(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 8:00 21/4/2024 sampai dengan 5:00 pada tanggal 22/4/2024. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 21/4/2024 to 5:00 (WIB) 22/4/2024. We apologize for the inconvenience.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here

Long Neck Square End Mills (Carbide)(work material:High Hardness Steel-HRC55)

Days to Ship
  • All
  • Same day
  • 1 Day(s) or Less
  • 2 Day(s) or Less
  • 8 Day(s) or Less
  • 10 Day(s) or Less
  • 12 Day(s) or Less
  • 13 Day(s) or Less
  • 14 Day(s) or Less
  • 15 Day(s) or Less
  • 16 Day(s) or Less
  1. 1
Brand
Product Series
Days to Ship
Specifications
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Torsion Angle (θ)
Machining Application
Coating
Blade tip shape
Type

    ULTRA WX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Long Neck_WX-LN-EDS

      GS MILL Long Neck, 2-Flute GSN2

        Micro Grain Carbide End Mills WXL Coated 2 Flutes Long Neck Short_WXL-LN-EDS

          Micro Grain Carbide End Mills WXL Coated 4 Flutes Long Neck Short_WXL-LN-EMS

            HMS HM Coated 3 to 6 Flute Square [Alteration Supported Product]

              TiAlN Coat, Carbide long neck square end mill, 2 flutes

                TSC series carbide long neck square end mill, 3-flute, 45° spiral / long neck model

                  VAC Series Carbide 2-Flute Long Neck Square End Mill

                    GS MILL Long Neck, 4-Flute GSN4

                      ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Long Neck (φ6 shank)_FX-LN-EDS-6

                        ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes Short with Long Neck (φ6 shank)_FX-LN-EMS-6

                          ULTRA WX Micro Grain Carbide End Mills TiAIN coated 4 Flutes Long Neck Short_WX-LN-EMS

                            HLS2000 HM Coated 2-Flute Long Neck Square [Alteration Supported Product]

                              HLS4000 HM Coated 4-Flute Long Neck Square

                                C-CES2000, UT Coat, 2-Flute Square [Alteration Supported Product]

                                  C-CES2000S UT Coat 2-Flutes Square (Sharp Corner) [Alteration Supported Product]

                                    C-CER UT Coat, 2-Flute Deep Rib Square [Alteration Supported Product]

                                      C-CES4000, UT Coat, 4-Flute Square [Alteration Supported Product]

                                        C-CES4000S UT Coated 4-Flute Square End Mill (Sharp Corner) [Alteration Supported Product]

                                          MHRH230 2-Flute Long Neck End Mill for High-Hardness

                                            MHRH430 4-Flute Long Neck End Mill for High-Hardness

                                              MHR230 MUGEN-COATING 2-Flute Long Neck End Mill (for Deep Ribbing)

                                                CXS UT Coat 4-Flute Long Neck Square Unequal Split/Unequal Lead

                                                  X Coated 2-Flute Long Neck End Mill (For deep rib) NHR-2X

                                                    MHR430 MUGEN-COATING 4-Flute Long Neck End Mill (for Deep Ribbing)

                                                      TiAlN Coat, Carbide long neck square end mill, 4 flutes

                                                        SPEED/T Multi-Flute, for High Hardness, Long Blade Length

                                                          MHRLN230-6 MUGEN-COATING Long Neck End Mill ø6 Shank Diameter Type (For Deep Ribbing)

                                                          Brand

                                                          OSG

                                                          NACHI(FUJIKOSHI)

                                                          OSG

                                                          OSG

                                                          UNION TOOL

                                                          VAN HOORN

                                                          MISUMI

                                                          MISUMI

                                                          NACHI(FUJIKOSHI)

                                                          OSG

                                                          OSG

                                                          OSG

                                                          UNION TOOL

                                                          UNION TOOL

                                                          UNION TOOL

                                                          UNION TOOL

                                                          UNION TOOL

                                                          UNION TOOL

                                                          UNION TOOL

                                                          NS TOOL

                                                          NS TOOL

                                                          NS TOOL

                                                          UNION TOOL

                                                          NS TOOL

                                                          NS TOOL

                                                          VAN HOORN

                                                          Poulten&Graf

                                                          NS TOOL

                                                          Product Series

                                                          ULTRA WX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Long Neck_WX-LN-EDS

                                                          GS MILL Long Neck, 2-Flute GSN2

                                                          Micro Grain Carbide End Mills WXL Coated 2 Flutes Long Neck Short_WXL-LN-EDS

                                                          Micro Grain Carbide End Mills WXL Coated 4 Flutes Long Neck Short_WXL-LN-EMS

                                                          HMS HM Coated 3 to 6 Flute Square [Alteration Supported Product]

                                                          TiAlN Coat, Carbide long neck square end mill, 2 flutes

                                                          TSC series carbide long neck square end mill, 3-flute, 45° spiral / long neck model

                                                          VAC Series Carbide 2-Flute Long Neck Square End Mill

                                                          GS MILL Long Neck, 4-Flute GSN4

                                                          ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Long Neck (φ6 shank)_FX-LN-EDS-6

                                                          ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes Short with Long Neck (φ6 shank)_FX-LN-EMS-6

                                                          ULTRA WX Micro Grain Carbide End Mills TiAIN coated 4 Flutes Long Neck Short_WX-LN-EMS

                                                          HLS2000 HM Coated 2-Flute Long Neck Square [Alteration Supported Product]

                                                          HLS4000 HM Coated 4-Flute Long Neck Square

                                                          C-CES2000, UT Coat, 2-Flute Square [Alteration Supported Product]

                                                          C-CES2000S UT Coat 2-Flutes Square (Sharp Corner) [Alteration Supported Product]

                                                          C-CER UT Coat, 2-Flute Deep Rib Square [Alteration Supported Product]

                                                          C-CES4000, UT Coat, 4-Flute Square [Alteration Supported Product]

                                                          C-CES4000S UT Coated 4-Flute Square End Mill (Sharp Corner) [Alteration Supported Product]

                                                          MHRH230 2-Flute Long Neck End Mill for High-Hardness

                                                          MHRH430 4-Flute Long Neck End Mill for High-Hardness

                                                          MHR230 MUGEN-COATING 2-Flute Long Neck End Mill (for Deep Ribbing)

                                                          CXS UT Coat 4-Flute Long Neck Square Unequal Split/Unequal Lead

                                                          X Coated 2-Flute Long Neck End Mill (For deep rib) NHR-2X

                                                          MHR430 MUGEN-COATING 4-Flute Long Neck End Mill (for Deep Ribbing)

                                                          TiAlN Coat, Carbide long neck square end mill, 4 flutes

                                                          SPEED/T Multi-Flute, for High Hardness, Long Blade Length

                                                          MHRLN230-6 MUGEN-COATING Long Neck End Mill ø6 Shank Diameter Type (For Deep Ribbing)

                                                          Days to Ship 12 Day(s) or more 16 Day(s) or more Same day or more Same day or more 12 Day(s) or more 16 Day(s) or more 10 Day(s) or more 16 Day(s) or more 16 Day(s) or more 16 Day(s) or more 16 Day(s) or more 12 Day(s) or more 12 Day(s) or more 12 Day(s) or more 12 Day(s) or more 16 Day(s) or more 12 Day(s) or more 12 Day(s) or more 16 Day(s) or more 12 Day(s) or more 12 Day(s) or more 16 Day(s) or more 8 Day(s) or more 10 Day(s) or more 16 Day(s) or more 16 Day(s) or more 21 Day(s) or more 16 Day(s) or more
                                                          Specifications
                                                                      • TS
                                                                      • General Steel
                                                                      • 3 Flutes
                                                                                                                Blade diameter (D)(φ)0.1 ~ 60.2 ~ 60.1 ~ 121 ~ 101 ~ 120.8 ~ 31 ~ 60.2 ~ 121 ~ 100.5 ~ 2.51 ~ 61 ~ 100.1 ~ 61 ~ 60.1 ~ 200.2 ~ 120.2 ~ 61 ~ 201 ~ 120.1 ~ 31 ~ 60.1 ~ 61 ~ 120.5 ~ 2.51 ~ 100.2 ~ 28 ~ 200.3 ~ 2
                                                                                                                Blade length (ℓ)(mm)0.15 ~ 90.3 ~ 90.15 ~ 181.5 ~ 152.5 ~ 561.2 ~ 31.5 ~ 130.3 ~ 201.5 ~ 150.7 ~ 3.71.5 ~ 91.5 ~ 150.1 ~ 91 ~ 60.15 ~ 480.3 ~ 360.3 ~ 92.5 ~ 482.5 ~ 260.08 ~ 4.50.8 ~ 90.15 ~ 91.5 ~ 180.7 ~ 3.71.5 ~ 150.3 ~ 335 ~ 750.4 ~ 3
                                                                                                                Underneck length (ℓ1)(mm)0.3 ~ 600.5 ~ 600.3 ~ 604 ~ 80--4 ~ 600.5 ~ 504 ~ 802.5 ~ 12.55 ~ 304 ~ 800.3 ~ 604 ~ 50--0.5 ~ 60--0.3 ~ 504 ~ 500.3 ~ 603 ~ 622 ~ 204 ~ 80--3 ~ 15
                                                                                                                Shank diameter (d)(mm)4 ~ 64 ~ 64 ~ 124 ~ 104 ~ 1264 ~ 64 ~ 124 ~ 10664 ~ 104 ~ 64 ~ 63 ~ 204 ~ 124 ~ 64 ~ 204 ~ 124 ~ 64 ~ 64 ~ 64 ~ 123 ~ 44 ~ 1068 ~ 20-
                                                                                                                Number of flutes(sheet)22243 ~ 62324244242224424242446 ~ 8-
                                                                                                                Overall Length (L)(mm)45 ~ 12045 ~ 12045 ~ 14045 ~ 15045 ~ 1206450 ~ 10040 ~ 11050 ~ 1506060 ~ 9045 ~ 15045 ~ 12050 ~ 11038 ~ 11045 ~ 9045 ~ 12045 ~ 11045 ~ 7545 ~ 10050 ~ 11045 ~ 12050 ~ 11035 ~ 6050 ~ 15064100 ~ 150-
                                                                                                                work materialHigh Hardness Steel-HRC55[◎]High Hardness Steel-HRC55[◎]High Hardness Steel-HRC55[○]High Hardness Steel-HRC55[○]High Hardness Steel-HRC55[◎]High Hardness Steel-HRC55[◎]High Hardness Steel-HRC55[○]High Hardness Steel-HRC55[○]High Hardness Steel-HRC55[◎]High Hardness Steel-HRC55[◎]High Hardness Steel-HRC55[◎]High Hardness Steel-HRC55[○]High Hardness Steel-HRC55[◎]High Hardness Steel-HRC55[◎]High Hardness Steel-HRC55[○]High Hardness Steel-HRC55[○]High Hardness Steel-HRC55[○]High Hardness Steel-HRC55[○]High Hardness Steel-HRC55[○]High Hardness Steel-HRC55[◎]High Hardness Steel-HRC55[◎]High Hardness Steel-HRC55[◎]High Hardness Steel-HRC55[○]High Hardness Steel-HRC55[○]High Hardness Steel-HRC55[◎]High Hardness Steel-HRC55[◎]High Hardness Steel-HRC55[○]High Hardness Steel-HRC55[◎]
                                                                                                                Torsion Angle (θ)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Powerful Torsion (45°-60°)-Powerful Torsion (45°-60°)-Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°) / IKOUStandard torsion (30-40°) / Powerful Torsion (45°-60°)Standard torsion (30-40°)-Powerful Torsion (45°-60°)Standard torsion (30-40°)
                                                                                                                Machining ApplicationPlane / Side / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Groove / Inclined CutsPlane / Side / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Groove / Inclined CutsPlane / Side / Groove / Plunging (Z feed) / Inclined Cuts-Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / CountersinkingPlane / Side / Groove / Plunging (Z feed) / Inclined Cuts / CountersinkingPlane / Side / Groove / Inclined CutsPlane / Side / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Groove / Inclined CutsPlane / Side / Groove / Inclined CutsPlane / Side / Groove / Inclined CutsPlane / Side / Groove / Inclined CutsPlane / Side / Groove / Inclined CutsPlane / Side / Groove / Inclined CutsPlane / Side / Groove / Inclined CutsPlane / Side / Groove / Inclined CutsPlane / Side / Groove / Inclined CutsPlane / Side / Groove / Inclined CutsPlane / Side / Groove / Inclined CutsPlane / Side / Groove / Inclined CutsPlane / Side / Groove / Inclined CutsPlane / Side / GroovePlane / Side / Groove / Inclined Cuts-Groove / Plunging (Z feed)Plane / Side / Groove
                                                                                                                CoatingTiAlNTiAlNFor General Steels (AlCrN, etc.)For General Steels (AlCrN, etc.)For High Hardness (Silicon Group)TiAlNFor High Hardness (Silicon Group)-TiAlNTiAlNTiAlNTiAlNFor High Hardness (Silicon Group)For High Hardness (Silicon Group)TiCNTiCNTiCNTiCNTiCNFor High Hardness (Silicon Group)For High Hardness (Silicon Group)TiAlNFor General Steels (AlCrN, etc.)TiCNTiAlNTiAlN-TiAlN
                                                                                                                Blade tip shapeSharp Edge / With LeadSharp EdgeSharp Edge / With LeadWith LeadWith Lead-With Lead-Sharp EdgeSharp Edge / With LeadSharp Edge / With LeadWith LeadWith LeadWith LeadWith LeadSharp EdgeWith LeadWith LeadSharp EdgeWith LeadWith LeadWith LeadWith LeadWith LeadWith Lead---
                                                                                                                TypeLong-Neck SquareLong-Neck SquareLong-Neck SquareLong-Neck SquareSquareLong-Neck SquareLong-Neck SquareLong-Neck SquareLong-Neck SquareLong-Neck SquareLong-Neck SquareLong-Neck SquareLong-Neck SquareLong-Neck SquareSquareSquareLong-Neck SquareSquareSquareLong-Neck SquareLong-Neck SquareLong-Neck SquareLong-Neck SquareLong-Neck SquareLong-Neck SquareLong-Neck SquareLong-Neck SquareSquare

                                                                                                                Loading...

                                                                                                                1. 1

                                                                                                                Related Categories to Long Neck Square End Mills (Carbide)