(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

  • Pembayaran dengan kartu kredit untuk sementara tidak tersedia karena kendala sistem. Sementara waktu Anda dapat meggunakan metode Pembayaran di Muka atau QRIS. Untuk informasi lebih lanjut, silakan hubungi Customer Service : TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. Kami mohon maaf atas ketidaknyamanan yang terjadi.
    Credit card payments are temporarily unavailable due to system issues. Meanwhile, you can use the Advance Payment method or QRIS. For further information, please contact Customer Service: TEL: 021-8984-0008 E-mail: cs@misumi.co.id. WA: 08118984008. We apologize for any inconvenience caused.
  • Sehubungan dengan adanya Peraturan Baru Kementerian Perdagangan No.36 Tahun 2023 tentang Pembatasan Impor Barang, MISUMI Indonesia melakukan tindakan pencegahan. Lihat informasi detailnya di sini
    Due to New Regulation of Ministry Of Trade No.36 of 2023 concerning retrictions on imports of goods, MISUMI Indonesia do precautions measure. See detail information here
  • Nomor telepon alternatif Kontak Layanan Pelanggan : 021-29182911| 021-29182991 | 021-29182997 | 021-29182998
    Alternative telephone number Contact Customer Service: 021-29182911 | 021-29182991 | 021-29182997 | 021-29182998

Phoenix Head Replaceable Type Drills(Coating Y/N:Available)

An indexable drill is a drill with a replaceable tip attached to the tip of the drill. Drills are tools that perform drilling, which is indispensable for machining, however, if used for a long time, the cutting edge will wear. In this case, you must either grind the cutting edge to improve cutting performance, or replace the drill body before using it. With the indexable drill, if the cutting edge becomes worn, it is possible to replace only the insert at the tip instead of the drill body, so maintenance work time and cost reduction can be expected, especially when the machining diameter is large. There are many variations in the shape and size of the drill, and the shape and material of the tip to be mounted also vary. There are drills that can handle multiple inserts, and various work materials and holes can be machined.

Search by specifying the lower class category

Days to Ship
  • All
  • 1 Day(s) or Less
  • 8 Day(s) or Less
  • 10 Day(s) or Less
  • 11 Day(s) or Less
  • 12 Day(s) or Less
  • 14 Day(s) or Less
  • 16 Day(s) or Less
  • 20 Day(s) or Less
  • 27 Day(s) or Less
  • 35 Day(s) or Less
Brand
Product Series
Days to Ship
Hole diameter (drill diameter) D(mm)
Overall Length L(mm)
Groove Length L(mm)
work material
Shank Type
Tool Material Type
With/without Oil Hole
Coating Y/N
Coating Type

    WDX Drill, for 3D Machining Depth

      WDX Drill, for 4D Machining Depth

        WDX Drill, for 2D Machining Depth

          SEC-Multi Drill, SMDH-L, for 5D

            Magic Drill DRA Type Tip

              WDX Drill, for 5D Machining Depth

                SEC-Multi Drill, SMDH-D, for 8D

                  SEC-Multi Drill, SMDH-M, for 3D

                    SEC-Multi Drill, SMDT-MEL Type

                      TA-EZ Drill TEZD-MS Type

                        Phoenix Head Interchangeable Drill PXD Head PXD-NC

                          PXDZ Phoenix Head Interchangeable Drill PXD Head 3D Type

                            SEC-Multi Drill, SMDH-B3 (for bridge)

                              SEC-Multi Drill Head SMDT-MTL

                                Tip for HT800WP Only 4111

                                  Tip for HT800WP Only 4112

                                    Tip for HT800WP Only 4113

                                      Tip for HT800WP Only 4115

                                        Tip for HT800WP Only 7632

                                          Tip for HT800WP Only 7645

                                            Tip for RT800WP Only 1047

                                              Tip for RT800WP Only 2485

                                                Phoenix Head Interchangeable Drill PXD Head PXD-PC

                                                  Phoenix Head Interchangeable Drill PXD Head PXD-KC

                                                    Throw-Away Drill, GEN3 11 Series Tip

                                                      Throw-Away Drill, GEN3 13 Series Tip

                                                        Throw-Away Drill, GEN3 18 Series Tip

                                                          Throw-Away Drill, GEN3 20 Series Tip

                                                            Throw-Away Drill, GEN3 22 Series Tip

                                                              Throw-Away Drill, GEN3 24 Series Tip

                                                                Throw-Away Drill, GEN3 26 Series Tip

                                                                  Throw-Away Drill, GEN3 29 Series Tip

                                                                    Throw-Away Drill, GEN3 32 Series Tip

                                                                      Throw-Away Drill, Standard GEN2 0/0.5 Series Tip

                                                                        Throw-Away Drill, Standard GEN2 1/1.5 Series Tip

                                                                          Throw-Away Drill, Standard GEN2 2/2.5 Series Tip

                                                                            Throw-Away Drill, Standard GEN2 3 Series Tip

                                                                              Throw-Away Drill, Standard GEN2 4 Series Tip

                                                                                Throw-Away Drill, Standard GEN2 5/6 Series Tip

                                                                                  Throw-Away Drill, 90° Angled Tip 1 Series

                                                                                    Throw-Away Drill, 90° Angled Tip 2 Series

                                                                                      Throw-Away Drill, 90° Angled Tip 3 Series

                                                                                        Throw-Away Drill, For Full Radius Machining SR Tip Y Series

                                                                                          Throw-Away Drill, For Full Radius Machining SR Tip Z Series

                                                                                            Throw-Away Drill, For Full Radius Machining SR Tip 0 Series

                                                                                            Brand

                                                                                            SUMITOMO ELECTRIC HARDMETAL

                                                                                            SUMITOMO ELECTRIC HARDMETAL

                                                                                            SUMITOMO ELECTRIC HARDMETAL

                                                                                            SUMITOMO ELECTRIC HARDMETAL

                                                                                            KYOCERA

                                                                                            SUMITOMO ELECTRIC HARDMETAL

                                                                                            SUMITOMO ELECTRIC HARDMETAL

                                                                                            SUMITOMO ELECTRIC HARDMETAL

                                                                                            SUMITOMO ELECTRIC HARDMETAL

                                                                                            DIJET

                                                                                            OSG

                                                                                            OSG

                                                                                            SUMITOMO ELECTRIC HARDMETAL

                                                                                            SUMITOMO ELECTRIC HARDMETAL

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            GUHRING

                                                                                            OSG

                                                                                            OSG

                                                                                            NGK SPARK PLUG

                                                                                            NGK SPARK PLUG

                                                                                            NGK SPARK PLUG

                                                                                            NGK SPARK PLUG

                                                                                            NGK SPARK PLUG

                                                                                            NGK SPARK PLUG

                                                                                            NGK SPARK PLUG

                                                                                            NGK SPARK PLUG

                                                                                            NGK SPARK PLUG

                                                                                            NGK SPARK PLUG

                                                                                            NGK SPARK PLUG

                                                                                            NGK SPARK PLUG

                                                                                            NGK SPARK PLUG

                                                                                            NGK SPARK PLUG

                                                                                            NGK SPARK PLUG

                                                                                            NGK SPARK PLUG

                                                                                            NGK SPARK PLUG

                                                                                            NGK SPARK PLUG

                                                                                            NGK SPARK PLUG

                                                                                            NGK SPARK PLUG

                                                                                            NGK SPARK PLUG

                                                                                            Product Series

                                                                                            WDX Drill, for 3D Machining Depth

                                                                                            WDX Drill, for 4D Machining Depth

                                                                                            WDX Drill, for 2D Machining Depth

                                                                                            SEC-Multi Drill, SMDH-L, for 5D

                                                                                            Magic Drill DRA Type Tip

                                                                                            WDX Drill, for 5D Machining Depth

                                                                                            SEC-Multi Drill, SMDH-D, for 8D

                                                                                            SEC-Multi Drill, SMDH-M, for 3D

                                                                                            SEC-Multi Drill, SMDT-MEL Type

                                                                                            TA-EZ Drill TEZD-MS Type

                                                                                            Phoenix Head Interchangeable Drill PXD Head PXD-NC

                                                                                            PXDZ Phoenix Head Interchangeable Drill PXD Head 3D Type

                                                                                            SEC-Multi Drill, SMDH-B3 (for bridge)

                                                                                            SEC-Multi Drill Head SMDT-MTL

                                                                                            Tip for HT800WP Only 4111

                                                                                            Tip for HT800WP Only 4112

                                                                                            Tip for HT800WP Only 4113

                                                                                            Tip for HT800WP Only 4115

                                                                                            Tip for HT800WP Only 7632

                                                                                            Tip for HT800WP Only 7645

                                                                                            Tip for RT800WP Only 1047

                                                                                            Tip for RT800WP Only 2485

                                                                                            Phoenix Head Interchangeable Drill PXD Head PXD-PC

                                                                                            Phoenix Head Interchangeable Drill PXD Head PXD-KC

                                                                                            Throw-Away Drill, GEN3 11 Series Tip

                                                                                            Throw-Away Drill, GEN3 13 Series Tip

                                                                                            Throw-Away Drill, GEN3 18 Series Tip

                                                                                            Throw-Away Drill, GEN3 20 Series Tip

                                                                                            Throw-Away Drill, GEN3 22 Series Tip

                                                                                            Throw-Away Drill, GEN3 24 Series Tip

                                                                                            Throw-Away Drill, GEN3 26 Series Tip

                                                                                            Throw-Away Drill, GEN3 29 Series Tip

                                                                                            Throw-Away Drill, GEN3 32 Series Tip

                                                                                            Throw-Away Drill, Standard GEN2 0/0.5 Series Tip

                                                                                            Throw-Away Drill, Standard GEN2 1/1.5 Series Tip

                                                                                            Throw-Away Drill, Standard GEN2 2/2.5 Series Tip

                                                                                            Throw-Away Drill, Standard GEN2 3 Series Tip

                                                                                            Throw-Away Drill, Standard GEN2 4 Series Tip

                                                                                            Throw-Away Drill, Standard GEN2 5/6 Series Tip

                                                                                            Throw-Away Drill, 90° Angled Tip 1 Series

                                                                                            Throw-Away Drill, 90° Angled Tip 2 Series

                                                                                            Throw-Away Drill, 90° Angled Tip 3 Series

                                                                                            Throw-Away Drill, For Full Radius Machining SR Tip Y Series

                                                                                            Throw-Away Drill, For Full Radius Machining SR Tip Z Series

                                                                                            Throw-Away Drill, For Full Radius Machining SR Tip 0 Series

                                                                                            Days to Ship 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 12 Day(s) or more 8 Day(s) or more 12 Day(s) or more 8 Day(s) or more 8 Day(s) or more 12 Day(s) or more 27 Day(s) or more 27 Day(s) or more 27 Day(s) or more 27 Day(s) or more 27 Day(s) or more 27 Day(s) or more 27 Day(s) or more 27 Day(s) or more 8 Day(s) or more 8 Day(s) or more 12 Day(s) or more 8 Day(s) or more 16 Day(s) or more 16 Day(s) or more 16 Day(s) or more 16 Day(s) or more 16 Day(s) or more 16 Day(s) or more 16 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 8 Day(s) or more 16 Day(s) or more 16 Day(s) or more 16 Day(s) or more 16 Day(s) or more 16 Day(s) or more 16 Day(s) or more
                                                                                            Hole diameter (drill diameter) D(mm)13 ~ 14313 ~ 6313 ~ 6812.0 or more, less than 12.5 ~ Over 41.0, and 42.5 or less7.94 ~ 25.513 ~ 3613.5 or more and 14.5 or less ~ Over 41.0, and 42.5 or less12.5 or more, less than 13.0 ~ Over 39.5, and 41.0 or less19.5 ~ 2214 ~ 3214 ~ 25.4-24.5~24.7 ~ 26.5~26.717 ~ 23.5------34 ~ 40.534 ~ 40.514 ~ 25.414 ~ 25.4-------29 ~ 3132 ~ 35--26.5 ~ 3535.5 ~ 47.547 ~ 6564 ~ 8819.05 ~ 22.2331.7538.1 ~ 47.63---
                                                                                            Overall Length L(mm)101 ~ 314114 ~ 36288 ~ 289.7130 ~ 335-127 ~ 278191.5 ~ 460105 ~ 230----170 ~ 175--------------------------------
                                                                                            Groove Length L(mm)42 ~ 21255 ~ 26029 ~ 14469 ~ 235-68 ~ 184124.5 ~ 36044 ~ 135---63.4 ~ 11287 ~ 92--------------------------------
                                                                                            work materialgeneral steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎]general steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎]general steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎]general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]general steel[○/◎] / Stainless Steel[○/◎] / Cast Iron[○/◎]general steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎]general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]general steel[○] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]general steel[◎] / high hardness steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○]general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]Aluminum[◎] / Copper[○]-general steel[○]general steel[◎] / high hardness steel[○] / Stainless Steel[○] / Cast Iron[◎]-general steel[○]Cast Iron[○]Stainless Steel[○]----general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○]general steel[○] / Quenched and tempered steel[○] / Cast Iron[◎]Stainless Steel[○] / Titanium[○]Stainless Steel[○] / Titanium[○]Stainless Steel[○] / Cast Iron[○] / Titanium[○]Stainless Steel[○] / Cast Iron[○] / Titanium[○]Stainless Steel[○] / Cast Iron[○] / Titanium[○]Stainless Steel[○] / Cast Iron[○] / Titanium[○]Stainless Steel[○] / Cast Iron[○] / Titanium[○]Stainless Steel[○] / Cast Iron[○] / Titanium[○]Stainless Steel[○] / Cast Iron[○] / Titanium[○]general steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]general steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]general steel[○] / Cast Iron[○] / Titanium[○]general steel[○] / Cast Iron[○] / Titanium[○]general steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○]general steel[○] / Cast Iron[○] / Titanium[○]general steel[○] / Aluminum[○]general steel[○] / Aluminum[○]general steel[○] / Aluminum[○]general steel[○] / Cast Iron[○]general steel[○] / Cast Iron[○]general steel[○] / Cast Iron[○]
                                                                                            Shank Type---------------------------------------------
                                                                                            Tool Material Type--------------CarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbide--CarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbideCarbidePowder high-speed steel / CarbidePowder high-speed steel / CarbidePowder high-speed steel / CarbidePowder high-speed steelPowder high-speed steelPowder high-speed steelPowder high-speed steelPowder high-speed steelPowder high-speed steelPowder high-speed steelPowder high-speed steelPowder high-speed steel
                                                                                            With/without Oil HoleAvailableAvailableAvailableAvailable-AvailableAvailableAvailableAvailable---AvailableAvailableNANANANANANANANA-----------------------
                                                                                            Coating Y/NAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailableAvailable
                                                                                            Coating TypeTiAlNTiAlNTiAlNFor High Hardness (Silicon Group)-TiAlNFor High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)OtherOtherOtherFor High Hardness (Silicon Group)For High Hardness (Silicon Group)OtherOtherOtherOtherTiAlNTiNTiNOtherOtherOtherFor General Steels (AlCrN, etc.)For General Steels (AlCrN, etc.)For General Steels (AlCrN, etc.)For General Steels (AlCrN, etc.)For General Steels (AlCrN, etc.)For General Steels (AlCrN, etc.)For General Steels (AlCrN, etc.)For General Steels (AlCrN, etc.)For General Steels (AlCrN, etc.)For General Steels (AlCrN, etc.) / TiNFor General Steels (AlCrN, etc.) / TiNFor General Steels (AlCrN, etc.)For General Steels (AlCrN, etc.)For General Steels (AlCrN, etc.) / TiCN / TiNFor General Steels (AlCrN, etc.)TiNTiNTiNTiCNTiCNTiCN

                                                                                            Loading...

                                                                                            Related Categories to Phoenix Head Replaceable Type Drills