(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
63,000 Stock items for Same Day Shipping
63,000 Item Stok untuk Pengiriman di Hari yang Sama
Search by Category / Brand
Pencarian dengan
Kategori / Merek
Search by Category Pencarian dengan Kategori
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
- Komponen Mekanis
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Sekrup, Baut, Washer, Nut
- Material
- Komponen Kabel
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Elektrikal & Kontrol
- Peralatan Pemotong
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Peralatan Produksi
- Penanganan Material & Penyimpanan
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Perlengkapan Keamanan & Umum
- Perlengkapan Sanitasi & Lab
- Komponen Press Die
- Komponen Plastik Mold
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Komponen Injeksi Moulding
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Brand Pencarian dengan Merek
This translation is a Google translation Terjemahan ini adalah terjemahan Google
- Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here - Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998
High Helical End Mills (Carbide)
| Days to Ship |
|
|---|
-
Carbide 4-Flute High-Hardness End Mill 55° E168TX
7 LEADERS
[Features]
· High performance 4-flute 55° high torsion end mill for machining high hardness materials with UMG carbide substrate.
· Enables high-efficiency machining in side cutting of high-hardness materials (up to HRC 70).
· Nanoparticle multilayer coating.
· Suitable for machining high-hardness materials from HRC 45 to 70 due to high sheath harness and high initial oxidation temperature.
· Suitable for a wide range of work materials from general steel to high hardness steel.Days to Ship: 10 Day(s) or more -
For Hard Materials, Multi-Flute / Negative Rake Angle / Hard Material Finishing, End Mill (Short)
KYOCERA
End mill for high hardness materials that has achieved long tool lifespan and stable machining.
Days to Ship: 16 Day(s) or more -
Days to Ship: 12 Day(s) or more -
MISUMI
The high precision high helical end mill for shrink fit holder is ideal for side finishing
- Volume Discount
- TS
- General Steel
- Multi-Flutes （5 ~）
- B (Stub)
Days to Ship: 16 Day(s) or more -
TSC series carbide high-helical end mill (cutting edge deflection accuracy of 5 μm or less)
MISUMI
[Features]
·Cutting edge runout accuracy within 5 µm (compared to the manufacturer measurements), back taper within 5 µm, and shank diameter tolerance h5 standards are used, making it ideal for side surface finishing that requires high precision using high-quality tools with little variation in quality
·Designed with blade shape that emphasizes sharpness with positive blade and cutting edge sharp corner suitable for raw material processing such as carbon steel- Volume Discount
- TS
- General Steel
- Multi-Flutes （5 ~）
- R (Regular)
Days to Ship: 16 Day(s) or more -
TSC series carbide high-helical end mill, multi-flute, 53° spiral / short model
MISUMI
[Features]
·In machining of raw material, heat-treated steel, aluminum, etc., pocket standing wall finishing of mold base (main mold), etc., demonstrate strength, thanks to positive rake angle, sharp corners of bottom edge, and 53° strong helix angle
·High tool rigidity minimizes tool tilt during side milling- Volume Discount
- TS
- General Steel
- Multi-Flutes （5 ~）
- S (Short)
Days to Ship: 16 Day(s) or more -
TSC series carbide high-helical end mill, multi-flute, 53° spiral / regular model
MISUMI
[Features]
·In machining of raw material, heat-treated steel, aluminum, etc., pocket standing wall finishing of mold base (main mold), etc., demonstrate strength, thanks to positive rake angle, sharp corners of bottom edge, and 53° strong helix angle
·High tool rigidity minimizes tool tilt during side milling- Volume Discount
- TS
- General Steel
- Multi-Flutes （5 ~）
- R (Regular)
Days to Ship: 16 Day(s) or more -
MISUMI
[Features]
·Designed with tool shape that increases rigid for machining high hardness steel
·Because it is designed with large rake angle, it can be used even on machines where cutting speed does not increase
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.- Volume Discount
- TiAlN
- High-Hardness Steel
- Multi-Flutes （5 ~）
Days to Ship: 16 Day(s) or more -
MISUMI
The expensive long flute type for high hardness is offered at an affordable price
- Volume Discount
- TiAlN
- High-Hardness Steel
- Multi-Flutes （5 ~）
Days to Ship: Same day or more -
MISUMI
Definitive edition of high-hardness steel machining type that combines high durability and low price
- Volume Discount
- SH-b
- High-Hardness Steel
- Multi-Flutes （5 ~）
- R (Regular)
Days to Ship: Same day -
GS MILL Hard Square End Mill GSH6000SF Type
SUMITOMO ELECTRIC HARDMETAL
Adopts an Al-Ti-Cr based laminate coating known as GS Hard Coat with high hardness ultrafine particle-based low Co carbide alloy. Increased oxidation resistance up to 1,100°C, and improved heat and abrasion resistance at extremely high speeds.
Days to Ship: 16 Day(s) or more -
SHE Regular Shank Hard Square End Mill, 6-Flute, OK Hard Coated
OKAZAKI SEIKO
Unique blade type and OK hard coating enable high speed machining of high hardness materials up to 65 HRC.
Days to Ship: 12 Day(s) or more -
SHE6LH Long Shank Hard Square End Mill, 6-Flute, OK Hard Coated
OKAZAKI SEIKO
Long shank type that allows machining in deep sections. Achieves machining of hardened steel up to 65 HRC due to the OK hard coating.
Days to Ship: 12 Day(s) or more -
One Cut Welded Edge End Mill DZ-SEPL
DIJET
Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
Days to Ship: 16 Day(s) or more -
High Helix Square End Mill Regular Multi-Flute (6/8/10-Flute) 3689
GUHRING
The adoption of multiple blades enables ultra-high speed and high precision machining.
Days to Ship: 10 Day(s) or more -
High Helix Square End Mill Long Multi-Flute (6/8/10-Flute) 3691
GUHRING
Suitable for side wall machining in deep locations.
Days to Ship: 16 Day(s) or more -
Square End Mill Regular Multi-Flute (6/8-Flute) for High Hardness Steel 3715
GUHRING
Capable of machining hardened materials of hardness exceeding 60 HRC. Suitable for finishing side surfaces.
Days to Ship: 16 Day(s) or more -
Square End Mill Long Multi-Flute (6/8-Flute) for High Hardness Steel 3716
GUHRING
Capable of machining hardened materials of hardness exceeding 60 HRC. Suitable for side wall machining in deep locations.
Days to Ship: 27 Day(s) or more -
Unequal Lead End Mill For High Efficiency Finishing, Regular, 5-Flute RF100 S/F 6709
GUHRING
With variable division, stable cutting without chattering is possible.
Days to Ship: 27 Day(s) or more -
Unequal Lead End Mill For High Efficiency Finishing, Regular, Multi-Flute (6-Flute) RF100S/F 3631
GUHRING
The adoption of multiple blades enables ultra-high speed and high precision machining.
Days to Ship: 12 Day(s) or more -
For Hard Materials, Multi-Flute / Negative Rake Angle / Hard Material Finishing, End Mill (Medium)
KYOCERA
End mill for high hardness materials that has achieved long tool lifespan and stable machining.
Days to Ship: 16 Day(s) or more -
SPEED/T 3 Flute Anti-Vibration
Poulten&Graf
[Features]
· High helical type with 3-flute blade ideal for grooving.
· Supports high speed processing and large cutting depth with vibration prevention effects due to core thickness change.
· P type T coat has a high thermal oxidation temperature and surface hardness, provides a long life, and has a wide range of compatible work materials.Days to Ship: 16 Day(s) or more -
SPEED/T 4 Flute Anti-Vibration High Border
Poulten&Graf
[Features]
· High helical type focusing on finishing with high speed processing and vibration prevention effects due to core thickness change.
· P type T coat has a high thermal oxidation temperature and surface hardness, and provides a long life.
· Can be used with a wide range of applicable cutting materials.
· Focuses on usability with a long blade length of 30 mm and a blade diameter of ø10.Days to Ship: 10 Day(s) or more -
SPEED/T 3 Flute Z Feed Super High Border for Aluminum
Poulten&Graf
[Features]
· Shape that prevents the cutting edge from chipping / Excellent in processing cutting chips in Z feeding
· Mirror surface finish with high chip discharge performance
· 50° Torsion with High Cuttability
· 3-flute small gash, focusing on finishing
· Low Price 3-Flute TypeDays to Ship: 12 Day(s) or more -
Carbide End Mills Diamond Coated 2 Flutes High Helix Short_DIA-EHDS
OSG
[Features]
· High helix end mill with a torsion angle of 45° and ultra-microcrystalline diamond coating.Days to Ship: 12 Day(s) or more -
Solid Carbide High Helix (45°) End Mill For High Hardnesses (4 Flutes), IC4HST
THE CUT
[Features]
· Demonstrates excellent wear and heat resistance thanks to its special coating geared towards high hardness materials.
· Capable of machining a wide range of workpieces from alloy steel to high hardness steel (HRC55 or lower.)
· The 4 flutes and 45° torsion angle help reduce cutting resistance and provide a quality finished surface.Days to Ship: 16 Day(s) or more -
Solid Carbide High Helix End Mill (6 Flutes) IC6HXE
THE CUT
[Features]
· Outstanding cost performance.
· The special coating improves wear resistance.
· Also good for machining high hardness steel.
· All sizes features 6 flutes.Days to Ship: 16 Day(s) or more -
Days to Ship: 12 Day(s) or more -
Days to Ship: 8 Day(s) or more -
Days to Ship: 12 Day(s) -
Days to Ship: 12 Day(s) or more -
Days to Ship: 8 Day(s) or more -
Days to Ship: 8 Day(s) or more -
Days to Ship: 12 Day(s) -
Days to Ship: 12 Day(s) -
Days to Ship: 12 Day(s) -
Days to Ship: 12 Day(s) -
Days to Ship: 8 Day(s) or more -
Days to Ship: 8 Day(s) or more -
Days to Ship: 8 Day(s) or more -
Days to Ship: 8 Day(s) or more -
Days to Ship: 12 Day(s) or more -
Days to Ship: 12 Day(s) -
Days to Ship: 12 Day(s) or more -
Days to Ship: 12 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Specifications |
| Blade diameter (D)(φ) |
| Blade length (ℓ)(mm) |
| Underneck length (ℓ1)(mm) |
| Shank diameter (d)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| Torsion Angle (θ) |
| Machining Application |
| Coating |
| Blade tip shape |
| Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | 7 LEADERS | KYOCERA | NS TOOL | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | SUMITOMO ELECTRIC HARDMETAL | OKAZAKI SEIKO | OKAZAKI SEIKO | DIJET | GUHRING | GUHRING | GUHRING | GUHRING | GUHRING | GUHRING | KYOCERA | Poulten&Graf | Poulten&Graf | Poulten&Graf | OSG | THE CUT | THE CUT | DIJET | DIJET | DIJET | DIJET | DIJET | DIJET | GUHRING | GUHRING | GUHRING | GUHRING | GUHRING | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA |
| Product Series | For Hard Materials, Multi-Flute / Negative Rake Angle / Hard Material Finishing, End Mill (Short) | TSC series carbide high-helical end mill (cutting edge deflection accuracy of 5 μm or less) | TSC series carbide high-helical end mill, multi-flute, 53° spiral / short model | TSC series carbide high-helical end mill, multi-flute, 53° spiral / regular model | SHE Regular Shank Hard Square End Mill, 6-Flute, OK Hard Coated | SHE6LH Long Shank Hard Square End Mill, 6-Flute, OK Hard Coated | High Helix Square End Mill Regular Multi-Flute (6/8/10-Flute) 3689 | High Helix Square End Mill Long Multi-Flute (6/8/10-Flute) 3691 | Square End Mill Regular Multi-Flute (6/8-Flute) for High Hardness Steel 3715 | Square End Mill Long Multi-Flute (6/8-Flute) for High Hardness Steel 3716 | Unequal Lead End Mill For High Efficiency Finishing, Regular, 5-Flute RF100 S/F 6709 | Unequal Lead End Mill For High Efficiency Finishing, Regular, Multi-Flute (6-Flute) RF100S/F 3631 | For Hard Materials, Multi-Flute / Negative Rake Angle / Hard Material Finishing, End Mill (Medium) | Carbide End Mills Diamond Coated 2 Flutes High Helix Short_DIA-EHDS | Solid Carbide High Helix (45°) End Mill For High Hardnesses (4 Flutes), IC4HST | End Mill for Aluminum and Non-ferrous Metal (3 flutes), 3NESM series | 3D/Highly Efficient Type End Mill (3 flutes/blade length short type), 3ZFK series | High Feeding/Highly Efficient Type Solid End Mill (4 flutes), 4MFK series | |||||||||||||||||||||||||||
| Days to Ship | 10 Day(s) or more | 16 Day(s) or more | 12 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | Same day or more | Same day | 16 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 16 Day(s) or more | 10 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 27 Day(s) or more | 27 Day(s) or more | 12 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 10 Day(s) or more | 12 Day(s) or more | 12 Day(s) or more | 16 Day(s) or more | 16 Day(s) or more | 12 Day(s) or more | 8 Day(s) or more | 12 Day(s) | 12 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 12 Day(s) | 12 Day(s) | 12 Day(s) | 12 Day(s) | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 12 Day(s) or more | 12 Day(s) | 12 Day(s) or more | 12 Day(s) or more |
| Specifications |
|
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||
| Blade diameter (D)(φ) | 3 ～ 20 | 1 ～ 12 | 1 ～ 12 | 3 ～ 12 | 3 ～ 12 | 1 ～ 12 | 1 ～ 20 | 6 ～ 25 | 6 ～ 20 | 6 | 3 ～ 10 | 6 ～ 20 | 6 ～ 20 | 16 ～ 30 | 3 ～ 25 | 6 ～ 25 | 3 ～ 20 | 6 ～ 20 | 4 ～ 25 | 8 ～ 25 | 1 ～ 25 | 3 | 8 ～ 16 | 4 ～ 6 | 10.1 ～ 11.9 | 3 ～ 20 | 6 ～ 12 | 17 ～ 22 | 3 ～ 22 | 3 ～ 25 | 3 ～ 20 | 6 ～ 25 | 3 ～ 30 | 4 ～ 20 | 4 ～ 20 | 8 ～ 20 | 1 ～ 20 | 2 ～ 20 | 3 ～ 13 | 1 ～ 16 | 3 ～ 16 | 3 ～ 20 | 3 ～ 12 | 6 ～ 12 | 3 ～ 16 |
| Blade length (ℓ)(mm) | 8 ～ 38 | 4 ～ 26 | 2.5 ～ 30 | 4.5 ～ 18 | 10 ～ 30 | 2 ～ 24 | 2.5 ～ 45 | 13 ～ 44 | 26 ～ 76 | 15 | 8 ～ 22 | 15 ～ 45 | 15 ～ 45 | 70 ～ 110 | - | - | - | - | 11 ～ 45 | 19 ～ 45 | 5 ～ 53 | 8 | 20 ～ 40 | 12 ～ 18 | 28 | 8 ～ 45 | 15 ～ 30 | 24 ～ 40 | 5 ～ 33 | 5 ～ 38 | 8 ～ 38 | 9 ～ 38 | 11 ～ 85 | 11 ～ 38 | 11 ～ 38 | 19 ～ 38 | 2 ～ 32 | 6 ～ 40 | 3 ～ 8 | 2.5 ～ 32 | 10 ～ 32 | 12 ～ 38 | 6 ～ 26 | 9 ～ 18 | 4.5 ～ 48 |
| Underneck length (ℓ1)(mm) | - | - | - | - | - | 17 ～ 70 | 20 ～ 92 | - | - | - | - | - | - | - | - | - | - | - | 21 ～ 65 | 27 ～ 65 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Shank diameter (d)(mm) | 6 ～ 20 | 6 ～ 12 | 4 ～ 12 | 6 ～ 12 | 6 ～ 12 | 6 ～ 12 | 6 ～ 20 | 6 ～ 25 | 6 ～ 20 | 6 | 6 ～ 10 | 6 ～ 20 | 6 ～ 20 | 16 ～ 32 | 6 ～ 25 | 6 ～ 25 | 6 ～ 20 | 6 ～ 20 | 6 ～ 25 | 8 ～ 25 | 6 ～ 25 | 4 | 8 ～ 16 | 6 | 10 ～ 12 | 4 ～ 20 | 6 ～ 12 | 16 ～ 20 | 4 ～ 20 | 6 ～ 25 | 6 ～ 20 | 4 ～ 25 | 6 ～ 32 | 6 ～ 20 | 6 ～ 20 | 8 ～ 20 | 3 ～ 20 | 4 ～ 20 | 4 ～ 13 | 4 ～ 16 | 6 ～ 16 | 6 ～ 20 | 6 ～ 12 | 6 ～ 12 | 6 ～ 16 |
| Number of flutes(sheet) | 4 | 4 ～ 7 | - | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 6 ～ 8 | 6 ～ 8 | 6 | 6 | 6 | 6 | 6 | 6 ～ 10 | 6 ～ 10 | 6 ～ 8 | 6 ～ 8 | 5 | 6 | 4 ～ 8 | 3 | 4 | 3 | 2 | 4 | 6 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Overall Length (L)(mm) | 50 ～ 100 | 60 ～ 90 | 45 ～ 80 | 50 ～ 75 | 60 ～ 100 | 60 ～ 100 | 60 ～ 130 | 57 ～ 104 | 70 ～ 140 | 60 | 50 ～ 70 | 50 ～ 105 | 80 ～ 150 | 150 ～ 200 | 57 ～ 121 | 75 ～ 150 | 57 ～ 104 | 75 ～ 150 | 57 ～ 121 | 63 ～ 121 | 60 ～ 125 | 50 | 60 ～ 100 | 50 | 75 ～ 80 | 50 ～ 100 | 60 ～ 100 | 125 ～ 220 | 50 ～ 250 | 55 ～ 130 | 60 ～ 125 | 55 ～ 200 | 50 ～ 160 | 57 ～ 104 | 57 ～ 104 | 63 ～ 104 | 38 ～ 104 | 40 ～ 100 | 35 ～ 45 | 45 ～ 90 | 50 ～ 90 | 50 ～ 104 | 50 ～ 75 | 50 ～ 75 | 60 ～ 110 |
| work material | general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] | - | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / Stainless Steel[○] / Cast Iron[○] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / Stainless Steel[○] / Cast Iron[○] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[◎] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[◎] | High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] | - | - | - | - | - | - | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] | Aluminum[○] / Copper[○] | Aluminum[◎] / Copper[◎] / Resin[○] | general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / Stainless Steel[○] | general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[○] | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Torsion Angle (θ) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | - | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Variable lead | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | Powerful Torsion (45°-60°) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Machining Application | Plane / Side / Groove / Countersinking | Plane / Side | - | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side | Plane / Side | Side | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Side | - | - | - | - | - | - | Plane / Side / Groove | Side / Groove / Plunging (Z feed) / Inclined Cuts | Side / Groove / Plunging (Z feed) / Inclined Cuts | Side / Groove / Plunging (Z feed) / Inclined Cuts | - | Side / Groove | Side | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Coating | - | For General Steels (AlCrN, etc.) | - | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | TiAlN | TiAlN | For High Hardness (Silicon Group) | For General Steels (AlCrN, etc.) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | TiAlN | - | - | - | - | - | - | For General Steels (AlCrN, etc.) | - | - | - | Dia Coat | TiAlN | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Blade tip shape | With Lead | With Lead | - | Sharp Edge | Sharp Edge | Sharp Edge | Sharp Edge | With Lead | With Lead | Micro R | With Lead | Sharp Edge | Sharp Edge | Sharp Edge | - | - | - | - | - | - | With Lead | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Type | High Helical | High Helical | - | High Helical | High Helical | High Helical | High Helical | High Helical | High Helical | High Helical | High Helical | Square | Square | High Helical | High Helical | High Helical | High Helical | High Helical | High Helical | High Helical | High Helical | High Helical | High Helical | High Helical | Square | High Helical | High Helical | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Blade diameter (D)(φ)
-
0.1～0.9
- 0.1
- 0.2
- 0.3
- 0.4
- 0.5
- 0.6
- 0.7
- 0.8
- 0.9
-
1～1.9
- 1
- 1.1
- 1.2
- 1.3
- 1.4
- 1.5
- 1.6
- 1.7
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
-
3～3.9
- 3
- 3.1
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.8
- 3.9
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.8
- 4.9
-
5～5.9
- 5
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.1
- 6.2
- 6.3
- 6.4
- 6.5
- 6.6
- 6.7
- 6.8
- 6.9
-
7～7.9
- 7
- 7.1
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 7.9
-
8～8.9
- 8
- 8.1
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.9
- 9
- 9.1
- 9.2
- 9.3
- 9.4
- 9.5
- 9.6
- 9.7
- 9.8
- 9.9
-
10～10.9
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.9
- 11
- 11.1
- 11.2
- 11.3
- 11.4
- 11.5
- 11.6
- 11.7
- 11.8
- 11.9
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
-
Blade length (ℓ)(mm)
-
0.1～0.9
- 0.1
- 0.15
- 0.2
- 0.3
- 0.4
- 0.5
- 0.6
- 0.7
- 0.8
- 0.9
-
1～1.9
- 1
- 1.1
- 1.2
- 1.25
- 1.3
- 1.4
- 1.5
- 1.6
- 1.7
- 1.8
- 1.9
-
2～2.8
- 2
- 2.1
- 2.2
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
-
3～3.9
- 3
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.8
- 3.9
-
4～4.8
- 4
- 4.2
- 4.4
- 4.5
- 4.6
- 4.8
-
5～5.8
- 5
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.6
- 5.7
- 5.8
-
6～6.9
- 6
- 6.2
- 6.3
- 6.4
- 6.6
- 6.7
- 6.8
- 6.9
-
7～7.8
- 7
- 7.2
- 7.4
- 7.5
- 7.6
- 7.8
-
8～8.9
- 8
- 8.1
- 8.2
- 8.3
- 8.4
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.9
- 9
- 9.2
- 9.3
- 9.4
- 9.6
- 9.8
- 9.9
-
10～10.8
- 10
- 10.2
- 10.4
- 10.5
- 10.6
- 10.8
-
11～11.8
- 11
- 11.1
- 11.2
- 11.4
- 11.6
- 11.7
- 11.8
-
12～12.9
- 12
- 12.3
- 12.4
- 12.5
- 12.6
- 12.8
- 12.9
-
13～13.8
- 13
- 13.2
- 13.5
- 13.6
- 13.8
-
14～14.8
- 14
- 14.1
- 14.4
- 14.7
- 14.8
-
15～15.9
- 15
- 15.2
- 15.3
- 15.6
- 15.9
-
16～16.8
- 16
- 16.2
- 16.4
- 16.5
- 16.8
-
17～17.7
- 17
- 17.1
- 17.2
- 17.4
- 17.5
- 17.6
- 17.7
-
18～18.8
- 18
- 18.4
- 18.8
-
19～19.6
- 19
- 19.2
- 19.6
-
20～20.8
- 20
- 20.4
- 20.5
- 20.8
-
21～21.6
- 21
- 21.2
- 21.6
-
22～22.8
- 22
- 22.4
- 22.5
- 22.8
-
23～23.6
- 23
- 23.2
- 23.6
-
24
-
25
-
26
-
27～27.5
- 27
- 27.5
-
28
-
30
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
40
-
42
-
44
-
45
-
46
-
48
-
50
-
53
-
55
-
56
-
60
-
65
-
66
-
70
-
75
-
76
-
85
-
100
-
110
[5-45/1mm Unit(s)]
-
-
Underneck length (ℓ1)(mm)
-
Shank diameter (d)(mm)
-
Number of flutes(sheet)
-
Overall Length (L)(mm)
-
work material
-
Torsion Angle (θ)
-
Machining Application
-
Coating
-
Blade tip shape
-
Type
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to High Helical End Mills (Carbide)
-
Credit Card
Kartu Kredit
-
Bank TransferTransfer Bank
MISUMI Contact
MISUMI Kontak
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy
Thank you for your cooperation.Terima kasih atas kerjasama anda.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy