(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

9.5 Million Products, 1,600 Brands, Free Shipping,
63,000 Stock items for Same Day Shipping

9.5 Juta Produk, 1,600 Merek, Gratis Pengiriman,
63,000 Item Stok untuk Pengiriman di Hari yang Sama

021-8984-0008

8:30 - 17:30 (Mon-Fri), 8:30 - 15:00 (Sat)

8:30 - 17:30 (Sen-Jum), 8:30 - 15:00 (Sab)

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.

Search by Brand Pencarian dengan Merek

Brand List Daftar Merek

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

This translation is a Google translation Terjemahan ini adalah terjemahan Google

Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.

Pemberitahuan Jadwal Pemeliharaan : Situs ini akan tidak tersedia dikarenaka jadwal pemeliharaan mulai dari 8:00 21/4/2024 sampai dengan 5:00 pada tanggal 22/4/2024. Kami mohon maaf atas ketidaknyamanan yang terjadi.
Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 21/4/2024 to 5:00 (WIB) 22/4/2024. We apologize for the inconvenience.
Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

CommentsSaran

Name (Optional)Nama (tidak wajib)

E-mail Address (Optional)E-mail (tidak wajib)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Kebijakan Privacy

Thank you for your cooperation.Terima kasih atas kerjasama anda.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy Walaupun Kami tidak dapat langsung menjawab saran yang ditulis di lembar ini, informasinya akan kami review untuk peningkatan pelayanan dikemudian hari
Silahkan pergunakan Forms Permintaan.
Kebijakan Privacy

HSS Drills（work material：Quenched and tempered steel）

An online store for high speed steel drills. Divided into categories of straight shank, end mill shank, taper shank, step drill, and drill set. In MISUMI's e-catalog, specifications/dimensions of brand, hole diameter, groove length, total length, compatible work materials, tool material type, etc. can be selected with one click, so you can easily find the desired high speed steel end mill.
[What is a high speed steel drill?]
A type of milling cutter. A drill that uses high speed steel (abbreviated as HSS). High speed steel is made by adding large amounts of metal ingredients such as chromium, tungsten, molybdenum, or vanadium to steel for the purpose of enhancing the hardness and softening resistance under high temperature. After applying heat treatment such as quenching, it is formed by polishing for use. Compared to cemented carbide, it has lesser abrasion resistance, but it is high in toughness.

Search by specifying the lower class category

74 items

: 30; 45; 60

Days to Ship	All Same day 1 Day(s) or Less 2 Day(s) or Less 8 Day(s) or Less 9 Day(s) or Less 10 Day(s) or Less 11 Day(s) or Less 12 Day(s) or Less 13 Day(s) or Less 14 Day(s) or Less

Cobalt Straight Shank Drill COSD

NACHI(FUJIKOSHI)

A general-purpose cobalt drill that can handle anything from steel to stainless steel.
[Features]
· Consistent drill bite due to the X-type thinning.
· Sharpness is increased by reinforcing the drill torsion angle.
· White surface less than 2.0 mm in diameter (not colored).
[Applications]
· Can be used for a wide range of materials, from steel to stainless steel.

Days to Ship: Same day or more
SG-ESS Drill SGESS

NACHI(FUJIKOSHI)

High-grade powdered high-speed steel and SG coating allows this HSS drill to have the longest life possible.
[Features]
· Optimized cutting edge, groove shape and high precision achieve stable processing and high hole positioning accuracy.
· Achieves high-efficiency machining based on high speed and high feed.
[Applications]
· Capable of high speed, high efficiency machining of materials ranging from steel to stainless steel and aluminum, enabling high precision drilling.

Days to Ship: 9 Day(s) or more
Cobalt Tapered Shank Drill COTD

NACHI(FUJIKOSHI)

A general-purpose cobalt drill that can handle anything from steel to stainless steel and aluminum.
[Features]
· Cobalt HSS with excellent wear resistance and heat resistance is used for the main body.

Days to Ship: 11 Day(s) or more
Tapered Shank Long Drill LTD

NACHI(FUJIKOSHI)

A general purpose long drill bit used over the widest range of applications.
[Features]
· The optimal drill bit for machining can be selected, supporting a diverse range of drill depths and an abundant range of sizes (groove length, overall length).
[Applications]
· Enables selection of a drill bit suitable for the drilling depth for machining.

Days to Ship: 16 Day(s) or more
High-Speed Steel Drill, Straight Shank / Regular【1-10 Pieces Per Package】

MISUMI

[Features]
·Lineup of frequently used sizes in packs
·Straight shank type with general-purpose high-speed steel TiN-coated

Volume Discount
Days to Ship: 10 Day(s) or more
G Short Tapered Shank Drill GTS

NACHI(FUJIKOSHI)

Taper type straight shank drill with a TiN coated surface.
[Features]
· The original thinning shape (3-rake) improves centripedality and chip separation.
· TiN coating achieves longer life.
[Applications]
· Capable of high efficiency machining of materials ranging from steel to stainless steel and aluminum. High positional accuracy can be obtained.

Days to Ship: 12 Day(s) or more
G Standard Drill GSD

NACHI(FUJIKOSHI)

Straight shank type coating drill for general purpose.
[Features]
· The surface is coated with a hard TiN film to achieve a long service life.
[Applications]
· Supports materials from steel to stainless steel and aluminum.

Days to Ship: 16 Day(s) or more
AG Long Power Drill AGPLSD

NACHI(FUJIKOSHI)

A drill that can steplessly drill deep holes up to L/D20.
[Features]
· Adopts AG coating with excellent wear resistance to realize a longer life.
· Chip-flow is improved while maintaining rigidity thanks to its non-stepped slot shape.
[Applications]
· Ideal for deep hole machining for anything from raw materials to mold steel.

Days to Ship: Same day or more
EX-GOLD Drills Long_EX-GDXL

OSG

High-rigidity parabolic groove enables deep drilling of up to 7 to 10 times the diameter

Days to Ship: 2 Day(s) or more
TiN Coated High-Speed Steel Drill for Difficult-to-Cut Materials, Straight Shank / Regular【1-10 Pieces Per Package】

MISUMI

[Features]
·Demonstrates one of the best cutting performance for general steel, stainless steel, titanium, inconel, heat-resistant alloys, and other difficult-to-cut materials
·High helix shape promotes cutting chip discharge
·X-shaped thinning provides good chamfer and greatly reduces thrust load

Volume Discount
Days to Ship: 16 Day(s) or more
EX-GOLD Drills Regular_EX-GDR

OSG

[Features]With an overall length of 59 mm to 235 mm, it is a highly versatile drill capable of non-step, high-speed machining up to 4 to 5 times the diameter.

Days to Ship: 2 Day(s) or more
High-Speed Steel Drill, Straight Shank / Regular【5-10 Pieces Per Package】

MISUMI

[Features]
·Lineup of frequently used sizes
·Straight shank type with general-purpose high-speed steel steam oxide treatment

Volume Discount
Days to Ship: 16 Day(s) or more
TiN Coated High-Speed Steel Drill, Straight Shank / Regular【1-10 Pieces Per Package】

MISUMI

With a wide range of response capabilities for everything from general steel to difficult-to-cut materials, it is capable of deep drilling with a high degree of difficulty

Volume Discount
Days to Ship: 10 Day(s) or more
High-Speed Steel Drill, Straight Shank / Long

MISUMI

[Features]
·Lineup of frequently used sizes
·Straight shank long drill type that can handle deep hole drilling

Volume Discount
Days to Ship: 12 Day(s) or more
AG-ES drill AGES

NACHI(FUJIKOSHI)

Coated high-speed drill that realizes high speeds and high feed rates approaching that of carbide drills.
[Features]
· New AG coating with excellent heat resistance and abrasion resistance is the best match for next generation high alloy high-speed steel.
· 50C type capable of high-speed machining at a cutting speed of 60 m/min.
· Capable of high speed, high efficiency machining of materials ranging from steel to stainless steel and aluminum.
· The next generation of high alloy steel HSS achieves both anti-chipping performance and friction resistance performance.
[Applications]
· Also convenient for lathes where stable machining of carbide is difficult and low-rigidity processing machines.

Days to Ship: 9 Day(s) or more
SG-ES Drill SGES

NACHI(FUJIKOSHI)

HSS drill of the highest quality featuring a long service life, with high-grade powder HSS and SG coating.
[Features]
· High-grade powdered high-speed steel and SG coating allows the HSS drill to have the longest life possible.
· Optimized cutting edge, groove shape and high precision achieve stable processing and high hole positioning accuracy.
· Achieves high-efficiency machining based on high speed and high feed.
· Allows high-speed, high-efficiency machining up to mold steel and aluminum.
* Cannot be used for austenitic stainless steel.
[Applications]
· Capable of high speed, high efficiency machining of materials ranging from steel to stainless steel and aluminum, enabling high precision drilling.

Days to Ship: 10 Day(s) or more
EX-GOLD Drills Stub_EX-GDS

OSG

Thanks to its high-rigidity groove form and stub groove length, it provides high efficiency and high precision and is ideal for pilot hole tapping and lathe processing.

Days to Ship: 2 Day(s) or more
G Tapered Shank Long Drill GLTD

NACHI(FUJIKOSHI)

[Features]
· It is a coating long drill suitable for steel, stainless steel, and aluminum.

Days to Ship: 10 Day(s) or more
TiN Coated High-Speed Steel Drill, End Mill Shank / Regular

MISUMI

[Features]
・Highly versatile drill that can handle everything from general steel to non-ferrous metals, cast iron, and stainless steel
・Improved thinning and helix angle reduce torque and achieve high precision machining
・Special groove shape allows hard and long chips to be ejected without clogging

Volume Discount
Days to Ship: Same day or more
G Oil Hole Drill GOH

NACHI(FUJIKOSHI)

General purpose coated oil hole drill.
[Features]
· The original thinning shape (3-rake) improves centripedality and chip separation.
· TiN coating and internal lubrication provide a cooling effect that results in a long D lifetime.
[Applications]
· Capable of high efficiency machining of materials ranging from steel to stainless steel and aluminum.

Days to Ship: 9 Day(s) or more
EX-GOLD Drills Regular with Internal Coolant Supply_EX-HO-GDR

OSG

Thanks to the oil hole, high-efficiency processing and long service life are achieved, making it effective for difficult-to-machine materials such as stainless steel

Days to Ship: 2 Day(s) or more
VP-GOLD Drills Regular with Internal Coolant Supply_VP-HO-GDR

OSG

Powdered high-speed steel + V coating with an oil hole allow high speed machining that can exceed the power of carbide drills

Days to Ship: 16 Day(s) or more
Straight Shank Drill Regular GT100 658

GUHRING

The go-to part for drilling deep holes. A coated drill for high-efficiency machining.

Days to Ship: 8 Day(s) or more
Straight Shank Drill, Regular Type N 305

GUHRING

Cobalt high-speed steel drill for general drilling applications.

Days to Ship: 8 Day(s) or more
GSDSET10 G Coating Drill, Set of 10【10 Pieces Per Package】

NACHI(FUJIKOSHI)

General purpose coated drill.
[Features]
· The surface is coated with a hard TiN film to achieve a long service life.
· A set of 10 pieces with diameters ranging from 2.0 to 6.0 mm.
[Applications]
· Can be used for a wide range of materials, from steel to stainless steel and aluminum.

Days to Ship: 16 Day(s) or more
SG Flat Drill SGEZ

NACHI(FUJIKOSHI)

[Features]
· Multifunctional large diameter flat drill used for counterboring on inclined surfaces, tap blind holes, etc.

Days to Ship: 12 Day(s) or more
AG Power Drill AGPSD

NACHI(FUJIKOSHI)

[Features]
· Capable of high-efficiency machining on steel and cast iron.
· Allows non-step boring up to hole depth 5D.
· Cannot be used for austenitic stainless steel.

Days to Ship: 8 Day(s) or more
TiAlN Coated Powdered High-Speed Steel Drill, End Mill Shank / Regular Model

MISUMI

Sophisticated deep hole drilling that's made possible by well-balanced models that are aimed for the highest standards in high-speed steel

Volume Discount
Days to Ship: 16 Day(s) or more
TiN Coated High-Speed Steel Drill, End Mill Shank / Stub

MISUMI

[Features]
・Highly versatile drill that can handle everything from general steel to non-ferrous metals, cast iron, and stainless steel
・Improved thinning and helix angle reduce torque and achieve high precision machining
・Special groove shape allows hard and long chips to be ejected without clogging

Volume Discount
Days to Ship: 16 Day(s) or more
TiN Coated High-Speed Steel Drill for Machining Difficult-to-Cut Materials, Straight Shank / Long

MISUMI

[Features]
·Demonstrates one of the best cutting performance for general steel, stainless steel, titanium, inconel, heat-resistant alloys, and other difficult-to-cut materials
·High helix shape promotes cutting chip discharge

Volume Discount
Days to Ship: 16 Day(s) or more
TiN Coated High-Speed Steel Drill, Straight Shank / Regular【5-10 Pieces Per Package】

MISUMI

Carefully selected frequently used 48 sizes are assorted at low prices

Volume Discount
Days to Ship: 16 Day(s) or more
TiN Coated High-Speed Steel Drill, Tapered Shank / Regular

MISUMI

A powerful tapered shank drill with TiN coating that has further improved the durability

Volume Discount
Days to Ship: 16 Day(s) or more
AG Starting Drill AGSTD

NACHI(FUJIKOSHI)

HSS drill which is capable of speedy centering, chamfering and V-grooving and boasts a long service life.
[Features]
· Highly accurate positioning is possible with good bite.
· The sharp blade produces a beautifully finished surface.
[Applications]
· Can be used for various processing, from chamfering to V groove machining.

Days to Ship: 9 Day(s) or more
AG-ESS drill AGESS

NACHI(FUJIKOSHI)

Coated high-speed drill that realizes high speeds and high feed rates approaching that of carbide drills.
[Features]
· New AG coating with excellent heat resistance and abrasion resistance is the best match for next generation high alloy high-speed steel.
· 50C type capable of high-speed machining at a cutting speed of 60 m/min.
· The next generation of high alloy steel HSS achieves both anti-chipping performance and friction resistance performance.
· Capable of high speed, high efficiency machining of materials ranging from steel to stainless steel and aluminum.
[Applications]
· Convenient for lathes where stable machining of carbide is difficult and low-rigidity processing machines.

Days to Ship: 15 Day(s) or more
AG Starting Drill Long Shank AGSTDLS

NACHI(FUJIKOSHI)

Long shank type starting HSS drill for deep locations or avoiding interference.
[Features]
· Capable of speedy centering, chamfering and V-grooving and boasts a long service life.
· Highly accurate positioning is possible with good bite.
· The sharp blade produces a beautifully finished surface.
[Applications]
· Can be used with outstanding positioning accuracy for various processing, from chamfering to V groove machining.

Days to Ship: 12 Day(s) or more
G Short Drill GSS

NACHI(FUJIKOSHI)

Short type straight shank drill with a TiN coated surface.
[Features]
· The original thinning shape (3-rake) improves centripedality and chip separation.
· TiN coating achieves longer life.
[Applications]
· Capable of high efficiency machining of materials ranging from steel to stainless steel and aluminum. High positional accuracy can be obtained.

Days to Ship: 12 Day(s) or more
G Standard Tapered Shank Drill GTD

NACHI(FUJIKOSHI)

Taper shank type coating drill for general purpose.
[Features]
· The surface is coated with a hard TiN film to achieve a long service life.
[Applications]
· Supports materials from steel to stainless steel and aluminum.

Days to Ship: 9 Day(s) or more
SG-FAX Oil Hole Drill SGOH

NACHI(FUJIKOSHI)

Oil hole HSS drill of the highest quality featuring a long service life, with high-grade powder HSS and SG coating.
[Features]
· Optimized cutting edge, groove shape and high precision achieve stable processing and high hole positioning accuracy.
· Achieves high-efficiency machining based on high speed and high feed.
[Applications]
· Capable of high speed, high efficiency machining of materials ranging from steel to stainless steel and aluminum.

Days to Ship: 9 Day(s) or more
G Long Drill GLSD

NACHI(FUJIKOSHI)

Coated drill for deep holes.
[Features]
· It discharges chips well, making it ideal for drilling deep holes and deep positions.
· Chip-flow is improved while maintaining rigidity thanks to its non-stepped slot shape.
· TiN coating adopted to achieve a longer life even for deep holes.
[Applications]
· It discharges cutting chips well even for deep holes, enabling high-efficiency machining.

Days to Ship: 16 Day(s) or more
EX-GOLD Drills Regular with Morse Taper Shank_EX-MT-GDR

OSG

Morse taper shank type suitable for lathes, drill presses, multi-axis dedicated machines, etc.

Days to Ship: 2 Day(s) or more
EX-GOLD Drills Medium_EX-GDN

OSG

The groove length is between the stubby and regular sizes and achieves non-step high speed machining up to 4 times the diameter, even for small diameters

Days to Ship: 2 Day(s) or more
EX-GOLD Drills Stub with Long Shank for General Application_EX-LS-GDS

OSG

Suitable for machining parts adjacent to horizontal machinery, walls, and jigs, where good reach is required.

Days to Ship: 16 Day(s) or more
VP-GOLD Drills Regular_VP-GDR

OSG

Super Premium High + V coating enables high-speed machining similar to the carbide drill

Days to Ship: 2 Day(s) or more
VP-GOLD Drills Short with Internal Coolant Supply_VP-HO-GDS

OSG

Powdered high-speed steel + V coating with an oil hole allow high speed machining that can exceed the power of carbide drills

Days to Ship: 16 Day(s) or more
GOLD Drills V coated Medium with Morse Taper Shank_V-MT-GDN

OSG

V-coated tapered shank and medium type drill with special attention given to reducing thrust and improving usability with lathes

Days to Ship: 16 Day(s) or more

Days to Ship:	Same day or more

Days to Ship:	9 Day(s) or more

Days to Ship:	11 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	Same day or more

Days to Ship:	2 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	2 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	9 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	2 Day(s) or more

Days to Ship:	10 Day(s) or more

Days to Ship:	Same day or more

Days to Ship:	9 Day(s) or more

Days to Ship:	2 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	8 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	9 Day(s) or more

Days to Ship:	15 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	12 Day(s) or more

Days to Ship:	9 Day(s) or more

Days to Ship:	9 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	2 Day(s) or more

Days to Ship:	2 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	2 Day(s) or more

Days to Ship:	16 Day(s) or more

Days to Ship:	16 Day(s) or more


Brand
Product Series
Days to Ship
Hole diameter (drill diameter) D(mm)
Overall Length L(mm)
Groove Length L(mm)
work material
Shank Type
Tool Material Type
With/without Oil Hole
Coating Y/N
Coating Type


Brand	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	MISUMI	OSG	MISUMI	MISUMI	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	NACHI(FUJIKOSHI)	MISUMI	NACHI(FUJIKOSHI)	OSG	OSG	GUHRING	GUHRING	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	OSG	OSG	OSG	OSG	OSG
Product Series	Cobalt Straight Shank Drill COSD	SG-ESS Drill SGESS	Cobalt Tapered Shank Drill COTD	Tapered Shank Long Drill LTD	High-Speed Steel Drill, Straight Shank / Regular【1-10 Pieces Per Package】	G Short Tapered Shank Drill GTS	G Standard Drill GSD	AG Long Power Drill AGPLSD	EX-GOLD Drills Long_EX-GDXL	TiN Coated High-Speed Steel Drill for Difficult-to-Cut Materials, Straight Shank / Regular【1-10 Pieces Per Package】	EX-GOLD Drills Regular_EX-GDR	High-Speed Steel Drill, Straight Shank / Regular【5-10 Pieces Per Package】	TiN Coated High-Speed Steel Drill, Straight Shank / Regular【1-10 Pieces Per Package】	High-Speed Steel Drill, Straight Shank / Long	AG-ES drill AGES	SG-ES Drill SGES	EX-GOLD Drills Stub_EX-GDS	G Tapered Shank Long Drill GLTD	TiN Coated High-Speed Steel Drill, End Mill Shank / Regular	G Oil Hole Drill GOH	EX-GOLD Drills Regular with Internal Coolant Supply_EX-HO-GDR	VP-GOLD Drills Regular with Internal Coolant Supply_VP-HO-GDR	Straight Shank Drill Regular GT100 658	Straight Shank Drill, Regular Type N 305	GSDSET10 G Coating Drill, Set of 10【10 Pieces Per Package】	SG Flat Drill SGEZ	AG Power Drill AGPSD	TiAlN Coated Powdered High-Speed Steel Drill, End Mill Shank / Regular Model	TiN Coated High-Speed Steel Drill, End Mill Shank / Stub	TiN Coated High-Speed Steel Drill for Machining Difficult-to-Cut Materials, Straight Shank / Long	TiN Coated High-Speed Steel Drill, Straight Shank / Regular【5-10 Pieces Per Package】	TiN Coated High-Speed Steel Drill, Tapered Shank / Regular	AG Starting Drill AGSTD	AG-ESS drill AGESS	AG Starting Drill Long Shank AGSTDLS	G Short Drill GSS	G Standard Tapered Shank Drill GTD	SG-FAX Oil Hole Drill SGOH	G Long Drill GLSD	EX-GOLD Drills Regular with Morse Taper Shank_EX-MT-GDR	EX-GOLD Drills Medium_EX-GDN	EX-GOLD Drills Stub with Long Shank for General Application_EX-LS-GDS	VP-GOLD Drills Regular_VP-GDR	VP-GOLD Drills Short with Internal Coolant Supply_VP-HO-GDS	GOLD Drills V coated Medium with Morse Taper Shank_V-MT-GDN
Days to Ship	Same day or more	9 Day(s) or more	11 Day(s) or more	16 Day(s) or more	10 Day(s) or more	12 Day(s) or more	16 Day(s) or more	Same day or more	2 Day(s) or more	16 Day(s) or more	2 Day(s) or more	16 Day(s) or more	10 Day(s) or more	12 Day(s) or more	9 Day(s) or more	10 Day(s) or more	2 Day(s) or more	10 Day(s) or more	Same day or more	9 Day(s) or more	2 Day(s) or more	16 Day(s) or more	8 Day(s) or more	8 Day(s) or more	16 Day(s) or more	12 Day(s) or more	8 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	16 Day(s) or more	9 Day(s) or more	15 Day(s) or more	12 Day(s) or more	12 Day(s) or more	9 Day(s) or more	9 Day(s) or more	16 Day(s) or more	2 Day(s) or more	2 Day(s) or more	16 Day(s) or more	2 Day(s) or more	16 Day(s) or more	16 Day(s) or more
Hole diameter (drill diameter) D(mm)	3.4 ～ 12	0.5 ～ Over 36.5, and 38.0 or less	7 ～ 40	35	0.2 ～ 13	7 ～ 32	9.4 ～ 11.3	1 ～ 13	2 ～ 13	2 ～ 13	2.2 ～ 31	1 ～ 13	1 ～ 12.5	2 ～ 10	2 ～ 20	2 ～ 32	1.15 ～ 12.9	19.4	2 ～ 12.5	8 ～ 40	6 ～ 40	6 ～ 32	2 ～ 3.3	0.8 ～ 11.2	2 ～ 6	20 ～ 32	1 ～ 12.9	2 ～ 13	2 ～ 13	2 ～ 13	1 ～ 13	10.5 ～ 30	3 ～ 20	1 ～ 20	3 ～ 12	1.6 ～ 9.1	7 ～ 32	10 ～ 30	4.1 ～ 10.5	6 ～ 50	0.53 ～ 6	3.3 ～ 8.5	1.8 ～ 32	6 ～ Over 29.8, and 30.8 or less	6 ～ 32
Overall Length L(mm)	73 ～ 149	38 ～ 168	155 ～ 365	1,200 ～ 700	19 ～ 151	126 ～ 235	125 ～ 142	-	100 ～ 300	49 ～ 151	59 ～ 240	34 ～ 151	34 ～ 151	125 ～ 265	56 ～ 210	56 ～ 255	39 ～ 108	300	56 ～ 161	83 ～ 250	101 ～ 270	101 ～ 245	49 ～ 65	30 ～ 142	-	113 ～ 158	34 ～ 151	56 ～ 161	44 ～ 111	85 ～ 205	34 ～ 151	168 ～ 296	-	40 ～ 168	-	39 ～ 105	148 ～ 298	144 ～ 265	100 ～ 350	137 ～ 345	38 ～ 87	100 ～ 200	54 ～ 245	72 ～ 158	123 ～ 248
Groove Length L(mm)	31.5 ～ 78	3 ～ 94	75 ～ 220	1,000 ～ 800	3 ～ 101	45 ～ 114	81 ～ 94	33 ～ 235	40 ～ 200	24 ～ 101	27 ～ 160	12 ～ 101	12 ～ 101	85 ～ 185	24 ～ 140	24 ～ 185	7 ～ 51	200	24 ～ 101	33 ～ 152	57 ～ 180	57 ～ 165	24 ～ 36	10 ～ 94	-	44 ～ 68	12 ～ 101	24 ～ 101	12 ～ 51	56 ～ 134	12 ～ 101	87 ～ 175	9 ～ 40	6 ～ 94	9 ～ 30	13 ～ 54	67 ～ 177	75 ～ 174	65 ～ 200	57 ～ 200	6 ～ 43	18 ～ 37	22 ～ 165	28 ～ 78	43 ～ 128
work material	Quenched and tempered steel[○]	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[○/◎]
Shank Type	straight shank	End Mill Shank / straight shank	Taper shank	Taper shank	straight shank	-	straight shank	-	straight shank	straight shank	End Mill Shank / straight shank	straight shank	straight shank	straight shank	End Mill Shank / straight shank	End Mill Shank / straight shank	End Mill Shank	Taper shank	End Mill Shank	End Mill Shank / straight shank	End Mill Shank / straight shank	End Mill Shank / straight shank	straight shank	straight shank	-	straight shank	straight shank	End Mill Shank	End Mill Shank	straight shank	straight shank	Taper shank	-	End Mill Shank / straight shank	-	straight shank	-	End Mill Shank	straight shank	Taper shank	End Mill Shank / straight shank	straight shank	End Mill Shank / straight shank	End Mill Shank / straight shank	End Mill Shank
Tool Material Type	Cobalt HSS	High-speed steel	Cobalt HSS	High-speed steel	High-speed steel / Cobalt HSS	Cobalt HSS	High-speed steel	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	High-speed steel	Cobalt HSS	High-speed steel	High-speed steel	High-speed steel	Cobalt HSS	High-speed steel	Cobalt HSS	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Cobalt HSS	Cobalt HSS	High-speed steel	High-speed steel	Cobalt HSS	Powder high-speed steel	Cobalt HSS	Cobalt HSS	High-speed steel	High-speed steel	Cobalt HSS	High-speed steel	Cobalt HSS	Cobalt HSS	High-speed steel	High-speed steel	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Powder high-speed steel	High Vanadium HSS
With/without Oil Hole	NA	NA	-	-	NA	-	NA	-	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	NA	Available	Available	Available	NA	NA	-	NA	NA	Available / NA	NA	NA	NA	NA	-	NA	-	NA	-	Available	NA	NA	NA	NA	NA	Available	NA
Coating Y/N	NA	Available	NA	NA	Available / NA	Available	Available	Available	Available	Available	Available	NA	Available	NA	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	-	Available	-	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available
Coating Type	Non-Coated	TiCN	-	-	TiN	TiN	TiN	Other	TiN	TiN	TiN	-	TiN	-	Other	TiCN	TiN	TiN	TiN	TiN	TiN	Other	TiN	Other	TiN	TiCN	For General Steels (AlCrN, etc.)	TiAlN	TiN	TiN	TiN	TiN	-	Other	-	TiN	TiN	TiCN	TiN	TiN	TiN	TiN	Other	Other	Other

Configure

Specification/Dimensions

Hole diameter (drill diameter) D(mm)
- 0.05～0.99
  - 0.05
  - 0.06
  - 0.07
  - 0.075
  - 0.08
  - 0.09
  - 0.1
  - 0.105
  - 0.11
  - 0.115
  - 0.12
  - 0.125
  - 0.128
  - 0.13
  - 0.14
  - 0.143
  - 0.145
  - 0.147
  - 0.15
  - 0.155
  - 0.16
  - 0.17
  - 0.175
  - 0.18
  - 0.19
  - 0.195
  - 0.2
  - 0.205
  - 0.21
  - 0.215
  - 0.22
  - 0.225
  - 0.23
  - 0.235
  - 0.24
  - 0.245
  - 0.25
  - 0.255
  - 0.26
  - 0.265
  - 0.27
  - 0.275
  - 0.28
  - 0.285
  - 0.29
  - 0.295
  - 0.3
  - 0.305
  - 0.31
  - 0.315
  - 0.32
  - 0.325
  - 0.33
  - 0.335
  - 0.34
  - 0.345
  - 0.35
  - 0.355
  - 0.36
  - 0.365
  - 0.37
  - 0.375
  - 0.38
  - 0.385
  - 0.39
  - 0.4
  - 0.405
  - 0.41
  - 0.415
  - 0.42
  - 0.425
  - 0.43
  - 0.432
  - 0.435
  - 0.44
  - 0.445
  - 0.45
  - 0.46
  - 0.47
  - 0.475
  - 0.48
  - 0.485
  - 0.49
  - 0.495
  - 0.5
  - 0.505
  - 0.51
  - 0.515
  - 0.52
  - 0.525
  - 0.53
  - 0.535
  - 0.54
  - 0.545
  - 0.55
  - 0.555
  - 0.56
  - 0.57
  - 0.575
  - 0.58
  - 0.585
  - 0.59
  - 0.595
  - 0.6
  - 0.605
  - 0.61
  - 0.615
  - 0.62
  - 0.625
  - 0.63
  - 0.632
  - 0.64
  - 0.65
  - 0.655
  - 0.66
  - 0.665
  - 0.67
  - 0.675
  - 0.68
  - 0.69
  - 0.695
  - 0.7
  - 0.705
  - 0.71
  - 0.72
  - 0.725
  - 0.73
  - 0.74
  - 0.75
  - 0.76
  - 0.77
  - 0.775
  - 0.78
  - 0.79
  - 0.795
  - 0.8
  - 0.81
  - 0.82
  - 0.825
  - 0.83
  - 0.84
  - 0.845
  - 0.85
  - 0.86
  - 0.87
  - 0.88
  - 0.89
  - 0.9
  - 0.91
  - 0.92
  - 0.925
  - 0.93
  - 0.94
  - 0.95
  - 0.96
  - 0.97
  - 0.98
  - 0.99
- 1
- 1～1.99
  - 1.01
  - 1.02
  - 1.03
  - 1.04
  - 1.05
  - 1.055
  - 1.06
  - 1.07
  - 1.08
  - 1.09
  - 1.1
  - 1.11
  - 1.12
  - 1.13
  - 1.14
  - 1.15
  - 1.16
  - 1.17
  - 1.175
  - 1.18
  - 1.19
  - 1.2
  - 1.21
  - 1.22
  - 1.23
  - 1.24
  - 1.25
  - 1.26
  - 1.265
  - 1.27
  - 1.28
  - 1.29
  - 1.3
  - 1.31
  - 1.32
  - 1.325
  - 1.33
  - 1.34
  - 1.35
  - 1.36
  - 1.37
  - 1.38
  - 1.39
  - 1.4
  - 1.41
  - 1.42
  - 1.43
  - 1.44
  - 1.45
  - 1.46
  - 1.47
  - 1.48
  - 1.49
  - 1.5
  - 1.5X10D
  - 1.51
  - 1.52
  - 1.53
  - 1.54
  - 1.55
  - 1.56
  - 1.57
  - 1.58
  - 1.59
  - 1.6
  - 1.6×10D
  - 1.605
  - 1.61
  - 1.62
  - 1.63
  - 1.64
  - 1.65
  - 1.66
  - 1.67
  - 1.68
  - 1.69
  - 1.7
  - 1.71
  - 1.715
  - 1.72
  - 1.73
  - 1.74
  - 1.745
  - 1.75
  - 1.76
  - 1.77
  - 1.775
  - 1.78
  - 1.79
  - 1.8
  - 1.8×10D
  - 1.81
  - 1.82
  - 1.83
  - 1.84
  - 1.85
  - 1.86
  - 1.87
  - 1.88
  - 1.89
  - 1.9
  - 1.91
  - 1.92
  - 1.93
  - 1.94
  - 1.95
  - 1.96
  - 1.97
  - 1.98
  - 1.99
- 2～2.99
  - 2
  - 2×10D
  - 2.01
  - 2.02
  - 2.03
  - 2.04
  - 2.05
  - 2.06
  - 2.07
  - 2.08
  - 2.09
  - 2.1
  - 2.1×10D
  - 2.11
  - 2.12
  - 2.13
  - 2.14
  - 2.15
  - 2.16
  - 2.17
  - 2.18
  - 2.19
  - 2.2
  - 2.2×10D
  - 2.21
  - 2.22
  - 2.23
  - 2.24
  - 2.25
  - 2.26
  - 2.27
  - 2.28
  - 2.29
  - 2.3
  - 2.3×10D
  - 2.31
  - 2.32
  - 2.33
  - 2.34
  - 2.35
  - 2.36
  - 2.37
  - 2.38
  - 2.39
  - 2.4
  - 2.4×10D
  - 2.41
  - 2.42
  - 2.43
  - 2.44
  - 2.45
  - 2.46
  - 2.47
  - 2.48
  - 2.49
  - 2.5
  - 2.5×10D
  - 2.51
  - 2.52
  - 2.53
  - 2.54
  - 2.55
  - 2.56
  - 2.57
  - 2.58
  - 2.59
  - 2.6
  - 2.6×10D
  - 2.61
  - 2.62
  - 2.63
  - 2.64
  - 2.65
  - 2.66
  - 2.67
  - 2.68
  - 2.69
  - 2.7
  - 2.7×10D
  - 2.71
  - 2.72
  - 2.73
  - 2.74
  - 2.75
  - 2.76
  - 2.77
  - 2.78
  - 2.79
  - 2.8
  - 2.8×10D
  - 2.81
  - 2.82
  - 2.83
  - 2.84
  - 2.85
  - 2.86
  - 2.87
  - 2.88
  - 2.89
  - 2.9
  - 2.9×10D
  - 2.91
  - 2.92
  - 2.93
  - 2.94
  - 2.95
  - 2.96
  - 2.97
  - 2.98
  - 2.99
- 3～3.99
  - 3
  - 3×10D
  - 3.01
  - 3.02
  - 3.03
  - 3.04
  - 3.05
  - 3.06
  - 3.07
  - 3.08
  - 3.09
  - 3.1
  - 3.1×10D
  - 3.11
  - 3.12
  - 3.13
  - 3.14
  - 3.15
  - 3.16
  - 3.17
  - 3.18
  - 3.19
  - 3.2
  - 3.2×10D
  - 3.21
  - 3.22
  - 3.23
  - 3.24
  - 3.25
  - 3.26
  - 3.27
  - 3.28
  - 3.29
  - 3.3
  - 3.3×10D
  - 3.31
  - 3.32
  - 3.33
  - 3.34
  - 3.35
  - 3.36
  - 3.37
  - 3.38
  - 3.39
  - 3.4
  - 3.4×10D
  - 3.41
  - 3.42
  - 3.43
  - 3.44
  - 3.45
  - 3.46
  - 3.47
  - 3.48
  - 3.49
  - 3.5
  - 3.5×10D
  - 3.51
  - 3.52
  - 3.53
  - 3.54
  - 3.55
  - 3.56
  - 3.57
  - 3.58
  - 3.59
  - 3.6
  - 3.6×10D
  - 3.61
  - 3.62
  - 3.63
  - 3.64
  - 3.65
  - 3.66
  - 3.67
  - 3.68
  - 3.69
  - 3.7
  - 3.7×10D
  - 3.71
  - 3.72
  - 3.73
  - 3.74
  - 3.75
  - 3.76
  - 3.77
  - 3.78
  - 3.79
  - 3.8
  - 3.8×10D
  - 3.81
  - 3.82
  - 3.83
  - 3.84
  - 3.85
  - 3.86
  - 3.87
  - 3.88
  - 3.89
  - 3.9
  - 3.9×10D
  - 3.91
  - 3.92
  - 3.93
  - 3.94
  - 3.95
  - 3.96
  - 3.97
  - 3.98
  - 3.99
- 4～4.99
  - 4
  - 4×10D
  - 4.01
  - 4.02
  - 4.03
  - 4.04
  - 4.05
  - 4.06
  - 4.07
  - 4.08
  - 4.09
  - 4.1
  - 4.1×10D
  - 4.11
  - 4.12
  - 4.13
  - 4.14
  - 4.15
  - 4.16
  - 4.17
  - 4.18
  - 4.19
  - 4.2
  - 4.2×10D
  - 4.21
  - 4.22
  - 4.23
  - 4.24
  - 4.25
  - 4.26
  - 4.27
  - 4.28
  - 4.29
  - 4.3
  - 4.3×10D
  - 4.31
  - 4.32
  - 4.33
  - 4.34
  - 4.35
  - 4.36
  - 4.37
  - 4.38
  - 4.39
  - 4.4
  - 4.4×10D
  - 4.41
  - 4.42
  - 4.43
  - 4.44
  - 4.45
  - 4.46
  - 4.47
  - 4.48
  - 4.49
  - 4.5
  - 4.5×10D
  - 4.51
  - 4.52
  - 4.53
  - 4.54
  - 4.55
  - 4.56
  - 4.57
  - 4.58
  - 4.59
  - 4.6
  - 4.6×10D
  - 4.61
  - 4.62
  - 4.63
  - 4.64
  - 4.65
  - 4.66
  - 4.67
  - 4.68
  - 4.69
  - 4.7
  - 4.7×10D
  - 4.71
  - 4.72
  - 4.73
  - 4.74
  - 4.75
  - 4.76
  - 4.77
  - 4.78
  - 4.79
  - 4.8
  - 4.8×10D
  - 4.81
  - 4.82
  - 4.83
  - 4.84
  - 4.85
  - 4.86
  - 4.87
  - 4.88
  - 4.89
  - 4.9
  - 4.9×10D
  - 4.91
  - 4.92
  - 4.93
  - 4.94
  - 4.95
  - 4.96
  - 4.97
  - 4.98
  - 4.99
- 5～5.99
  - 5
  - 5×10D
  - 5.01
  - 5.02
  - 5.03
  - 5.04
  - 5.05
  - 5.06
  - 5.07
  - 5.08
  - 5.09
  - 5.1
  - 5.1×10D
  - 5.11
  - 5.12
  - 5.13
  - 5.14
  - 5.15
  - 5.16
  - 5.17
  - 5.18
  - 5.19
  - 5.2
  - 5.2×10D
  - 5.21
  - 5.22
  - 5.23
  - 5.24
  - 5.25
  - 5.26
  - 5.27
  - 5.28
  - 5.29
  - 5.3
  - 5.3×10D
  - 5.31
  - 5.32
  - 5.33
  - 5.34
  - 5.35
  - 5.36
  - 5.37
  - 5.38
  - 5.39
  - 5.4
  - 5.4×10D
  - 5.41
  - 5.42
  - 5.43
  - 5.44
  - 5.45
  - 5.46
  - 5.47
  - 5.48
  - 5.49
  - 5.5
  - 5.5×10D
  - 5.51
  - 5.52
  - 5.53
  - 5.54
  - 5.55
  - 5.56
  - 5.57
  - 5.58
  - 5.59
  - 5.6
  - 5.6×10D
  - 5.61
  - 5.62
  - 5.63
  - 5.64
  - 5.65
  - 5.66
  - 5.67
  - 5.68
  - 5.69
  - 5.7
  - 5.7×10D
  - 5.71
  - 5.72
  - 5.73
  - 5.74
  - 5.75
  - 5.76
  - 5.77
  - 5.78
  - 5.79
  - 5.8
  - 5.8×10D
  - 5.81
  - 5.82
  - 5.83
  - 5.84
  - 5.85
  - 5.86
  - 5.87
  - 5.88
  - 5.89
  - 5.9
  - 5.9×10D
  - 5.91
  - 5.92
  - 5.93
  - 5.94
  - 5.95
  - 5.96
  - 5.97
  - 5.98
  - 5.99
- 6～6.97
  - 6
  - 6×10D
  - 6.04
  - 6.05
  - 6.1
  - 6.1×10D
  - 6.15
  - 6.2
  - 6.2×10D
  - 6.25
  - 6.3
  - 6.3×10D
  - 6.35
  - 6.4
  - 6.4×10D
  - 6.45
  - 6.5
  - 6.5×10D
  - 6.53
  - 6.55
  - 6.6
  - 6.6×10D
  - 6.63
  - 6.65
  - 6.7
  - 6.7×10D
  - 6.75
  - 6.8
  - 6.8×10D
  - 6.85
  - 6.9
  - 6.9×10D
  - 6.95
  - 6.97
- 7～7.98
  - 7
  - 7×10D
  - 7.02
  - 7.03
  - 7.05
  - 7.1
  - 7.1×10D
  - 7.14
  - 7.15
  - 7.2
  - 7.2×10D
  - 7.25
  - 7.3
  - 7.3×10D
  - 7.34
  - 7.35
  - 7.36
  - 7.37
  - 7.38
  - 7.4
  - 7.4×10D
  - 7.45
  - 7.49
  - 7.5
  - 7.5×10D
  - 7.52
  - 7.54
  - 7.55
  - 7.6
  - 7.6×10D
  - 7.65
  - 7.67
  - 7.7
  - 7.7×10D
  - 7.75
  - 7.8
  - 7.8×10D
  - 7.85
  - 7.9
  - 7.9×10D
  - 7.94
  - 7.95
  - 7.97
  - 7.98
- 8～8.96
  - 8
  - 8×10D
  - 8.03
  - 8.05
  - 8.1
  - 8.1×10D
  - 8.15
  - 8.2
  - 8.2×10D
  - 8.25
  - 8.3
  - 8.3×10D
  - 8.33
  - 8.35
  - 8.4
  - 8.4×10D
  - 8.43
  - 8.45
  - 8.5
  - 8.5×10D
  - 8.55
  - 8.6
  - 8.6×10D
  - 8.61
  - 8.65
  - 8.7
  - 8.7×10D
  - 8.73
  - 8.75
  - 8.8
  - 8.8×10D
  - 8.84
  - 8.85
  - 8.9
  - 8.9×10D
  - 8.95
  - 8.96
- 9～9.96
  - 9
  - 9×10D
  - 9.05
  - 9.09
  - 9.1
  - 9.1×10D
  - 9.13
  - 9.15
  - 9.2
  - 9.2×10D
  - 9.24
  - 9.25
  - 9.26
  - 9.3
  - 9.3×10D
  - 9.34
  - 9.35
  - 9.36
  - 9.38
  - 9.4
  - 9.4×10D
  - 9.45
  - 9.5
  - 9.5×10D
  - 9.52
  - 9.53
  - 9.54
  - 9.55
  - 9.6
  - 9.6×10D
  - 9.65
  - 9.7
  - 9.7×10D
  - 9.75
  - 9.8
  - 9.8×10D
  - 9.85
  - 9.9
  - 9.9×10D
  - 9.92
  - 9.95
  - 9.96
- 10～10.96
  - 10
  - 10×10D
  - 10.05
  - 10.06
  - 10.08
  - 10.1
  - 10.1×10D
  - 10.15
  - 10.2
  - 10.2×10D
  - 10.25
  - 10.3
  - 10.3×10D
  - 10.32
  - 10.35
  - 10.4
  - 10.4×10D
  - 10.45
  - 10.5
  - 10.5×10D
  - 10.55
  - 10.6
  - 10.6×10D
  - 10.65
  - 10.7
  - 10.7×10D
  - 10.72
  - 10.75
  - 10.8
  - 10.8×10D
  - 10.85
  - 10.9
  - 10.9×10D
  - 10.95
  - 10.96
- 11～11.96
  - 11
  - 11×10D
  - 11.05
  - 11.1
  - 11.1×10D
  - 11.11
  - 11.15
  - 11.2
  - 11.2×10D
  - 11.22
  - 11.24
  - 11.25
  - 11.3
  - 11.3×10D
  - 11.34
  - 11.35
  - 11.36
  - 11.38
  - 11.4
  - 11.4×10D
  - 11.45
  - 11.5
  - 11.5×10D
  - 11.55
  - 11.6
  - 11.6×10D
  - 11.65
  - 11.7
  - 11.7×10D
  - 11.75
  - 11.8
  - 11.8×10D
  - 11.85
  - 11.9
  - 11.9×10D
  - 11.91
  - 11.95
  - 11.96
- 12～12.96
  - 12
  - 12×10D
  - 12.1
  - 12.2
  - 12.25
  - 12.3
  - 12.4
  - 12.5
  - 12.5 or more, less than 13.0
  - 12.6
  - 12.7
  - 12.75
  - 12.8
  - 12.9
  - 12.96
- 13～13.95
  - 13
  - 13.1
  - 13.2
  - 13.25
  - 13.3
  - 13.4
  - 13.49
  - 13.5
  - 13.6
  - 13.7
  - 13.75
  - 13.8
  - 13.89
  - 13.9
  - 13.95
- 14～14.95
  - 14
  - 14.1
  - 14.2
  - 14.25
  - 14.29
  - 14.3
  - 14.4
  - 14.5
  - 14.6
  - 14.68
  - 14.7
  - 14.75
  - 14.8
  - 14.9
  - 14.95
- 15～15.95
  - 15
  - 15.08
  - 15.1
  - 15.2
  - 15.25
  - 15.3
  - 15.4
  - 15.48
  - 15.5
  - 15.6
  - 15.7
  - 15.75
  - 15.8
  - 15.87
  - 15.9
  - 15.95
- 16～16.9
  - 16
  - 16.1
  - 16.2
  - 16.25
  - 16.27
  - 16.3
  - 16.4
  - 16.5
  - 16.6
  - 16.67
  - 16.7
  - 16.75
  - 16.8
  - 16.9
- 17～17.9
  - 17
  - 17.07
  - 17.1
  - 17.2
  - 17.25
  - 17.3
  - 17.4
  - 17.46
  - 17.5
  - 17.6
  - 17.7
  - 17.75
  - 17.8
  - 17.86
  - 17.9
- 18～18.9
  - 18
  - 18.1
  - 18.2
  - 18.25
  - 18.26
  - 18.3
  - 18.4
  - 18.5
  - 18.6
  - 18.65
  - 18.7
  - 18.75
  - 18.8
  - 18.9
- 19～19.95
  - 19
  - 19.05
  - 19.1
  - 19.2
  - 19.25
  - 19.3
  - 19.4
  - 19.45
  - 19.5
  - 19.6
  - 19.7
  - 19.75
  - 19.8
  - 19.84
  - 19.9
  - 19.95
- 20～20.9
  - 20
  - 20.1
  - 20.2
  - 20.24
  - 20.25
  - 20.3
  - 20.4
  - 20.5
  - 20.6
  - 20.64
  - 20.7
  - 20.75
  - 20.8
  - 20.9
- 21～21.9
  - 21
  - 21.03
  - 21.1
  - 21.2
  - 21.25
  - 21.3
  - 21.4
  - 21.43
  - 21.5
  - 21.6
  - 21.7
  - 21.75
  - 21.8
  - 21.83
  - 21.9
- 22～22.9
  - 22
  - 22.1
  - 22.2
  - 22.22
  - 22.25
  - 22.3
  - 22.4
  - 22.5
  - 22.6
  - 22.62
  - 22.7
  - 22.75
  - 22.8
  - 22.9
- 23～23.9
  - 23
  - 23.02
  - 23.1
  - 23.2
  - 23.25
  - 23.3
  - 23.4
  - 23.42
  - 23.5
  - 23.6
  - 23.7
  - 23.75
  - 23.8
  - 23.81
  - 23.9
- 24～24.9
  - 24
  - 24.1
  - 24.2
  - 24.21
  - 24.25
  - 24.3
  - 24.4
  - 24.5
  - 24.6
  - 24.61
  - 24.7
  - 24.75
  - 24.8
  - 24.9
- 25～25.9
  - 25
  - 25.1
  - 25.2
  - 25.25
  - 25.3
  - 25.4
  - 25.5
  - 25.6
  - 25.7
  - 25.75
  - 25.8
  - 25.9
- 26～26.99
  - 26
  - 26.1
  - 26.19
  - 26.2
  - 26.25
  - 26.3
  - 26.4
  - 26.5
  - 26.59
  - 26.6
  - 26.7
  - 26.75
  - 26.8
  - 26.9
  - 26.99
- 27～27.9
  - 27
  - 27.1
  - 27.2
  - 27.3
  - 27.4
  - 27.5
  - 27.6
  - 27.7
  - 27.75
  - 27.78
  - 27.8
  - 27.9
- 28～28.9
  - 28
  - 28.1
  - 28.2
  - 28.25
  - 28.3
  - 28.4
  - 28.5
  - 28.57
  - 28.6
  - 28.7
  - 28.8
  - 28.9
- 29～29.9
  - 29
  - 29.1
  - 29.2
  - 29.25
  - 29.3
  - 29.37
  - 29.4
  - 29.5
  - 29.6
  - 29.7
  - 29.8
  - 29.9
- 30～30.8
  - 30
  - 30.1
  - 30.2
  - 30.3
  - 30.5
  - 30.7
  - 30.8
- 31～31.8
  - 31
  - 31.2
  - 31.3
  - 31.5
  - 31.7
  - 31.75
  - 31.8
- 32
- 32～32.8
  - 32.2
  - 32.3
  - 32.5
  - 32.7
  - 32.8
- 33～33.5
  - 33
  - 33.5
- 34～34.925
  - 34
  - 34.5
  - 34.925
- 35～35.5
  - 35
  - 35.5
- 36～36.91
  - 36
  - 36.12
  - 36.5
  - 36.91
- 37～37.7
  - 37
  - 37.5
  - 37.7
- 38～38.5
  - 38
  - 38.1
  - 38.5
- 39～39.5
  - 39
  - 39.5
- 40～40.88
  - 40
  - 40.5
  - 40.8
  - 40.88
- 41～41.67
  - 41
  - 41.5
  - 41.67
- 42～42.5
  - 42
  - 42.5
- 43～43.5
  - 43
  - 43.5
- 44～44.5
  - 44
  - 44.5
- 45～45.5
  - 45
  - 45.5
- 46～46.83
  - 46
  - 46.5
  - 46.83
- 47～47.5
  - 47
  - 47.5
- 48～48.5
  - 48
  - 48.5
- 49～49.5
  - 49
  - 49.5
- 50～50.8
  - 50
  - 50.5
  - 50.8
- 51～51.5
  - 51
  - 51.5
- 52～52.5
  - 52
  - 52.5
- 53～53.5
  - 53
  - 53.40
  - 53.5
- 54～54.5
  - 54
  - 54.5
- 55～55.5
  - 55
  - 55.2
  - 55.5
- 56～56.5
  - 56
  - 56.5
- 57～57.5
  - 57
  - 57.5
- 58～58.5
  - 58
  - 58.5
- 59～59.5
  - 59
  - 59.5
- 60～60.5
  - 60
  - 60.5
- 61～61.5
  - 61
  - 61.5
- 62～62.5
  - 62
  - 62.5
- 63～63.5
  - 63
  - 63.5
- 64～64.5
  - 64
  - 64.5
- 65～65.5
  - 65
  - 65.5
- 66～66.5
  - 66
  - 66.5
- 67～67.5
  - 67
  - 67.5
- 68～68.5
  - 68
  - 68.5
- 69～69.5
  - 69
  - 69.5
- 70～70.5
  - 70
  - 70.5
- 71～71.5
  - 71
  - 71.5
- 72～72.5
  - 72
  - 72.5
- 73～73.5
  - 73
  - 73.5
- 74～74.5
  - 74
  - 74.5
- 75
- 76
- 77
- 78
- 79～79.50
  - 79
  - 79.50
- 80
- 81
- 82
- 83
- 84
- 85
- 86
- 87
- 88
- 89～89.50
  - 89
  - 89.50
- 90
- 91～91.50
  - 91
  - 91.50
- 92～92.50
  - 92
  - 92.50
- 93
- 94～94.50
  - 94
  - 94.50
- 95～95.50
  - 95
  - 95.50
- 96
- 97
- 98
- 99
- 100
- 103
- 105
- 110
- 115
- 120
Drawing

Clear

Overall Length L(mm)
1,200

1,500

19

20

22

24

25

26

27

28

30

32

34

35

36

38

39

40

41

42

43

44

45

45.5

46

47

48

48.5

49

50

51

52

53

54

55

56

57

58

59

60

61

62

63

64

65

66

67

68

69

70

71

72

73

74

75

76

77

78

79

80

81

83

84

85

86

87

88

89

90

91

92

93

94

95

96

97

98

99

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

118.1

119

120

121

122

123

124

125

126

127

128

130

131

132

133

134

135

136

137

138

139

140

142

143

144

145

146

147

148

149

150

151

152

153

154

155

156

158

159

160

161

162

163

164

165

166

167

168

169

170

171

172

173

174

175

176

177

178

179

180

181

182

183

184

185

186

188

189

190

191

192

193

194

195

196

197

198

200

201

202

204

205

206

208

209

210

211

212

214

215

216

218

219

220

222

223

224

225

226

227

228

230

232

233

235

236

237

238

240

241

242

243

244

245

247

248

250

251

252

253

255

256

257

259

260

261

263

265

269

270

275

276

280

281

282

284

285

286

289

289.7

290

291

293

295

296

298

300

301

305

306

310

315

317

319

320

323

325

327

330

334

335

339

340

343

344

345

349

350

351

354

355

359

360

364

365

369

370

374

375

380

385

390

393

397

398

400

403

405

406

408

410

412

413

416

417

418

422

423

425

426

427

428

430

432

435

436

437

440

442

445

447

450

455

459

460

465

470

475

480

485

490

495

500

510

514

520

524

525

529

530

534

540

550

552

557

562

572

582

592

600

602

612

625

700

800

1000
Drawing

Clear

Groove Length L(mm)
- 0.4～0.8
  - 0.4
  - 0.5
  - 0.8
- 1,000～1.9
  - 1,000
  - 1.1
  - 1.5
  - 1.9
- 2～2.5
  - 2
  - 2.4
  - 2.5
- 3～3.9
  - 3
  - 3.4
  - 3.5
  - 3.9
- 4～4.8
  - 4
  - 4.2
  - 4.5
  - 4.8
- 5～5.5
  - 5
  - 5.3
  - 5.5
- 6～6.8
  - 6
  - 6.8
- 7～7.6
  - 7
  - 7.5
  - 7.6
- 8～8.5
  - 8
  - 8.5
- 9～9.5
  - 9
  - 9.5
- 10～10.6
  - 10
  - 10.6
- 11～11.8
  - 11
  - 11.5
  - 11.8
- 12
- 13～13.2
  - 13
  - 13.2
- 14
- 15
- 16～16.1
  - 16
  - 16.05
  - 16.1
- 17
- 18
- 19～19.6
  - 19
  - 19.55
  - 19.6
- 20
- 21
- 22～22.1
  - 22
  - 22.05
  - 22.1
- 23
- 24～24.3
  - 24
  - 24.25
  - 24.3
- 25
- 26～26.5
  - 26
  - 26.5
- 27
- 28
- 29
- 30
- 31～31.5
  - 31
  - 31.5
- 32
- 33～33.5
  - 33
  - 33.5
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 61
- 62
- 63
- 64
- 65
- 66
- 67
- 68
- 69
- 70
- 71
- 72
- 73
- 74
- 75
- 76
- 77
- 78
- 79
- 80
- 81
- 82
- 83
- 84
- 85
- 86
- 87
- 88
- 89
- 90
- 91
- 92
- 93
- 94
- 95
- 96
- 97
- 98
- 100
- 101
- 102
- 103
- 104
- 105
- 106
- 107
- 108
- 109
- 110
- 111
- 112
- 113
- 114
- 115
- 116
- 118
- 120
- 121
- 122
- 123
- 124
- 125
- 126
- 127
- 128～128.7
  - 128
  - 128.7
- 130
- 132
- 134
- 135
- 136
- 137
- 138
- 140
- 142
- 144
- 145
- 146
- 147
- 148
- 149
- 150
- 151
- 152
- 153
- 154
- 155
- 156
- 158
- 159
- 160
- 161
- 162
- 163
- 165
- 168
- 170
- 171
- 172
- 174
- 175
- 176
- 177
- 178
- 180
- 184
- 185
- 188
- 190
- 191
- 195
- 196
- 198
- 200
- 205
- 206
- 208
- 210
- 214
- 215
- 216
- 220
- 222
- 225
- 230
- 235
- 239
- 240
- 245
- 248
- 250
- 254
- 255
- 257
- 260
- 265
- 267
- 270
- 275
- 276
- 277
- 280
- 285
- 287
- 290
- 295
- 298
- 300
- 305
- 310
- 315
- 320
- 321
- 325
- 330
- 340
- 350
- 360
- 370
- 400
- 450
- 500
- 550
- 600
- 700
- 800
Drawing

Clear

work material
- general steel
- Quenched and tempered steel
- high hardness steel
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
Details

Clear

Shank Type
- End Mill Shank
- straight shank
- Taper shank
Images

Clear

Tool Material Type
- High-speed steel
- Cobalt HSS
- Powder high-speed steel
- High Vanadium HSS
- High-grade Powdered High-Speed Steel
Details

Clear

With/without Oil Hole
- Available
- NA
Clear

Coating Y/N
- Available
- NA
Clear

Coating Type
- TiAlN
- For General Steels (AlCrN, etc.)
- TiCN
- TiN
- DLC
- Non-Coated
- Other
Details

Clear

Narrow search by specifying Manufacturer

- MISUMI (11)
- Economy series (0)
- NACHI(FUJIKOSHI) (25)
- GUHRING (19)
- OSG (12)
- THE CUT (3)
- TOYO DRILL (2)
- FUKUDA (2)
- ISHIHASHI (0)
- SAITOTWISTDRILL (0)
- HOZAN (0)
- WIDIN (0)
- BICTOOL (0)
- MITSUBISHI MATERIALS (0)
- OKAZAKI SEIKO (0)
- SUMITOMO ELECTRIC HARDMETAL (0)
- EIKOSHA (0)
- NAKANISHI (0)
- TRUSCO NAKAYAMA (0)
- ESCO (0)
Clear

CAD

- 2D
- 3D
Clear

Related Categories to HSS Drills

Top of the page

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

Credit Card Kartu Kredit
Bank TransferTransfer Bank

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Tel:021-8984-0008
Fax:021-8984-0007

Inquiry Permintaan

Search by Category / Brand Pencarian dengan
Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

HSS Drills（work material：Quenched and tempered steel）

Search by specifying the lower class category

Configure

Specification/Dimensions

Hole diameter (drill diameter) D(mm)

Overall Length L(mm)

Groove Length L(mm)

work material

Shank Type

Tool Material Type

With/without Oil Hole

Coating Y/N

Coating Type

Narrow search by specifying Manufacturer

CAD

Related Categories to HSS Drills

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan Kategori / Merek

Search by Category Pencarian dengan Kategori

Search by Brand Pencarian dengan Merek

Message from MISUMI Message from MISUMI

My Favorites My Favorites

Settings Settings

How can we improve?Bagaimana Kami bisa meningkatkan Pelayanan?

HSS Drills（work material：Quenched and tempered steel）

Search by specifying the lower class category

Configure

Specification/Dimensions

Hole diameter (drill diameter) D(mm)

Overall Length L(mm)

Groove Length L(mm)

work material

Shank Type

Tool Material Type

With/without Oil Hole

Coating Y/N

Coating Type

Narrow search by specifying Manufacturer

CAD

Related Categories to HSS Drills

Payment MethodMetode Pembayaran more Pelajari lebih lanjut

About MISUMITentang MISUMI

About this WebsiteTentang Website ini

Useful ToolsAlat Serbaguna

Customer ServiceLayanan Pelanggan

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) *Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) *Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB

Search by Category / Brand Pencarian dengan
Kategori / Merek

MISUMI Contact Monday to Friday (8:30am to 5:30pm) , Saturday (8:30am to 3:00pm) Order cut off time Monday to Friday: 4:30pm , Saturday : 2:00pm MISUMI Kontak Senin - Jumat (8:30 WIB - 17:30 WIB) , Sabtu (8:30WIB - 15:00 WIB) Batas Waktu Pemesanan Senin - Jumat : 16:30 WIB , Sabtu : 14:00 WIB