(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

9.5 Million Products, 1,600 Brands, Free Shipping,
63,000 Stock items for Same Day Shipping

9.5 Juta Produk, 1,600 Merek, Gratis Pengiriman,
63,000 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

Straight Shank / End Mill Shank Drills (Carbide)（work material：Stainless Steel）

145 items

: 30; 45; 60

Days to Ship	All Same day 1 Day(s) or Less 2 Day(s) or Less 8 Day(s) or Less 9 Day(s) or Less 10 Day(s) or Less 11 Day(s) or Less 12 Day(s) or Less 14 Day(s) or Less 15 Day(s) or Less

1
2
3
4
Next >>

BOTEK Gun Drill (Type with Cemented Carbide)

BOTEK

Days to Ship: 8 Day(s) or more
TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Straight Shank / Stub, Regular Model

MISUMI

[Features]
·Capable of high feed and high speed cutting from general steel to stainless steel
·By adopting wavy cutting edge, it achieves outstanding sharpness and strength, and promotes cutting chip discharge
·High-speed cutting is achieved by maintaining outstanding strength and stability by applying conical shape + R-type thinning
·Suppresses chipping by applying chamfer edge treatment to the shoulder
·By adopting diameter plus tolerance, it is effective for high-precision hole finishing closer to hole tolerance

Volume Discount
Days to Ship: 16 Day(s) or more
Straight Shank Drill, 5 × D Type N 2464

GUHRING

[Features]
· Highly versatile carbide solid drill.
· Supports various workpiece materials such as aluminum or general steel.
· FIRE coating achieves longer life.

Days to Ship: 10 Day(s) or more
Standard Solid Drill

ATOM

A high-quality general-purpose drill which can support a wide range of materials, from steel/non-ferrous to resin. Versatile type that allows high performance to be achieved not only in high-speed cutting but also in low-speed cutting.

Days to Ship: 12 Day(s) or more
Aqua Drill EX with Flat Corner R AQDEXZ-R

NACHI(FUJIKOSHI)

[Features]
· Drill with excellent drilling performance for counterboring.
· Ideal for inclined surfaces and tap pilot hole drilling.
· Recommended for hole depth 2D (twice the diameter) or less.

Days to Ship: 11 Day(s) or more
C-UMD, Micro Coat, 2-Flute UNIMAX Drill Bit

UNION TOOL

[Features]
·UT microcoating.
·Tip angle 150
·Tool Material: Carbide

Days to Ship: 12 Day(s) or more
Aqua Micro Drill AQMD

NACHI(FUJIKOSHI)

A drill that is difficult to break and stable for machining.
[Features]
· Employs cemented carbide ideal for small diameter hole drilling.
· A drill with high rigidity is used.
· The cutting load has been reduced by circumferential clearance and thinning.
[Applications]
· Hard to break and capable of stable processing thanks to the high-rigidity shape and the use of carbide alloy ideal for small diameter drilling work.

Days to Ship: 16 Day(s) or more
Aqua Drill EX Oil Hole 20D AQDEXOH20D

NACHI(FUJIKOSHI)

[Features]
· Drill capable of wet machining and MQL machining.
· For highly-efficient hole drilling up to 20 times the drill diameter.

Days to Ship: 11 Day(s) or more
TiAlN Coated Carbide Drill, Regular

MISUMI

[Features]
·Designed with small core diameter to improve cutting chip discharge
·The combination of superfine cemented carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, delivery times, etc.

Volume Discount
Days to Ship: Same day or more
Aqua Drill EX Flat AQDEXZ

NACHI(FUJIKOSHI)

180° flat multifunctional carbide drill.
[Features]
· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.
· Capable of producing an accurate counter-bore surface with one shot.
· Aqua EX coating improves heat and wear resistance, providing long life.
[Applications]
· Can support a wide range of applications such as countersinking on inclined surfaces, correction of eccentric bores, burr-free machining of thin plates, etc.

Days to Ship: 10 Day(s) or more
Super Multi-Drill Internal Refueling, HGS-Model 5D-Type

SUMITOMO ELECTRIC HARDMETAL

Adopts a flute shape that enables good chip discharge with a wide chip pocket. A stable, long life for various work materials and a wide cutting area are realized by applying a DEX coating.

Days to Ship: 16 Day(s) or more
Flat Multi-Drill MDF Type External Lubrication 2D Type

SUMITOMO ELECTRIC HARDMETAL

[Features]
· As well as higher efficiency counterbore machining, this carbide solid drill can be used for various applications such as drilling inclined surfaces or curved surfaces.

Days to Ship: 16 Day(s) or more
Carbide Drill with Internal Coolant Supply (3D Type)_ADO-3D

OSG

[Features]
· Carbide 3D type drill with both high blade tip rigidity and good cutting resistance. Recommended for use on a wide range of materials.
Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life.
Wide flutes for improved chip discharging
Wave-shaped flutes that finely fragment the chips

Days to Ship: 16 Day(s) or more
TiAlN Coated Carbide Small-Diameter Drill, 0.01 mm / 0.05 mm Unit Diameter Designation Model

MISUMI

[Features]
·Ideal for high-precision small-diameter hole drilling
·The shank diameter is unified to 3 mm, enabling high-precision chucking
·The combination of superfine cemented carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining

Volume Discount
Days to Ship: 10 Day(s) or more
Aqua Drill EX Oil Hole 5D AQDEXOH5D

NACHI(FUJIKOSHI)

Aqua Drill EX series solid carbide drills with internal coolant.
[Features]
· Product lineup is for 3D, 5D and 8D boring depths.
· Aqua Drill EX based new flute shape adopted to achieve excellent chipping breakup.
· Aqua EX coating achieves stable long life.
· Capable of stable wet processing and MQL processing.
· For highly-efficient hole drilling up to 5 times the drill diameter.
[Applications]
· Ideal for stable processing of mild steel to high hardness materials, as well as work materials with difficult chip processing.

Days to Ship: 11 Day(s) or more
Aqua Drill EX Stub AQDEXS

NACHI(FUJIKOSHI)

Carbide universal drill capable of stable high efficiency machining across a wide range of speeds from medium-low to high speed.
[Features]
· Shape of the new cutting edge greatly improves chip discharge performance.
· The cutting resistance is reduced to provide stable machining even on small machines.
· A special lubrication function film is provided on the surface layer of the AlCrSi coating to improve the lubricity, heat resistance and abrasion resistance, thereby prolonging the service life.
[Applications]
· The unique thinning shape increases biting and reduces cutting resistance.
· Stable cutting performance even with thin work materials and small low-rigidity processing machines.

Days to Ship: 16 Day(s) or more
Super Multi-Drill External Refueling, GS-Model 4D-Type

SUMITOMO ELECTRIC HARDMETAL

Adopts a flute shape that enables good chip discharge with a wide chip pocket. A stable, long life for various work materials and a wide cutting area are realized by applying a DEX coating.

Days to Ship: 16 Day(s) or more
Super Long Drill

ATOM

ADS standard straight shank drill extra-long type.

Days to Ship: 12 Day(s) or more
Micro Drill, for Stainless Steel

ATOM

Realizes a long life with mild steel, hard-to-cut materials, SUS304, Kovar, inconel, Hastelloy, pure nickel, etc. High-rigidity design which prevents breakage of the drill when machining difficult-to-cut materials.

Days to Ship: 12 Day(s) or more
Micro Drill Short Tip

ATOM

A drill for precision multiporous machining. Supports a wide range of applications, from general steel to nonferrous metals and resins.

Days to Ship: 12 Day(s) or more
Aqua Drill EX Flat Regular AQDEXZR

NACHI(FUJIKOSHI)

180° flat multifunctional carbide drill.
[Features]
· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.
· Capable of producing an accurate counter-bore surface with one shot.
· Aqua EX coating improves heat and wear resistance, providing long life.
· Flat drill for 4D boring depth with excellent drilling performance.
· A centering hole or guide hole is required.
[Applications]
· Countersinking on inclined surfaces and correction of eccentric bores.
· Multifunctional drill that can be used for a wide range of applications, such as thin plate burrless processing, etc.

Days to Ship: 15 Day(s) or more
TiAlN Coated Carbide 3-Flute Drill, Stub Model, Regular

MISUMI

3-flute drill with outstanding afferent * If the chip flow is not good, perform the appropriate step process depending on the chip flow condition

Volume Discount
Days to Ship: 16 Day(s) or more
TiAlN Coated Carbide Drill, Stub

MISUMI

[Features]
·Designed with small core diameter to improve cutting chip discharge
·The combination of superfine cemented carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount
Days to Ship: 16 Day(s) or more
Aqua Drill EX Regular AQDEXR

NACHI(FUJIKOSHI)

Carbide universal drill capable of stable high efficiency machining across a wide range of speeds from medium-low to high speed.
[Features]
· Shape of the new cutting edge greatly improves chip discharge performance.
· The cutting resistance is reduced to provide stable machining even on small machines.
· A special lubrication function film is provided on the surface layer of the AlCrSi coating.
· Longer life by improving lubricity and heat/abrasion resistance.
· The unique thinning shape increases biting and reduces cutting resistance.
[Applications]
· Ideal for thin work materials and small low-rigidity processing machines.

Days to Ship: 16 Day(s) or more
Aqua Drill EX Oil Hole 3D AQDEXOH3D

NACHI(FUJIKOSHI)

Aqua Drill EX series solid carbide drills with internal coolant.
[Features]
· Aqua Drill EX based new flute shape adopted to achieve excellent chipping breakup.
· Aqua EX coating achieves stable long life.
[Applications]
· Stable processing of mild steel to high hardness materials.

Days to Ship: 11 Day(s) or more
Aqua Drill EX Oil Hole 8D AQDEXOH8D

NACHI(FUJIKOSHI)

Aqua Drill EX series solid carbide drills with internal coolant.
[Features]
· Product lineup is for 3D, 5D and 8D boring depths.
· Aqua Drill EX based new flute shape adopted to achieve excellent chipping breakup.
· Aqua EX coating achieves stable long life.
[Applications]
· Stable processing of mild steel to high hardness materials.

Days to Ship: 16 Day(s) or more
Solid Carbide Drills for Stainless (Micro Revolution Drill)_MRS-GDL

OSG

Small diameter carbide drill long type for stainless steel machining. Stainless steel processing provides stable durability.

Days to Ship: 16 Day(s) or more
Carbide OH Non-Step Borer 3D 03WHNSB□□□□-TH

MITSUBISHI HITACHI TOOL

Thanks to the effect of the TH coating, the tool lifespan is long even in the high-speed range where the cutting temperature is high.
Uses TH coating with excellent oxidation resistance and abrasion resistance.
Non-step and smooth processing with the NSB groove shape.
High precision tip blade
Supports high precision shank and shrink fitting.
Eco-friendly MQL (mist) processing is also outstanding performance.

Days to Ship: 8 Day(s) or more
Carbide OH Non-Step Borer 5D 05WHNSB□□□□-TH

MITSUBISHI HITACHI TOOL

The effects of the TH coating provide a long service life even at high speeds where cutting temperature increases

Days to Ship: 16 Day(s) or more
TFD Carbide TiCN Coated Drill Bit

IWATA TOOL

Highly circular, not requiring a reamer bit after drilling. Capable of high-efficiency and high-precision machining thanks to its high-rigidity groove shape and stub groove length. Ideal for drilling tap pilot holes.

Days to Ship: 16 Day(s) or more
Micro Drill Standard Tip Length

ATOM

A drill for precision multiporous machining. (Min. diameter φ0.02), Can be used for a wide range of applications including general steel, non-ferrous metals, and resins.

Days to Ship: 16 Day(s) or more
End Mill Shank Type 5xD RT100U 5515

GUHRING

[Features]
· Supports a wide range of machining and enables high-efficiency, high-speed machining.

Days to Ship: 10 Day(s) or more
Straight Shank Drill, 5 × D Type N 732

GUHRING

Highly versatile carbide solid drill. Supports various workpiece materials such as aluminum or general steel.

Days to Ship: 10 Day(s) or more
Aqua Drill EX Flat Long Shank AQDEXZLS

NACHI(FUJIKOSHI)

180° flat multifunctional carbide drill.
[Features]
· Flat drill 10D type with excellent drilling performance.
· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.
· Capable of producing an accurate counter-bore surface with one shot.
· Aqua EX coating improves heat and wear resistance, providing long life.
[Applications]
· A multi-functional drill that is capable of supporting a wide range of applications such as countersinking on inclined surfaces, correction of eccentric bores, burr-free machining of thin plates, etc.

Days to Ship: 11 Day(s) or more
Aqua Drill EX Oil Hole Pilot AQDEXOHPLT

NACHI(FUJIKOSHI)

[Features]
· Drill for drilling guide holes.
· High bite performance guide hole improves centering during deep hole drilling, giving improved drilling performance.

Days to Ship: 11 Day(s) or more
Carbide Drill with Internal Coolant Supply (15D Type)_ADO-15D

OSG

[Features]
· Carbide 15D type drill with both high tip rigidity and good cutting resistance. Recommended for use on a wide range of materials.
Uses an EgiAs coating which boasts excellent wear resistance and toughness, helping achieve a longer tool life.
Those drills with oil holes use an internal oil supply system, enabling use in a wide range of applications. They also provide higher speed performance and have a longer service life.
The use of a middle margin improves stability when machining deep holes

Days to Ship: 16 Day(s) or more
Aqua Drill EX Power Feed 4D PF4D

NACHI(FUJIKOSHI)

[Features]
· A 4D drill bit that realizes high accuracy, long life machining with ultra-high feed machining with machining centers or lathes that can easily become clogged with scrap.

Days to Ship: 16 Day(s) or more
TS Coated Carbide Composite Spiral Drill, Stub Model

MISUMI

[Features]
·Designed with helix angle of 30° near the tip and 20° near the shank
·The 20° section has large core diameter for improved tool durability
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, delivery times, etc.

Volume Discount
Days to Ship: 16 Day(s) or more
TiAlN Coated Carbide Burnishing Bladed Drill, Stub (No Oil Holes), Regular (with Oil Holes)

MISUMI

[Features]
·By providing a margin with burnishing flute on the outer periphery, it is possible to perform hole drilling and hole finishing at the same time
·Supports a wide range of work materials from general steel to stainless steel
·Internal lubrication supply efficiently discharges cutting chip and improves tool lifespan (TAC－HBNESDR)
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount
Days to Ship: 16 Day(s) or more
TiAlN Coated Carbide Double Margin Drill, Regular

MISUMI

[Features]
·By providing 4 margins on the outer periphery of the drill, the guide performance during chamfer and penetration is improved, enabling highly straight and stable drilling
·Supports a wide range of work materials from general steel to stainless steel
·The combination of superfine cemented carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount
Days to Ship: 16 Day(s) or more
TiAlN Coated Carbide Drill, Corrugated Cutting Edge / Stub

MISUMI

[Features]
·By adopting wavy cutting edge, it achieves outstanding sharpness and strength, and promotes cutting chip discharge
·Demonstrates high centripetal force by applying three rake and R-type thinning
·Designed with larger core diameter than that of TAC-ESDBA to improve durability
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount
Days to Ship: 16 Day(s) or more
TiAlN Coated Carbide Drill, Corrugated Cutting Edge / Regular

MISUMI

By applying three rake + R thinning, it demonstrates a high level of afferent.

Volume Discount
Days to Ship: 16 Day(s) or more
TiAlN Coated Carbide Drill with Corner Radius, Stub Model, Regular Model

MISUMI

[Features]
·Corner radius treatment suppresses chipping
·By adopting wavy flute shape, it achieves outstanding cutting sharpness and strength, and promotes cutting chip discharge
·Demonstrates high centripetal force by applying three rake + R thinning
·The combination of superfine cemented carbide alloy and TiAlN coating provides excellent abrasion resistance and enables high-speed machining
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount
Days to Ship: 16 Day(s) or more
TiAlN Coated Carbide Drill with Corner Radius, Straight Shank / Stub Model, Regular

MISUMI

[Features]
·Corner radius treatment suppresses chipping
·By adopting wavy flute shape, it achieves outstanding cutting sharpness and strength, and promotes cutting chip discharge
·Demonstrates high centripetal force by applying three rake + R thinning
·Combination of ultra-fine grain cemented carbide alloy + TiAlN coating provides excellent abrasion resistance and enables high-speed machining
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount
Days to Ship: 16 Day(s) or more
TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Stub

MISUMI

[Features]
·Capable of high feed and high speed cutting from general steel to stainless steel
·By adopting wavy cutting edge, it achieves outstanding sharpness and strength, and promotes cutting chip discharge
·High-speed cutting is achieved by maintaining outstanding strength and stability by applying conical shape + R-type thinning
·Suppresses chipping by applying chamfer edge treatment to the shoulder
·By adopting diameter plus tolerance, it is effective for high-precision hole finishing closer to hole tolerance

Volume Discount
Days to Ship: 16 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	11 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	11 Day(s) or more

Days to Ship:	Same day or more

Days to Ship:	10 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	11 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	15 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	11 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	11 Day(s) or more

Days to Ship:	11 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more


Brand
Product Series
Days to Ship
Hole diameter (drill diameter) D(mm)
Overall Length L(mm)
Groove Length L(mm)
work material
Shank Type
Tool Material Type
With/without Oil Hole
Coating Y/N
Coating Type


Brand	BOTEK	MISUMI	GUHRING	ATOM	NACHI(FUJIKOSHI)	UNION TOOL	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	MISUMI	NACHI(FUJIKOSHI)	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	OSG	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	SUMITOMO ELECTRIC HARDMETAL	ATOM	ATOM	ATOM	NACHI(FUJIKOSHI)	MISUMI	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	MITSUBISHI HITACHI TOOL	MITSUBISHI HITACHI TOOL	IWATA TOOL	ATOM	GUHRING	GUHRING	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	NACHI(FUJIKOSHI)	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI
Product Series	BOTEK Gun Drill (Type with Cemented Carbide)	TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Straight Shank / Stub, Regular Model	Straight Shank Drill, 5 × D Type N 2464	Standard Solid Drill	Aqua Drill EX with Flat Corner R AQDEXZ-R	C-UMD, Micro Coat, 2-Flute UNIMAX Drill Bit	Aqua Micro Drill AQMD	Aqua Drill EX Oil Hole 20D AQDEXOH20D	TiAlN Coated Carbide Drill, Regular	Aqua Drill EX Flat AQDEXZ	Super Multi-Drill Internal Refueling, HGS-Model 5D-Type	Flat Multi-Drill MDF Type External Lubrication 2D Type	Carbide Drill with Internal Coolant Supply (3D Type)_ADO-3D	TiAlN Coated Carbide Small-Diameter Drill, 0.01 mm / 0.05 mm Unit Diameter Designation Model	Aqua Drill EX Oil Hole 5D AQDEXOH5D	Aqua Drill EX Stub AQDEXS	Super Multi-Drill External Refueling, GS-Model 4D-Type	Super Long Drill	Micro Drill, for Stainless Steel	Micro Drill Short Tip	Aqua Drill EX Flat Regular AQDEXZR	TiAlN Coated Carbide 3-Flute Drill, Stub Model, Regular	TiAlN Coated Carbide Drill, Stub	Aqua Drill EX Regular AQDEXR	Aqua Drill EX Oil Hole 3D AQDEXOH3D	Aqua Drill EX Oil Hole 8D AQDEXOH8D	Solid Carbide Drills for Stainless (Micro Revolution Drill)_MRS-GDL	Carbide OH Non-Step Borer 3D 03WHNSB□□□□-TH	Carbide OH Non-Step Borer 5D 05WHNSB□□□□-TH	TFD Carbide TiCN Coated Drill Bit	Micro Drill Standard Tip Length	End Mill Shank Type 5xD RT100U 5515	Straight Shank Drill, 5 × D Type N 732	Aqua Drill EX Flat Long Shank AQDEXZLS	Aqua Drill EX Oil Hole Pilot AQDEXOHPLT	Carbide Drill with Internal Coolant Supply (15D Type)_ADO-15D	Aqua Drill EX Power Feed 4D PF4D	TS Coated Carbide Composite Spiral Drill, Stub Model	TiAlN Coated Carbide Burnishing Bladed Drill, Stub (No Oil Holes), Regular (with Oil Holes)	TiAlN Coated Carbide Double Margin Drill, Regular	TiAlN Coated Carbide Drill, Corrugated Cutting Edge / Stub	TiAlN Coated Carbide Drill, Corrugated Cutting Edge / Regular	TiAlN Coated Carbide Drill with Corner Radius, Stub Model, Regular Model	TiAlN Coated Carbide Drill with Corner Radius, Straight Shank / Stub Model, Regular	TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Stub
Days to Ship	8 Day(s) or more	16 Day(s) or more	10 Day(s) or more	12 Day(s) or more	11 Day(s) or more	12 Day(s) or more	16 Day(s) or more	11 Day(s) or more	Same day or more	10 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	10 Day(s) or more	11 Day(s) or more	16 Day(s) or more	16 Day(s) or more	12 Day(s) or more	12 Day(s) or more	12 Day(s) or more	15 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	11 Day(s) or more	16 Day(s) or more	16 Day(s) or more	8 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	10 Day(s) or more	10 Day(s) or more	11 Day(s) or more	11 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more
Hole diameter (drill diameter) D(mm)	3 ～ 20	3 ～ 13	1 ～ 12	0.3 ～ Over 36.5, and 38.0 or less	3 ～ 12	0.11 ～ 3	0.2 ～ 1.99	1 ～ 10	0.3 ～ 13	0.5 ～ 20	7	-	2 ～ 20	0.38 ～ 2.7	1 ～ 16	2 ～ 16	1 ～ 10	0.3 ～ 13	0.1 ～ 3	0.1 ～ 3	3 ～ 20	2 ～ 13	0.3 ～ 6	2 ～ 16	3 ～ 16	3 ～ 16	0.44 ～ 3	3 ～ 12	12	0.3 ～ 3	0.02 ～ 3	3 ～ 20	1 ～ 12	3 ～ 20	1.015 ～ 12.03	3 ～ 12	2 ～ 10	3 ～ 12	3 ～ 13	1 ～ 12	3 ～ 13	3 ～ 13	8.5	3 ～ 13	3 ～ 8
Overall Length L(mm)	150 ～ 500	46 ～ 137	34 ～ 151	30 ～ 100	50 ～ 90	38	38 ～ 47	71 ～ 280	38 ～ 124	47 ～ 145	109	-	66 ～ 165	38	56 ～ 194	45 ～ 112	49 ～ 105	75 ～ 250	38 ～ 45	38	60 ～ 195	46 ～ 124	38 ～ 66	49 ～ 160	68 ～ 146	81 ～ 242	38 ～ 66	69 ～ 123	156	50	38 ～ 50	66 ～ 153	34 ～ 151	100 ～ 250	54 ～ 122	105 ～ 280	49 ～ 98	50 ～ 115	62 ～ 124	45 ～ 118	66 ～ 107	66 ～ 124	89	49 ～ 124	62 ～ 79
Groove Length L(mm)	60 ～ 340	16 ～ 78	12 ～ 101	4 ～ 50	14 ～ 54	1.2 ～ 12	2.5 ～ 15	23 ～ 230	3 ～ 77	1.65 ～ 90	56	16 ～ 43.2	12 ～ 100	6 ～ 12	8 ～ 128	8 ～ 55	12 ～ 60	15 ～ 120	1 ～ 15	0.6 ～ 12	19 ～ 126	12 ～ 77	2 ～ 28	15 ～ 96	17 ～ 80	33 ～ 176	6 ～ 36	19 ～ 59	93	1.8 ～ 16.8	0.2 ～ 25	28 ～ 101	12 ～ 101	14 ～ 90	3.3 ～ 54	55 ～ 215	-	20 ～ 55	20 ～ 71	12 ～ 71	20 ～ 60	28 ～ 77	47	16 ～ 77	20 ～ 41
work material	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[◎]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[◎]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[◎]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[◎]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[◎]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[◎]	Stainless Steel[◎]	Stainless Steel[◎]	Stainless Steel[◎]	Stainless Steel[◎]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]	Stainless Steel[○]
Shank Type	-	straight shank	straight shank	straight shank	straight shank	End Mill Shank	End Mill Shank	straight shank	End Mill Shank	End Mill Shank / straight shank	straight shank	End Mill Shank / straight shank	End Mill Shank	End Mill Shank	End Mill Shank / straight shank	End Mill Shank / straight shank	End Mill Shank / straight shank	straight shank	End Mill Shank	End Mill Shank	-	End Mill Shank	End Mill Shank	End Mill Shank / straight shank	End Mill Shank / straight shank	End Mill Shank / straight shank	End Mill Shank / straight shank	End Mill Shank / straight shank	straight shank	End Mill Shank	End Mill Shank	End Mill Shank	straight shank	End Mill Shank	straight shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	End Mill Shank	straight shank	End Mill Shank
Tool Material Type	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide	Carbide
With/without Oil Hole	Available	NA	NA	NA	NA	NA	NA	Available	NA	NA	Available	NA	Available	NA	Available	-	NA	NA	NA	NA	-	NA	NA	NA	Available	Available	NA	Available	Available	NA	NA	NA	NA	Available / NA	Available	Available	-	NA	Available / NA	NA	NA	NA	NA	NA	NA
Coating Y/N	NA	Available	Available	NA	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	NA	Available	NA	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	NA	Available	NA	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available
Coating Type	-	TiAlN	Other	Non-Coated	For General Steels (AlCrN, etc.)	Other	Other	For General Steels (AlCrN, etc.)	TiAlN	Other	For High Hardness (Silicon Group)	-	Other	TiAlN	Other	Other	For High Hardness (Silicon Group)	Non-Coated	For General Steels (AlCrN, etc.)	Non-Coated	Other	TiAlN	TiAlN	Other	Other	Other	Other	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiCN	Non-Coated	Other	-	Other	For General Steels (AlCrN, etc.)	Other	Other	-	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN

1
2
3
4
Next >>

Configure

Specification/Dimensions

Hole diameter (drill diameter) D(mm)
- 0～0.995
  - 0
  - 0.01
  - 0.015
  - 0.02
  - 0.025
  - 0.03
  - 0.035
  - 0.04
  - 0.045
  - 0.05
  - 0.055
  - 0.06
  - 0.065
  - 0.07
  - 0.075
  - 0.08
  - 0.085
  - 0.09
  - 0.095
  - 0.1
  - 0.105
  - 0.11
  - 0.115
  - 0.12
  - 0.125
  - 0.13
  - 0.135
  - 0.14
  - 0.145
  - 0.15
  - 0.155
  - 0.16
  - 0.165
  - 0.17
  - 0.175
  - 0.18
  - 0.185
  - 0.19
  - 0.195
  - 0.2
  - 0.205
  - 0.21
  - 0.215
  - 0.22
  - 0.225
  - 0.23
  - 0.235
  - 0.24
  - 0.245
  - 0.25
  - 0.255
  - 0.26
  - 0.265
  - 0.27
  - 0.275
  - 0.28
  - 0.285
  - 0.29
  - 0.295
  - 0.3
  - 0.305
  - 0.31
  - 0.315
  - 0.32
  - 0.325
  - 0.33
  - 0.335
  - 0.34
  - 0.345
  - 0.35
  - 0.355
  - 0.36
  - 0.365
  - 0.37
  - 0.375
  - 0.38
  - 0.385
  - 0.39
  - 0.395
  - 0.4
  - 0.405
  - 0.41
  - 0.415
  - 0.42
  - 0.425
  - 0.43
  - 0.435
  - 0.44
  - 0.445
  - 0.45
  - 0.455
  - 0.46
  - 0.465
  - 0.47
  - 0.475
  - 0.48
  - 0.485
  - 0.49
  - 0.495
  - 0.5
  - 0.505
  - 0.51
  - 0.515
  - 0.52
  - 0.525
  - 0.53
  - 0.535
  - 0.54
  - 0.545
  - 0.55
  - 0.555
  - 0.56
  - 0.565
  - 0.57
  - 0.575
  - 0.58
  - 0.585
  - 0.59
  - 0.595
  - 0.6
  - 0.605
  - 0.61
  - 0.615
  - 0.62
  - 0.625
  - 0.63
  - 0.635
  - 0.64
  - 0.645
  - 0.65
  - 0.655
  - 0.66
  - 0.665
  - 0.67
  - 0.675
  - 0.68
  - 0.685
  - 0.69
  - 0.695
  - 0.7
  - 0.705
  - 0.71
  - 0.715
  - 0.72
  - 0.725
  - 0.73
  - 0.735
  - 0.74
  - 0.745
  - 0.75
  - 0.755
  - 0.76
  - 0.765
  - 0.77
  - 0.775
  - 0.78
  - 0.785
  - 0.79
  - 0.795
  - 0.8
  - 0.805
  - 0.81
  - 0.815
  - 0.82
  - 0.825
  - 0.83
  - 0.835
  - 0.84
  - 0.845
  - 0.85
  - 0.855
  - 0.86
  - 0.865
  - 0.87
  - 0.875
  - 0.88
  - 0.885
  - 0.89
  - 0.895
  - 0.9
  - 0.905
  - 0.91
  - 0.915
  - 0.92
  - 0.925
  - 0.93
  - 0.935
  - 0.94
  - 0.945
  - 0.95
  - 0.955
  - 0.96
  - 0.965
  - 0.97
  - 0.975
  - 0.98
  - 0.985
  - 0.99
  - 0.995
- 1～1.995
  - 1
  - 1.005
  - 1.01
  - 1.015
  - 1.02
  - 1.025
  - 1.03
  - 1.035
  - 1.04
  - 1.045
  - 1.05
  - 1.055
  - 1.06
  - 1.065
  - 1.07
  - 1.075
  - 1.08
  - 1.085
  - 1.09
  - 1.095
  - 1.1
  - 1.105
  - 1.11
  - 1.115
  - 1.12
  - 1.125
  - 1.13
  - 1.135
  - 1.14
  - 1.145
  - 1.15
  - 1.155
  - 1.16
  - 1.165
  - 1.17
  - 1.175
  - 1.18
  - 1.185
  - 1.19
  - 1.195
  - 1.2
  - 1.205
  - 1.21
  - 1.215
  - 1.22
  - 1.225
  - 1.23
  - 1.235
  - 1.24
  - 1.245
  - 1.25
  - 1.255
  - 1.26
  - 1.265
  - 1.27
  - 1.275
  - 1.28
  - 1.285
  - 1.29
  - 1.295
  - 1.3
  - 1.305
  - 1.31
  - 1.315
  - 1.32
  - 1.325
  - 1.33
  - 1.335
  - 1.34
  - 1.345
  - 1.35
  - 1.355
  - 1.36
  - 1.365
  - 1.37
  - 1.375
  - 1.38
  - 1.385
  - 1.39
  - 1.395
  - 1.4
  - 1.405
  - 1.41
  - 1.415
  - 1.42
  - 1.425
  - 1.43
  - 1.435
  - 1.44
  - 1.445
  - 1.45
  - 1.455
  - 1.46
  - 1.465
  - 1.47
  - 1.475
  - 1.48
  - 1.485
  - 1.49
  - 1.495
  - 1.5
  - 1.505
  - 1.51
  - 1.515
  - 1.52
  - 1.525
  - 1.53
  - 1.535
  - 1.54
  - 1.545
  - 1.55
  - 1.555
  - 1.56
  - 1.565
  - 1.57
  - 1.575
  - 1.58
  - 1.585
  - 1.59
  - 1.595
  - 1.6
  - 1.605
  - 1.61
  - 1.615
  - 1.62
  - 1.625
  - 1.63
  - 1.635
  - 1.64
  - 1.645
  - 1.65
  - 1.655
  - 1.66
  - 1.665
  - 1.67
  - 1.675
  - 1.68
  - 1.685
  - 1.69
  - 1.695
  - 1.7
  - 1.705
  - 1.71
  - 1.715
  - 1.72
  - 1.725
  - 1.73
  - 1.735
  - 1.74
  - 1.745
  - 1.75
  - 1.755
  - 1.76
  - 1.765
  - 1.77
  - 1.775
  - 1.78
  - 1.785
  - 1.79
  - 1.795
  - 1.8
  - 1.805
  - 1.81
  - 1.815
  - 1.82
  - 1.825
  - 1.83
  - 1.835
  - 1.84
  - 1.845
  - 1.85
  - 1.855
  - 1.86
  - 1.865
  - 1.87
  - 1.875
  - 1.88
  - 1.885
  - 1.89
  - 1.895
  - 1.9
  - 1.905
  - 1.91
  - 1.915
  - 1.92
  - 1.925
  - 1.93
  - 1.935
  - 1.94
  - 1.945
  - 1.95
  - 1.955
  - 1.96
  - 1.965
  - 1.97
  - 1.975
  - 1.98
  - 1.984
  - 1.985
  - 1.99
  - 1.995
- 2～2.99
  - 2
  - 2.01
  - 2.015
  - 2.02
  - 2.03
  - 2.04
  - 2.05
  - 2.06
  - 2.07
  - 2.08
  - 2.09
  - 2.1
  - 2.11
  - 2.115
  - 2.12
  - 2.13
  - 2.14
  - 2.15
  - 2.16
  - 2.17
  - 2.18
  - 2.19
  - 2.2
  - 2.21
  - 2.215
  - 2.22
  - 2.23
  - 2.24
  - 2.25
  - 2.26
  - 2.27
  - 2.28
  - 2.29
  - 2.3
  - 2.31
  - 2.315
  - 2.32
  - 2.33
  - 2.34
  - 2.35
  - 2.36
  - 2.37
  - 2.38
  - 2.383
  - 2.39
  - 2.4
  - 2.41
  - 2.415
  - 2.42
  - 2.43
  - 2.439
  - 2.44
  - 2.45
  - 2.46
  - 2.47
  - 2.48
  - 2.489
  - 2.49
  - 2.5
  - 2.51
  - 2.515
  - 2.52
  - 2.53
  - 2.54
  - 2.55
  - 2.56
  - 2.57
  - 2.578
  - 2.58
  - 2.59
  - 2.6
  - 2.61
  - 2.615
  - 2.62
  - 2.63
  - 2.64
  - 2.642
  - 2.65
  - 2.66
  - 2.67
  - 2.68
  - 2.69
  - 2.7
  - 2.705
  - 2.71
  - 2.715
  - 2.72
  - 2.73
  - 2.74
  - 2.75
  - 2.76
  - 2.77
  - 2.779
  - 2.78
  - 2.79
  - 2.8
  - 2.81
  - 2.815
  - 2.82
  - 2.83
  - 2.84
  - 2.85
  - 2.86
  - 2.87
  - 2.88
  - 2.89
  - 2.9
  - 2.91
  - 2.915
  - 2.92
  - 2.93
  - 2.94
  - 2.947
  - 2.95
  - 2.96
  - 2.97
  - 2.98
  - 2.99
- 3～3.99
  - 3
  - 3.01
  - 3.02
  - 3.03
  - 3.04
  - 3.048
  - 3.05
  - 3.06
  - 3.07
  - 3.08
  - 3.09
  - 3.1
  - 3.11
  - 3.12
  - 3.13
  - 3.14
  - 3.15
  - 3.16
  - 3.17
  - 3.175
  - 3.18
  - 3.19
  - 3.2
  - 3.21
  - 3.22
  - 3.23
  - 3.24
  - 3.25
  - 3.26
  - 3.264
  - 3.27
  - 3.28
  - 3.29
  - 3.3
  - 3.31
  - 3.32
  - 3.33
  - 3.34
  - 3.35
  - 3.36
  - 3.37
  - 3.38
  - 3.39
  - 3.4
  - 3.41
  - 3.42
  - 3.43
  - 3.44
  - 3.45
  - 3.455
  - 3.46
  - 3.47
  - 3.48
  - 3.49
  - 3.5
  - 3.51
  - 3.52
  - 3.53
  - 3.54
  - 3.55
  - 3.56
  - 3.57
  - 3.571
  - 3.58
  - 3.59
  - 3.6
  - 3.61
  - 3.62
  - 3.63
  - 3.64
  - 3.65
  - 3.658
  - 3.66
  - 3.67
  - 3.68
  - 3.69
  - 3.7
  - 3.71
  - 3.72
  - 3.73
  - 3.734
  - 3.74
  - 3.75
  - 3.76
  - 3.77
  - 3.78
  - 3.79
  - 3.8
  - 3.81
  - 3.82
  - 3.83
  - 3.84
  - 3.85
  - 3.86
  - 3.87
  - 3.88
  - 3.89
  - 3.9
  - 3.91
  - 3.92
  - 3.93
  - 3.94
  - 3.95
  - 3.96
  - 3.97
  - 3.98
  - 3.99
- 4～4.99
  - 4
  - 4.01
  - 4.02
  - 4.03
  - 4.039
  - 4.04
  - 4.05
  - 4.06
  - 4.07
  - 4.08
  - 4.09
  - 4.1
  - 4.11
  - 4.12
  - 4.13
  - 4.14
  - 4.15
  - 4.16
  - 4.17
  - 4.176
  - 4.18
  - 4.19
  - 4.2
  - 4.21
  - 4.217
  - 4.22
  - 4.23
  - 4.24
  - 4.25
  - 4.26
  - 4.27
  - 4.28
  - 4.29
  - 4.3
  - 4.31
  - 4.32
  - 4.33
  - 4.34
  - 4.35
  - 4.36
  - 4.366
  - 4.37
  - 4.38
  - 4.39
  - 4.4
  - 4.41
  - 4.42
  - 4.43
  - 4.44
  - 4.45
  - 4.46
  - 4.47
  - 4.48
  - 4.49
  - 4.5
  - 4.51
  - 4.52
  - 4.53
  - 4.54
  - 4.55
  - 4.56
  - 4.57
  - 4.58
  - 4.59
  - 4.6
  - 4.61
  - 4.62
  - 4.623
  - 4.63
  - 4.64
  - 4.65
  - 4.66
  - 4.67
  - 4.68
  - 4.69
  - 4.7
  - 4.71
  - 4.72
  - 4.73
  - 4.74
  - 4.75
  - 4.76
  - 4.763
  - 4.77
  - 4.78
  - 4.79
  - 4.8
  - 4.81
  - 4.82
  - 4.83
  - 4.837
  - 4.84
  - 4.85
  - 4.852
  - 4.86
  - 4.864
  - 4.87
  - 4.88
  - 4.89
  - 4.9
  - 4.91
  - 4.92
  - 4.93
  - 4.94
  - 4.95
  - 4.96
  - 4.97
  - 4.98
  - 4.99
- 5～5.99
  - 5
  - 5.01
  - 5.02
  - 5.03
  - 5.04
  - 5.05
  - 5.06
  - 5.07
  - 5.08
  - 5.09
  - 5.1
  - 5.106
  - 5.11
  - 5.12
  - 5.13
  - 5.14
  - 5.15
  - 5.159
  - 5.16
  - 5.17
  - 5.18
  - 5.19
  - 5.2
  - 5.21
  - 5.22
  - 5.23
  - 5.24
  - 5.25
  - 5.26
  - 5.27
  - 5.28
  - 5.29
  - 5.3
  - 5.31
  - 5.32
  - 5.33
  - 5.34
  - 5.35
  - 5.36
  - 5.37
  - 5.38
  - 5.39
  - 5.4
  - 5.41
  - 5.42
  - 5.43
  - 5.44
  - 5.45
  - 5.46
  - 5.47
  - 5.48
  - 5.49
  - 5.49999999999999
  - 5.5
  - 5.51
  - 5.52
  - 5.53
  - 5.54
  - 5.55
  - 5.558
  - 5.56
  - 5.565
  - 5.57
  - 5.58
  - 5.59
  - 5.59999999999999
  - 5.6
  - 5.61
  - 5.616
  - 5.62
  - 5.63
  - 5.64
  - 5.65
  - 5.66
  - 5.67
  - 5.68
  - 5.69
  - 5.69999999999999
  - 5.7
  - 5.71
  - 5.72
  - 5.73
  - 5.74
  - 5.75
  - 5.76
  - 5.77
  - 5.78
  - 5.79
  - 5.79999999999999
  - 5.8
  - 5.81
  - 5.82
  - 5.83
  - 5.84
  - 5.85
  - 5.86
  - 5.87
  - 5.88
  - 5.89
  - 5.89999999999999
  - 5.9
  - 5.91
  - 5.92
  - 5.93
  - 5.94
  - 5.95
  - 5.954
  - 5.96
  - 5.97
  - 5.98
  - 5.99
- 6～6.95
  - 6
  - 6.01
  - 6.02
  - 6.03
  - 6.04
  - 6.05
  - 6.06
  - 6.07
  - 6.08
  - 6.09
  - 6.09999999999999
  - 6.1
  - 6.13
  - 6.15
  - 6.19999999999999
  - 6.2
  - 6.23
  - 6.25
  - 6.29999999999999
  - 6.3
  - 6.33
  - 6.35
  - 6.35 (¼")
  - 6.365
  - 6.375
  - 6.39999999999999
  - 6.4
  - 6.43
  - 6.45
  - 6.49999999999999
  - 6.5
  - 6.528
  - 6.53
  - 6.55
  - 6.59999999999999
  - 6.6
  - 6.63
  - 6.65
  - 6.69999999999999
  - 6.7
  - 6.73
  - 6.746
  - 6.75
  - 6.8
  - 6.83
  - 6.85
  - 6.89999999999999
  - 6.9
  - 6.93
  - 6.95
- 7～7.98
  - 7
  - 7.01
  - 7.02
  - 7.03
  - 7.04
  - 7.05
  - 7.06
  - 7.07
  - 7.08
  - 7.09
  - 7.09999999999999
  - 7.1
  - 7.13
  - 7.14
  - 7.145
  - 7.19999999999999
  - 7.2
  - 7.23
  - 7.25
  - 7.29999999999999
  - 7.3
  - 7.33
  - 7.35
  - 7.36
  - 7.38
  - 7.39999999999999
  - 7.4
  - 7.43
  - 7.45
  - 7.49999999999999
  - 7.5
  - 7.52
  - 7.53
  - 7.54
  - 7.541
  - 7.55
  - 7.59999999999999
  - 7.6
  - 7.63
  - 7.69999999999999
  - 7.7
  - 7.73
  - 7.75
  - 7.79999999999999
  - 7.8
  - 7.83
  - 7.85
  - 7.89999999999999
  - 7.9
  - 7.93
  - 7.938
  - 7.94
  - 7.95
  - 7.953
  - 7.98
- 8～8.93
  - 8
  - 8.01
  - 8.02
  - 8.03
  - 8.04
  - 8.05
  - 8.06
  - 8.07
  - 8.08
  - 8.09
  - 8.09999999999999
  - 8.1
  - 8.13
  - 8.19999999999999
  - 8.2
  - 8.23
  - 8.25
  - 8.29999999999998
  - 8.3
  - 8.33
  - 8.334
  - 8.39999999999998
  - 8.4
  - 8.43
  - 8.433
  - 8.5
  - 8.50000000000001
  - 8.53
  - 8.58
  - 8.59999999999998
  - 8.6
  - 8.63
  - 8.69999999999998
  - 8.7
  - 8.73
  - 8.733
  - 8.75
  - 8.79999999999998
  - 8.8
  - 8.80000000000001
  - 8.83
  - 8.85
  - 8.89999999999998
  - 8.9
  - 8.90000000000001
  - 8.93
- 9～9.97
  - 9
  - 9.01
  - 9.02
  - 9.03
  - 9.04
  - 9.05
  - 9.06
  - 9.07
  - 9.08
  - 9.09
  - 9.09999999999998
  - 9.1
  - 9.129
  - 9.13
  - 9.19999999999998
  - 9.2
  - 9.20000000000001
  - 9.21
  - 9.23
  - 9.24
  - 9.25
  - 9.26
  - 9.29999999999998
  - 9.3
  - 9.30000000000001
  - 9.33
  - 9.347
  - 9.36
  - 9.38
  - 9.39999999999998
  - 9.4
  - 9.40000000000001
  - 9.43
  - 9.49999999999998
  - 9.5
  - 9.50000000000001
  - 9.52
  - 9.525
  - 9.53
  - 9.54
  - 9.55
  - 9.59999999999998
  - 9.6
  - 9.60000000000001
  - 9.63
  - 9.69999999999998
  - 9.7
  - 9.70000000000001
  - 9.73
  - 9.75
  - 9.79999999999998
  - 9.8
  - 9.80000000000001
  - 9.83
  - 9.85
  - 9.89999999999998
  - 9.9
  - 9.90000000000001
  - 9.92
  - 9.921
  - 9.93
  - 9.95
  - 9.97
- 10～10.93
  - 10
  - 10.01
  - 10.02
  - 10.03
  - 10.04
  - 10.05
  - 10.06
  - 10.07
  - 10.08
  - 10.09
  - 10.1
  - 10.13
  - 10.2
  - 10.23
  - 10.25
  - 10.3
  - 10.32
  - 10.33
  - 10.4
  - 10.43
  - 10.5
  - 10.53
  - 10.6
  - 10.63
  - 10.7
  - 10.716
  - 10.72
  - 10.73
  - 10.75
  - 10.8
  - 10.83
  - 10.85
  - 10.9
  - 10.93
- 11～11.95
  - 11
  - 11.01
  - 11.02
  - 11.03
  - 11.04
  - 11.05
  - 11.06
  - 11.07
  - 11.08
  - 11.09
  - 11.1
  - 11.11
  - 11.113
  - 11.13
  - 11.133
  - 11.2
  - 11.22
  - 11.23
  - 11.24
  - 11.3
  - 11.33
  - 11.36
  - 11.38
  - 11.4
  - 11.43
  - 11.5
  - 11.509
  - 11.51
  - 11.53
  - 11.56
  - 11.6
  - 11.63
  - 11.7
  - 11.73
  - 11.8
  - 11.83
  - 11.85
  - 11.9
  - 11.908
  - 11.91
  - 11.93
  - 11.95
- 12～12.96
  - 12
  - 12.0 or more, less than 12.5
  - 12.01
  - 12.02
  - 12.03
  - 12.04
  - 12.05
  - 12.06
  - 12.07
  - 12.08
  - 12.09
  - 12.1
  - 12.2
  - 12.3
  - 12.304
  - 12.4
  - 12.5
  - 12.5 or more, less than 13.0
  - 12.6
  - 12.7
  - 12.75
  - 12.8
  - 12.9
  - 12.96
- 13～13.9
  - 13
  - 13.096
  - 13.1
  - 13.2
  - 13.25
  - 13.3
  - 13.4
  - 13.43
  - 13.49
  - 13.5
  - 13.55
  - 13.6
  - 13.7
  - 13.8
  - 13.89
  - 13.891
  - 13.9
- 14～14.96
  - 14
  - 14.1
  - 14.2
  - 14.288
  - 14.29
  - 14.3
  - 14.4
  - 14.5
  - 14.6
  - 14.684
  - 14.7
  - 14.8
  - 14.9
  - 14.96
- 15～15.9
  - 15
  - 15.083
  - 15.1
  - 15.2
  - 15.25
  - 15.3
  - 15.4
  - 15.479
  - 15.5
  - 15.55
  - 15.6
  - 15.7
  - 15.8
  - 15.87
  - 15.875
  - 15.9
- 16～16.9
  - 16
  - 16.1
  - 16.2
  - 16.271
  - 16.3
  - 16.4
  - 16.5
  - 16.6
  - 16.67
  - 16.7
  - 16.8
  - 16.9
- 17～17.9
  - 17
  - 17.1
  - 17.2
  - 17.3
  - 17.4
  - 17.46
  - 17.463
  - 17.5
  - 17.55
  - 17.6
  - 17.7
  - 17.8
  - 17.9
- 18～18.9
  - 18
  - 18.1
  - 18.2
  - 18.258
  - 18.3
  - 18.4
  - 18.5
  - 18.6
  - 18.654
  - 18.7
  - 18.8
  - 18.9
- 19～19.9
  - 19
  - 19.05
  - 19.1
  - 19.2
  - 19.3
  - 19.4
  - 19.5
  - 19.55
  - 19.6
  - 19.7
  - 19.8
  - 19.9
- 20～20.5
  - 20
  - 20.5
- 21～21.5
  - 21
  - 21.5
- 22～22.5
  - 22
  - 22.22
  - 22.5
- 23～23.5
  - 23
  - 23.5
- 24～24.5/24.7
  - 24
  - 24.5
  - 24.5/24.7
- 25～25.5
  - 25
  - 25.5
- 26～26.5/26.7
  - 26
  - 26.5
  - 26.5/26.7
- 27～27.5
  - 27
  - 27.5
- 28～28.5
  - 28
  - 28.5
- 29～29.5
  - 29
  - 29.5
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 44
Drawing

Clear

Overall Length L(mm)
11

13

16

20

21

22

23

24

25

26

28

30

32

34

35

36

38

40

42

42.5

43

44

45

46

47

48

48.5

49

50

51

52

53

54

55

56

57

58

59

60

61

62

63

64

65

66

67

68

69

70

71

72

73

74

75

76

77

78

79

80

81

82

83

84

85

86

87

88

89

90

91

92

93

94

95

96

97

98

100

101

102

103

104

104.2

105

106

107

108

109

110

111

112

113

114

115

116

117

118

118.1

119

120

121

122

123

124

125

126

127

128

130

131

133

134

135

136

137

138

139

140

141

142

143

144

145

146

147

148

149

150

151

152

153

154

155

156

157

158

159

160

161

162

163

165

166

167

168

169

170

171

172

174

175

176

177

178

179

180

182

183

184

185

186

188

190

191

192

193

194

195

196

197

198

199

200

201

202

203

204

205

206

208

209

210

211

212

215

216

217

218

220

221

222

223

224

225

227

228

229

230

232

233

234

235

237

238

240

241

242

244

245

246

247

248

249

250

255

257

258

260

263

265

267

268

269

270

271

272

274

275

276

278

280

281

285

289.7

290

294

295

297

298

300

302

303

305

310

314

315

320

321

322

323

330

339

340

342

350

359

363

367

370

371

383

386

390

400

420

430

450

480

485

500

510

560

600

740

910

1080
Drawing

Clear

Groove Length L(mm)
- 0～0.9
  - 0
  - 0.015
  - 0.025
  - 0.04
  - 0.05
  - 0.06
  - 0.075
  - 0.08
  - 0.09
  - 0.1
  - 0.12
  - 0.14
  - 0.15
  - 0.16
  - 0.18
  - 0.2
  - 0.22
  - 0.24
  - 0.25
  - 0.3
  - 0.33
  - 0.4
  - 0.44
  - 0.48
  - 0.5
  - 0.55
  - 0.6
  - 0.7
  - 0.8
  - 0.88
  - 0.9
- 1～1.98
  - 1
  - 1.1
  - 1.2
  - 1.3
  - 1.4
  - 1.5
  - 1.6
  - 1.65
  - 1.7
  - 1.8
  - 1.9
  - 1.98
- 2～2.97
  - 2
  - 2.1
  - 2.2
  - 2.3
  - 2.31
  - 2.4
  - 2.5
  - 2.6
  - 2.64
  - 2.7
  - 2.8
  - 2.9
  - 2.97
- 3～3.9
  - 3
  - 3.2
  - 3.3
  - 3.4
  - 3.5
  - 3.6
  - 3.7
  - 3.8
  - 3.9
- 4～4.9
  - 4
  - 4.1
  - 4.2
  - 4.3
  - 4.4
  - 4.5
  - 4.6
  - 4.7
  - 4.8
  - 4.9
- 5～5.8
  - 5
  - 5.1
  - 5.2
  - 5.3
  - 5.4
  - 5.5
  - 5.6
  - 5.7
  - 5.8
- 6～6.8
  - 6
  - 6.2
  - 6.3
  - 6.4
  - 6.5
  - 6.6
  - 6.8
- 7～7.8
  - 7
  - 7.2
  - 7.3
  - 7.4
  - 7.5
  - 7.6
  - 7.8
- 8～8.8
  - 8
  - 8.2
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.8
- 9～9.8
  - 9
  - 9.2
  - 9.3
  - 9.4
  - 9.5
  - 9.6
  - 9.8
- 10～10.8
  - 10
  - 10..1
  - 10.2
  - 10.4
  - 10.5
  - 10.6
  - 10.8
- 11～11.8
  - 11
  - 11.1
  - 11.2
  - 11.3
  - 11.4
  - 11.6
  - 11.7
  - 11.8
- 12～12.8
  - 12
  - 12.2
  - 12.3
  - 12.5
  - 12.6
  - 12.8
- 13～13.8
  - 13
  - 13.1
  - 13.2
  - 13.5
  - 13.8
- 14～14.9
  - 14
  - 14.3
  - 14.4
  - 14.5
  - 14.8
  - 14.9
- 15～15.8
  - 15
  - 15.3
  - 15.6
  - 15.8
- 16～16.8
  - 16
  - 16.1
  - 16.2
  - 16.5
  - 16.7
  - 16.8
- 17～17.8
  - 17
  - 17.1
  - 17.2
  - 17.3
  - 17.4
  - 17.6
  - 17.8
- 18～18.9
  - 18
  - 18.5
  - 18.6
  - 18.8
  - 18.9
- 19～19.8
  - 19
  - 19.2
  - 19.4
  - 19.5
  - 19.7
  - 19.8
- 20～20.7
  - 20
  - 20.3
  - 20.4
  - 20.7
- 21～21.8
  - 21
  - 21.2
  - 21.4
  - 21.6
  - 21.8
- 22～22.8
  - 22
  - 22.1
  - 22.2
  - 22.5
  - 22.8
- 23～23.9
  - 23
  - 23.3
  - 23.4
  - 23.9
- 24～24.8
  - 24
  - 24.3
  - 24.5
  - 24.6
  - 24.8
- 25～25.8
  - 25
  - 25.2
  - 25.5
  - 25.7
  - 25.8
- 26～26.6
  - 26
  - 26.1
  - 26.3
  - 26.4
  - 26.6
- 27～27.8
  - 27
  - 27.6
  - 27.8
- 28～28.8
  - 28
  - 28.1
  - 28.2
  - 28.5
  - 28.8
- 29～29.4
  - 29
  - 29.3
  - 29.4
- 30～30.8
  - 30
  - 30.6
  - 30.8
- 31～31.7
  - 31
  - 31.2
  - 31.5
  - 31.7
- 32～32.8
  - 32
  - 32.3
  - 32.4
  - 32.8
- 33～33.8
  - 33
  - 33.6
  - 33.8
- 34～34.8
  - 34
  - 34.1
  - 34.5
  - 34.8
- 35～35.5
  - 35
  - 35.3
  - 35.5
- 36～36.8
  - 36
  - 36.5
  - 36.8
- 37～37.5
  - 37
  - 37.5
- 38～38.3
  - 38
  - 38.3
- 39～39.8
  - 39
  - 39.8
- 40～40.5
  - 40
  - 40.5
- 41～41.3
  - 41
  - 41.3
- 42～42.8
  - 42
  - 42.8
- 43～43.5
  - 43
  - 43.2
  - 43.5
- 44～44.3
  - 44
  - 44.3
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53～53.4
  - 53
  - 53.4
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 61
- 62
- 63
- 64
- 65
- 66
- 67
- 68
- 69
- 70
- 71
- 72
- 73
- 74
- 75
- 76
- 77
- 78
- 79
- 80
- 81
- 82
- 83
- 84
- 85
- 86
- 87
- 88
- 89
- 90
- 91
- 92
- 93
- 94
- 95
- 96
- 97
- 98
- 99
- 100
- 101
- 102
- 103
- 104
- 105
- 106
- 107
- 108
- 109
- 110
- 111
- 112
- 113
- 114
- 115
- 116
- 117
- 118
- 119
- 120
- 121
- 122
- 123
- 124
- 125
- 126
- 127
- 128
- 130
- 131
- 132
- 133
- 135
- 136
- 137
- 138
- 140
- 143
- 144
- 145
- 146
- 148
- 149
- 150
- 152
- 153
- 154
- 155
- 156
- 159
- 160
- 161
- 162
- 163
- 164
- 165
- 167
- 168
- 169
- 170
- 171
- 173
- 175
- 176
- 177
- 180
- 181
- 182
- 183
- 184
- 185
- 188
- 189
- 190
- 195
- 196
- 197
- 198
- 200
- 205
- 207
- 208
- 210
- 212
- 214
- 215
- 216
- 218
- 219
- 220
- 223
- 224
- 227
- 230
- 231
- 232
- 234
- 240
- 242
- 248
- 250
- 252
- 253
- 258
- 260
- 263
- 264
- 265
- 270
- 272
- 274
- 277
- 280
- 282
- 290
- 292
- 295
- 300
- 302
- 310
- 315
- 318
- 322
- 323
- 327
- 330
- 337
- 340
- 343
- 350
- 360
- 372
- 385
- 400
- 402
- 432
- 440
- 460
- 512
- 550
- 692
- 860
- 1030
Drawing

Clear

work material
- general steel
- Quenched and tempered steel
- high hardness steel
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
- Machinable Ceramics
Details

Clear

Shank Type
- End Mill Shank
- straight shank
- Taper shank
Images

Clear

Tool Material Type
- High-speed steel
- Carbide
- PCD
Details

Clear

With/without Oil Hole
- Available
- NA
Clear

Coating Y/N
- Available
- NA
Clear

Coating Type
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- TiCN
- TiN
- DLC
- Dia Coat
- Non-Coated
- Other
Details

Clear

Narrow search by specifying Manufacturer

- MISUMI (17)
- Economy series (0)
- NACHI(FUJIKOSHI) (27)
- GUHRING (20)
- ATOM (17)
- OSG (16)
- NS TOOL (10)
- DIJET (8)
- SUMITOMO ELECTRIC HARDMETAL (5)
- OKAZAKI SEIKO (4)
- WIDIN (4)
- 7 LEADERS (3)
- MITSUBISHI HITACHI TOOL (3)
- IWATA TOOL (3)
- UNION TOOL (3)
- BOTEK (1)
- KYOWA SEIKO (1)
- MITSUBISHI MATERIALS (1)
- OMIKOGYO (1)
- WIDIA (1)
- ISCAR (0)
- RYOCO SEIKI (0)
- TUNGALOY (0)
- ASAHI TOOLS (0)
- ISHIHASHI (0)
- EIKOSHA (0)
- DIXI (0)
- FUKUDA (0)
- SANDVIK (0)
- MAPAL (0)
- TOYO DRILL (0)
Clear

CAD

- 2D
- 3D
Clear

Related Categories to Straight Shank / End Mill Shank Drills (Carbide)

Top of the page

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

Credit Card Kartu Kredit
Bank TransferTransfer Bank

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Tel:021-8984-0008
Fax:021-8984-0007

Inquiry Permintaan

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

Straight Shank / End Mill Shank Drills (Carbide)（work material：Stainless Steel）

Configure

Specification/Dimensions

Hole diameter (drill diameter) D(mm)

Overall Length L(mm)

Groove Length L(mm)

work material

Shank Type

Tool Material Type

With/without Oil Hole

Coating Y/N

Coating Type

Narrow search by specifying Manufacturer

CAD

Related Categories to Straight Shank / End Mill Shank Drills (Carbide)

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

Straight Shank / End Mill Shank Drills (Carbide)（work material：Stainless Steel）

Configure

Specification/Dimensions

Hole diameter (drill diameter) D(mm)

Overall Length L(mm)

Groove Length L(mm)

work material

Shank Type

Tool Material Type

With/without Oil Hole

Coating Y/N

Coating Type

Narrow search by specifying Manufacturer

CAD

Related Categories to Straight Shank / End Mill Shank Drills (Carbide)

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) *Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) *Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan
Kategori / Merek

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB