(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

9.5 Million Products, 1,600 Brands, Free Shipping,
63,000 Stock items for Same Day Shipping

9.5 Juta Produk, 1,600 Merek, Gratis Pengiriman,
63,000 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

Straight Shank / End Mill Shank Drills (Carbide)（Coating Type：Other）

98 items

: 30; 45; 60

Days to Ship	All Same day 1 Day(s) or Less 2 Day(s) or Less 8 Day(s) or Less 9 Day(s) or Less 10 Day(s) or Less 11 Day(s) or Less 12 Day(s) or Less 14 Day(s) or Less 15 Day(s) or Less

Aqua Drill 3-Flute AQD3F

NACHI(FUJIKOSHI)

3-flute carbide drill capable of high-precision drilling and reamer-less processing.
[Features]
· High-precision drilling is possible due to the 3-flute cutting edge excellent in cutting balance. It also supports reamer-less processing.
· Aqua Drill 3-Flute has a proprietary thinning shape and good sharpness for minimal cutting resistance.
· Highly lubricating aqua coating and groove shape for excellent chipping discharge without clogging, enabling consistent hole drilling.
[Applications]
· High-precision drilling is made possible by the 3-flute cutting edge with excellent cutting balance and negative corner with high centrality.

Days to Ship: 11 Day(s) or more
Carbide Drill with Internal Coolant Supply (3D Type)_ADO-3D

OSG

[Features]
· Carbide 3D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials.
Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life.
Wide flutes for improved chip discharging
Wave-shaped flutes that finely fragment the chips

Days to Ship: 16 Day(s) or more
Carbide Drill 2D Type_AD-2D

OSG

[Features]
· Carbide 2D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials.
Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life.
Wide flutes for improved chip discharging
Wave-shaped flutes that finely fragment the chips

Days to Ship: 2 Day(s) or more
Aqua Drill FC AQDFC

NACHI(FUJIKOSHI)

A carbide drill with an optimum design for FC materials that provides a longer service life than conventional products.
[Features]
· Combination of cemented carbide ideal for FC material and Aquacoat with excellent heat and wear resistance.
· Longer life than conventional FC drills.
· The special cutting edge treatment suppresses wear of the corners most easily damaged in FC processing.
· A lifetime of 70% of that of new products is guaranteed after re-grinding, even if there is no recoating.
[Applications]
· Ideal for long life machining of FC, FCD, and low carbon steel.

Days to Ship: 16 Day(s) or more
Aqua Micro Drill AQMD

NACHI(FUJIKOSHI)

A drill that is difficult to break and stable for machining.
[Features]
· Employs cemented carbide ideal for small diameter hole drilling.
· A drill with high rigidity is used.
· The cutting load has been reduced by circumferential clearance and thinning.
[Applications]
· Hard to break and capable of stable processing thanks to the high-rigidity shape and the use of carbide alloy ideal for small diameter drilling work.

Days to Ship: 16 Day(s) or more
Carbide Drill 4D Type_AD-4D

OSG

[Features]
· Carbide 4D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials.
Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life.
Wide flutes for improved chip discharging
Wave-shaped flutes that finely fragment the chips

Days to Ship: 12 Day(s) or more
Aqua Drill EX Oil Hole 5D AQDEXOH5D

NACHI(FUJIKOSHI)

Aqua Drill EX series solid carbide drills with internal coolant.
[Features]
· Product lineup is for 3D, 5D and 8D boring depths.
· Aqua Drill EX based new flute shape adopted to achieve excellent chipping breakup.
· Aqua EX coating achieves stable long life.
· Capable of stable wet processing and MQL processing.
· For highly-efficient hole drilling up to 5 times the drill diameter.
[Applications]
· Ideal for stable processing of mild steel to high hardness materials, as well as work materials with difficult chip processing.

Days to Ship: 11 Day(s) or more
Aqua Drill EX Flat AQDEXZ

NACHI(FUJIKOSHI)

180° flat multifunctional carbide drill.
[Features]
· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.
· Capable of producing an accurate counter-bore surface with one shot.
· Aqua EX coating improves heat and wear resistance, providing long life.
[Applications]
· Can support a wide range of applications such as countersinking on inclined surfaces, correction of eccentric bores, burr-free machining of thin plates, etc.

Days to Ship: 10 Day(s) or more
Carbide Flat Drill 2D Type_ADF-2D

OSG

[Features]
· Can be used in various applications such as counterboring of inclined and curved surfaces and semi-split hole drilling.
· The wear-resistant layer suppresses abrasion and prevents crack propagation due to the periodic nano-layered coating.
· The original bottom edge shape reduces the cutting resistance and achieves stable processing.

Days to Ship: 2 Day(s) or more
Aqua Drill EX Stub AQDEXS

NACHI(FUJIKOSHI)

Carbide universal drill capable of stable high efficiency machining across a wide range of speeds from medium-low to high speed.
[Features]
· Shape of the new cutting edge greatly improves chip discharge performance.
· The cutting resistance is reduced to provide stable machining even on small machines.
· A special lubrication function film is provided on the surface layer of the AlCrSi coating to improve the lubricity, heat resistance and abrasion resistance, thereby prolonging the service life.
[Applications]
· The unique thinning shape increases biting and reduces cutting resistance.
· Stable cutting performance even with thin work materials and small low-rigidity processing machines.

Days to Ship: 16 Day(s) or more
Aqua Drill EX Oil Hole 3D AQDEXOH3D

NACHI(FUJIKOSHI)

Aqua Drill EX series solid carbide drills with internal coolant.
[Features]
· Aqua Drill EX based new flute shape adopted to achieve excellent chipping breakup.
· Aqua EX coating achieves stable long life.
[Applications]
· Stable processing of mild steel to high hardness materials.

Days to Ship: 11 Day(s) or more
Solid Carbide Drills for Stainless (Micro Revolution Drill)_MRS-GDL

OSG

Small diameter carbide drill long type for stainless steel machining. Stainless steel processing provides stable durability.

Days to Ship: 16 Day(s) or more
MVS, WSTAR Drill Bit (External Lubrication Type)

MITSUBISHI MATERIALS

General purpose carbide solid drill (external oil supply).
[Features]
· Wave blade type and groove shape having excellent chip disposal.
· The smoothing process reduces cutting resistance and provides excellent chip discharge performance.
[Applications]
· Drill-dedicated PVD grade shows excellent wear resistance with a wide range of work materials from general steel to carbon steel, alloy steel, stainless steel, and cast iron.

Days to Ship: 12 Day(s)
Straight Shank Drill, 5 × D Type N 2464

GUHRING

[Features]
· Highly versatile carbide solid drill.
· Supports various workpiece materials such as aluminum or general steel.
· FIRE coating achieves longer life.

Days to Ship: 10 Day(s) or more
MEGA Drill Reamer (Internal Oil Feed Type) 3D Type

MAPAL

[Features]
· H7 precision holes can be machined in one shot, with the 3 steps of "centering + drilling + reaming" integrated into 1 process.
· The characteristic chisel design and combination land demonstrate incredible centripetal force. (Drill Cutting Edge x 2, Reaming Edge x 4)
· Ideal for processing positioning holes or dowel pin holes.
[Applications]
· Work materials: Carbon steel, alloy steel, cast iron, light alloy.

Days to Ship: 35 Day(s)
Mapal for ProDrill-Steel (SCD360) Steel, External Supply X5D

MAPAL

[Features]
· Dedicated design intended for machining steel and cast iron.
· An affordable, economical type.
[Applications]
· Work materials: Carbon steel, alloy steel, cast iron, ductile cast iron.

Days to Ship: 12 Day(s)
Carbide Drill with Internal Coolant Supply (10D Type)_ADO-10D

OSG

[Features]
· Ultra-hard 10D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials.
Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life.
Those drills with oil holes use an internal oil supply system, enabling use in a wide range of applications. They also provide higher speed performance and have a longer service life.
The use of a middle margin improves stability when machining deep holes

Days to Ship: 16 Day(s) or more
Aqua Drill EX Regular AQDEXR

NACHI(FUJIKOSHI)

Carbide universal drill capable of stable high efficiency machining across a wide range of speeds from medium-low to high speed.
[Features]
· Shape of the new cutting edge greatly improves chip discharge performance.
· The cutting resistance is reduced to provide stable machining even on small machines.
· A special lubrication function film is provided on the surface layer of the AlCrSi coating.
· Longer life by improving lubricity and heat/abrasion resistance.
· The unique thinning shape increases biting and reduces cutting resistance.
[Applications]
· Ideal for thin work materials and small low-rigidity processing machines.

Days to Ship: 16 Day(s) or more
Aqua Drill EX Oil Hole 8D AQDEXOH8D

NACHI(FUJIKOSHI)

Aqua Drill EX series solid carbide drills with internal coolant.
[Features]
· Product lineup is for 3D, 5D and 8D boring depths.
· Aqua Drill EX based new flute shape adopted to achieve excellent chipping breakup.
· Aqua EX coating achieves stable long life.
[Applications]
· Stable processing of mild steel to high hardness materials.

Days to Ship: 16 Day(s) or more
Solid Carbide Drills TiAlN coated Medium for Hardened Steels_FH-GDN

OSG

Developed for machining small diameter holes in hardened steel, it is capable of machining deep holes (up to 7D or so)

Days to Ship: 12 Day(s) or more
Solid Carbide Ultra Small Size UVM Drills (10D Type)_UVM-DRL-10D

OSG

Because it uses carbide materials, it has both high hardness and elastic modulus, making it possible to drill extremely small holes in general steel, heat-treated steel, and high hardness steel.

Days to Ship: 16 Day(s) or more
WXS Coated Carbide Drill for High Hardened Steel (70HRC)_WH70-DRL

OSG

Ideal for processing from 55 to 70 HRC. A drill for ultra-high-hardness steel in which stable processing by highly reliable cutting edge shape and coating for high-hardness steel are combined.

Days to Ship: 16 Day(s) or more
WXS Coated Carbide Drill for Hardened Steel with Internal Coolant Supply (5D Type)_WHO55-5D

OSG

Ideal for steel materials and Ni-based alloys up to 55 HRC. Longer machining life is achieved thanks to the oil hole

Days to Ship: 16 Day(s) or more
Gun Drill 50×D EB100 5647

GUHRING

A gun drill integrally made from solid carbide from head to shank. Shrink fit tool holders can also be used.

Days to Ship: 27 Day(s) or more
Stainless Steel Drill 3×D RT100VA 8510

GUHRING

Offers high cutting speed and long service life when machining stainless steel, helping achieve highly precise hole drilling.

Days to Ship: 27 Day(s) or more
Giga Drill / High Feed Drill (internal Lubrication Type)

MAPAL

[Features]
· The four-flute effective cutting allows process feeding up to twice that of conventional models.
· Maximum tool life of up to twice as much as conventional items.
· Can be used as a trump card for reducing cycle time.
[Applications]
· Work materials: Cast iron, high-silicon aluminum.

Days to Ship: 35 Day(s)
MEGA Drill 180 (Internal Oil Feed Type)

MAPAL

Days to Ship: 12 Day(s)
MEGA Drill Reamer (External Oil Feed Type) 3D Type

MAPAL

Days to Ship: 35 Day(s)
Carbide Drill with Internal Coolant Supply (5D Type)_ADO-5D

OSG

[Features]
· Carbide 5D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials.
Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life.
Wide flutes for improved chip discharging
Wave-shaped flutes that finely fragment the chips

Days to Ship: 16 Day(s) or more
Carbide Drill with Internal Coolant Supply (8D Type)_ADO-8D

OSG

[Features]
· Carbide 8D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials.
Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life.
Those drills with oil holes use an internal oil supply system, enabling use in a wide range of applications. They also provide higher speed performance and have a longer service life.
The use of a middle margin improves stability when machining deep holes

Days to Ship: 12 Day(s) or more
Aqua Drill EX Power Feed 4D PF4D

NACHI(FUJIKOSHI)

[Features]
· A 4D drill bit that realizes high accuracy, long life machining with ultra-high feed machining with machining centers or lathes that can easily become clogged with scrap.

Days to Ship: 16 Day(s) or more
Aqua Drill Regular AQDR

NACHI(FUJIKOSHI)

A carbide drill that demonstrates outstanding performance in dry processing and high speed wet processing.
[Features]
· Adopts Aquacoat with excellent heat resistance and rich lubrication with the work material.
· Aqua coating and groove shape for excellent chipping discharge, enabling consistent hole drilling.
· Chipping resistance and corner abrasion resistance are improved due to the special cutting edge shape.
· High-speed wet machining is 2 to 3 times that of other companies' products, with dry machining efficiency equal to or greater than that of wet machining.
[Applications]
· Ideal for high-speed and long-life machining for anything from raw materials to high-hardness steel.

Days to Ship: 16 Day(s) or more
Aqua Drill with Bottom Blade 3-Flute AQDED3F

NACHI(FUJIKOSHI)

Coated carbide drill which achieves high efficiency machining of holes in cast materials and screw pilot holes.
[Features]
· Cast iron and aluminum cast parts have a high performance machined hole with H7 precision.
· 3-flute cutting edge with excellent cutting balance minimizes cutting vibration during machining.
· Finish processing is possible with work efficiency of 10 times or more compared to a reamer.
[Applications]
· 3-flute cutting edge with excellent cutting balance ideal for high-quality machining.

Days to Ship: 11 Day(s) or more
Aqua Drill Hard AQDH

NACHI(FUJIKOSHI)

Carbide drill capable of high efficiency machining of high-hardness steel of 50 to 70 HRC.
[Features]
· It uses carbide alloy ideal for high-hardness steel machining and AquaCoat, which has excellent heat resistance and abrasion resistance.
· Wear resistance and chipping resistance are greatly improved.
· Uses a thick core and weak torsion.
· The high rigidity makes it resistant against vibration as well, preventing damage from microchipping, etc.
[Applications]
· High performance machining of 50 to 70 HRC high hardness steel is possible.

Days to Ship: 12 Day(s) or more
Aqua Drill, Stub, Carbide Drill, AQDS

NACHI(FUJIKOSHI)

A carbide drill that demonstrates outstanding performance in dry processing and high speed wet processing.
[Features]
· Adopts Aquacoat with excellent heat resistance and rich lubrication with the work material.
· Aqua coating and groove shape for excellent chipping discharge, enabling consistent hole drilling.
· Chipping resistance and corner abrasion resistance are improved due to the special cutting edge shape.
· High-speed wet machining is 2 to 3 times that of other companies' products, with dry machining efficiency equal to or greater than that of wet machining.
[Applications]
· Ideal for high-speed and long-life machining for anything from raw materials to high-hardness steel.
· Drill for dry machining.

Days to Ship: 16 Day(s) or more
Solid Carbide Drills Stub for Byway and Precision Operation_WX-MS-GDS

OSG

Achieves high precision and high performance for drilling ultra-fine diameters for precision equipment or IT components

Days to Ship: 2 Day(s) or more
Solid Carbide Drills TiAlN coated Extra Long for Hard Mold Materials with Internal Coolant Supply (3D Type)_FTO-H-GDXL

OSG

Achieves 20D deep drilling of high hardness mold materials (45 to 55 HRC) with high stability, long life, and high efficiency

Days to Ship: 16 Day(s) or more
Solid Carbide Drills TiAlN coated 3 Flutes Stub with Long Neck for Hardened Steels_FHL-GDTS

OSG

Enables highly accurate machining of ultra-deep holes of 10 to 20 D in hardened steel which conventionally was only possible via electric discharge machining, realizing a great reduction in total drilling time.

Days to Ship: 12 Day(s) or more
Solid Carbide Drills TiAlN coated Stub for Hardened Steels_FH-GDS

OSG

Developed for machining small diameter holes in hardened steel, it is suitable for high-precision and long-life machining of shallow holes (up to 3D or so)

Days to Ship: 16 Day(s) or more
Solid Carbide Ultra Small Size UVM Drills (5D Type)_UVM-DRL-5D

OSG

Ultra-small diameter UVM drill 5D type to achieve drilling with a minimum diameter of ø0.02.

Days to Ship: 16 Day(s) or more
Solid Carbide Ultra Small Size UVM Drills (Starting Drills)_UVM-LDS

OSG

The collaboration with UVM-DRL enables high-precision drilling

Days to Ship: 16 Day(s) or more
UTDLX UT, Micro Coating Unimax Long Blade Drill Bit

UNION TOOL

[Features]
· Coated carbide drill for mass-produced parts and prototype parts, balancing performance and cost.
· Adopts a newly developed UT micro-coating that demonstrates high performance for soft materials
· The newly designed drill shape and X-thinning provide improved impact fracture resistance (durability performance) and reduced variation when drilling multiple holes
· The tip angle is set to 130° to suppress the burr height in through holes
· Groove length 15 times larger than the diameter enables highly precise drilling of deep holes.

Days to Ship: 12 Day(s) or more
C-UMD, Micro Coat, 2-Flute UNIMAX Drill Bit

UNION TOOL

[Features]
·UT microcoating.
·Tip angle 150
·Tool Material: Carbide

Days to Ship: 12 Day(s) or more
WXS Coated Carbide Drill for Hardened Steel (5D Type)_WH55-5D

OSG

Stable processing of die cast molds is possible. Ideal for steel materials up to 55 HRC

Days to Ship: 16 Day(s) or more
OMI Drill for Tough Steel, Short Size for 3D

OMIKOGYO

For more precise, more efficient operation.

Days to Ship: 35 Day(s)

Days to Ship:	11 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	2 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	11 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	2 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	11 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s)

Days to Ship:	10 Day(s) or more

Days to Ship:	35 Day(s)

Days to Ship:	12 Day(s)

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	27 Day(s) or more

Days to Ship:	27 Day(s) or more

Days to Ship:	35 Day(s)

Days to Ship:	12 Day(s)

Days to Ship:	35 Day(s)

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	11 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	2 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	35 Day(s)


Brand
Product Series
Days to Ship
Hole diameter (drill diameter) D(mm)
Overall Length L(mm)
Groove Length L(mm)
work material
Shank Type
Tool Material Type
With/without Oil Hole
Coating Y/N
Coating Type


Brand	NACHI(FUJIKOSHI)	OSG	OSG	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	MITSUBISHI MATERIALS	GUHRING	MAPAL	MAPAL	OSG	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	OSG	OSG	OSG	GUHRING	GUHRING	MAPAL	MAPAL	MAPAL	OSG	OSG	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	OSG	OSG	OSG	OSG	OSG	UNION TOOL	UNION TOOL	OSG	OMIKOGYO
Product Series	Aqua Drill 3-Flute AQD3F	Carbide Drill with Internal Coolant Supply (3D Type)_ADO-3D	Carbide Drill 2D Type_AD-2D	Aqua Drill FC AQDFC	Aqua Micro Drill AQMD	Carbide Drill 4D Type_AD-4D	Aqua Drill EX Oil Hole 5D AQDEXOH5D	Aqua Drill EX Flat AQDEXZ	Carbide Flat Drill 2D Type_ADF-2D	Aqua Drill EX Stub AQDEXS	Aqua Drill EX Oil Hole 3D AQDEXOH3D	Solid Carbide Drills for Stainless (Micro Revolution Drill)_MRS-GDL	MVS, WSTAR Drill Bit (External Lubrication Type)	Straight Shank Drill, 5 × D Type N 2464	MEGA Drill Reamer (Internal Oil Feed Type) 3D Type	Mapal for ProDrill-Steel (SCD360) Steel, External Supply X5D	Carbide Drill with Internal Coolant Supply (10D Type)_ADO-10D	Aqua Drill EX Regular AQDEXR	Aqua Drill EX Oil Hole 8D AQDEXOH8D	Solid Carbide Drills TiAlN coated Medium for Hardened Steels_FH-GDN	Solid Carbide Ultra Small Size UVM Drills (10D Type)_UVM-DRL-10D	WXS Coated Carbide Drill for High Hardened Steel (70HRC)_WH70-DRL	WXS Coated Carbide Drill for Hardened Steel with Internal Coolant Supply (5D Type)_WHO55-5D	Gun Drill 50×D EB100 5647	Stainless Steel Drill 3×D RT100VA 8510	Giga Drill / High Feed Drill (internal Lubrication Type)	MEGA Drill 180 (Internal Oil Feed Type)	MEGA Drill Reamer (External Oil Feed Type) 3D Type	Carbide Drill with Internal Coolant Supply (5D Type)_ADO-5D	Carbide Drill with Internal Coolant Supply (8D Type)_ADO-8D	Aqua Drill EX Power Feed 4D PF4D	Aqua Drill Regular AQDR	Aqua Drill with Bottom Blade 3-Flute AQDED3F	Aqua Drill Hard AQDH	Aqua Drill, Stub, Carbide Drill, AQDS	Solid Carbide Drills Stub for Byway and Precision Operation_WX-MS-GDS	Solid Carbide Drills TiAlN coated Extra Long for Hard Mold Materials with Internal Coolant Supply (3D Type)_FTO-H-GDXL	Solid Carbide Drills TiAlN coated 3 Flutes Stub with Long Neck for Hardened Steels_FHL-GDTS	Solid Carbide Drills TiAlN coated Stub for Hardened Steels_FH-GDS	Solid Carbide Ultra Small Size UVM Drills (5D Type)_UVM-DRL-5D	Solid Carbide Ultra Small Size UVM Drills (Starting Drills)_UVM-LDS	UTDLX UT, Micro Coating Unimax Long Blade Drill Bit	C-UMD, Micro Coat, 2-Flute UNIMAX Drill Bit	WXS Coated Carbide Drill for Hardened Steel (5D Type)_WH55-5D	OMI Drill for Tough Steel, Short Size for 3D
Days to Ship	11 Day(s) or more	16 Day(s) or more	2 Day(s) or more	16 Day(s) or more	16 Day(s) or more	12 Day(s) or more	11 Day(s) or more	10 Day(s) or more	2 Day(s) or more	16 Day(s) or more	11 Day(s) or more	16 Day(s) or more	12 Day(s)	10 Day(s) or more	35 Day(s)	12 Day(s)	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	12 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	27 Day(s) or more	27 Day(s) or more	35 Day(s)	12 Day(s)	35 Day(s)	16 Day(s) or more	12 Day(s) or more	16 Day(s) or more	16 Day(s) or more	11 Day(s) or more	12 Day(s) or more	16 Day(s) or more	2 Day(s) or more	16 Day(s) or more	12 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	12 Day(s) or more	12 Day(s) or more	16 Day(s) or more	35 Day(s)
Hole diameter (drill diameter) D(mm)	3 ～ 16	2 ～ 20	2 ～ 12	2 ～ 12	0.2 ～ 1.99	2 ～ 20	1 ～ 16	0.5 ～ 20	2 ～ 20	2 ～ 16	3 ～ 16	0.44 ～ 3	13	1 ～ 12	6 ～ 20	3 ～ 13	3 ～ 12	2 ～ 16	3 ～ 16	0.3 ～ 2	0.02 ～ 0.08	2 ～ 12	3.3 ～ 12	2.5 ～ 8	3 ～ 20	6 ～ 15	3 ～ 17.5	3 ～ 20	2 ～ 20	3 ～ 13	2 ～ 10	2.1 ～ 10	3 ～ 12	2 ～ 12	4 ～ 12.5	0.19 ～ 5	6 ～ 10	1 ～ 3	0.3 ～ 2	0.02 ～ 0.08	0.05	0.3 ～ 3	0.11 ～ 3	2 ～ 12	4 ～ 5
Overall Length L(mm)	48 ～ 144	66 ～ 165	62 ～ 102	47 ～ 130	38 ～ 47	66 ～ 153	56 ～ 194	47 ～ 145	50 ～ 140	45 ～ 112	68 ～ 146	38 ～ 66	104.2	34 ～ 151	79 ～ 131	66 ～ 124	90 ～ 215	49 ～ 160	81 ～ 242	38 ～ 50	38	42 ～ 120	78 ～ 156	185 ～ 485	62 ～ 131	82 ～ 133	66 ～ 141	66 ～ 131	70 ～ 225	80 ～ 206	49 ～ 98	47 ～ 110	48 ～ 108	44 ～ 108	54 ～ 110	38 ～ 64	190 ～ 280	57 ～ 65	38 ～ 46	38	38	38 ～ 80	38	68 ～ 156	57 ～ 69
Groove Length L(mm)	16 ～ 80	12 ～ 100	14 ～ 55	15 ～ 73	2.5 ～ 15	20 ～ 101	8 ～ 128	1.65 ～ 90	10 ～ 88	8 ～ 55	17 ～ 80	6 ～ 36	53.4	12 ～ 101	34 ～ 79	28 ～ 77	40 ～ 155	15 ～ 96	33 ～ 176	2.5 ～ 18	0.22 ～ 0.88	12 ～ 76	32 ～ 96	155 ～ 440	20 ～ 79	44 ～ 83	28 ～ 99	24 ～ 79	18 ～ 160	33 ～ 143	-	15 ～ 60	16 ～ 51	12 ～ 51	22 ～ 51	1.2 ～ 26	140 ～ 230	5 ～ 15	1.6 ～ 12	0.12 ～ 0.48	0.075	4.5 ～ 45	1.2 ～ 12	18 ～ 96	20 ～ 25
work material	general steel[○] / Quenched and tempered steel[◎] / high hardness steel[◎] / Cast Iron[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[◎]	general steel[◎] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[◎] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○]	Stainless Steel[◎]	general steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[○]	-	-	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○]	general steel[◎] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○]	Quenched and tempered steel[○] / high hardness steel[◎]	Quenched and tempered steel[○] / high hardness steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	high hardness steel[◎]	Quenched and tempered steel[◎] / high hardness steel[◎]	-	-	-	-	-	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○]	general steel[○] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○]	general steel[◎] / Cast Iron[○]	high hardness steel[◎]	general steel[○] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]	high hardness steel[◎]	Quenched and tempered steel[○] / high hardness steel[◎]	Quenched and tempered steel[○] / high hardness steel[◎]	Quenched and tempered steel[○] / high hardness steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	Quenched and tempered steel[○] / high hardness steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Titanium[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Titanium[○] / Copper[○]	Quenched and tempered steel[◎] / high hardness steel[◎]	general steel[○] / Stainless Steel[○] / Cast Iron[○]
Shank Type	End Mill Shank / straight shank	End Mill Shank	End Mill Shank	End Mill Shank / straight shank	End Mill Shank	End Mill Shank	End Mill Shank / straight shank	End Mill Shank / straight shank	End Mill Shank / straight shank	End Mill Shank / straight shank	End Mill Shank / straight shank	End Mill Shank / straight shank	-	straight shank	-	-	End Mill Shank	End Mill Shank / straight shank	End Mill Shank / straight shank	End Mill Shank	End Mill Shank	End Mill Shank / straight shank	End Mill Shank / straight shank	-	-	-	-	-	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank / straight shank	End Mill Shank / straight shank	End Mill Shank / straight shank	End Mill Shank / straight shank	End Mill Shank / straight shank	straight shank	End Mill Shank / straight shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank / straight shank	End Mill Shank
Tool Material Type	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	-	Carbide	-	-	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	-	-	-	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide
With/without Oil Hole	NA	Available	NA	NA	NA	NA	Available	NA	NA	-	Available	NA	-	NA	-	-	Available	NA	Available	NA	NA	NA	Available	Available	Available	-	-	-	Available	Available	-	NA	NA	NA	NA	NA	Available	NA	Available	NA	NA	NA	NA	NA	NA
Coating Y/N	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available
Coating Type	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other	Other

Configure

Specification/Dimensions

Hole diameter (drill diameter) D(mm)
- 0～0.995
  - 0
  - 0.01
  - 0.015
  - 0.02
  - 0.025
  - 0.03
  - 0.035
  - 0.04
  - 0.045
  - 0.05
  - 0.055
  - 0.06
  - 0.065
  - 0.07
  - 0.075
  - 0.08
  - 0.085
  - 0.09
  - 0.095
  - 0.1
  - 0.105
  - 0.11
  - 0.115
  - 0.12
  - 0.125
  - 0.13
  - 0.135
  - 0.14
  - 0.145
  - 0.15
  - 0.155
  - 0.16
  - 0.165
  - 0.17
  - 0.175
  - 0.18
  - 0.185
  - 0.19
  - 0.195
  - 0.2
  - 0.205
  - 0.21
  - 0.215
  - 0.22
  - 0.225
  - 0.23
  - 0.235
  - 0.24
  - 0.245
  - 0.25
  - 0.255
  - 0.26
  - 0.265
  - 0.27
  - 0.275
  - 0.28
  - 0.285
  - 0.29
  - 0.295
  - 0.3
  - 0.305
  - 0.31
  - 0.315
  - 0.32
  - 0.325
  - 0.33
  - 0.335
  - 0.34
  - 0.345
  - 0.35
  - 0.355
  - 0.36
  - 0.365
  - 0.37
  - 0.375
  - 0.38
  - 0.385
  - 0.39
  - 0.395
  - 0.4
  - 0.405
  - 0.41
  - 0.415
  - 0.42
  - 0.425
  - 0.43
  - 0.435
  - 0.44
  - 0.445
  - 0.45
  - 0.455
  - 0.46
  - 0.465
  - 0.47
  - 0.475
  - 0.48
  - 0.485
  - 0.49
  - 0.495
  - 0.5
  - 0.505
  - 0.51
  - 0.515
  - 0.52
  - 0.525
  - 0.53
  - 0.535
  - 0.54
  - 0.545
  - 0.55
  - 0.555
  - 0.56
  - 0.565
  - 0.57
  - 0.575
  - 0.58
  - 0.585
  - 0.59
  - 0.595
  - 0.6
  - 0.605
  - 0.61
  - 0.615
  - 0.62
  - 0.625
  - 0.63
  - 0.635
  - 0.64
  - 0.645
  - 0.65
  - 0.655
  - 0.66
  - 0.665
  - 0.67
  - 0.675
  - 0.68
  - 0.685
  - 0.69
  - 0.695
  - 0.7
  - 0.705
  - 0.71
  - 0.715
  - 0.72
  - 0.725
  - 0.73
  - 0.735
  - 0.74
  - 0.745
  - 0.75
  - 0.755
  - 0.76
  - 0.765
  - 0.77
  - 0.775
  - 0.78
  - 0.785
  - 0.79
  - 0.795
  - 0.8
  - 0.805
  - 0.81
  - 0.815
  - 0.82
  - 0.825
  - 0.83
  - 0.835
  - 0.84
  - 0.845
  - 0.85
  - 0.855
  - 0.86
  - 0.865
  - 0.87
  - 0.875
  - 0.88
  - 0.885
  - 0.89
  - 0.895
  - 0.9
  - 0.905
  - 0.91
  - 0.915
  - 0.92
  - 0.925
  - 0.93
  - 0.935
  - 0.94
  - 0.945
  - 0.95
  - 0.955
  - 0.96
  - 0.965
  - 0.97
  - 0.975
  - 0.98
  - 0.985
  - 0.99
  - 0.995
- 1～1.995
  - 1
  - 1.005
  - 1.01
  - 1.015
  - 1.02
  - 1.025
  - 1.03
  - 1.035
  - 1.04
  - 1.045
  - 1.05
  - 1.055
  - 1.06
  - 1.065
  - 1.07
  - 1.075
  - 1.08
  - 1.085
  - 1.09
  - 1.095
  - 1.1
  - 1.105
  - 1.11
  - 1.115
  - 1.12
  - 1.125
  - 1.13
  - 1.135
  - 1.14
  - 1.145
  - 1.15
  - 1.155
  - 1.16
  - 1.165
  - 1.17
  - 1.175
  - 1.18
  - 1.185
  - 1.19
  - 1.195
  - 1.2
  - 1.205
  - 1.21
  - 1.215
  - 1.22
  - 1.225
  - 1.23
  - 1.235
  - 1.24
  - 1.245
  - 1.25
  - 1.255
  - 1.26
  - 1.265
  - 1.27
  - 1.275
  - 1.28
  - 1.285
  - 1.29
  - 1.295
  - 1.3
  - 1.305
  - 1.31
  - 1.315
  - 1.32
  - 1.325
  - 1.33
  - 1.335
  - 1.34
  - 1.345
  - 1.35
  - 1.355
  - 1.36
  - 1.365
  - 1.37
  - 1.375
  - 1.38
  - 1.385
  - 1.39
  - 1.395
  - 1.4
  - 1.405
  - 1.41
  - 1.415
  - 1.42
  - 1.425
  - 1.43
  - 1.435
  - 1.44
  - 1.445
  - 1.45
  - 1.455
  - 1.46
  - 1.465
  - 1.47
  - 1.475
  - 1.48
  - 1.485
  - 1.49
  - 1.495
  - 1.5
  - 1.505
  - 1.51
  - 1.515
  - 1.52
  - 1.525
  - 1.53
  - 1.535
  - 1.54
  - 1.545
  - 1.55
  - 1.555
  - 1.56
  - 1.565
  - 1.57
  - 1.575
  - 1.58
  - 1.585
  - 1.59
  - 1.595
  - 1.6
  - 1.605
  - 1.61
  - 1.615
  - 1.62
  - 1.625
  - 1.63
  - 1.635
  - 1.64
  - 1.645
  - 1.65
  - 1.655
  - 1.66
  - 1.665
  - 1.67
  - 1.675
  - 1.68
  - 1.685
  - 1.69
  - 1.695
  - 1.7
  - 1.705
  - 1.71
  - 1.715
  - 1.72
  - 1.725
  - 1.73
  - 1.735
  - 1.74
  - 1.745
  - 1.75
  - 1.755
  - 1.76
  - 1.765
  - 1.77
  - 1.775
  - 1.78
  - 1.785
  - 1.79
  - 1.795
  - 1.8
  - 1.805
  - 1.81
  - 1.815
  - 1.82
  - 1.825
  - 1.83
  - 1.835
  - 1.84
  - 1.845
  - 1.85
  - 1.855
  - 1.86
  - 1.865
  - 1.87
  - 1.875
  - 1.88
  - 1.885
  - 1.89
  - 1.895
  - 1.9
  - 1.905
  - 1.91
  - 1.915
  - 1.92
  - 1.925
  - 1.93
  - 1.935
  - 1.94
  - 1.945
  - 1.95
  - 1.955
  - 1.96
  - 1.965
  - 1.97
  - 1.975
  - 1.98
  - 1.984
  - 1.985
  - 1.99
  - 1.995
- 2～2.99
  - 2
  - 2.01
  - 2.015
  - 2.02
  - 2.03
  - 2.04
  - 2.05
  - 2.06
  - 2.07
  - 2.08
  - 2.09
  - 2.1
  - 2.11
  - 2.115
  - 2.12
  - 2.13
  - 2.14
  - 2.15
  - 2.16
  - 2.17
  - 2.18
  - 2.19
  - 2.2
  - 2.21
  - 2.215
  - 2.22
  - 2.23
  - 2.24
  - 2.25
  - 2.26
  - 2.27
  - 2.28
  - 2.29
  - 2.3
  - 2.31
  - 2.315
  - 2.32
  - 2.33
  - 2.34
  - 2.35
  - 2.36
  - 2.37
  - 2.38
  - 2.383
  - 2.39
  - 2.4
  - 2.41
  - 2.415
  - 2.42
  - 2.43
  - 2.439
  - 2.44
  - 2.45
  - 2.46
  - 2.47
  - 2.48
  - 2.489
  - 2.49
  - 2.5
  - 2.51
  - 2.515
  - 2.52
  - 2.53
  - 2.54
  - 2.55
  - 2.56
  - 2.57
  - 2.578
  - 2.58
  - 2.59
  - 2.6
  - 2.61
  - 2.615
  - 2.62
  - 2.63
  - 2.64
  - 2.642
  - 2.65
  - 2.66
  - 2.67
  - 2.68
  - 2.69
  - 2.7
  - 2.705
  - 2.71
  - 2.715
  - 2.72
  - 2.73
  - 2.74
  - 2.75
  - 2.76
  - 2.77
  - 2.779
  - 2.78
  - 2.79
  - 2.8
  - 2.81
  - 2.815
  - 2.82
  - 2.83
  - 2.84
  - 2.85
  - 2.86
  - 2.87
  - 2.88
  - 2.89
  - 2.9
  - 2.91
  - 2.915
  - 2.92
  - 2.93
  - 2.94
  - 2.947
  - 2.95
  - 2.96
  - 2.97
  - 2.98
  - 2.99
- 3～3.99
  - 3
  - 3.01
  - 3.02
  - 3.03
  - 3.04
  - 3.048
  - 3.05
  - 3.06
  - 3.07
  - 3.08
  - 3.09
  - 3.1
  - 3.11
  - 3.12
  - 3.13
  - 3.14
  - 3.15
  - 3.16
  - 3.17
  - 3.175
  - 3.18
  - 3.19
  - 3.2
  - 3.21
  - 3.22
  - 3.23
  - 3.24
  - 3.25
  - 3.26
  - 3.264
  - 3.27
  - 3.28
  - 3.29
  - 3.3
  - 3.31
  - 3.32
  - 3.33
  - 3.34
  - 3.35
  - 3.36
  - 3.37
  - 3.38
  - 3.39
  - 3.4
  - 3.41
  - 3.42
  - 3.43
  - 3.44
  - 3.45
  - 3.455
  - 3.46
  - 3.47
  - 3.48
  - 3.49
  - 3.5
  - 3.51
  - 3.52
  - 3.53
  - 3.54
  - 3.55
  - 3.56
  - 3.57
  - 3.571
  - 3.58
  - 3.59
  - 3.6
  - 3.61
  - 3.62
  - 3.63
  - 3.64
  - 3.65
  - 3.658
  - 3.66
  - 3.67
  - 3.68
  - 3.69
  - 3.7
  - 3.71
  - 3.72
  - 3.73
  - 3.734
  - 3.74
  - 3.75
  - 3.76
  - 3.77
  - 3.78
  - 3.79
  - 3.8
  - 3.81
  - 3.82
  - 3.83
  - 3.84
  - 3.85
  - 3.86
  - 3.87
  - 3.88
  - 3.89
  - 3.9
  - 3.91
  - 3.92
  - 3.93
  - 3.94
  - 3.95
  - 3.96
  - 3.97
  - 3.98
  - 3.99
- 4～4.99
  - 4
  - 4.01
  - 4.02
  - 4.03
  - 4.039
  - 4.04
  - 4.05
  - 4.06
  - 4.07
  - 4.08
  - 4.09
  - 4.1
  - 4.11
  - 4.12
  - 4.13
  - 4.14
  - 4.15
  - 4.16
  - 4.17
  - 4.176
  - 4.18
  - 4.19
  - 4.2
  - 4.21
  - 4.217
  - 4.22
  - 4.23
  - 4.24
  - 4.25
  - 4.26
  - 4.27
  - 4.28
  - 4.29
  - 4.3
  - 4.31
  - 4.32
  - 4.33
  - 4.34
  - 4.35
  - 4.36
  - 4.366
  - 4.37
  - 4.38
  - 4.39
  - 4.4
  - 4.41
  - 4.42
  - 4.43
  - 4.44
  - 4.45
  - 4.46
  - 4.47
  - 4.48
  - 4.49
  - 4.5
  - 4.51
  - 4.52
  - 4.53
  - 4.54
  - 4.55
  - 4.56
  - 4.57
  - 4.58
  - 4.59
  - 4.6
  - 4.61
  - 4.62
  - 4.623
  - 4.63
  - 4.64
  - 4.65
  - 4.66
  - 4.67
  - 4.68
  - 4.69
  - 4.7
  - 4.71
  - 4.72
  - 4.73
  - 4.74
  - 4.75
  - 4.76
  - 4.763
  - 4.77
  - 4.78
  - 4.79
  - 4.8
  - 4.81
  - 4.82
  - 4.83
  - 4.837
  - 4.84
  - 4.85
  - 4.852
  - 4.86
  - 4.864
  - 4.87
  - 4.88
  - 4.89
  - 4.9
  - 4.91
  - 4.92
  - 4.93
  - 4.94
  - 4.95
  - 4.96
  - 4.97
  - 4.98
  - 4.99
- 5～5.99
  - 5
  - 5.01
  - 5.02
  - 5.03
  - 5.04
  - 5.05
  - 5.06
  - 5.07
  - 5.08
  - 5.09
  - 5.1
  - 5.106
  - 5.11
  - 5.12
  - 5.13
  - 5.14
  - 5.15
  - 5.159
  - 5.16
  - 5.17
  - 5.18
  - 5.19
  - 5.2
  - 5.21
  - 5.22
  - 5.23
  - 5.24
  - 5.25
  - 5.26
  - 5.27
  - 5.28
  - 5.29
  - 5.3
  - 5.31
  - 5.32
  - 5.33
  - 5.34
  - 5.35
  - 5.36
  - 5.37
  - 5.38
  - 5.39
  - 5.4
  - 5.41
  - 5.42
  - 5.43
  - 5.44
  - 5.45
  - 5.46
  - 5.47
  - 5.48
  - 5.49
  - 5.49999999999999
  - 5.5
  - 5.51
  - 5.52
  - 5.53
  - 5.54
  - 5.55
  - 5.558
  - 5.56
  - 5.565
  - 5.57
  - 5.58
  - 5.59
  - 5.59999999999999
  - 5.6
  - 5.61
  - 5.616
  - 5.62
  - 5.63
  - 5.64
  - 5.65
  - 5.66
  - 5.67
  - 5.68
  - 5.69
  - 5.69999999999999
  - 5.7
  - 5.71
  - 5.72
  - 5.73
  - 5.74
  - 5.75
  - 5.76
  - 5.77
  - 5.78
  - 5.79
  - 5.79999999999999
  - 5.8
  - 5.81
  - 5.82
  - 5.83
  - 5.84
  - 5.85
  - 5.86
  - 5.87
  - 5.88
  - 5.89
  - 5.89999999999999
  - 5.9
  - 5.91
  - 5.92
  - 5.93
  - 5.94
  - 5.95
  - 5.954
  - 5.96
  - 5.97
  - 5.98
  - 5.99
- 6～6.95
  - 6
  - 6.01
  - 6.02
  - 6.03
  - 6.04
  - 6.05
  - 6.06
  - 6.07
  - 6.08
  - 6.09
  - 6.09999999999999
  - 6.1
  - 6.13
  - 6.15
  - 6.19999999999999
  - 6.2
  - 6.23
  - 6.25
  - 6.29999999999999
  - 6.3
  - 6.33
  - 6.35
  - 6.35 (¼")
  - 6.365
  - 6.375
  - 6.39999999999999
  - 6.4
  - 6.43
  - 6.45
  - 6.49999999999999
  - 6.5
  - 6.528
  - 6.53
  - 6.55
  - 6.59999999999999
  - 6.6
  - 6.63
  - 6.65
  - 6.69999999999999
  - 6.7
  - 6.73
  - 6.746
  - 6.75
  - 6.8
  - 6.83
  - 6.85
  - 6.89999999999999
  - 6.9
  - 6.93
  - 6.95
- 7～7.98
  - 7
  - 7.01
  - 7.02
  - 7.03
  - 7.04
  - 7.05
  - 7.06
  - 7.07
  - 7.08
  - 7.09
  - 7.09999999999999
  - 7.1
  - 7.13
  - 7.14
  - 7.145
  - 7.19999999999999
  - 7.2
  - 7.23
  - 7.25
  - 7.29999999999999
  - 7.3
  - 7.33
  - 7.35
  - 7.36
  - 7.38
  - 7.39999999999999
  - 7.4
  - 7.43
  - 7.45
  - 7.49999999999999
  - 7.5
  - 7.52
  - 7.53
  - 7.54
  - 7.541
  - 7.55
  - 7.59999999999999
  - 7.6
  - 7.63
  - 7.69999999999999
  - 7.7
  - 7.73
  - 7.75
  - 7.79999999999999
  - 7.8
  - 7.83
  - 7.85
  - 7.89999999999999
  - 7.9
  - 7.93
  - 7.938
  - 7.94
  - 7.95
  - 7.953
  - 7.98
- 8～8.93
  - 8
  - 8.01
  - 8.02
  - 8.03
  - 8.04
  - 8.05
  - 8.06
  - 8.07
  - 8.08
  - 8.09
  - 8.09999999999999
  - 8.1
  - 8.13
  - 8.19999999999999
  - 8.2
  - 8.23
  - 8.25
  - 8.29999999999998
  - 8.3
  - 8.33
  - 8.334
  - 8.39999999999998
  - 8.4
  - 8.43
  - 8.433
  - 8.5
  - 8.50000000000001
  - 8.53
  - 8.58
  - 8.59999999999998
  - 8.6
  - 8.63
  - 8.69999999999998
  - 8.7
  - 8.73
  - 8.733
  - 8.75
  - 8.79999999999998
  - 8.8
  - 8.80000000000001
  - 8.83
  - 8.85
  - 8.89999999999998
  - 8.9
  - 8.90000000000001
  - 8.93
- 9～9.97
  - 9
  - 9.01
  - 9.02
  - 9.03
  - 9.04
  - 9.05
  - 9.06
  - 9.07
  - 9.08
  - 9.09
  - 9.09999999999998
  - 9.1
  - 9.129
  - 9.13
  - 9.19999999999998
  - 9.2
  - 9.20000000000001
  - 9.21
  - 9.23
  - 9.24
  - 9.25
  - 9.26
  - 9.29999999999998
  - 9.3
  - 9.30000000000001
  - 9.33
  - 9.347
  - 9.36
  - 9.38
  - 9.39999999999998
  - 9.4
  - 9.40000000000001
  - 9.43
  - 9.49999999999998
  - 9.5
  - 9.50000000000001
  - 9.52
  - 9.525
  - 9.53
  - 9.54
  - 9.55
  - 9.59999999999998
  - 9.6
  - 9.60000000000001
  - 9.63
  - 9.69999999999998
  - 9.7
  - 9.70000000000001
  - 9.73
  - 9.75
  - 9.79999999999998
  - 9.8
  - 9.80000000000001
  - 9.83
  - 9.85
  - 9.89999999999998
  - 9.9
  - 9.90000000000001
  - 9.92
  - 9.921
  - 9.93
  - 9.95
  - 9.97
- 10～10.93
  - 10
  - 10.01
  - 10.02
  - 10.03
  - 10.04
  - 10.05
  - 10.06
  - 10.07
  - 10.08
  - 10.09
  - 10.1
  - 10.13
  - 10.2
  - 10.23
  - 10.25
  - 10.3
  - 10.32
  - 10.33
  - 10.4
  - 10.43
  - 10.5
  - 10.53
  - 10.6
  - 10.63
  - 10.7
  - 10.716
  - 10.72
  - 10.73
  - 10.75
  - 10.8
  - 10.83
  - 10.85
  - 10.9
  - 10.93
- 11～11.95
  - 11
  - 11.01
  - 11.02
  - 11.03
  - 11.04
  - 11.05
  - 11.06
  - 11.07
  - 11.08
  - 11.09
  - 11.1
  - 11.11
  - 11.113
  - 11.13
  - 11.133
  - 11.2
  - 11.22
  - 11.23
  - 11.24
  - 11.3
  - 11.33
  - 11.36
  - 11.38
  - 11.4
  - 11.43
  - 11.5
  - 11.509
  - 11.51
  - 11.53
  - 11.56
  - 11.6
  - 11.63
  - 11.7
  - 11.73
  - 11.8
  - 11.83
  - 11.85
  - 11.9
  - 11.908
  - 11.91
  - 11.93
  - 11.95
- 12～12.96
  - 12
  - 12.01
  - 12.02
  - 12.03
  - 12.04
  - 12.05
  - 12.06
  - 12.07
  - 12.08
  - 12.09
  - 12.1
  - 12.2
  - 12.3
  - 12.304
  - 12.4
  - 12.5
  - 12.6
  - 12.7
  - 12.75
  - 12.8
  - 12.9
  - 12.96
- 13～13.9
  - 13
  - 13.096
  - 13.1
  - 13.2
  - 13.25
  - 13.3
  - 13.4
  - 13.43
  - 13.49
  - 13.5
  - 13.55
  - 13.6
  - 13.7
  - 13.8
  - 13.89
  - 13.891
  - 13.9
- 14～14.96
  - 14
  - 14.1
  - 14.2
  - 14.288
  - 14.29
  - 14.3
  - 14.4
  - 14.5
  - 14.6
  - 14.684
  - 14.7
  - 14.8
  - 14.9
  - 14.96
- 15～15.9
  - 15
  - 15.083
  - 15.1
  - 15.2
  - 15.25
  - 15.3
  - 15.4
  - 15.479
  - 15.5
  - 15.55
  - 15.6
  - 15.7
  - 15.8
  - 15.87
  - 15.875
  - 15.9
- 16～16.9
  - 16
  - 16.1
  - 16.2
  - 16.271
  - 16.3
  - 16.4
  - 16.5
  - 16.6
  - 16.67
  - 16.7
  - 16.8
  - 16.9
- 17～17.9
  - 17
  - 17.1
  - 17.2
  - 17.3
  - 17.4
  - 17.46
  - 17.463
  - 17.5
  - 17.55
  - 17.6
  - 17.7
  - 17.8
  - 17.9
- 18～18.9
  - 18
  - 18.1
  - 18.2
  - 18.258
  - 18.3
  - 18.4
  - 18.5
  - 18.6
  - 18.654
  - 18.7
  - 18.8
  - 18.9
- 19～19.9
  - 19
  - 19.05
  - 19.1
  - 19.2
  - 19.3
  - 19.4
  - 19.5
  - 19.55
  - 19.6
  - 19.7
  - 19.8
  - 19.9
- 20～20.5
  - 20
  - 20.5
- 21～21.5
  - 21
  - 21.5
- 22～22.5
  - 22
  - 22.22
  - 22.5
- 23～23.5
  - 23
  - 23.5
- 24～24.5/24.7
  - 24
  - 24.5
  - 24.5/24.7
- 25～25.5
  - 25
  - 25.5
- 26～26.5/26.7
  - 26
  - 26.5
  - 26.5/26.7
- 27～27.5
  - 27
  - 27.5
- 28～28.5
  - 28
  - 28.5
- 29～29.5
  - 29
  - 29.5
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 44
Drawing

Clear

Overall Length L(mm)
11

13

16

20

21

22

23

24

25

26

28

30

32

34

35

36

38

40

42

42.5

43

44

45

46

47

48

48.5

49

50

51

52

53

54

55

56

57

58

59

60

61

62

63

64

65

66

67

68

69

70

71

72

73

74

75

76

77

78

79

80

81

82

83

84

85

86

87

88

89

90

91

92

93

94

95

96

97

98

100

101

102

103

104

104.2

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

130

131

133

134

135

136

137

138

139

140

141

142

143

144

145

146

147

148

149

150

151

152

153

154

155

156

157

158

159

160

161

162

163

165

166

167

168

169

170

171

172

174

175

176

177

178

179

180

182

183

184

185

186

188

190

191

192

193

194

195

196

197

198

199

200

201

202

203

204

205

206

208

209

210

211

212

215

216

217

218

220

221

222

223

224

225

227

228

229

230

232

233

234

235

237

238

240

241

242

244

245

246

247

248

249

250

255

257

258

260

263

265

267

268

269

270

271

272

274

275

276

278

280

281

285

290

294

295

297

298

300

302

303

305

310

314

315

320

321

322

323

330

339

340

342

350

359

363

367

370

371

383

386

390

400

420

430

450

480

485

500

510

560

600

740

910

1080
Drawing

Clear

Groove Length L(mm)
- 0～0.9
  - 0
  - 0.015
  - 0.025
  - 0.04
  - 0.05
  - 0.06
  - 0.075
  - 0.08
  - 0.09
  - 0.1
  - 0.12
  - 0.14
  - 0.15
  - 0.16
  - 0.18
  - 0.2
  - 0.22
  - 0.24
  - 0.25
  - 0.3
  - 0.33
  - 0.4
  - 0.44
  - 0.48
  - 0.5
  - 0.55
  - 0.6
  - 0.7
  - 0.8
  - 0.88
  - 0.9
- 1～1.98
  - 1
  - 1.1
  - 1.2
  - 1.3
  - 1.4
  - 1.5
  - 1.6
  - 1.65
  - 1.7
  - 1.8
  - 1.9
  - 1.98
- 2～2.97
  - 2
  - 2.1
  - 2.2
  - 2.3
  - 2.31
  - 2.4
  - 2.5
  - 2.6
  - 2.64
  - 2.7
  - 2.8
  - 2.9
  - 2.97
- 3～3.9
  - 3
  - 3.2
  - 3.3
  - 3.4
  - 3.5
  - 3.6
  - 3.7
  - 3.8
  - 3.9
- 4～4.9
  - 4
  - 4.1
  - 4.2
  - 4.3
  - 4.4
  - 4.5
  - 4.6
  - 4.7
  - 4.8
  - 4.9
- 5～5.8
  - 5
  - 5.1
  - 5.2
  - 5.3
  - 5.4
  - 5.5
  - 5.6
  - 5.7
  - 5.8
- 6～6.8
  - 6
  - 6.2
  - 6.3
  - 6.4
  - 6.5
  - 6.6
  - 6.8
- 7～7.8
  - 7
  - 7.2
  - 7.3
  - 7.4
  - 7.5
  - 7.6
  - 7.8
- 8～8.8
  - 8
  - 8.2
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.8
- 9～9.8
  - 9
  - 9.2
  - 9.3
  - 9.4
  - 9.5
  - 9.6
  - 9.8
- 10～10.8
  - 10
  - 10..1
  - 10.2
  - 10.4
  - 10.5
  - 10.6
  - 10.8
- 11～11.8
  - 11
  - 11.1
  - 11.2
  - 11.3
  - 11.4
  - 11.6
  - 11.7
  - 11.8
- 12～12.8
  - 12
  - 12.2
  - 12.3
  - 12.5
  - 12.6
  - 12.8
- 13～13.8
  - 13
  - 13.1
  - 13.2
  - 13.5
  - 13.8
- 14～14.9
  - 14
  - 14.3
  - 14.4
  - 14.5
  - 14.8
  - 14.9
- 15～15.8
  - 15
  - 15.3
  - 15.6
  - 15.8
- 16～16.8
  - 16
  - 16.1
  - 16.2
  - 16.5
  - 16.7
  - 16.8
- 17～17.8
  - 17
  - 17.1
  - 17.2
  - 17.3
  - 17.4
  - 17.6
  - 17.8
- 18～18.9
  - 18
  - 18.5
  - 18.6
  - 18.8
  - 18.9
- 19～19.8
  - 19
  - 19.2
  - 19.4
  - 19.5
  - 19.7
  - 19.8
- 20～20.7
  - 20
  - 20.3
  - 20.4
  - 20.7
- 21～21.8
  - 21
  - 21.2
  - 21.4
  - 21.6
  - 21.8
- 22～22.8
  - 22
  - 22.1
  - 22.2
  - 22.5
  - 22.8
- 23～23.9
  - 23
  - 23.3
  - 23.4
  - 23.9
- 24～24.8
  - 24
  - 24.3
  - 24.5
  - 24.6
  - 24.8
- 25～25.8
  - 25
  - 25.2
  - 25.5
  - 25.7
  - 25.8
- 26～26.6
  - 26
  - 26.1
  - 26.3
  - 26.4
  - 26.6
- 27～27.8
  - 27
  - 27.6
  - 27.8
- 28～28.8
  - 28
  - 28.1
  - 28.2
  - 28.5
  - 28.8
- 29～29.4
  - 29
  - 29.3
  - 29.4
- 30～30.8
  - 30
  - 30.6
  - 30.8
- 31～31.7
  - 31
  - 31.2
  - 31.5
  - 31.7
- 32～32.8
  - 32
  - 32.3
  - 32.4
  - 32.8
- 33～33.8
  - 33
  - 33.6
  - 33.8
- 34～34.8
  - 34
  - 34.1
  - 34.5
  - 34.8
- 35～35.5
  - 35
  - 35.3
  - 35.5
- 36～36.8
  - 36
  - 36.5
  - 36.8
- 37～37.5
  - 37
  - 37.5
- 38～38.3
  - 38
  - 38.3
- 39～39.8
  - 39
  - 39.8
- 40～40.5
  - 40
  - 40.5
- 41～41.3
  - 41
  - 41.3
- 42～42.8
  - 42
  - 42.8
- 43～43.5
  - 43
  - 43.2
  - 43.5
- 44～44.3
  - 44
  - 44.3
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53～53.4
  - 53
  - 53.4
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 61
- 62
- 63
- 64
- 65
- 66
- 67
- 68
- 69
- 70
- 71
- 72
- 73
- 74
- 75
- 76
- 77
- 78
- 79
- 80
- 81
- 82
- 83
- 84
- 85
- 86
- 87
- 88
- 89
- 90
- 91
- 92
- 93
- 94
- 95
- 96
- 97
- 98
- 99
- 100
- 101
- 102
- 103
- 104
- 105
- 106
- 107
- 108
- 109
- 110
- 111
- 112
- 113
- 114
- 115
- 116
- 117
- 118
- 119
- 120
- 121
- 122
- 123
- 124
- 125
- 126
- 127
- 128
- 130
- 131
- 132
- 133
- 135
- 136
- 137
- 138
- 140
- 143
- 144
- 145
- 146
- 148
- 149
- 150
- 152
- 153
- 154
- 155
- 156
- 159
- 160
- 161
- 162
- 163
- 164
- 165
- 167
- 168
- 169
- 170
- 171
- 173
- 175
- 176
- 177
- 180
- 181
- 182
- 183
- 184
- 185
- 188
- 189
- 190
- 195
- 196
- 197
- 198
- 200
- 205
- 207
- 208
- 210
- 212
- 214
- 215
- 216
- 218
- 219
- 220
- 223
- 224
- 227
- 230
- 231
- 232
- 234
- 240
- 242
- 248
- 250
- 252
- 253
- 258
- 260
- 263
- 264
- 265
- 270
- 272
- 274
- 277
- 280
- 282
- 290
- 292
- 295
- 300
- 302
- 310
- 315
- 318
- 322
- 323
- 327
- 330
- 337
- 340
- 343
- 350
- 360
- 372
- 385
- 400
- 402
- 432
- 440
- 460
- 512
- 550
- 692
- 860
- 1030
Drawing

Clear

work material
- general steel
- Quenched and tempered steel
- high hardness steel
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
- Machinable Ceramics
Details

Clear

Shank Type
- End Mill Shank
- straight shank
- Taper shank
Images

Clear

Tool Material Type
- High-speed steel
- Carbide
- PCD
Details

Clear

With/without Oil Hole
- Available
- NA
Clear

Coating Y/N
- Available
- NA
Clear

Coating Type
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- TiCN
- TiN
- DLC
- Dia Coat
- Non-Coated
- Other
Details

Clear

Narrow search by specifying Manufacturer

- MISUMI (0)
- Economy series (0)
- OSG (27)
- GUHRING (26)
- NACHI(FUJIKOSHI) (19)
- MAPAL (16)
- 7 LEADERS (3)
- UNION TOOL (3)
- WIDIN (2)
- MITSUBISHI MATERIALS (1)
- OMIKOGYO (1)
- ISCAR (0)
- RYOCO SEIKI (0)
- TUNGALOY (0)
- ASAHI TOOLS (0)
- BOTEK (0)
- ISHIHASHI (0)
- NS TOOL (0)
- EIKOSHA (0)
- ATOM (0)
- OKAZAKI SEIKO (0)
- IWATA TOOL (0)
- MITSUBISHI HITACHI TOOL (0)
- DIXI (0)
- FUKUDA (0)
- SANDVIK (0)
- KYOWA SEIKO (0)
- WIDIA (0)
- SUMITOMO ELECTRIC HARDMETAL (0)
- DIJET (0)
- TOYO DRILL (0)
Clear

CAD

- 2D
- 3D
Clear

Related Categories to Straight Shank / End Mill Shank Drills (Carbide)

Top of the page

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

Credit Card Kartu Kredit
Bank TransferTransfer Bank

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Tel:021-8984-0008
Fax:021-8984-0007

Inquiry Permintaan

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

Straight Shank / End Mill Shank Drills (Carbide)（Coating Type：Other）

Configure

Specification/Dimensions

Hole diameter (drill diameter) D(mm)

Overall Length L(mm)

Groove Length L(mm)

work material

Shank Type

Tool Material Type

With/without Oil Hole

Coating Y/N

Coating Type

Narrow search by specifying Manufacturer

CAD

Related Categories to Straight Shank / End Mill Shank Drills (Carbide)

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

Straight Shank / End Mill Shank Drills (Carbide)（Coating Type：Other）

Configure

Specification/Dimensions

Hole diameter (drill diameter) D(mm)

Overall Length L(mm)

Groove Length L(mm)

work material

Shank Type

Tool Material Type

With/without Oil Hole

Coating Y/N

Coating Type

Narrow search by specifying Manufacturer

CAD

Related Categories to Straight Shank / End Mill Shank Drills (Carbide)

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) *Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) *Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan
Kategori / Merek

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB