(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

9.5 Million Products, 1,600 Brands, Free Shipping,
63,000 Stock items for Same Day Shipping

9.5 Juta Produk, 1,600 Merek, Gratis Pengiriman,
63,000 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

Long Neck Square End Mills (Carbide)（Machining Application：Plunging (Z feed)）

14 items

: 30; 45; 60

Days to Ship	All Same day 1 Day(s) or Less 2 Day(s) or Less 8 Day(s) or Less 10 Day(s) or Less 12 Day(s) or Less 13 Day(s) or Less 14 Day(s) or Less 15 Day(s) or Less 16 Day(s) or Less

Micro Grain Carbide End Mills WXL Coated 2 Flutes Long Neck Short_WXL-LN-EDS

OSG

[Features]
· WXL coating with excellent lubrication and wear resistance.
Can be used with a wide range of work materials and cutting applications. Multiple variations available.

Days to Ship: Same day or more
ULTRA WX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Long Neck_WX-LN-EDS

OSG

Ideal for rib groove machining or machining detailed components when there is a problem with interference, etc. Select the effective length according to the processing.

Days to Ship: 12 Day(s) or more
Carbide Long Blade End Mill KSEL-2

KYOWA SEIKO

Carbide long flute length end mill, KSEL-2
·An end mill with 4 to 12 times flute length.
·Helix angle: Standard helix angle (30 to 44°)

Days to Ship: 8 Day(s) or more
TSC series carbide long neck square end mill, 3-flute, 45° spiral / long neck model

MISUMI

[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Multi-function square long neck type with high feed capability and excellent durability
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

Volume Discount

TS

General Steel

3 Flutes
Days to Ship: 18 Day(s) or more
VAC Series Carbide 2-Flute Long Neck Square End Mill

MISUMI

[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Effective for deep cutting due to long neck type
·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted
·Can process heat-treated steel up to 50HRC
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·Coating with excellent lubricity provides stable abrasion resistance and improves shape accuracy of workpiece (VAC coating has weak electrical conductivity. Please be careful when using an electrical tool setter.)
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount
Days to Ship: 16 Day(s) or more
Carbide End Mills DLC Coated 2 Flutes Short with Long Neck_DLC-LN-EDS

OSG

Short-blade, long-neck type end mill with ultra-smooth DLC coating. Demonstrates its abilities when used with rolled aluminum alloys, etc., where welding is a problem.

Days to Ship: 16 Day(s) or more
ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Long Neck (φ6 shank)_FX-LN-EDS-6

OSG

End mill long neck type for high-speed machining that fully draws out the performance of high-speed/high-precision machining centers.

Days to Ship: 16 Day(s) or more
2-Flute, Long Neck Short Type for Copper / Aluminum Alloy / Plastic, CRN-LN-EDS

OSG

Short blade with long neck shape and high rigidity that enables high efficiency, high precision machining even with large blade exposure. Ideal for high-speed / high-precision machining of copper electrodes.

Days to Ship: 12 Day(s) or more
HMS HM Coated 3 to 6 Flute Square [Alteration Supported Product]

UNION TOOL

[Features]
· Can even be used to cut 65 HRC high speed steel material, with outstanding heat resistance temperature and lubricity
· Provides unprecedented long life and can be used for both dry and wet applications

Days to Ship: 12 Day(s) or more
AZS 3-Flute Long Neck Square for Aluminum Processing [Alteration Supported Product]

UNION TOOL

[Features]
· Z-cutting is possible on solid workpieces, reducing pilot hole drilling process time
· Adopts a 45° torsion angle to achieve excellent chip discharge performance
· The blade shape dedicated for aluminum greatly suppresses the generation of burrs
· Tip chipping has been greatly reduced by adopting a micro flat land

Days to Ship: 12 Day(s) or more
DLC-AZS, DLC Coat, 3-Flute Long Neck Square [Alteration Supported Product]

UNION TOOL

[Features]
· Z-cutting is possible on solid workpieces, reducing pilot hole drilling process time
· The DLC coating provides outstanding wear resistance and resistance to weld adhesion
· Adopts a 45° torsion angle to achieve excellent chip discharge performance
· The blade shape dedicated for aluminum greatly suppresses the generation of burrs
· Tip chipping has been greatly reduced by adopting a micro flat land
· O.D. Tolerance: 0/-0.015 (D ≤ 6), 0/-0.005 (D ≥ 8)

Days to Ship: 16 Day(s) or more
SPEED/T Multi-Flute, for High Hardness, Long Blade Length

Poulten&Graf

[Features]
· Can be used with hardened steel up to HRC 65 thanks to its use of highest-grade 200 Nano material as well as a high hardness, highly heat resistant oxidized silicon-based (SI) coating.
· It supports high-speed machining and has a long service life.

Days to Ship: 21 Day(s) or more
2-Blade Pin Angle Sander EM Long

WIDIN

[Features]
· Long two-blade pin square sander EM.
· Supports flexible material and aluminum alloy.

Days to Ship: 12 Day(s) or more
4-Blade Pin Square Sander, EM Long

WIDIN

[Features]
· Long four-blade pin square sander EM.
· Supports flexible material and aluminum alloy.

Days to Ship: 12 Day(s) or more

Days to Ship:	Same day or more

Days to Ship:	12 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	18 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	21 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more


Brand
Product Series
Days to Ship
Specifications
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Torsion Angle (θ)
Machining Application
Coating
Blade tip shape
Type


Brand	OSG	OSG	KYOWA SEIKO	MISUMI	MISUMI	OSG	OSG	OSG	UNION TOOL	UNION TOOL	UNION TOOL	Poulten&Graf	WIDIN	WIDIN
Product Series	Micro Grain Carbide End Mills WXL Coated 2 Flutes Long Neck Short_WXL-LN-EDS	ULTRA WX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Long Neck_WX-LN-EDS	Carbide Long Blade End Mill KSEL-2	TSC series carbide long neck square end mill, 3-flute, 45° spiral / long neck model	VAC Series Carbide 2-Flute Long Neck Square End Mill	Carbide End Mills DLC Coated 2 Flutes Short with Long Neck_DLC-LN-EDS	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Long Neck (φ6 shank)_FX-LN-EDS-6	2-Flute, Long Neck Short Type for Copper / Aluminum Alloy / Plastic, CRN-LN-EDS	HMS HM Coated 3 to 6 Flute Square [Alteration Supported Product]	AZS 3-Flute Long Neck Square for Aluminum Processing [Alteration Supported Product]	DLC-AZS, DLC Coat, 3-Flute Long Neck Square [Alteration Supported Product]	SPEED/T Multi-Flute, for High Hardness, Long Blade Length	2-Blade Pin Angle Sander EM Long	4-Blade Pin Square Sander, EM Long
Days to Ship	Same day or more	12 Day(s) or more	8 Day(s) or more	18 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	12 Day(s) or more	12 Day(s) or more	12 Day(s) or more	16 Day(s) or more	21 Day(s) or more	12 Day(s) or more	12 Day(s) or more
Specifications				TS General Steel 3 Flutes
Blade diameter (D)(φ)	0.1 ～ 12	0.1 ～ 6	0.1 ～ 6	1.5 ～ 5	0.2 ～ 12	0.5 ～ 6	0.5 ～ 2.5	0.5 ～ 12	1 ～ 3	1 ～ 12	1 ～ 12	8 ～ 20	3 ～ 20	5 ～ 16
Blade length (ℓ)(mm)	0.15 ～ 18	0.15 ～ 9	0.3 ～ 60	4.5 ～ 13	0.3 ～ 20	0.7 ～ 9	0.7 ～ 3.7	0.7 ～ 18	2.5 ～ 15	2 ～ 24	2 ～ 24	35 ～ 75	15 ～ 130	25 ～ 80
Underneck length (ℓ1)(mm)	0.3 ～ 60	0.3 ～ 60	-	10 ～ 40	0.5 ～ 50	2.5 ～ 30	2.5 ～ 12.5	2.5 ～ 60	-	3 ～ 50	3 ～ 36	-	-	-
Shank diameter (d)(mm)	4 ～ 12	4 ～ 6	3 ～ 6	6	4 ～ 12	6	6	6 ～ 12	4 ～ 6	4 ～ 12	4 ～ 12	8 ～ 20	3 ～ 20	6 ～ 16
Number of flutes(sheet)	2	2	2	3	2	2	2	2	3	3	3	6 ～ 8	-	-
Overall Length (L)(mm)	45 ～ 140	45 ～ 120	40 ～ 100	50 ～ 60	40 ～ 110	60 ～ 90	60	60 ～ 140	45 ～ 60	60 ～ 110	60 ～ 110	100 ～ 150	60 ～ 250	100 ～ 200
work material	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[○] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Aluminum[○] / Copper[◎] / Resin[◎]	Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	Aluminum[◎] / Copper[○] / Resin[○]	Aluminum[◎] / Copper[○] / Resin[○]	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]
Torsion Angle (θ)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	-	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)
Machining Application	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)	Plunging (Z feed)
Coating	For General Steels (AlCrN, etc.)	TiAlN	Non-Coated	For High Hardness (Silicon Group)	-	DLC	TiAlN	CrN	For High Hardness (Silicon Group)	Non-Coated	DLC	-	TiAlN	TiAlN
Blade tip shape	Sharp Edge / With Lead	Sharp Edge / With Lead	-	With Lead	-	With Lead	Sharp Edge / With Lead	With Lead	With Lead	With Lead	With Lead	-	Sharp Edge	Sharp Edge
Type	Long-Neck Square	Long-Neck Square	Square	Long-Neck Square	Long-Neck Square	Long-Neck Square	Long-Neck Square	Long-Neck Square	Square	Long-Neck Square	Long-Neck Square	Long-Neck Square	High Helical	High Helical

Configure

Specification/Dimensions

Blade diameter (D)(φ)
- 0.1～0.95
  - 0.1
  - 0.15
  - 0.2
  - 0.25
  - 0.3
  - 0.35
  - 0.4
  - 0.45
  - 0.5
  - 0.55
  - 0.6
  - 0.65
  - 0.7
  - 0.75
  - 0.8
  - 0.85
  - 0.9
  - 0.95
- 1～1.95
  - 1
  - 1.05
  - 1.1
  - 1.15
  - 1.2
  - 1.25
  - 1.3
  - 1.35
  - 1.4
  - 1.45
  - 1.5
  - 1.55
  - 1.6
  - 1.65
  - 1.7
  - 1.75
  - 1.8
  - 1.85
  - 1.9
  - 1.95
- 2～2.9
  - 2
  - 2.1
  - 2.2
  - 2.3
  - 2.4
  - 2.5
  - 2.6
  - 2.7
  - 2.8
  - 2.9
- 3～3.9
  - 3
  - 3.1
  - 3.2
  - 3.3
  - 3.4
  - 3.5
  - 3.6
  - 3.7
  - 3.8
  - 3.9
- 4～4.9
  - 4
  - 4.1
  - 4.2
  - 4.3
  - 4.4
  - 4.5
  - 4.6
  - 4.7
  - 4.8
  - 4.9
- 5～5.9
  - 5
  - 5.1
  - 5.2
  - 5.3
  - 5.4
  - 5.5
  - 5.6
  - 5.7
  - 5.8
  - 5.9
- 6～6.9
  - 6
  - 6.1
  - 6.2
  - 6.3
  - 6.4
  - 6.5
  - 6.6
  - 6.7
  - 6.8
  - 6.9
- 7～7.9
  - 7
  - 7.1
  - 7.2
  - 7.3
  - 7.4
  - 7.5
  - 7.6
  - 7.7
  - 7.8
  - 7.9
- 8～8.9
  - 8
  - 8.1
  - 8.2
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.8
  - 8.9
- 9～9.9
  - 9
  - 9.1
  - 9.2
  - 9.3
  - 9.4
  - 9.5
  - 9.6
  - 9.7
  - 9.8
  - 9.9
- 10～10.5
  - 10
  - 10.5
- 11～11.5
  - 11
  - 11.5
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 32
- 35
- 40
- 45
- 50
Drawing

Clear

Blade length (ℓ)(mm)
- 0.08～0.9
  - 0.08
  - 0.1
  - 0.12
  - 0.15
  - 0.2
  - 0.25
  - 0.3
  - 0.4
  - 0.45
  - 0.5
  - 0.55
  - 0.6
  - 0.65
  - 0.7
  - 0.75
  - 0.8
  - 0.9
- 1～1.9
  - 1
  - 1.05
  - 1.1
  - 1.2
  - 1.25
  - 1.3
  - 1.35
  - 1.4
  - 1.5
  - 1.6
  - 1.7
  - 1.75
  - 1.8
  - 1.9
- 2～2.8
  - 2
  - 2.1
  - 2.2
  - 2.25
  - 2.3
  - 2.4
  - 2.5
  - 2.6
  - 2.7
  - 2.8
- 3～3.9
  - 3
  - 3.2
  - 3.3
  - 3.4
  - 3.5
  - 3.6
  - 3.7
  - 3.75
  - 3.8
  - 3.9
- 4～4.8
  - 4
  - 4.2
  - 4.4
  - 4.5
  - 4.6
  - 4.8
- 5～5.8
  - 5
  - 5.1
  - 5.2
  - 5.25
  - 5.3
  - 5.4
  - 5.5
  - 5.6
  - 5.7
  - 5.8
- 6～6.9
  - 6
  - 6.2
  - 6.25
  - 6.3
  - 6.4
  - 6.6
  - 6.7
  - 6.8
  - 6.9
- 7～7.8
  - 7
  - 7.2
  - 7.4
  - 7.5
  - 7.6
  - 7.8
- 8～8.9
  - 8
  - 8.1
  - 8.2
  - 8.3
  - 8.4
  - 8.6
  - 8.7
  - 8.8
  - 8.9
- 9～9.9
  - 9
  - 9.2
  - 9.3
  - 9.4
  - 9.6
  - 9.8
  - 9.9
- 10～10.8
  - 10
  - 10.2
  - 10.4
  - 10.5
  - 10.6
  - 10.8
- 11～11.8
  - 11
  - 11.1
  - 11.2
  - 11.4
  - 11.6
  - 11.7
  - 11.8
- 12～12.9
  - 12
  - 12.3
  - 12.4
  - 12.5
  - 12.6
  - 12.8
  - 12.9
- 13～13.8
  - 13
  - 13.2
  - 13.5
  - 13.6
  - 13.8
- 14～14.8
  - 14
  - 14.1
  - 14.4
  - 14.7
  - 14.8
- 15～15.9
  - 15
  - 15.2
  - 15.3
  - 15.6
  - 15.9
- 16～16.8
  - 16
  - 16.2
  - 16.4
  - 16.5
  - 16.8
- 17～17.7
  - 17
  - 17.1
  - 17.2
  - 17.4
  - 17.5
  - 17.6
  - 17.7
- 18～18.8
  - 18
  - 18.4
  - 18.8
- 19～19.6
  - 19
  - 19.2
  - 19.6
- 20～20.8
  - 20
  - 20.4
  - 20.5
  - 20.8
- 21～21.6
  - 21
  - 21.2
  - 21.6
- 22～22.8
  - 22
  - 22.4
  - 22.5
  - 22.8
- 23～23.6
  - 23
  - 23.2
  - 23.6
- 24
- 25
- 26
- 27～27.5
  - 27
  - 27.5
- 28
- 30
- 32
- 33
- 34
- 35
- 36
- 38
- 40
- 42
- 44
- 45
- 46
- 48
- 50
- 53
- 55
- 56
- 60
- 64
- 65
- 70
- 75
- 80
- 85
- 100
- 115
- 125
- 130
- 150
Drawing

Clear

Underneck length (ℓ1)(mm)
- 0.3～0.8
  - 0.3
  - 0.5
  - 0.75
  - 0.8
- 1～1.5
  - 1
  - 1.5
- 2～2.5
  - 2
  - 2.5
- 3～3.5
  - 3
  - 3.5
- 4～4.5
  - 4
  - 4.5
- 5
- 6
- 7～7.5
  - 7
  - 7.5
- 8～8.5
  - 8
  - 8.5
- 9
- 10～10.5
  - 10
  - 10.5
- 11
- 12～12.5
  - 12
  - 12.5
- 13.5
- 14
- 15
- 16
- 17.5
- 18
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 28
- 29
- 30
- 32
- 35
- 36
- 38
- 39
- 40
- 42
- 45
- 48
- 50
- 52
- 53
- 55
- 60
- 62
- 63
- 70
- 75
- 76
- 80
[10-40/1mm Unit(s)]

Drawing

Clear

Shank diameter (d)(mm)
3

4

5

5.8

6

6.8

7

7.8

8

8.8

9

9.8

10

11

12

13

14

15

16

17

18

20

25

32

42
Drawing

Clear

Number of flutes(sheet)
2

3

4

6

8
Clear

Overall Length (L)(mm)
35

38

40

45

50

55

57

60

63

64

65

70

72

75

76

80

83

85

89

90

92

93

95

100

104

105

108

110

115

120

125

126

130

140

150

160

170

180

185

200

215

220

230

240

250

265
Drawing

Clear

work material
- general steel
- Quenched and tempered steel
- High Hardness Steel-HRC55
- High Hardness Steel-HRC60
- High Hardness Steel-HRC65
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
Details

Clear

Torsion Angle (θ)
- Weak torsion (15 to 25˚)
- Standard torsion (30-40°)
- Powerful Torsion (45°-60°)
- Variable lead
- IKOU
Drawing

Clear

Machining Application
- Plane
- Side
- Groove
- Plunging (Z feed)
- Inclined Cuts
- Countersinking
Images

Clear

Coating
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- TiCN
- DLC
- CrN
- Dia Coat
- Non-Coated
- DG
Details

Clear

Blade tip shape
- Sharp Edge
- With Lead
- C plane
Images

Clear

Type
- Square
- Long-Neck Square
- High Helical
Clear

Narrow search by specifying Manufacturer

- MISUMI (2)
- Economy series (0)
- OSG (5)
- UNION TOOL (3)
- WIDIN (2)
- KYOWA SEIKO (1)
- Poulten&Graf (1)
- SANDVIK (0)
- OKAZAKI SEIKO (0)
- NS TOOL (0)
- KYOCERA (0)
- GUHRING (0)
- VAN HOORN (0)
- DIJET (0)
- NACHI(FUJIKOSHI) (0)
Clear

CAD

- 2D
- 3D
Clear

Related Categories to Long Neck Square End Mills (Carbide)

Top of the page

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

Credit Card Kartu Kredit
Bank TransferTransfer Bank

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Tel:021-8984-0008
Fax:021-8984-0007

Inquiry Permintaan

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

Long Neck Square End Mills (Carbide)（Machining Application：Plunging (Z feed)）

Configure

Specification/Dimensions

Blade diameter (D)(φ)

Blade length (ℓ)(mm)

Underneck length (ℓ1)(mm)

Shank diameter (d)(mm)

Number of flutes(sheet)

Overall Length (L)(mm)

work material

Torsion Angle (θ)

Machining Application

Coating

Blade tip shape

Type

Narrow search by specifying Manufacturer

CAD

Related Categories to Long Neck Square End Mills (Carbide)

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

Long Neck Square End Mills (Carbide)（Machining Application：Plunging (Z feed)）

Configure

Specification/Dimensions

Blade diameter (D)(φ)

Blade length (ℓ)(mm)

Underneck length (ℓ1)(mm)

Shank diameter (d)(mm)

Number of flutes(sheet)

Overall Length (L)(mm)

work material

Torsion Angle (θ)

Machining Application

Coating

Blade tip shape

Type

Narrow search by specifying Manufacturer

CAD

Related Categories to Long Neck Square End Mills (Carbide)

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) *Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) *Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan
Kategori / Merek

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB