(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

9.5 Million Products, 1,600 Brands, Free Shipping,
63,000 Stock items for Same Day Shipping

9.5 Juta Produk, 1,600 Merek, Gratis Pengiriman,
63,000 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

Carbide Ball End Mills（R Precision：±0.005）

An online store for carbide ball end mills. Divided into categories of normal ball end mill and long neck ball end mill. In MISUMI's e catalog, specifications/dimensions (size) of radius size, compatible work materials, blade length, number of blades, neck length, total length, coating, etc. can be selected with one click so you can easily find the desired carbide ball end mill
[What is a carbide ball end mill?]
A type of milling cutter. An end mill characterized by a bottom flute with a spherical (round) cutting edge, mainly used for cutting free-form surface shapes. Its main role is cutting molded parts. Due to the spherical cutting edge, it has features that can support various machining shapes.

Search by specifying the lower class category

19 items

: 30; 45; 60

Days to Ship	All Same day 1 Day(s) or Less 2 Day(s) or Less 8 Day(s) or Less 10 Day(s) or Less 11 Day(s) or Less 12 Day(s) or Less 13 Day(s) or Less 15 Day(s) or Less 16 Day(s) or Less

MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Regular Model

MISUMI

The user friendly regular flute length type is released simultaneously

Volume Discount

MR

General Steel

2 Flutes

R (Regular)
Days to Ship: 16 Day(s) or more
Ball End Type, 2-Flute WXL-EBD

OSG

[Features]
· High-accuracy ball end mill coated with WXL hard lubricating film coating.
Proven performance on a wide range of work materials.
Long life regardless of whether being used for dry-type or wet-type machining.

Days to Ship: 2 Day(s) or more
TSC Series Carbide Tapered Neck Ball End Mill, for High-Hardness Steel, 3-Flute / Tapered Neck Model

MISUMI

[Features]
·3-flute, short-flute length shape is used to resist chattering and enable high-feed machining
·Taper neck is effective in suppressing chattering
·Machining of high hardness steel up to 65HRC is possible
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

High-Hardness Steel

3 Flutes
Days to Ship: 16 Day(s) or more
TSC series carbide ball end mill, for shrinkage fitting, 2-flute / stub model

MISUMI

[Features]
·Compatible with shrink fit chucks for high-precision machining
·Designed with short flute length and overall length for shrink fit and emphasis on rigidity
It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

Volume Discount

TS

General Steel

2 Flutes

B (Stub)
Days to Ship: 16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	2 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

On Sale Till 31/03/2025

(Economy series) XAL series carbide ball end mill, 2-flute / short model

MISUMI

XAL Series is the definitive choice for cost-sensitive customers

Volume Discount

XAL
General Steel
2 Flutes

	Special Price
Days to Ship:	Same day or more

TSC Series Carbide Ball End Mill 2-Flute / Short Type

MISUMI

[Features]
·Good finish can be expected for surface coarse of workpiece after processing
It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

2 Flutes

S (Short)
Days to Ship: 16 Day(s) or more
TSC series carbide ball end mill, regular model

MISUMI

[Features]
·Regular bridge length allows for many regrinding times
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

2 Flutes

R (Regular)
Days to Ship: 16 Day(s) or more
TSC series carbide ball end mill, 2-flute / short, long shank model

MISUMI

[Features]
·Long shank type ideal for deep cavity milling
It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

2 Flutes

S (Short)
Days to Ship: 16 Day(s) or more
TSC series carbide tapered neck ball end mill, 2-flute / tapered neck model

MISUMI

[Features]
·High stiffness 2-flute type with length taper shape
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

2 Flutes
Days to Ship: 16 Day(s) or more
TSC series carbide tapered neck ball end mill, 3-flute / tapered neck model

MISUMI

[Features]
·High-feed, high stiffness 3-flute taper shape with taper length
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

3 Flutes
Days to Ship: 16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

On Sale Till 31/03/2025

TSC series carbide long neck ball end mill, 2-flute / long neck model

MISUMI

[Features]
·Long neck shape suitable for deep cavity milling
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS
General Steel
2 Flutes

	Special Price
Days to Ship:	Same day or more

TSC series carbide long neck ball end mill, 3-flute / long neck model

MISUMI

[Features]
·Long neck ball 3-flute type suitable for high-feed machining of deep cutting areas
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

3 Flutes
Days to Ship: 16 Day(s) or more
TSC series carbide long neck ball end mill, 4-flute / long neck model

MISUMI

[Features]
·Long neck ball 4-flute type suitable for high-feed machining of deep cutting areas
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

TS

General Steel

4 Flutes
Days to Ship: 16 Day(s) or more
CRN Coated Carbide Long Neck Ball End Mill for Copper Electrode Machining, 2-Flute / Stub, Long Neck Model

MISUMI

CrN coated products that are ideal for copper electrode processing are available at affordable prices

Volume Discount

CrN

Copper

2 Flutes
Days to Ship: 16 Day(s) or more
XAL Series Carbide Long Neck Ball End Mill, 2-Flute / Stub, Long Neck Model

MISUMI

A significant number of specifications has been added to the XAL series that can be widely used for everything from general steel to copper

Volume Discount

XAL

General Steel

2 Flutes
Days to Ship: 16 Day(s) or more
CBN Ball End Mill, 2-Flute

MISUMI

CBN ball end mill that's ideal for precision finishing is available at a value price

Volume Discount

High-Hardness Steel

2 Flutes
Days to Ship: 16 Day(s) or more
MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Short Model

MISUMI

High-performance products with emphasis on the machined surface accuracy are available in the deferred prices of the conventional products!

Volume Discount

MR

General Steel

2 Flutes

S (Short)
Days to Ship: 16 Day(s) or more
MRC Series Carbide Long Neck Ball End Mill, 2-Flute / Long Neck Model

MISUMI

High-performance MRC series is available in the industry's largest number of sizes

Volume Discount

MR

General Steel

2 Flutes

S (Short)
Days to Ship: 16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

On Sale Till 31/03/2025

(Economy series) XAL Series Carbide Ball End Mill, 2-Flute / Regular Model

MISUMI

The regular flute length type is introduced in the low-price and popular XAL balls

Volume Discount

XAL
General Steel
2 Flutes

	Special Price
Days to Ship:	16 Day(s) or more


Brand
Product Series
Days to Ship
Specifications
R Size(mm)
Blade length (ℓ)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
R Precision(μm)
Machining Application
Coating
Type

					On Sale Till 31/03/2025						On Sale Till 31/03/2025								On Sale Till 31/03/2025
Brand	MISUMI	OSG	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI
Product Series	MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Regular Model	Ball End Type, 2-Flute WXL-EBD	TSC Series Carbide Tapered Neck Ball End Mill, for High-Hardness Steel, 3-Flute / Tapered Neck Model	TSC series carbide ball end mill, for shrinkage fitting, 2-flute / stub model	(Economy series) XAL series carbide ball end mill, 2-flute / short model	TSC Series Carbide Ball End Mill 2-Flute / Short Type	TSC series carbide ball end mill, regular model	TSC series carbide ball end mill, 2-flute / short, long shank model	TSC series carbide tapered neck ball end mill, 2-flute / tapered neck model	TSC series carbide tapered neck ball end mill, 3-flute / tapered neck model	TSC series carbide long neck ball end mill, 2-flute / long neck model	TSC series carbide long neck ball end mill, 3-flute / long neck model	TSC series carbide long neck ball end mill, 4-flute / long neck model	CRN Coated Carbide Long Neck Ball End Mill for Copper Electrode Machining, 2-Flute / Stub, Long Neck Model	XAL Series Carbide Long Neck Ball End Mill, 2-Flute / Stub, Long Neck Model	CBN Ball End Mill, 2-Flute	MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Short Model	MRC Series Carbide Long Neck Ball End Mill, 2-Flute / Long Neck Model	(Economy series) XAL Series Carbide Ball End Mill, 2-Flute / Regular Model
Days to Ship	16 Day(s) or more	2 Day(s) or more	16 Day(s) or more	16 Day(s) or more	Same day or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	Same day or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more
Specifications	MR General Steel 2 Flutes R (Regular)		TS High-Hardness Steel 3 Flutes	TS General Steel 2 Flutes B (Stub)	XAL General Steel 2 Flutes	TS General Steel 2 Flutes S (Short)	TS General Steel 2 Flutes R (Regular)	TS General Steel 2 Flutes S (Short)	TS General Steel 2 Flutes	TS General Steel 3 Flutes	TS General Steel 2 Flutes	TS General Steel 3 Flutes	TS General Steel 4 Flutes	CrN Copper 2 Flutes	XAL General Steel 2 Flutes	High-Hardness Steel 2 Flutes	MR General Steel 2 Flutes S (Short)	MR General Steel 2 Flutes S (Short)	XAL General Steel 2 Flutes
R Size(mm)	0.2 ～ 6	0.05 ～ 2.75	0.5 ～ 2	0.2 ～ 2.5	0.05 ～ 2.75	0.05 ～ 2.75	0.2 ～ 2.5	0.5 ～ 2.5	0.15 ～ 2	0.5 ～ 2	0.05 ～ 2.5	0.5 ～ 2	1 ～ 2	0.2 ～ 2	0.05 ～ 2.5	0.3 ～ 1	0.1 ～ 6	0.05 ～ 3	0.2 ～ 2.5
Blade length (ℓ)(mm)	1.5 ～ 22	0.2 ～ 12	0.8 ～ 3.2	0.4 ～ 5	0.2 ～ 12	0.2 ～ 8	1.5 ～ 12	2 ～ 8	0.3 ～ 4	0.8 ～ 6	0.07 ～ 8	0.8 ～ 3.2	1.6 ～ 6	0.4 ～ 4	0.07 ～ 5	0.5 ～ 1.2	0.4 ～ 15	0.07 ～ 6	1.5 ～ 15
Underneck length (ℓ1)(mm)	-	-	15 ～ 50	-	-	-	-	-	2 ～ 50	7 ～ 60	0.2 ～ 60	3 ～ 50	4 ～ 30	2 ～ 40	0.2 ～ 60	1.5 ～ 5	-	0.2 ～ 60	-
Shank diameter (d)(mm)	4 ～ 12	4 ～ 6	4 ～ 6	4 ～ 6	3 ～ 6	3 ～ 6	4 ～ 6	3 ～ 6	4 ～ 6	4 ～ 6	3 ～ 8	4 ～ 6	4 ～ 6	4 ～ 6	3 ～ 6	4	4 ～ 12	4 ～ 6	4 ～ 6
Number of flutes(sheet)	2	2	3	2	2	2	2	2	2	3	2	2 ～ 3	4	2	2	2	2	2	2
Overall Length (L)(mm)	50 ～ 110	40 ～ 80	50 ～ 110	40	40 ～ 80	40 ～ 60	50 ～ 80	70 ～ 100	50 ～ 110	50 ～ 110	40 ～ 110	50 ～ 110	50 ～ 70	50 ～ 110	50 ～ 110	50	50 ～ 110	50 ～ 110	50 ～ 80
work material	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]
R Precision(μm)	±0.005	±0.005	±0.005	±0.005	±0.005	±0.005	±0.005	±0.005	±0.005	±0.005	±0.005	±0.005	±0.005	±0.005	±0.005	±0.005	±0.005	±0.005	±0.005
Machining Application	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove
Coating	MRC	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	CrN	For General Steels (AlCrN, etc.)	Non-Coated	MRC	MRC	For General Steels (AlCrN, etc.)
Type	Ball	Ball	Tapered neck ball	Ball	Ball	Ball	Ball	Ball	Tapered neck ball	Tapered neck ball	Long-Neck Ball	Long-Neck Ball	Long-Neck Ball	Long-Neck Ball	Long-Neck Ball	Ball	Ball	Long-Neck Ball	Ball

Configure

Specification/Dimensions

R Size(mm)
0.005

0.01

0.015

0.02

0.025

0.03

0.04

0.05

R0.05

0.075

0.1

R0.1

0.125

0.15

R0.15

0.175

0.2

R0.2

0.225

0.25

R0.25

0.27

0.275

0.3

R0.3

0.325

0.35

R0.35

0.375

0.4

R0.4

0.425

0.45

R0.45

0.475

0.5

R0.5

0.55

R0.55

0.6

R0.6

0.65

R0.65

0.7

R0.7

0.75

R0.75

0.8

R0.8

0.85

R0.85

0.9

R0.9

0.95

R0.95

1

R1

1.05

1.1

1.15

1.2

1.25

R1.25

1.3

1.35

1.4

1.45

1.5

R1.5

1.55

1.6

1.65

1.7

1.75

R1.75

1.8

1.85

1.9

1.95

2

R2

2.05

2.1

2.15

2.2

2.25

R2.25

2.3

2.35

2.4

2.45

2.5

R2.5

2.55

2.6

2.65

2.7

2.75

R2.75

2.8

2.85

2.9

2.95

3

R3

R 3.0

3.05

3.1

3.15

3.175

3.2

3.25

R3.25

3.3

3.35

3.4

3.45

3.5

R3.5

3.55

3.6

3.65

3.7

3.75

R3.75

3.8

3.85

3.9

3.95

4

R4

4.05

4.1

4.15

4.2

4.25

R4.25

4.3

4.35

4.4

4.45

4.5

R4.5

4.55

4.6

4.65

4.7

4.75

4.8

4.85

4.9

4.95

5

R5

5.05

5.1

5.15

5.2

5.25

5.3

5.35

5.4

5.45

5.5

R5.5

5.55

5.6

5.65

5.7

5.75

5.8

5.85

5.9

5.95

6

R6

6.05

6.1

6.15

6.2

6.25

6.3

6.35

6.4

6.45

6.5

6.55

6.6

6.65

6.7

6.75

6.8

6.85

6.9

6.95

7

R7

7.05

7.1

7.15

7.2

7.25

7.3

7.35

7.4

7.45

7.5

7.55

7.6

7.65

7.7

7.75

7.8

7.85

7.9

7.95

8

R8

8.05

8.1

8.15

8.2

8.25

8.3

8.35

8.4

8.45

8.5

8.55

8.6

8.65

8.7

8.75

8.8

8.85

8.9

8.95

9

R9

9..5

9.05

9.1

9.15

9.2

9.25

9.3

9.35

9.4

9.45

9.5

9.55

9.6

9.65

9.7

9.75

9.8

9.85

9.9

9.95

10

R10

10.25

10.5

10.75

11

11.5

12

12.25

12.5

12.75

13

13.5

14

14.5

15

15.5

16

16.5

17

17.5

18

18.5

19

19.5

20

22.0

22.5

23.0

24.0

25
Drawing

Clear

Blade length (ℓ)(mm)
- 0.01～0.96
  - 0.01
  - 0.02
  - 0.03
  - 0.04
  - 0.05
  - 0.06
  - 0.07
  - 0.08
  - 0.1
  - 0.12
  - 0.14
  - 0.15
  - 0.16
  - 0.2
  - 0.21
  - 0.23
  - 0.24
  - 0.25
  - 0.28
  - 0.3
  - 0.32
  - 0.35
  - 0.37
  - 0.38
  - 0.4
  - 0.42
  - 0.45
  - 0.48
  - 0.49
  - 0.5
  - 0.56
  - 0.6
  - 0.63
  - 0.64
  - 0.65
  - 0.7
  - 0.72
  - 0.75
  - 0.76
  - 0.8
  - 0.84
  - 0.9
  - 0.95
  - 0.96
- 1～1.9
  - 1
  - 1.05
  - 1.1
  - 1.12
  - 1.2
  - 1.25
  - 1.26
  - 1.28
  - 1.3
  - 1.35
  - 1.4
  - 1.44
  - 1.45
  - 1.5
  - 1.6
  - 1.7
  - 1.75
  - 1.8
  - 1.9
- 2～2.9
  - 2
  - 2.1
  - 2.2
  - 2.25
  - 2.3
  - 2.4
  - 2.5
  - 2.6
  - 2.7
  - 2.75
  - 2.8
  - 2.9
- 3～3.9
  - 3
  - 3.2
  - 3.25
  - 3.5
  - 3.6
  - 3.7
  - 3.75
  - 3.8
  - 3.85
  - 3.9
- 4～4.9
  - 4
  - 4.1
  - 4.2
  - 4.25
  - 4.4
  - 4.5
  - 4.7
  - 4.75
  - 4.8
  - 4.9
- 5～5.9
  - 5
  - 5.1
  - 5.2
  - 5.3
  - 5.4
  - 5.5
  - 5.6
  - 5.7
  - 5.8
  - 5.9
- 6～6.9
  - 6
  - 6.2
  - 6.25
  - 6.3
  - 6.5
  - 6.6
  - 6.7
  - 6.8
  - 6.9
- 7～7.5
  - 7
  - 7.1
  - 7.2
  - 7.4
  - 7.5
- 8～8.9
  - 8
  - 8.1
  - 8.2
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.9
- 9～9.7
  - 9
  - 9.5
  - 9.7
- 10～10.5
  - 10
  - 10.5
- 11～11.5
  - 11
  - 11.2
  - 11.5
- 12～12.7
  - 12
  - 12.5
  - 12.7
- 13～13.5
  - 13
  - 13.5
- 14～14.5
  - 14
  - 14.5
- 15
- 16～16.5
  - 16
  - 16.5
- 17～17.5
  - 17
  - 17.5
- 18
- 19
- 20～20.5
  - 20
  - 20.5
- 21～21.5
  - 21
  - 21.5
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 30～30.5
  - 30
  - 30.5
- 31
- 32
- 34
- 35
- 36
- 38
- 40
- 41.5
- 45
- 48
- 50
- 53
- 55
- 58
- 60
- 65
- 66
- 70
- 80
- 90
- 100
- 110
- 120
- 130
Drawing

Clear

Underneck length (ℓ1)(mm)
- 0.1～0.9
  - 0.1
  - 0.2
  - 0.3
  - 0.45
  - 0.5
  - 0.6
  - 0.75
  - 0.8
  - 0.9
- 1～1.9
  - 1
  - 1.1
  - 1.2
  - 1.25
  - 1.3
  - 1.5
  - 1.6
  - 1.75
  - 1.8
  - 1.9
- 2～2.8
  - 2
  - 2.1
  - 2.2
  - 2.25
  - 2.3
  - 2.4
  - 2.5
  - 2.6
  - 2.7
  - 2.75
  - 2.8
- 3～3.8
  - 3
  - 3.3
  - 3.5
  - 3.6
  - 3.75
  - 3.8
- 4～4.8
  - 4
  - 4.2
  - 4.3
  - 4.4
  - 4.5
  - 4.6
  - 4.8
- 5～5.8
  - 5
  - 5.2
  - 5.4
  - 5.5
  - 5.6
  - 5.8
- 6～6.5
  - 6
  - 6.5
- 7～7.8
  - 7
  - 7.5
  - 7.8
- 8～8.5
  - 8
  - 8.5
- 9～9.5
  - 9
  - 9.5
- 10～10.5
  - 10
  - 10.5
- 11
- 12～12.5
  - 12
  - 12.5
- 13
- 14
- 15
- 16
- 17.5
- 18
- 20
- 21
- 22
- 23.1
- 24
- 25～25.6
  - 25
  - 25.6
- 26～26.8
  - 26
  - 26.8
- 27～27.6
  - 27
  - 27.6
- 28～28.7
  - 28
  - 28.7
- 30
- 31～31.6
  - 31
  - 31.5
  - 31.6
- 32～32.1
  - 32
  - 32.1
- 33～33.6
  - 33
  - 33.5
  - 33.6
- 34
- 35～35.6
  - 35
  - 35.5
  - 35.6
- 36～36.1
  - 36
  - 36.1
- 38～38.6
  - 38
  - 38.2
  - 38.6
- 39～39.5
  - 39
  - 39.5
- 40
- 41～41.4
  - 41
  - 41.2
  - 41.4
- 42～42.2
  - 42
  - 42.2
- 43～43.2
  - 43
  - 43.2
- 44～44.7
  - 44
  - 44.2
  - 44.7
- 45～45.2
  - 45
  - 45.2
- 46～46.7
  - 46
  - 46.5
  - 46.7
- 47.5
- 48～48.9
  - 48
  - 48.7
  - 48.9
- 49
- 50～50.7
  - 50
  - 50.7
- 52
- 53
- 54～54.5
  - 54
  - 54.5
- 55
- 57
- 58～58.5
  - 58
  - 58.5
- 60～60.8
  - 60
  - 60.3
  - 60.8
- 61～61.8
  - 61
  - 61.3
  - 61.8
- 62～62.5
  - 62
  - 62.3
  - 62.5
- 63～63.3
  - 63
  - 63.3
- 64～64.3
  - 64
  - 64.3
- 65
- 66
- 70
- 74
- 75
- 80～80.4
  - 80
  - 80.4
- 81～81.4
  - 81
  - 81.4
- 82.4
- 85
- 86
- 90～90.4
  - 90
  - 90.4
- 92.9
- 96
- 98
- 100
- 102
- 105
- 106
- 110
- 112
- 120～120.6
  - 120
  - 120.6
- 121.6
- 122.6
- 130
- 140
- 150
- 160～160.8
  - 160
  - 160.8
- 200
[7-30/1mm Unit(s)]

Drawing

Clear

Shank diameter (d)(mm)
3

4

5

6

7

8

9

10

11

12

14

15

16

18

20

25

32

42

CN50.8
Drawing

Clear

Number of flutes(sheet)
1

2

3

4

5

6
Clear

Overall Length (L)(mm)
4

32

34

35

38

40

45

49

50

51

52

53

55

57

58

60

63

65

70

72

75

78

80

83

85

90

92

95

100

104

105

110

115

116

120

121

125

130

133

134

135

140

150

153

155

160

170

175

180

190

200

206

210

220

230

240

250

280

300

330

350
Drawing

Clear

work material
- general steel
- Quenched and tempered steel
- High Hardness Steel-HRC55
- High Hardness Steel-HRC60
- High Hardness Steel-HRC65
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
Details

Clear

R Precision(μm)
-10～+10

-7 to +3

-0.02 to 0.02

-0.015～+0.015

-0.01

-0.01 to 0.01

-0.01～0.01

-0.01～+0.01

-0.008～+0.008

-0.007 to 0.003

-0.007 ~ +0.003

-0.007～0.003

-0.007～+0.003

-0.007～0.007

-0.007～+0.007

-0.005 ~ +0.001

-0.005 to +0.005

-0.005～0.005

-0.005～+0.005

-0.003 to 0.003

-0.003～0.003

-0.003～+0.003

-0.002～0.002

0～-50

0～-40

0～-0.04

0～-0.03

0.002～-0.002

±0.003

+0.003/-0.007

0.003～-0.003

＋0.003～－0.003

±0.005

0.005～-0.005

＋0.005～－0.005

±0.01

0.01～-0.01

＋0.01～－0.01

±0.02

0.02～-0.02

0.05～-0.05

±0.07

3 to -3

±5

5 to -5

5～-5

±8

±10

10～-10

20～-20
Clear

Machining Application
- Curved surface
- Side
- Engraving
- R Groove
Images

Clear

Coating
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- TiCN
- DLC
- CrN
- Dia Coat
- Non-Coated
- MRC
- DG
- Other
Details

Clear

Type
- Ball
- Long-Neck Ball
- Tapered neck ball
- Spherical Ball
Clear

Narrow search by specifying Manufacturer

- MISUMI (18)
- Economy series (0)
- OSG (1)
- GUHRING (0)
- Poulten&Graf (0)
- VAN HOORN (0)
- TOYO DRILL (0)
- DIJET (0)
- CREATE TOOL (0)
- MITSUBISHI MATERIALS (0)
- SUMITOMO ELECTRIC HARDMETAL (0)
- THE CUT (0)
- KYOCERA (0)
- ATOM (0)
- MITSUBISHI HITACHI TOOL (0)
- UNION TOOL (0)
- OKAZAKI SEIKO (0)
- MAPAL (0)
- KYOWA SEIKO (0)
- 7 LEADERS (0)
- WIDIN (0)
- SANDVIK (0)
- NACHI(FUJIKOSHI) (0)
- NS TOOL (0)
- ASAHI TOOLS (0)
- SANKO MFG (0)
- EIKOSHA (0)
Clear

CAD

- 2D
- 3D
Clear

Related Categories to Carbide Ball End Mills

- Ball End Mills (Carbide)
- Long Neck Ball End Mills (Carbide)

Top of the page

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

Credit Card Kartu Kredit
Bank TransferTransfer Bank

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Tel:021-8984-0008
Fax:021-8984-0007

Inquiry Permintaan

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

Carbide Ball End Mills（R Precision：±0.005）

Search by specifying the lower class category

Configure

Specification/Dimensions

R Size(mm)

Blade length (ℓ)(mm)

Underneck length (ℓ1)(mm)

Shank diameter (d)(mm)

Number of flutes(sheet)

Overall Length (L)(mm)

work material

R Precision(μm)

Machining Application

Coating

Type

Narrow search by specifying Manufacturer

CAD

Related Categories to Carbide Ball End Mills

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

Carbide Ball End Mills（R Precision：±0.005）

Search by specifying the lower class category

Configure

Specification/Dimensions

R Size(mm)

Blade length (ℓ)(mm)

Underneck length (ℓ1)(mm)

Shank diameter (d)(mm)

Number of flutes(sheet)

Overall Length (L)(mm)

work material

R Precision(μm)

Machining Application

Coating

Type

Narrow search by specifying Manufacturer

CAD

Related Categories to Carbide Ball End Mills

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) *Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) *Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan
Kategori / Merek

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB