work Material: General Steel/Cast Iron/Aluminum
Coating: Uncoated
Standard/Alteration Category: Manufacturer's standard product, Number of flutes (pcs.) 2
corner shape: sharp corner
Helix angle: Standard helix (30 to 44°)

Days to Ship: 16 Day(s) or more
Carbide square end mill, 2-flute / 3D Flute Length (regular) model

MISUMI

The 3D flute length type that produces high-quality finish supports a wide range of machining areas

Volume Discount

Non-Coated

General Steel

2 Flutes

R (Regular)
Days to Ship: 10 Day(s) or more
Carbide square end mill, 4-flute / 4D Flute Length (long) model

MISUMI

Achieves both high levels of machining precision and reduction of processing time in side milling

Volume Discount

Non-Coated

General Steel

4 Flutes

L (Long)
Days to Ship: 10 Day(s) or more
X's Mill Geo Medium 4GEOM

NACHI(FUJIKOSHI)

Supports a wide range of applications from raw materials to high hardness steel.

Days to Ship: 16 Day(s) or more
X's Mill Geo Long SL4GEO

NACHI(FUJIKOSHI)

Suitable for side processing of wide side surfaces and deep positions.

Days to Ship: 16 Day(s) or more
Micro Grain Carbide End Mills WXL Coated 4 Flutes Short_WXL-EMS

OSG

[Features]
· With its WXL hard lubricating coating, this end mill offers effective cutting performance on a wide range of materials, including general steel, quenched steel and copper alloys.
Recommended for both wet-type and dry-type milling.

Days to Ship: Same day or more
GSX MILL VL Slot 2.5D GSXVLSLT3-2.5D

NACHI(FUJIKOSHI)

[Features]
· Reduces chattering, and capable of continuous high-efficiency machining from hole drilling to groove cutting.

Days to Ship: 16 Day(s) or more
Anti-Vibration Stub Carbide End Mill_AE-VMSS

OSG

[Features]
· The DUARISE coating offers excellent lubrication, wear resistance and high-temperature oxidation resistance. The composite multilayer structure helps prevent thermal cracking. Also, the smoothing of the coating surface improves machining surface precision.
The positive-angle flute has excellent sharpness and helps reduce cutting resistance. The new flute form achieves both high tool rigidity and a good chip discharge performance, enabling stable machining and reduced burring.
Use of a variable-lead geometry and unequal divisions enables stable, high-efficiency machining.

Days to Ship: 2 Day(s) or more
TSC series carbide square end mill, 4-flute / 2.5D Flute Length model

MISUMI

[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Flute length is 2.5 times the cutting diameter between short and regular flutes
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

4 Flutes

SR
Days to Ship: 10 Day(s) or more
Non-Coated TS Coated Carbide 0.1 mm Unit Corner C Designated End Mill

MISUMI

[Features]
·Alteration end mill that can specify corner chamfer size of carbide end mill in 0.1 mm increments
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Non-Coated

General Steel
Days to Ship: 10 Day(s) or more
Carbide Square End Mill, 2-Flute / 0.01 mm Designation Model

MISUMI

The blade diameter of 0.01 mm increments can be selected from the extensive variations of flute length

Volume Discount

Non-Coated

General Steel

2 Flutes
Days to Ship: 10 Day(s) or more
GSX MILL 4-Flute Blade 2.5D GSX4C-2.5D

NACHI(FUJIKOSHI)

Supports wet processing of raw materials through high-speed dry processing of high hardness materials.

Days to Ship: 10 Day(s) or more
GS MILL 2-Flute Blade 2GS

NACHI(FUJIKOSHI)

Supports a wide range of materials from raw materials to hardened materials. Suitable for finishing.

Days to Ship: 16 Day(s) or more
GSX MILL 4-Flute Blade 1.5D GSX4C-1.5D

NACHI(FUJIKOSHI)

Supports wet processing of raw materials through high-speed dry processing of high hardness materials.

Days to Ship: 16 Day(s) or more
X's Mill Geo 4XSGEO

NACHI(FUJIKOSHI)

Capable of high-feed and high-efficiency groove machining. Supports a wide range of applications from mold steel to difficult-to-cut materials.

Days to Ship: 11 Day(s) or more
Anchor V 2-Flute 2CE

NACHI(FUJIKOSHI)

General purpose carbide end mill. Suitable for grooving.

Days to Ship: 16 Day(s) or more
ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Extra Long_FX-MG-EXDL

OSG

General purpose type 2-flute ultra-long blade end mill with FX coating for excellent heat resistance.

Days to Ship: 16 Day(s) or more
2-flute short type MG-EDS [Alterations Available]

OSG

[Notice] Alteration can be specified. Please select from "Standard/Alteration classification" of the narrowing conditions.

It's a pinkado.

Days to Ship: 16 Day(s) or more
Micro Grain Carbide End Mills 2 Flutes Long_MG-EDL

OSG

[Notice] Alteration can be specified. Please select from "Standard/Alteration classification" of the narrowing conditions.

[Specifications]
·Blade diameters of 6 to 12 mm are sharp, and 13 to 25 mm are sharp.

Days to Ship: 16 Day(s) or more
ULTRA WX Micro Grain Carbide End Mills TiAlN coated 4 Flutes Stub (Corner Protect Type)_WX-G-EMSS

OSG

Heavy duty type 4-flute end mill with reinforced bottom blade corner. Capable of high-speed and high-feed cutting thanks to its rigid short blade length. Enables reductions in lead time during mass production machining.

Days to Ship: 16 Day(s) or more
ULTRA FX Micro Grain Carbide End Mills TiAlN Corted 2 Flutes for Counterboring_FX-ZDS

OSG

End mill dedicated for counterboring. Can be used for counterboring processing of hex bolts as well as a tool for pre-drilling processing on angled surface.

Days to Ship: 8 Day(s) or more
SLE2 Long Shank Slotting End Mill G2

ASAHI TOOLS

φ3 to φ7 are tip brazing types. Uses a long shank to increase the versatility of the protruding length.

Days to Ship: 16 Day(s) or more
Focus on Accuracy / Finished Surface 4FESM

KYOCERA

[Features]
A solid end mill suitable for general steel, stainless steel, and other workpieces, 4 flutes.
The MEGACOAT coating and high-quality cutting edges provide high abrasion resistance and heat resistance for high precision end milling.
It can perform drilling and chamfer at the same time.
[Applications]
Suitable for finishing of general steel, stainless steel, aluminum, etc.

Days to Ship: 8 Day(s) or more
End Mill with 2 Carbide Flutes and Corner C Face KSC-2

KYOWA SEIKO

[Applications]It can be used for flat surface machining, side machining, grooving, and inclined cutting. [Features]Using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel and cast iron.

Days to Ship: 12 Day(s) or more
Carbide Miniature End Mill KMSE‐2

KYOWA SEIKO

[Applications]It can be used for flat surface, side, groove, plunge (Z feed), inclined cutting, and counterbore machining. [Features]Using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel and cast iron.

Days to Ship: 12 Day(s) or more
CoroMill Plura - Dedicated End Mill for Rough Machining and Finish Machining 2P340-PB

SANDVIK

High quality carbide end mill tools for a highly productive, efficient and reliable milling solution

Days to Ship: 16 Day(s) or more
Carbide 4-Flute Variable Split Variable Lead End Mill 38°/41° E141-3.0HX

7 LEADERS

[Features]
· 3.0D blade length type.
· 4-flute variable split and unequal lead reduce chatter, enabling high-efficiency cutting.
· The multilayer coating uses nanoparticles.
· Excellent lubricity and heat resistance.
· Suitable for a wide range of work materials from general steel to high hardness steel.
· Enables groove cutting (ap 0.5D to 1.0D) as is after machining in the Z axis direction (ap 0.5D to 1.0D).

Days to Ship: 12 Day(s) or more
End Mill with 2 Carbide Flutes 35° E122X

7 LEADERS

[Features]
· 2-flute general-purpose end mill.
· A 0.1 increment outer diameter series.
· Supports a wide range of machining.
· Nanoparticle multilayer coating.
· Excellent lubricity and abrasion resistance.
· Exhibits its strength in general cutting processes.

Days to Ship: 9 Day(s) or more
Anti-Vibration Short Carbide End Mill_AE-VMS

OSG

[Features]
· DUARISE coating
· Offers excellent lubrication, wear resistance and high-temperature oxidation resistance. The composite multilayer structure helps prevent thermal cracking.
Smoothing of the coating surface improves machining surface precision.
The positive-angle flute has excellent sharpness and helps reduce cutting resistance.
A flute form that achieves both high tool rigidity and a good chip discharge performance, enabling stable machining and a reduction in burring.
Use of a variable-lead geometry and unequal divisions enables stable, high-efficiency machining.

Days to Ship: 2 Day(s) or more
(Economy series) XAL series carbide square end mill, 2-flute / 2D Flute Length (short) model

MISUMI

The price of the low-cost classic XAL Series has been further reduced!

Volume Discount

XAL

General Steel

2 Flutes
Days to Ship: Same day or more
(Economy series) XAL series carbide square end mill, 2-flute / 3D Flute Length model

MISUMI

The Misumi's unique lineup of fine flute length is available at attractive low prices

Volume Discount

XAL

General Steel

2 Flutes
Days to Ship: Same day or more
(Economy series) XAL series carbide square end mill, 4-flute / 2D Flute Length (short) model

MISUMI

Popular XAL Series with the 4-flute structure that's ideal for side milling has been further reduced in price!

Volume Discount

XAL

General Steel

4 Flutes
Days to Ship: 16 Day(s) or more
XAC series carbide square end mill, 2-flute / short model

MISUMI

[Specification]
·Standard TiAlN coating

Volume Discount

TiAlN

General Steel

2 Flutes

S (Short)
Days to Ship: 16 Day(s) or more
XAC series carbide square end mill, 4-flute / short model

MISUMI

[Specification]
·Standard TiAlN coating

Volume Discount

TiAlN

General Steel

4 Flutes

S (Short)
Days to Ship: Same day or more
XAC series carbide square end mill, 4-flute / long model

MISUMI

User friendly TiAlN coated series with long flute length

Volume Discount

TiAlN

General Steel

4 Flutes

L (Long)
Days to Ship: 16 Day(s) or more
TSC series carbide square end mill for shrinkage fitting, 2-flute / 1D Flute Length (stub) model

MISUMI

[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Tool rigidity is emphasized by shortening the flute length and overall length for shrink fit
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

2 Flutes

B (Stub)
Days to Ship: 16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	Same day or more

Days to Ship:	10 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	Same day or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	Same day or more

Days to Ship:	16 Day(s) or more

Days to Ship:	2 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	11 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	9 Day(s) or more

Days to Ship:	2 Day(s) or more

Days to Ship:	Same day or more

Days to Ship:	Same day or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	Same day or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more


Brand
Product Series
Days to Ship
Specifications
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Torsion Angle (θ)
Machining Application
Coating
Blade tip shape
Type


Brand	MISUMI	NACHI(FUJIKOSHI)	OSG	MISUMI	MISUMI	NACHI(FUJIKOSHI)	MISUMI	MISUMI	NACHI(FUJIKOSHI)	SUMITOMO ELECTRIC HARDMETAL	MISUMI	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	NACHI(FUJIKOSHI)	OSG	MISUMI	MISUMI	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	OSG	OSG	OSG	OSG	ASAHI TOOLS	KYOCERA	KYOWA SEIKO	KYOWA SEIKO	SANDVIK	7 LEADERS	7 LEADERS	OSG	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI
Product Series	(Economy series) XAL Series Carbide Square End Mill, 2-Flute / 1.5D Flute Length (Stub) Model	GSX MILL 4-Flute Blade 4D GSX4C-4D	WXS Coated Multiple Flutes Short Super_FXS-CR-EMS	(Economy series) XAL series carbide square end mill, 4-flute / 3D Flute Length (regular) model	Carbide square end mill, 2-flute / 2D Flute Length (short) model	GS MILL Slot GSSLT	(Economy series) XAL Series Carbide Square End Mill, 4-Flute / 4D Flute Length (Long) Model	VAC Series Carbide 4-Flute Square End Mill (Extra-Long Model)	GS MILL 4-Flute Blade 4GS	Solid Spiral End Mill SSM2000 Type	Carbide square end mill, 2-flute / 3D Flute Length (regular) model	Carbide square end mill, 4-flute / 4D Flute Length (long) model	X's Mill Geo Medium 4GEOM	X's Mill Geo Long SL4GEO	Micro Grain Carbide End Mills WXL Coated 4 Flutes Short_WXL-EMS	GSX MILL VL Slot 2.5D GSXVLSLT3-2.5D	Anti-Vibration Stub Carbide End Mill_AE-VMSS	TSC series carbide square end mill, 4-flute / 2.5D Flute Length model	Non-Coated TS Coated Carbide 0.1 mm Unit Corner C Designated End Mill	Carbide Square End Mill, 2-Flute / 0.01 mm Designation Model	GSX MILL 4-Flute Blade 2.5D GSX4C-2.5D	GS MILL 2-Flute Blade 2GS	GSX MILL 4-Flute Blade 1.5D GSX4C-1.5D	X's Mill Geo 4XSGEO	Anchor V 2-Flute 2CE	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Extra Long_FX-MG-EXDL	2-flute short type MG-EDS [Alterations Available]	Micro Grain Carbide End Mills 2 Flutes Long_MG-EDL	ULTRA WX Micro Grain Carbide End Mills TiAlN coated 4 Flutes Stub (Corner Protect Type)_WX-G-EMSS	ULTRA FX Micro Grain Carbide End Mills TiAlN Corted 2 Flutes for Counterboring_FX-ZDS	SLE2 Long Shank Slotting End Mill G2	Focus on Accuracy / Finished Surface 4FESM	End Mill with 2 Carbide Flutes and Corner C Face KSC-2	Carbide Miniature End Mill KMSE‐2	CoroMill Plura - Dedicated End Mill for Rough Machining and Finish Machining 2P340-PB	Carbide 4-Flute Variable Split Variable Lead End Mill 38°/41° E141-3.0HX	End Mill with 2 Carbide Flutes 35° E122X	Anti-Vibration Short Carbide End Mill_AE-VMS	(Economy series) XAL series carbide square end mill, 2-flute / 2D Flute Length (short) model	(Economy series) XAL series carbide square end mill, 2-flute / 3D Flute Length model	(Economy series) XAL series carbide square end mill, 4-flute / 2D Flute Length (short) model	XAC series carbide square end mill, 2-flute / short model	XAC series carbide square end mill, 4-flute / short model	XAC series carbide square end mill, 4-flute / long model	TSC series carbide square end mill for shrinkage fitting, 2-flute / 1D Flute Length (stub) model
Days to Ship	16 Day(s) or more	16 Day(s) or more	12 Day(s) or more	Same day or more	10 Day(s) or more	16 Day(s) or more	Same day or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	10 Day(s) or more	10 Day(s) or more	16 Day(s) or more	16 Day(s) or more	Same day or more	16 Day(s) or more	2 Day(s) or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more	16 Day(s) or more	16 Day(s) or more	11 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	8 Day(s) or more	16 Day(s) or more	8 Day(s) or more	12 Day(s) or more	12 Day(s) or more	16 Day(s) or more	12 Day(s) or more	9 Day(s) or more	2 Day(s) or more	Same day or more	Same day or more	16 Day(s) or more	16 Day(s) or more	Same day or more	16 Day(s) or more	16 Day(s) or more
Specifications	XAL General Steel 2 Flutes			XAL General Steel 4 Flutes	Non-Coated General Steel 2 Flutes S (Short)		XAL General Steel 4 Flutes				Non-Coated General Steel 2 Flutes R (Regular)	Non-Coated General Steel 4 Flutes L (Long)						TS General Steel 4 Flutes SR	Non-Coated General Steel	Non-Coated General Steel 2 Flutes																			XAL General Steel 2 Flutes	XAL General Steel 2 Flutes	XAL General Steel 4 Flutes	TiAlN General Steel 2 Flutes S (Short)	TiAlN General Steel 4 Flutes S (Short)	TiAlN General Steel 4 Flutes L (Long)	TS General Steel 2 Flutes B (Stub)
Blade diameter (D)(φ)	0.5 ～ 20	1 ～ 20	1.5 ～ 30	1 ～ 20	0.2 ～ 12	3 ～ 16	1 ～ 12	1.5 ～ 25	1 ～ 20	2	0.2 ～ 12	1 ～ 12	2 ～ 20	3 ～ 20	1 ～ 30	3 ～ 16	3 ～ 12	1 ～ 16	2 ～ 20	3.15 ～ 19.99	1 ～ 20	0.2 ～ 20	1 ～ 20	1.1 ～ 32	1 ～ 20	3 ～ 30	1 ～ 25	3 ～ 25	3 ～ 12	3 ～ 20	3 ～ 30	1 ～ 16	1 ～ 6	0.1 ～ 3	2 ～ 25	1 ～ 20	0.2 ～ 20	3 ～ 16	0.1 ～ 20	0.1 ～ 20	1 ～ 20	1 ～ 20	2 ～ 20	3 ～ 12	0.5 ～ 12
Blade length (ℓ)(mm)	0.75 ～ 30	4 ～ 80	5 ～ 55	3 ～ 60	0.4 ～ 24	8 ～ 32	4 ～ 48	6 ～ 120	2.5 ～ 38	6	0.6 ～ 36	4 ～ 48	10 ～ 56	18 ～ 75	2.5 ～ 45	7.5 ～ 40	4.5 ～ 18	2.5 ～ 40	3 ～ 60	3.5 ～ 48	2.5 ～ 50	0.4 ～ 38	1.5 ～ 30	6 ～ 70	3 ～ 38	20 ～ 112	2.5 ～ 45	12 ～ 67	4.5 ～ 18	8 ～ 38	8 ～ 21	2.5 ～ 32	3 ～ 13	0.2 ～ 8	7.5 ～ 45.5	3 ～ 60	0.5 ～ 38	8 ～ 32	0.2 ～ 40	0.3 ～ 60	2 ～ 40	2.5 ～ 38	6 ～ 38	12 ～ 30	0.5 ～ 12
Underneck length (ℓ1)(mm)	-	-	-	-	17 ～ 45	-	-	-	-	-	23 ～ 55	29 ～ 70	-	-	-	-	-	20 ～ 73	-	-	-	-	-	-	-	-	-	-	-	-	15 ～ 41	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Shank diameter (d)(mm)	4 ～ 20	4 ～ 20	6 ～ 32	4 ～ 20	3 ～ 12	6 ～ 16	4 ～ 12	4 ～ 25	3 ～ 20	4	3 ～ 12	4 ～ 12	4 ～ 20	6 ～ 20	4 ～ 32	6 ～ 16	6 ～ 12	4 ～ 16	4 ～ 20	6 ～ 20	4 ～ 20	3 ～ 20	4 ～ 20	4 ～ 32	4 ～ 20	6 ～ 32	4 ～ 25	6 ～ 25	6 ～ 12	6 ～ 20	10 ～ 32	4 ～ 16	4 ～ 6	3	6 ～ 25	4 ～ 20	4 ～ 20	6 ～ 16	3 ～ 20	3 ～ 20	4 ～ 20	4 ～ 20	4 ～ 20	6 ～ 12	4 ～ 12
Number of flutes(sheet)	2	4	4 ～ 8	4	2	3	4	4	4	2	2	4	4	4	4	3	4	4	2 ～ 4	2	4	2	4	4	2	2	2	2	4	2	2	4	2	2	4	4	2	4	2	2	4	2	4	4	2
Overall Length (L)(mm)	40 ～ 110	40 ～ 140	60 ～ 140	45 ～ 130	35 ～ 75	50 ～ 115	45 ～ 100	60 ～ 250	38 ～ 100	40	40 ～ 85	45 ～ 100	50 ～ 125	60 ～ 155	40 ～ 125	45 ～ 90	45 ～ 75	45 ～ 105	40 ～ 130	40 ～ 105	40 ～ 100	38 ～ 100	40 ～ 100	50 ～ 175	50 ～ 100	60 ～ 225	40 ～ 120	50 ～ 140	50 ～ 75	50 ～ 125	100 ～ 220	45 ～ 90	40 ～ 50	40	57 ～ 121	50 ～ 120	50 ～ 100	60 ～ 100	40 ～ 110	40 ～ 110	40 ～ 110	40 ～ 105	40 ～ 105	50 ～ 90	40 ～ 65
work material	Cast Iron[○]	Cast Iron[○]	Cast Iron[◎]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[◎]	Cast Iron[○]	Cast Iron[◎]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○/◎]	Cast Iron[○]	Cast Iron[○]	Cast Iron[◎]	Cast Iron[◎]	Cast Iron[◎]	Cast Iron[○]	Cast Iron[◎]	Cast Iron[◎]	Cast Iron[○]	Cast Iron[◎]	Cast Iron[○]	Cast Iron[◎]	Cast Iron[○]	Cast Iron[○/◎]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]	Cast Iron[○]
Torsion Angle (θ)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	-	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Variable lead	Variable lead	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Weak torsion (15 to 25˚)	No torsion	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Variable lead	Standard torsion (30-40°)	Standard torsion (30-40°)	Variable lead	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)
Machining Application	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Groove / Inclined Cuts / Countersinking	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Groove / Inclined Cuts	Groove	Plane / Side / Groove / Inclined Cuts / Countersinking	Plane / Side / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Groove	Side / Groove / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Countersinking	Plane / Countersinking	Plane / Side / Groove	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane	Plane / Side / Groove / Inclined Cuts / Countersinking	Plane / Side / Groove / Countersinking	Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Groove / Inclined Cuts
Coating	For General Steels (AlCrN, etc.)	TiAlN	TiAlN	For General Steels (AlCrN, etc.)	Non-Coated	TiAlN	For General Steels (AlCrN, etc.)	-	TiAlN	Non-Coated	Non-Coated	Non-Coated	TiAlN	TiAlN	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	-	For High Hardness (Silicon Group)	For High Hardness (Silicon Group) / Non-Coated	Non-Coated	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	TiAlN	-	TiAlN	Non-Coated	Non-Coated	TiAlN	TiAlN	Non-Coated	For General Steels (AlCrN, etc.)	Non-Coated	Non-Coated	-	-	-	-	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	TiAlN	TiAlN	TiAlN	For High Hardness (Silicon Group)
Blade tip shape	Sharp Edge / With Lead	With Lead	With Lead	Sharp Edge / With Lead	Sharp Edge / With Lead	With Lead	Sharp Edge / With Lead	-	Sharp Edge	Sharp Edge	Sharp Edge / With Lead	Sharp Edge / With Lead	With Lead	With Lead	Sharp Edge / With Lead	Sharp Edge	-	Sharp Edge / With Lead	With Lead	Sharp Edge / With Lead	With Lead	Sharp Edge	With Lead	With Lead	Sharp Edge	With Lead	Sharp Edge / With Lead	Sharp Edge / With Lead	With Lead	With Lead	-	Sharp Edge	C plane	Sharp Edge	-	With Lead	With Lead	-	Sharp Edge / With Lead	Sharp Edge / With Lead	Sharp Edge / With Lead	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge / With Lead
Type	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	High Helical	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square

1
2
3
4
5
Next >>

Configure

Specification/Dimensions

Blade diameter (D)(φ)
- 0.01～0.99
  - 0.01
  - 0.02
  - 0.03
  - 0.04
  - 0.05
  - 0.06
  - 0.07
  - 0.08
  - 0.09
  - 0.1
  - 0.11
  - 0.12
  - 0.13
  - 0.14
  - 0.15
  - 0.16
  - 0.17
  - 0.18
  - 0.19
  - 0.2
  - 0.21
  - 0.22
  - 0.23
  - 0.24
  - 0.25
  - 0.26
  - 0.27
  - 0.28
  - 0.29
  - 0.3
  - 0.31
  - 0.32
  - 0.33
  - 0.34
  - 0.35
  - 0.36
  - 0.37
  - 0.38
  - 0.39
  - 0.4
  - 0.41
  - 0.42
  - 0.43
  - 0.44
  - 0.45
  - 0.46
  - 0.47
  - 0.48
  - 0.49
  - 0.5
  - 0.51
  - 0.52
  - 0.53
  - 0.54
  - 0.55
  - 0.56
  - 0.57
  - 0.58
  - 0.59
  - 0.6
  - 0.61
  - 0.62
  - 0.63
  - 0.64
  - 0.65
  - 0.66
  - 0.67
  - 0.68
  - 0.69
  - 0.7
  - 0.71
  - 0.72
  - 0.73
  - 0.74
  - 0.75
  - 0.76
  - 0.77
  - 0.78
  - 0.79
  - 0.8
  - 0.81
  - 0.82
  - 0.83
  - 0.84
  - 0.85
  - 0.86
  - 0.87
  - 0.88
  - 0.89
  - 0.9
  - 0.91
  - 0.92
  - 0.93
  - 0.94
  - 0.95
  - 0.96
  - 0.97
  - 0.98
  - 0.99
- 1～1.99
  - 1
  - 1.01
  - 1.02
  - 1.03
  - 1.04
  - 1.05
  - 1.06
  - 1.07
  - 1.08
  - 1.09
  - 1.1
  - 1.11
  - 1.12
  - 1.13
  - 1.14
  - 1.15
  - 1.16
  - 1.17
  - 1.18
  - 1.19
  - 1.2
  - 1.21
  - 1.22
  - 1.23
  - 1.24
  - 1.25
  - 1.26
  - 1.27
  - 1.28
  - 1.29
  - 1.3
  - 1.31
  - 1.32
  - 1.33
  - 1.34
  - 1.35
  - 1.36
  - 1.37
  - 1.38
  - 1.39
  - 1.4
  - 1.41
  - 1.42
  - 1.43
  - 1.44
  - 1.45
  - 1.46
  - 1.47
  - 1.48
  - 1.49
  - 1.5
  - 1.51
  - 1.52
  - 1.53
  - 1.54
  - 1.55
  - 1.56
  - 1.57
  - 1.58
  - 1.59
  - 1.6
  - 1.61
  - 1.62
  - 1.63
  - 1.64
  - 1.65
  - 1.66
  - 1.67
  - 1.68
  - 1.69
  - 1.7
  - 1.71
  - 1.72
  - 1.73
  - 1.74
  - 1.75
  - 1.76
  - 1.77
  - 1.78
  - 1.79
  - 1.8
  - 1.81
  - 1.82
  - 1.83
  - 1.84
  - 1.85
  - 1.86
  - 1.87
  - 1.88
  - 1.89
  - 1.9
  - 1.91
  - 1.92
  - 1.93
  - 1.94
  - 1.95
  - 1.96
  - 1.97
  - 1.98
  - 1.99
- 2～2.99
  - 2
  - 2.01
  - 2.02
  - 2.03
  - 2.04
  - 2.05
  - 2.06
  - 2.07
  - 2.08
  - 2.09
  - 2.1
  - 2.11
  - 2.12
  - 2.13
  - 2.14
  - 2.15
  - 2.16
  - 2.17
  - 2.18
  - 2.19
  - 2.2
  - 2.21
  - 2.22
  - 2.23
  - 2.24
  - 2.25
  - 2.26
  - 2.27
  - 2.28
  - 2.29
  - 2.3
  - 2.31
  - 2.32
  - 2.33
  - 2.34
  - 2.35
  - 2.36
  - 2.37
  - 2.38
  - 2.39
  - 2.4
  - 2.41
  - 2.42
  - 2.43
  - 2.44
  - 2.45
  - 2.46
  - 2.47
  - 2.48
  - 2.49
  - 2.5
  - 2.51
  - 2.52
  - 2.53
  - 2.54
  - 2.55
  - 2.56
  - 2.57
  - 2.58
  - 2.59
  - 2.6
  - 2.61
  - 2.62
  - 2.63
  - 2.64
  - 2.65
  - 2.66
  - 2.67
  - 2.68
  - 2.69
  - 2.7
  - 2.71
  - 2.72
  - 2.73
  - 2.74
  - 2.75
  - 2.76
  - 2.77
  - 2.78
  - 2.79
  - 2.8
  - 2.81
  - 2.82
  - 2.83
  - 2.84
  - 2.85
  - 2.86
  - 2.87
  - 2.88
  - 2.89
  - 2.9
  - 2.91
  - 2.92
  - 2.93
  - 2.94
  - 2.95
  - 2.96
  - 2.97
  - 2.98
  - 2.99
- 3～3.99
  - 3
  - 3.01
  - 3.02
  - 3.03
  - 3.04
  - 3.05
  - 3.06
  - 3.07
  - 3.08
  - 3.09
  - 3.1
  - 3.11
  - 3.12
  - 3.13
  - 3.14
  - 3.15
  - 3.16
  - 3.17
  - 3.175
  - 3.18
  - 3.19
  - 3.2
  - 3.21
  - 3.22
  - 3.23
  - 3.24
  - 3.25
  - 3.26
  - 3.27
  - 3.28
  - 3.29
  - 3.3
  - 3.31
  - 3.32
  - 3.33
  - 3.34
  - 3.35
  - 3.36
  - 3.37
  - 3.38
  - 3.39
  - 3.4
  - 3.41
  - 3.42
  - 3.43
  - 3.44
  - 3.45
  - 3.46
  - 3.47
  - 3.48
  - 3.49
  - 3.5
  - 3.51
  - 3.52
  - 3.53
  - 3.54
  - 3.55
  - 3.56
  - 3.57
  - 3.58
  - 3.59
  - 3.6
  - 3.61
  - 3.62
  - 3.63
  - 3.64
  - 3.65
  - 3.66
  - 3.67
  - 3.68
  - 3.69
  - 3.7
  - 3.71
  - 3.72
  - 3.73
  - 3.74
  - 3.75
  - 3.76
  - 3.77
  - 3.78
  - 3.79
  - 3.8
  - 3.81
  - 3.82
  - 3.83
  - 3.84
  - 3.85
  - 3.86
  - 3.87
  - 3.88
  - 3.89
  - 3.9
  - 3.91
  - 3.92
  - 3.93
  - 3.94
  - 3.95
  - 3.96
  - 3.97
  - 3.98
  - 3.99
- 4～4.99
  - 4
  - 4.01
  - 4.02
  - 4.03
  - 4.04
  - 4.05
  - 4.06
  - 4.07
  - 4.08
  - 4.09
  - 4.1
  - 4.11
  - 4.12
  - 4.13
  - 4.14
  - 4.15
  - 4.16
  - 4.17
  - 4.18
  - 4.19
  - 4.2
  - 4.21
  - 4.22
  - 4.23
  - 4.24
  - 4.25
  - 4.26
  - 4.27
  - 4.28
  - 4.29
  - 4.3
  - 4.31
  - 4.32
  - 4.33
  - 4.34
  - 4.35
  - 4.36
  - 4.37
  - 4.38
  - 4.39
  - 4.4
  - 4.41
  - 4.42
  - 4.43
  - 4.44
  - 4.45
  - 4.46
  - 4.47
  - 4.48
  - 4.49
  - 4.5
  - 4.51
  - 4.52
  - 4.53
  - 4.54
  - 4.55
  - 4.56
  - 4.57
  - 4.58
  - 4.59
  - 4.6
  - 4.61
  - 4.62
  - 4.63
  - 4.64
  - 4.65
  - 4.66
  - 4.67
  - 4.68
  - 4.69
  - 4.7
  - 4.71
  - 4.72
  - 4.73
  - 4.74
  - 4.75
  - 4.76
  - 4.77
  - 4.78
  - 4.79
  - 4.8
  - 4.81
  - 4.82
  - 4.83
  - 4.84
  - 4.85
  - 4.86
  - 4.87
  - 4.88
  - 4.89
  - 4.9
  - 4.91
  - 4.92
  - 4.93
  - 4.94
  - 4.95
  - 4.96
  - 4.97
  - 4.98
  - 4.99
- 5～5.99
  - 5
  - 5.01
  - 5.02
  - 5.03
  - 5.04
  - 5.05
  - 5.06
  - 5.07
  - 5.08
  - 5.09
  - 5.1
  - 5.11
  - 5.12
  - 5.13
  - 5.14
  - 5.15
  - 5.16
  - 5.17
  - 5.18
  - 5.19
  - 5.2
  - 5.21
  - 5.22
  - 5.23
  - 5.24
  - 5.25
  - 5.26
  - 5.27
  - 5.28
  - 5.29
  - 5.3
  - 5.31
  - 5.32
  - 5.33
  - 5.34
  - 5.35
  - 5.36
  - 5.37
  - 5.38
  - 5.39
  - 5.4
  - 5.41
  - 5.42
  - 5.43
  - 5.44
  - 5.45
  - 5.46
  - 5.47
  - 5.48
  - 5.49
  - 5.5
  - 5.51
  - 5.52
  - 5.53
  - 5.54
  - 5.55
  - 5.56
  - 5.57
  - 5.58
  - 5.59
  - 5.6
  - 5.61
  - 5.62
  - 5.63
  - 5.64
  - 5.65
  - 5.66
  - 5.67
  - 5.68
  - 5.69
  - 5.7
  - 5.71
  - 5.72
  - 5.73
  - 5.74
  - 5.75
  - 5.76
  - 5.77
  - 5.78
  - 5.79
  - 5.8
  - 5.81
  - 5.82
  - 5.83
  - 5.84
  - 5.85
  - 5.86
  - 5.87
  - 5.88
  - 5.89
  - 5.9
  - 5.91
  - 5.92
  - 5.93
  - 5.94
  - 5.95
  - 5.96
  - 5.97
  - 5.98
  - 5.99
- 6～6.9
  - 6
  - 6.01
  - 6.05
  - 6.1
  - 6.2
  - 6.25
  - 6.3
  - 6.35
  - 6.4
  - 6.5
  - 6.57
  - 6.6
  - 6.7
  - 6.75
  - 6.8
  - 6.9
- 7～7.99
  - 7
  - 7.01
  - 7.02
  - 7.03
  - 7.04
  - 7.05
  - 7.06
  - 7.07
  - 7.08
  - 7.09
  - 7.1
  - 7.11
  - 7.12
  - 7.13
  - 7.14
  - 7.15
  - 7.16
  - 7.17
  - 7.18
  - 7.19
  - 7.2
  - 7.21
  - 7.22
  - 7.23
  - 7.24
  - 7.25
  - 7.26
  - 7.27
  - 7.28
  - 7.29
  - 7.3
  - 7.31
  - 7.32
  - 7.33
  - 7.34
  - 7.35
  - 7.36
  - 7.37
  - 7.38
  - 7.39
  - 7.4
  - 7.41
  - 7.42
  - 7.43
  - 7.44
  - 7.45
  - 7.46
  - 7.47
  - 7.48
  - 7.49
  - 7.5
  - 7.51
  - 7.52
  - 7.53
  - 7.54
  - 7.55
  - 7.56
  - 7.57
  - 7.58
  - 7.59
  - 7.6
  - 7.61
  - 7.62
  - 7.63
  - 7.64
  - 7.65
  - 7.66
  - 7.67
  - 7.68
  - 7.69
  - 7.7
  - 7.71
  - 7.72
  - 7.73
  - 7.74
  - 7.75
  - 7.76
  - 7.77
  - 7.78
  - 7.79
  - 7.8
  - 7.81
  - 7.82
  - 7.83
  - 7.84
  - 7.85
  - 7.86
  - 7.87
  - 7.88
  - 7.89
  - 7.9
  - 7.91
  - 7.92
  - 7.93
  - 7.94
  - 7.95
  - 7.96
  - 7.97
  - 7.98
  - 7.99
- 8～8.9
  - 8
  - 8.01
  - 8.02
  - 8.1
  - 8.15
  - 8.2
  - 8.21
  - 8.25
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.75
  - 8.8
  - 8.9
- 9～9.99
  - 9
  - 9.01
  - 9.02
  - 9.03
  - 9.04
  - 9.05
  - 9.06
  - 9.07
  - 9.08
  - 9.09
  - 9.1
  - 9.11
  - 9.12
  - 9.13
  - 9.14
  - 9.15
  - 9.16
  - 9.17
  - 9.18
  - 9.19
  - 9.2
  - 9.21
  - 9.22
  - 9.23
  - 9.24
  - 9.25
  - 9.26
  - 9.27
  - 9.28
  - 9.29
  - 9.3
  - 9.31
  - 9.32
  - 9.33
  - 9.34
  - 9.35
  - 9.36
  - 9.37
  - 9.38
  - 9.39
  - 9.4
  - 9.41
  - 9.42
  - 9.43
  - 9.44
  - 9.45
  - 9.46
  - 9.47
  - 9.48
  - 9.49
  - 9.5
  - 9.51
  - 9.52
  - 9.53
  - 9.54
  - 9.55
  - 9.56
  - 9.57
  - 9.58
  - 9.59
  - 9.6
  - 9.61
  - 9.62
  - 9.63
  - 9.64
  - 9.65
  - 9.66
  - 9.67
  - 9.68
  - 9.69
  - 9.7
  - 9.71
  - 9.72
  - 9.73
  - 9.74
  - 9.75
  - 9.76
  - 9.77
  - 9.78
  - 9.79
  - 9.8
  - 9.81
  - 9.82
  - 9.83
  - 9.84
  - 9.85
  - 9.86
  - 9.87
  - 9.88
  - 9.89
  - 9.9
  - 9.91
  - 9.92
  - 9.93
  - 9.94
  - 9.95
  - 9.96
  - 9.97
  - 9.98
  - 9.99
- 10～10.9
  - 10
  - 10.1
  - 10.15
  - 10.2
  - 10.3
  - 10.4
  - 10.5
  - 10.6
  - 10.7
  - 10.8
  - 10.9
- 11～11.99
  - 11
  - 11.01
  - 11.02
  - 11.03
  - 11.04
  - 11.05
  - 11.06
  - 11.07
  - 11.08
  - 11.09
  - 11.1
  - 11.11
  - 11.12
  - 11.13
  - 11.14
  - 11.15
  - 11.16
  - 11.17
  - 11.18
  - 11.19
  - 11.2
  - 11.21
  - 11.22
  - 11.23
  - 11.24
  - 11.25
  - 11.26
  - 11.27
  - 11.28
  - 11.29
  - 11.3
  - 11.31
  - 11.32
  - 11.33
  - 11.34
  - 11.35
  - 11.36
  - 11.37
  - 11.38
  - 11.39
  - 11.4
  - 11.41
  - 11.42
  - 11.43
  - 11.44
  - 11.45
  - 11.46
  - 11.47
  - 11.48
  - 11.49
  - 11.5
  - 11.51
  - 11.52
  - 11.53
  - 11.54
  - 11.55
  - 11.56
  - 11.57
  - 11.58
  - 11.59
  - 11.6
  - 11.61
  - 11.62
  - 11.63
  - 11.64
  - 11.65
  - 11.66
  - 11.67
  - 11.68
  - 11.69
  - 11.7
  - 11.71
  - 11.72
  - 11.73
  - 11.74
  - 11.75
  - 11.76
  - 11.77
  - 11.78
  - 11.79
  - 11.8
  - 11.81
  - 11.82
  - 11.83
  - 11.84
  - 11.85
  - 11.86
  - 11.87
  - 11.88
  - 11.89
  - 11.9
  - 11.91
  - 11.92
  - 11.93
  - 11.94
  - 11.95
  - 11.96
  - 11.97
  - 11.98
  - 11.99
- 12～12.9
  - 12
  - 12.1
  - 12.2
  - 12.3
  - 12.4
  - 12.5
  - 12.6
  - 12.7
  - 12.8
  - 12.9
- 13～13.9
  - 13
  - 13.1
  - 13.2
  - 13.3
  - 13.4
  - 13.5
  - 13.6
  - 13.7
  - 13.8
  - 13.9
- 14～14.9
  - 14
  - 14.1
  - 14.2
  - 14.3
  - 14.4
  - 14.5
  - 14.6
  - 14.7
  - 14.8
  - 14.9
- 15～15.99
  - 15
  - 15.1
  - 15.2
  - 15.3
  - 15.4
  - 15.5
  - 15.51
  - 15.52
  - 15.53
  - 15.54
  - 15.55
  - 15.56
  - 15.57
  - 15.58
  - 15.59
  - 15.6
  - 15.61
  - 15.62
  - 15.63
  - 15.64
  - 15.65
  - 15.66
  - 15.67
  - 15.68
  - 15.69
  - 15.7
  - 15.71
  - 15.72
  - 15.73
  - 15.74
  - 15.75
  - 15.76
  - 15.77
  - 15.78
  - 15.79
  - 15.8
  - 15.81
  - 15.82
  - 15.83
  - 15.84
  - 15.85
  - 15.86
  - 15.87
  - 15.88
  - 15.89
  - 15.9
  - 15.91
  - 15.92
  - 15.93
  - 15.94
  - 15.95
  - 15.96
  - 15.97
  - 15.98
  - 15.99
- 16～16.9
  - 16
  - 16.1
  - 16.2
  - 16.3
  - 16.4
  - 16.5
  - 16.6
  - 16.7
  - 16.8
  - 16.9
- 17～17.9
  - 17
  - 17.1
  - 17.2
  - 17.3
  - 17.4
  - 17.5
  - 17.6
  - 17.7
  - 17.8
  - 17.9
- 18～18.9
  - 18
  - 18.1
  - 18.2
  - 18.3
  - 18.4
  - 18.5
  - 18.6
  - 18.7
  - 18.8
  - 18.9
- 19～19.99
  - 19
  - 19..5
  - 19.1
  - 19.2
  - 19.3
  - 19.4
  - 19.5
  - 19.51
  - 19.52
  - 19.53
  - 19.54
  - 19.55
  - 19.56
  - 19.57
  - 19.58
  - 19.59
  - 19.6
  - 19.61
  - 19.62
  - 19.63
  - 19.64
  - 19.65
  - 19.66
  - 19.67
  - 19.68
  - 19.69
  - 19.7
  - 19.71
  - 19.72
  - 19.73
  - 19.74
  - 19.75
  - 19.76
  - 19.77
  - 19.78
  - 19.79
  - 19.8
  - 19.81
  - 19.82
  - 19.83
  - 19.84
  - 19.85
  - 19.86
  - 19.87
  - 19.88
  - 19.89
  - 19.9
  - 19.91
  - 19.92
  - 19.93
  - 19.94
  - 19.95
  - 19.96
  - 19.97
  - 19.98
  - 19.99
- 20～20.5
  - 20
  - 20.5
- 21～21.5
  - 21
  - 21.5
- 22～22.5
  - 22
  - 22.5
- 23～23.5
  - 23
  - 23.5
- 24～24.5
  - 24
  - 24.5
- 25～25.5
  - 25
  - 25.5
- 26～26.5
  - 26
  - 26.5
- 27～27.5
  - 27
  - 27.5
- 28～28.5
  - 28
  - 28.5
- 29～29.5
  - 29
  - 29.5
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
Drawing

Clear

Blade length (ℓ)(mm)
- 0.01～0.9
  - 0.01
  - 0.02
  - 0.03
  - 0.04
  - 0.045
  - 0.05
  - 0.06
  - 0.07
  - 0.075
  - 0.08
  - 0.09
  - 0.1
  - 0.105
  - 0.12
  - 0.135
  - 0.15
  - 0.16
  - 0.2
  - 0.23
  - 0.24
  - 0.25
  - 0.3
  - 0.32
  - 0.4
  - 0.45
  - 0.5
  - 0.6
  - 0.7
  - 0.75
  - 0.8
  - 0.9
- 1～1.9
  - 1
  - 1.05
  - 1.1
  - 1.2
  - 1.25
  - 1.3
  - 1.35
  - 1.4
  - 1.5
  - 1.6
  - 1.7
  - 1.75
  - 1.8
  - 1.9
- 2～2.9
  - 2
  - 2.1
  - 2.2
  - 2.25
  - 2.3
  - 2.4
  - 2.5
  - 2.6
  - 2.7
  - 2.8
  - 2.9
- 3～3.9
  - 3
  - 3.1
  - 3.2
  - 3.3
  - 3.4
  - 3.5
  - 3.6
  - 3.7
  - 3.75
  - 3.8
  - 3.9
- 4～4.9
  - 4
  - 4.1
  - 4.2
  - 4.3
  - 4.4
  - 4.5
  - 4.6
  - 4.7
  - 4.8
  - 4.9
- 5～5.9
  - 5
  - 5.1
  - 5.2
  - 5.25
  - 5.3
  - 5.4
  - 5.5
  - 5.6
  - 5.7
  - 5.8
  - 5.9
- 6～6.9
  - 6
  - 6.1
  - 6.2
  - 6.25
  - 6.3
  - 6.4
  - 6.5
  - 6.6
  - 6.7
  - 6.75
  - 6.8
  - 6.9
- 7～7.9
  - 7
  - 7.1
  - 7.2
  - 7.3
  - 7.4
  - 7.5
  - 7.6
  - 7.7
  - 7.8
  - 7.9
- 8～8.9
  - 8
  - 8.1
  - 8.2
  - 8.25
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.8
  - 8.9
- 9～9.9
  - 9
  - 9.1
  - 9.2
  - 9.3
  - 9.4
  - 9.5
  - 9.6
  - 9.7
  - 9.8
  - 9.9
- 10～10.9
  - 10
  - 10.1
  - 10.2
  - 10.3
  - 10.4
  - 10.5
  - 10.6
  - 10.7
  - 10.8
  - 10.9
- 11～11.9
  - 11
  - 11.1
  - 11.2
  - 11.3
  - 11.4
  - 11.5
  - 11.6
  - 11.7
  - 11.8
  - 11.9
- 12～12.9
  - 12
  - 12.2
  - 12.3
  - 12.4
  - 12.5
  - 12.6
  - 12.8
  - 12.9
- 13～13.8
  - 13
  - 13.1
  - 13.2
  - 13.3
  - 13.4
  - 13.5
  - 13.6
  - 13.7
  - 13.8
- 14～14.9
  - 14
  - 14.1
  - 14.2
  - 14.3
  - 14.4
  - 14.5
  - 14.6
  - 14.7
  - 14.8
  - 14.9
- 15～15.9
  - 15
  - 15.2
  - 15.3
  - 15.4
  - 15.5
  - 15.6
  - 15.8
  - 15.9
- 16～16.8
  - 16
  - 16.2
  - 16.4
  - 16.5
  - 16.6
  - 16.8
- 17～17.8
  - 17
  - 17.1
  - 17.2
  - 17.3
  - 17.4
  - 17.5
  - 17.6
  - 17.7
  - 17.8
- 18～18.8
  - 18
  - 18.2
  - 18.3
  - 18.4
  - 18.5
  - 18.6
  - 18.8
- 19～19.8
  - 19
  - 19.2
  - 19.4
  - 19.5
  - 19.6
  - 19.8
- 20～20.8
  - 20
  - 20.1
  - 20.2
  - 20.3
  - 20.4
  - 20.5
  - 20.6
  - 20.7
  - 20.8
- 21～21.9
  - 21
  - 21.2
  - 21.3
  - 21.4
  - 21.5
  - 21.6
  - 21.8
  - 21.9
- 22～22.8
  - 22
  - 22.2
  - 22.4
  - 22.5
  - 22.6
  - 22.8
- 23～23.8
  - 23
  - 23.1
  - 23.2
  - 23.3
  - 23.4
  - 23.5
  - 23.6
  - 23.8
- 24～24.9
  - 24
  - 24.2
  - 24.3
  - 24.4
  - 24.5
  - 24.6
  - 24.8
  - 24.9
- 25～25.8
  - 25
  - 25.2
  - 25.4
  - 25.5
  - 25.6
  - 25.8
- 26～26.8
  - 26
  - 26.2
  - 26.4
  - 26.5
  - 26.6
  - 26.7
  - 26.8
- 27～27.9
  - 27
  - 27.2
  - 27.3
  - 27.4
  - 27.5
  - 27.6
  - 27.8
  - 27.9
- 28～28.8
  - 28
  - 28.2
  - 28.4
  - 28.5
  - 28.8
- 29～29.7
  - 29
  - 29.1
  - 29.2
  - 29.5
  - 29.6
  - 29.7
- 30～30.9
  - 30
  - 30.3
  - 30.4
  - 30.5
  - 30.6
  - 30.8
  - 30.9
- 31～31.8
  - 31
  - 31.2
  - 31.5
  - 31.6
  - 31.8
- 32～32.8
  - 32
  - 32.1
  - 32.4
  - 32.5
  - 32.7
  - 32.8
- 33～33.9
  - 33
  - 33.2
  - 33.3
  - 33.6
  - 33.9
- 34～34.8
  - 34
  - 34.2
  - 34.4
  - 34.5
  - 34.8
- 35～35.7
  - 35
  - 35.1
  - 35.2
  - 35.4
  - 35.5
  - 35.6
  - 35.7
- 36～36.8
  - 36
  - 36.4
  - 36.5
  - 36.8
- 37～37.6
  - 37
  - 37.2
  - 37.5
  - 37.6
- 38～38.8
  - 38
  - 38.4
  - 38.5
  - 38.8
- 39～39.6
  - 39
  - 39.2
  - 39.5
  - 39.6
- 40～40.8
  - 40
  - 40.4
  - 40.5
  - 40.8
- 41～41.6
  - 41
  - 41.2
  - 41.5
  - 41.6
- 42～42.8
  - 42
  - 42.4
  - 42.5
  - 42.8
- 43～43.6
  - 43
  - 43.2
  - 43.5
  - 43.6
- 44～44.8
  - 44
  - 44.4
  - 44.5
  - 44.8
- 45～45.5
  - 45
  - 45.2
  - 45.5
- 46～46.8
  - 46
  - 46.4
  - 46.5
  - 46.8
- 47～47.6
  - 47
  - 47.2
  - 47.5
  - 47.6
- 48～48.5
  - 48
  - 48.5
- 49～49.5
  - 49
  - 49.5
- 50～50.5
  - 50
  - 50.5
- 51～51.5
  - 51
  - 51.5
- 52
- 53～53.5
  - 53
  - 53.5
- 54～54.5
  - 54
  - 54.5
- 55～55.5
  - 55
  - 55.5
- 56
- 57.5
- 58～58.5
  - 58
  - 58.5
- 59～59.5
  - 59
  - 59.5
- 60
- 63
- 64
- 65
- 67
- 70
- 75
- 80
- 83
- 85
- 90
- 95
- 100
- 103
- 106
- 110
- 112
- 120
- 130
- 150
- 200
[4-60/1mm Unit(s)]

Drawing

Clear

Underneck length (ℓ1)(mm)
- 0.1～0.9
  - 0.1
  - 0.2
  - 0.3
  - 0.4
  - 0.5
  - 0.6
  - 0.75
  - 0.8
  - 0.9
- 1～1.9
  - 1
  - 1.1
  - 1.2
  - 1.25
  - 1.3
  - 1.5
  - 1.6
  - 1.7
  - 1.8
  - 1.9
- 2～2.5
  - 2
  - 2.1
  - 2.4
  - 2.5
- 3～3.8
  - 3
  - 3.2
  - 3.5
  - 3.8
- 4～4.5
  - 4
  - 4.5
- 5
- 6
- 7～7.5
  - 7
  - 7.5
- 8
- 9～9.5
  - 9
  - 9.5
- 10～10.5
  - 10
  - 10.5
- 11
- 12～12.5
  - 12
  - 12.5
- 13～13.5
  - 13
  - 13.5
- 14
- 15
- 16～16.5
  - 16
  - 16.5
- 17～17.5
  - 17
  - 17.5
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 60
- 62
- 64
- 65
- 66
- 70
- 74
- 76
- 79
- 80
- 82
- 85
- 94
- 100
- 120
- 125
- 130
- 150
- 200
[15-92/1mm Unit(s)]

Drawing

Clear

Shank diameter (d)(mm)
1

1.5

2

2.90

3

3.175

3.80

4

4.80

5

5.8

6

6.35

6.8

7

7.8

8

8.8

9

9.70

9.8

10

11

11.70

12

13

14

15

15.70

16

17

18

19.70

20

25

30

32

42
Drawing

Clear

Number of flutes(sheet)
1

2

3

4

5

6

8

10

12

14
Clear

Overall Length (L)(mm)
11

13

15

16

18

20

22

25

28

32

35

36

37

38

38.1

39

40

42

43

45

48

49

50

51

52

53

54

55

56

57

58

60

62

63

63.5

65

66

67

68

70

72

73

74

75

76

78

79

80

82

83

84

85

86

87

88

89

90

92

93

94

95

97

99

100

104

105

107

108

109

110

111

113

114

115

117

118

120

121

123

125

126

130

135

140

145

150

155

160

165

170

175

180

190

200

210

220

225

230

240

250

260

270

280

300

310

320

350
Drawing

Clear

work material
- general steel
- Quenched and tempered steel
- High Hardness Steel-HRC55
- High Hardness Steel-HRC60
- High Hardness Steel-HRC65
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
Details

Clear